Update yambms_remote_packages_example.yaml

This commit is contained in:
Sleeper85 committed 2025-03-24 17:17:39 +01:00
1 parent f357d23751
commit 9977cc5963
1 file changed
+52 -34
+52 -34
View File
@@ -1,4 +1,4 @@
# Updated : 2025.03.21
# Updated : 2025.03.24
# Version : 1.5.4
# GitHub : https://github.com/Sleeper85/esphome-yambms
@@ -26,22 +26,62 @@ ota:
api:
reboot_timeout: 0s
# Don't forget to configure your WiFi credentials in the secrets.yaml file
#
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
# +--------------------------------------+
# | Global Settings |
# +--------------------------------------+
substitutions:
name: yambms # ESP32 name / hostname
# YamBMS settings
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_id: 'yambms1'
yambms_name: 'YamBMS 1'
# Shunt settings
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# Maximum charging cycles is used to calculate the battey SOH, LF280K v3 =8000.0, LF280K v2 =6000.0, LF280=3000.0 (decimal is required)
yambms_max_cycles: '6000.0'
# +--------------------------------------+
# | Shunt Settings |
# +--------------------------------------+
shunt_update_interval: '3s' # frequency at which Shunt data is refreshed
shunt_combine_interval: '1s' # frequency at which Shunt data is combined in YamBMS
# BMS settings
bms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# +--------------------------------------+
# | BMS Settings |
# +--------------------------------------+
bms_update_interval: '3s' # frequency at which BMS data is refreshed, going below '3s' can cause problems
bms_combine_interval: '1s' # frequency at which BMS data is combined in YamBMS
bms_cutoff_timer: '60s' # time during which the end of charge conditions must be respected (cut-off + cells not equalizing)
bms_cutoff_timer: '50s' # time during which the end of charge conditions must be respected (cut-off + cells not equalizing)
# +--------------------------------------+
# | Packages |
@@ -94,31 +134,9 @@ packages:
refresh: 0s
files:
- path: 'packages/yambms/yambms.yaml'
vars:
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# Maximum charging cycles is used to calculate the battey SOH, LF280K v3 =8000.0, LF280K v2 =6000.0, LF280=3000.0 (decimal is required)
yambms_max_cycles: '6000.0'
# - path: 'packages/yambms/yambms_custom.yaml'
# yambms_custom: !include packages/yambms/yambms_custom.yaml
canbus1:
url: https://github.com/Sleeper85/esphome-yambms
@@ -131,9 +149,9 @@ packages:
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_node1'
canbus_light_id: 'esp_light'
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
canbus_link_timer: '6s'
# The CANBUS link will be considered down if no response from the inverter (0x305 frame) for 5s
# The Deye inverter sends the ACK 0x305 only when it receives the 0x356 frame.
canbus_link_timer: '5s'
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |