Fixed issue #187

This commit is contained in:
Sleeper85 committed 2026-02-02 14:25:04 +01:00
1 parent b0a4c6c645
commit d4e0ff02d6
1 file changed
+10 -12
+10 -12
View File
@@ -132,12 +132,11 @@ To connect an RS485 device to any of the configured RS485 ports:
| GND | DG : Data/Device Ground (optional but recommended) |
**Wiring Steps:**
1. Ensure the port is configured for RS485 mode using the onboard jumpers
2. Identify the A and B wires from your RS485 device (often labeled as D+/D- or A/B)
3. Connect the **A wire (D+)** to the **L pin** of the RS485 port
4. Connect the **B wire (D-)** to the **H pin** of the RS485 port
5. **Connect the ground wire** to the **DG pin** for common reference (highly recommended)
6. If using **shielded cable**, connect the shield to the **SG pin** (recommended for noisy environments)
1. Identify the A and B wires from your RS485 device (often labeled as D+/D- or A/B)
2. Connect the **A wire (D+)** to the **L pin** of the RS485 port
3. Connect the **B wire (D-)** to the **H pin** of the RS485 port
4. **Connect the ground wire** to the **DG pin** for common reference (highly recommended)
5. If using **shielded cable**, connect the shield to the **SG pin** (recommended for noisy environments)
**Ground Connection Best Practices:**
- **Always connect DG (Data Ground)** to provide a common reference between devices
@@ -169,12 +168,11 @@ To connect a CAN bus device to the CAN port:
| GND | DG : Data/Device Ground (optional but recommended) |
**Wiring Steps:**
1. Ensure the port is configured for CAN mode using the onboard jumpers
2. Identify the CAN H and CAN L wires from your CAN device
3. Connect the **CAN H wire** to the **H pin** of the CAN port
4. Connect the **CAN L wire** to the **L pin** of the CAN port
5. **Connect the ground wire** to the **DG pin** for common reference (optional but recommended)
6. If using **shielded cable**, connect the shield to the **SG pin** (recommended for noisy environments)
1. Identify the CAN H and CAN L wires from your CAN device
2. Connect the **CAN H wire** to the **H pin** of the CAN port
3. Connect the **CAN L wire** to the **L pin** of the CAN port
4. **Connect the ground wire** to the **DG pin** for common reference (optional but recommended)
5. If using **shielded cable**, connect the shield to the **SG pin** (recommended for noisy environments)
**Ground Connection Best Practices:**
- **Always connect DG (Data Ground)** to provide a common reference between devices