Create board_xiao-s3.yaml
This commit is contained in:
1 parent
0455cba2da
commit
0b980a7f42
1 file changed
+103
@@ -0,0 +1,103 @@
|
||||
# Updated : 2025.01.14
|
||||
# Version : 1.0
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
# YamBMS ( Yet another multi-BMS Merging Solution )
|
||||
|
||||
# This YAML is free software: you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License
|
||||
# as published by the Free Software Foundation, either version 3
|
||||
# of the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
# See the GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
|
||||
|
||||
substitutions:
|
||||
board_chip: "ESP32-S3"
|
||||
board_name: "DevKitC-1"
|
||||
|
||||
esp32:
|
||||
board: esp32-s3-devkitc-1
|
||||
flash_size: 8MB # adjust according to your ESP32-S3 version
|
||||
framework:
|
||||
type: esp-idf
|
||||
|
||||
esphome:
|
||||
platformio_options:
|
||||
board_build.flash_mode: dio # use Dual IO (dio) instead of Quad IO (qio) to prevent boot loop after flashing
|
||||
board_upload.maximum_ram_size: 524288 # total size of the internal RAM in bits, it's the same for all ESP32-S3 ( 512KB )
|
||||
|
||||
# PSRAM activation and settings
|
||||
psram:
|
||||
mode: octal
|
||||
speed: 80MHz
|
||||
|
||||
# <<: !include board_psram_settings.yaml
|
||||
|
||||
wifi:
|
||||
id: my_network
|
||||
ssid: !secret wifi_ssid
|
||||
password: !secret wifi_password
|
||||
domain: !secret domain
|
||||
ap:
|
||||
ssid: "YamBMS Fallback Hotspot"
|
||||
password: "Y4mBM$85"
|
||||
|
||||
captive_portal:
|
||||
|
||||
logger:
|
||||
baud_rate: 0 # frees the 3rd UART and avoids some bugs like "WK2168 with canbus" or "BLE client with RS485 modbus"
|
||||
hardware_uart: USB_SERIAL_JTAG
|
||||
|
||||
uart:
|
||||
# UART 0 : USB UART port used for ESP32 flashing and logs, can be released if necessary (tx_pin: 43, rx_pin: 44)
|
||||
# UART 1
|
||||
- id: uart_esp_1
|
||||
tx_pin: 2
|
||||
rx_pin: 1
|
||||
baud_rate: 115200
|
||||
rx_buffer_size: 512
|
||||
# UART 2
|
||||
- id: uart_esp_2
|
||||
tx_pin: 4
|
||||
rx_pin: 3
|
||||
baud_rate: 115200
|
||||
rx_buffer_size: 512
|
||||
# UART 3
|
||||
- id: uart_esp_3
|
||||
tx_pin: 9
|
||||
rx_pin: 10
|
||||
baud_rate: 115200
|
||||
rx_buffer_size: 512
|
||||
|
||||
canbus:
|
||||
# CANBUS NODE 1
|
||||
- platform: esp32_can
|
||||
id: canbus_node1
|
||||
tx_pin: 5 # to CAN board CTX
|
||||
rx_pin: 6 # to CAN board CRX (with 4.7K resistor except for SN65HVD230)
|
||||
can_id: 1
|
||||
bit_rate: 500kbps
|
||||
|
||||
# +--------------------------------------+
|
||||
# | Inverter Heartbeat Light |
|
||||
# +--------------------------------------+
|
||||
|
||||
light:
|
||||
# ESP Light used to see the inverter heartbeat
|
||||
# Internal : only specifying an id without a name will implicitly set this to true.
|
||||
- platform: binary
|
||||
output: esp_led
|
||||
id: esp_light
|
||||
|
||||
output:
|
||||
# ESP LED
|
||||
- platform: gpio
|
||||
pin: GPIO21
|
||||
id: esp_led
|
||||
inverted: true
|
||||
Reference in new issue
Block a user