Update the root YAML and the examples for the UART and CAN declarations, the RS485 block and the Board Options section.
103 lines
4.1 KiB
YAML
103 lines
4.1 KiB
YAML
# Updated : 2026.02.16
|
|
# Version : 1.1.5
|
|
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
|
|
|
# YamBMS ( Yet another multi-BMS Merging Solution )
|
|
|
|
# This YAML is free software: you can redistribute it and/or
|
|
# modify it under the terms of the GNU General Public License
|
|
# as published by the Free Software Foundation, either version 3
|
|
# of the License, or (at your option) any later version.
|
|
#
|
|
# This program is distributed in the hope that it will be useful,
|
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
|
# See the GNU General Public License for more details.
|
|
#
|
|
# You should have received a copy of the GNU General Public License
|
|
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
|
|
|
|
############################ Local Packages Example ############################
|
|
|
|
# This is not a working YAML but just code ready to copy into
|
|
# your main YAML below the `packages:` section.
|
|
|
|
################################################################################
|
|
|
|
packages:
|
|
|
|
# The sniffer represents the ESP node connected to the JK-BMS PB RS485 bus
|
|
# If address 0x00 is not detected on the RS485 bus, the sniffer will act directly as a master BMS (mode 2, max 15 BMS)
|
|
|
|
sniffer1: !include
|
|
file: packages/bms/bms_combine_JK_RS485_Modbus_sniffer.yaml
|
|
vars:
|
|
sniffer_protocol: 'JK02_32S'
|
|
sniffer_uart_id: 'uart_esp_1'
|
|
# uart_flow_control_pin: ${talk_pin} # WS-RS485-CAN and other RS485 boards with a flow_control_pin
|
|
|
|
# Mode2 : configure the DIP switches of your BMS from 0x01 to 0x0F (don't use the 0x00 address, maximum 15 BMS)
|
|
bms1: !include
|
|
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
|
|
vars:
|
|
bms_id: '1' # must be a number
|
|
bms_name: 'JK-BMS 1'
|
|
bms_address: '0x01' # BMS 1 DIP switch
|
|
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
|
|
|
bms2: !include
|
|
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
|
|
vars:
|
|
bms_id: '2' # must be a number
|
|
bms_name: 'JK-BMS 2'
|
|
bms_address: '0x02' # BMS 2 DIP switch
|
|
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
|
|
|
bms3: !include
|
|
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
|
|
vars:
|
|
bms_id: '3' # must be a number
|
|
bms_name: 'JK-BMS 3'
|
|
bms_address: '0x03' # BMS 3 DIP switch
|
|
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
|
|
|
bms4: !include
|
|
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
|
|
vars:
|
|
bms_id: '4' # must be a number
|
|
bms_name: 'JK-BMS 4'
|
|
bms_address: '0x04' # BMS 4 DIP switch
|
|
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
|
|
|
bms5: !include
|
|
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
|
|
vars:
|
|
bms_id: '5' # must be a number
|
|
bms_name: 'JK-BMS 5'
|
|
bms_address: '0x05' # BMS 5 DIP switch
|
|
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
|
|
|
bms6: !include
|
|
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
|
|
vars:
|
|
bms_id: '6' # must be a number
|
|
bms_name: 'JK-BMS 6'
|
|
bms_address: '0x06' # BMS 6 DIP switch
|
|
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
|
|
|
bms7: !include
|
|
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
|
|
vars:
|
|
bms_id: '7' # must be a number
|
|
bms_name: 'JK-BMS 7'
|
|
bms_address: '0x07' # BMS 7 DIP switch
|
|
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
|
|
|
bms8: !include
|
|
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
|
|
vars:
|
|
bms_id: '8' # must be a number
|
|
bms_name: 'JK-BMS 8'
|
|
bms_address: '0x08' # BMS 8 DIP switch
|
|
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|