Files
esphome-yambms/documents/README/dev/Project_structure.md
T
Sleeper85 ee12380087 YamBMS: Inverter brand registry and RS485 entry point
Rename the inverter registry to yambms_brand_registry.yaml and add the new brands.
yambms_rs485.yaml becomes the file to include, with a rs485_protocol var that
selects PYLON or Voltronic LIB.
2026-11-08 23:08:34 +01:00

3.3 KiB

Project structure

YamBMS is a set of ESPHome YAML packages — there is no compiled application code beyond a few embedded C++ lambdas. It merges data from several BMS / Shunt / Balancer units and drives an inverter over CAN or RS485 (PYLON / SMA / Victron / LuxPower). All the logic lives in YAML (substitutions, packages: !include, lambda:) and is assembled by the ESPHome compiler.

Entry points

  • YamBMS_LP_*.yaml — Local Packages. Requires the packages/ folder to be present locally.

  • YamBMS_RP_*.yaml — Remote Packages. Pulls the packages from GitHub (!include on a github:// URL). This is what most users run.

    Differences and structure are detailed in YamBMS_LP_YAML.md and YamBMS_RP_YAML.md.

  • YamBMS_Local_Packages_example.yaml / YamBMS_Remote_Packages_example.yaml — starting templates.

  • yambms_config.yaml — Modbus substitutions shared between several nodes in a multi-node setup.

  • yambms_custom.yaml — snippets meant to be copy-pasted into the main YAML (extra switches and services). Not included by default.

  • examples/single-node/ and examples/multi-node/ — ready-to-copy !include blocks for a given BMS, Shunt or Balancer.

The packages/ tree

base/

Generic device building block: ESPHome core, WiFi, Ethernet, sub_device declarations, the fault registry (device_base_fault_registry.yaml), memory and PSRAM debug helpers.

board/

One file per board (board_ESP32-S3_*.yaml) defining pins and GPIO. The board_options_*.yaml files are optional building blocks — UART, CAN, PSRAM, LVGL display, WiFi AP — included separately depending on the hardware.

bms/, shunt/, balancer/

All three follow the same layered scheme, per brand and protocol:

File pattern Role
*_combine_<Brand>_<Interface>_<variant>.yaml The file you include from your main YAML. Assembles the layers below.
*_modbus_<Brand>_*.yaml Modbus register mapping (RS485/Modbus BMS only).
*_sensors_<Brand>_*.yaml Declaration of the exposed ESPHome entities.
*_errors_bitmask_<Brand>.yaml Alarm bit mapping.
*_base*.yaml Brand-agnostic shared logic: combining engine, SoC/SoH, cycles, LED.

yambms/

The central engine. yambms.yaml aggregates yambms_brand_registry.yaml, yambms_core.yaml, the yambms_auto_*.yaml functions (CVL / CCL / DCL / Float / EOC / temperature / SoC limit) and yambms_service.yaml, then yambms_canbus*.yaml or yambms_rs485*.yaml for the link to the inverter.

yambms_brand_registry.yaml holds the protocol dictionary (YB_PROTO_*), the brand to protocol mapping and the per-couple battery mode and note. Both inverter buses read it.

On the RS485 side, yambms_rs485.yaml is the entry point — selects, diagnostics, telemetry slot — and it includes the protocol implementation, currently yambms_rs485_pylon.yaml.

Where the behaviour is documented

The structure above tells you where code lives, not what it does. For the charging logic and the auto functions, read: