Moved Auto CCL Current Taper section

This commit is contained in:
Sleeper85 committed 2026-11-08 23:08:33 +01:00
1 parent e4b8aacc0a
commit b7bb2e93ea
1 file changed
+16 -17
+16 -17
View File
@@ -429,23 +429,6 @@ Afterwards the battery is then discharged, however `Requested Charge Current (CC
`Auto SoC Limit` - `Auto SoC Hysteresis` = `80%` - `5%` = `75%`. Without this, the `SoC` would oscillate between
`79%` and `80%`, stressing components unnecessary.
## Inverter Heartbeat Monitoring
![Image](../../images/YamBMS_Inverter_Heartbeat.png "YamBMS_Inverter_Heartbeat")
This feature allows you to monitor the heartbeat of your inverter (time between two ACK 0x305). This is useful for troubleshooting purposes and should not remain enabled continuously.
This heartbeat must be regular and depends on the selected `CAN protocol` and the behavior of the inverter. If the heartbeat is not regular this can show a problem on the inverter side or an overloaded ESP32.
The `Deye` inverter sends an ACK `0x305` in response to the reception of a CAN frame `0x356`. Knowing that CAN frames are sent every `100ms` and that the CAN protocol `PYLON 1.2` has 6 CAN frames, the heartbeat of the `Deye` inverter is `600ms`.
> [!IMPORTANT]
> Every `2h` Deye takes more than `3s` to respond and more than `5s` at midnight.
> This is what the `CANBUS Status` looks like when the `canbus_link_timer` is set to `3s`.
![Image](../../images/YamBMS_CANBUS_Status.png "YamBMS_CANBUS_Status")
## Auto CCL Current Taper
Optional Auto CCL package (`yambms_auto_ccl_current_taper.yaml`).
@@ -495,6 +478,22 @@ Notes:
- If you taper toward near zero, you may also need a higher cut-off voltage or a longer cut-off timer to avoid an early `Cut-Off`.
- Pair with `Charger Offset V.` when the inverter undershoots bulk.
## Inverter Heartbeat Monitoring
![Image](../../images/YamBMS_Inverter_Heartbeat.png "YamBMS_Inverter_Heartbeat")
This feature allows you to monitor the heartbeat of your inverter (time between two ACK 0x305). This is useful for troubleshooting purposes and should not remain enabled continuously.
This heartbeat must be regular and depends on the selected `CAN protocol` and the behavior of the inverter. If the heartbeat is not regular this can show a problem on the inverter side or an overloaded ESP32.
The `Deye` inverter sends an ACK `0x305` in response to the reception of a CAN frame `0x356`. Knowing that CAN frames are sent every `100ms` and that the CAN protocol `PYLON 1.2` has 6 CAN frames, the heartbeat of the `Deye` inverter is `600ms`.
> [!IMPORTANT]
> Every `2h` Deye takes more than `3s` to respond and more than `5s` at midnight.
> This is what the `CANBUS Status` looks like when the `canbus_link_timer` is set to `3s`.
![Image](../../images/YamBMS_CANBUS_Status.png "YamBMS_CANBUS_Status")
## Diagnostic
Useful information for troubleshooting.