Files
esphome-yambms/documents/README/Shunt_Victron_SmartShunt.md
T
2025-04-20 22:37:27 +02:00

60 lines
3.1 KiB
Markdown

# Victron SmartShunt
[![Badge License: GPLv3](https://img.shields.io/badge/License-GPLv3-brightgreen.svg)](https://www.gnu.org/licenses/gpl-3.0)
[![Badge Version](https://img.shields.io/github/v/release/Sleeper85/esphome-yambms?include_prereleases&color=yellow&logo=DocuSign&logoColor=white)](https://github.com/Sleeper85/esphome-yambms/releases/latest)
![GitHub stars](https://img.shields.io/github/stars/Sleeper85/esphome-yambms)
![GitHub forks](https://img.shields.io/github/forks/Sleeper85/esphome-yambms)
![GitHub watchers](https://img.shields.io/github/watchers/Sleeper85/esphome-yambms)
## UART : Schematic
> [!CAUTION]
> [Please read this page about setting up galvanic isolation of the `UART-TTL` connection.](Galvanic_isolation.md)
> [!TIP]
> If you are unsure about to pin order please measure the voltage between GND and VCC (5V). If you measure a positive voltage you know the position of VCC and GND!
```
┌─────────────────┐ ┌──────────┐ ┌───────────┐
│ 5V o│<----5V---V1>│ |<V2---3V3--->| |
│ Victron RX o│<---------AO<│ UART-TTL │<AI-------TX<| ESP32 |
│ SmartShunt TX o│>---------AI>│ ISOLATOR │>BO-------RX>| |
│ GND o│<----GND---->│ │<----GND---->| |
└─────────────────┘ └──────────┘ └───────────┘
# UART-TTL VE.Direct port (JST-PH 2.0mm pinch)
┌─── ─────── ────┐
│ │
│ O O O O │
│GND RX TX VCC │
└────────────────┘
│ │ │ └ 5V
│ │ └──── TX to TTL-isolator AI (input)
│ └──────── RX to TTL-isolator AO (output)
└──────────── GND to TTL-isolator GND
```
## Bluetooth : How to retrieve MAC address and encryption key
To connect to your Victron device with BLE component you must have two information :
- `mac_address` - Bluetooth mac address of device.
- `encryption_key` - AES encryption key.
Use [VictronConnect App v5.93](https://www.victronenergy.com/live/victronconnect:beta) (or later) released on 2023-08-25.
Connect to the SmartShunt via Bluetooth under the `Local` tab.
![VictronConnect App Local page](../../images/Victron_SmartShunt_App_00_Local.jpg)
![VictronConnect App Settings page](../../images/Victron_SmartShunt_App_01_Settings.png)
![VictronConnect App Product info page](../../images/Victron_SmartShunt_App_02_ProductInfo.png)
![VictronConnect App Instant readout encryption data](../../images/Victron_SmartShunt_App_03_EncryptionData.png)
1. Open `Settings` of Device.
2. Open `Product Info` page.
3. Ensure `Instant readout via Bluetooth` is enabled.
4. Bottom of page press `SHOW` for Instant readout details Encryption data.
When connected to the device via VictronConnect App no Instant readout (Bluetooth advertising) data is generated.