57 lines
3.9 KiB
Markdown
57 lines
3.9 KiB
Markdown
# YamBMS - M5Stack AtomS3, the Plug & Play solution (no welding)
|
|
|
|
[](https://www.gnu.org/licenses/gpl-3.0)
|
|
[](https://github.com/Sleeper85/esphome-yambms/releases/latest)
|
|

|
|

|
|

|
|
|
|
> [!IMPORTANT]
|
|
> AtomS3 provides very few GPIOs.
|
|
> This solution is not the best for supervising a large number of `JK-B BMS` via `UART` but it works very well for supervising a large number of `JK-PB BMS` via `RS485`.
|
|
|
|
> [!TIP]
|
|
> If you have `JK-PB BMS` (inverter BMS) and want to monitor them via `RS485`, please read the [BMS JK-PB RS485](BMS_JK-PB_RS485_solution.md) dedicated topic.
|
|
|
|
## Number of BMS supported
|
|
|
|
* 3x BMS with `Bluetooth` (BLE stack consumes significant amount of RAM on device and can cause crash and reboot)
|
|
* 2x `JK-B` BMS with `UART/RS485` (the second UART must be soldered on the Atomic CAN base on GPIOs G7 and G8)
|
|
* several `JK-PB` BMS with `RS485` (already tested with 7 BMS)
|
|
|
|
Note: these are theoretical limits, not all combinations have been tested.
|
|
|
|
## List of M5Stack components that can be used depending on needs
|
|
|
|
> [!TIP]
|
|
> Choose an `AtomS3` to clip onto the `Atomic CAN Base`.
|
|
> Feel free to ask your question on the [DIY solar forum](https://diysolarforum.com/threads/yambms-jk-bms-can-with-new-cut-off-charging-logic-open-source.79325/) if you don't know what to choose.
|
|
|
|
- [AtomS3 Lite - SKU:C124](https://docs.m5stack.com/en/core/AtomS3%20Lite)
|
|
- [AtomS3 - SKU:C123](https://docs.m5stack.com/en/core/AtomS3)
|
|
- [AtomS3R - SKU:C126 (8MB PSRAM)](https://docs.m5stack.com/en/core/AtomS3R)
|
|
- [Atomic CAN Base - SKU:A103 (recommended)](https://docs.m5stack.com/en/atom/Atomic%20CAN%20Base)
|
|
- [CAN Unit - SKU:U085](https://docs.m5stack.com/en/unit/can)
|
|
- [RS485 Unit - SKU:U094](https://docs.m5stack.com/en/unit/iso485)
|
|
|
|
| [AtomS3 Lite](https://docs.m5stack.com/en/core/AtomS3%20Lite) | [AtomS3](https://docs.m5stack.com/en/core/AtomS3) | [AtomS3R (8MB PSRAM)](https://docs.m5stack.com/en/core/AtomS3R) |
|
|
| --- | --- | --- |
|
|
| <img src="../../images/MCU_AtomS3_Lite.png" width="300"> | <img src="../../images/MCU_AtomS3.png" width="300"> | <img src="../../images/MCU_AtomS3R.png" width="300"> |
|
|
|
|
| [Atomic CAN Base (isolated)](https://docs.m5stack.com/en/atom/Atomic%20CAN%20Base) | [CAN Unit (isolated)](https://docs.m5stack.com/en/unit/can) | [RS485 Unit (isolated)](https://docs.m5stack.com/en/unit/iso485) |
|
|
| --- | --- | --- |
|
|
| <img src="../../images/CAN_Transceiver_M5Stack_Atomic_CAN_Base.png" width="300"> | <img src="../../images/CAN_Transceiver_M5Stack_CAN_Unit.png" width="300"> | <img src="../../images/RS485_Transceiver_M5stack_SKU-U094_RS485_Isolated_Unit.png" width="300"> |
|
|
|
|
## Note regarding the sensors managing the display backlight (ili9xxx platform)
|
|
|
|
* **Backlight control** : manual brightness control
|
|
* **Backlight max level** : limit the max brightness in general
|
|
* **Backlight Autodim level** : the desired brightness when dimmed down (set to 0 to switch off screen completely instead of dimming down)
|
|
* **Backlight Autodim time in min** : time in minutes, after the screen will dim down (set to 0 to disable Auto dimming)
|
|
|
|
Device will restore last screen brightness after boot, but the timer script does not get start automatically.
|
|
The auto dim timer gets initially started by pressing the screen button (which bumps up the brightness to 100% until the timer dims down then).
|
|
|
|
That seems to be the easiest and lightweight solution.
|
|
But i guess some user could be confused and expect from the device to react immediately after changing some parameters.
|