Andrew Rankin
59cb64181e
Correct min/max cells ( #140 )
2025-12-18 19:06:40 +00:00
Sleeper85
84eb560c66
Fixed bms and shunt modbus client sub_device_id
2025-12-18 00:21:32 +01:00
Sleeper85
6bc6b5b54e
Added talk_pin substitution
2025-12-17 22:57:13 +01:00
Sleeper85
da8e3f0200
Fixed sub_device
2025-12-17 22:04:05 +01:00
Sleeper85
e8cdadce56
JK RS485 cell balancing trigger voltage name
2025-12-17 19:36:30 +01:00
Sleeper85
eaf65ded61
Increase LFP cv_min to 3.375
2025-12-17 19:22:19 +01:00
MrPabloUK
547b824b5e
Sub device support ( #134 )
2025-12-17 00:42:53 +01:00
Sleeper85
a3fe73c3a2
Added the last PR #12421
2025-12-16 09:46:43 +01:00
Andrew Rankin
a9394095d2
[EG4] Swap away from esphome modbus component ( #130 )
...
* Rebase was a mess, so re-adding based on the dev branch.
* updates for the 1.6.0 release / dev branch to compile.
* Update external component source version
* Updated the external component source version from main to v1.0.0.
* Update external component source version to v1.0.0
* Add an example for EG4.
2025-12-15 10:06:21 +01:00
Sleeper85
ea30ea145c
BMS fake sensors 1.2.0
2025-12-15 09:39:27 +01:00
Sleeper85
b2c5f65478
Reorganization of variables
2025-12-09 02:45:05 +01:00
Sleeper85
de6d37e308
YamBMS modbus dev YAMLs
2025-12-05 22:05:41 +01:00
Sebastian
147a176748
Round requested charge/discharge current to nearest integer ( #117 )
...
Because of temperature based current limitation, the requested charge/discharge current could be non-integer values. For the used high-power applications, sub 1A precision is not required and may add noise.
2025-11-26 00:11:53 +01:00
Sleeper85
9847a53755
New Multi-node BMS names
2025-11-26 00:07:16 +01:00
Sleeper85
9e196afef3
Remove the non-functional SEPLOS V3 version ( #94 )
2025-11-26 00:04:34 +01:00
Sleeper85
8ce4d7d255
YamBMS 1.6.0 - Fixed issue #116
2025-11-25 08:44:03 +01:00
Sleeper85
6cbf9d72d5
YamBMS 1.6.0 - Max requested current in A
2025-11-25 00:08:49 +01:00
Sleeper85
4fa50d1c5f
Improved Remaining Capacity when using a shunt ( #102 )
2025-11-24 19:52:28 +01:00
Sleeper85
e2de6d6724
Fixed update_interval
2025-11-24 17:02:10 +01:00
Sleeper85
428f9115c9
AtomS3 GPIOs for Atomic RS485 base (uart_esp_3)
2025-11-24 16:56:30 +01:00
Sleeper85
dcbf3e6b8a
YamBMS 1.6.0 - 2025.11.23
2025-11-24 14:34:30 +01:00
Sleeper85
6107f9e365
Create bms_modbus_PACE_RS485_bms_full.yaml
2025-11-24 01:45:52 +01:00
Sleeper85
48cf6da6c2
Create board_options_itf_uart_flow_control.yaml
2025-11-23 23:49:31 +01:00
Sleeper85
af0ac536a2
Code standardization (auto functions)
2025-11-23 17:46:31 +01:00
5hortCircuit
59ad20f447
Adding FLIP_C3 board ( #112 )
...
* Adding FLIP_C3 board
The FLIP_C3 is a simple ESP32-C3 board that has an integrated power supply that has a 60V input. This board can be connected directly to a 48V battery and then be used with the M5Stack Isolated RS485 Unit (U094) to get a RS485 connection back to the master unit. I successfully used 4 of these units to communicate with the JK-BMS B-Series BMS's. The FLIP_C3 has an onboard 5V regulator that can power the RS485 module, 2 UART exposed on connectors that can be used for TTL to the BMS and TTL to the RS485 module. In the US it is available on Amazon, product page: https://wiki.vdbx.io/product/flip_c3
* Added missing GPIOs to FLIP_C3 board
2025-11-22 10:20:19 +01:00
Sleeper85
a90071bd87
New BMS battery_capacity_remaining manipulated sensor (issue #96 )
2025-11-17 00:12:04 +01:00
Sleeper85
a1a2ce9e19
Improved SEPLOS V1 V2 examples
2025-11-15 00:19:38 +01:00
Sleeper85
68a7a6aac6
Added SEPLOS V3 sniffer version
2025-11-14 23:35:59 +01:00
Sleeper85
866c4b39a0
Added talk_pin to ESP32-S3_WS-RS485-CAN board
2025-11-14 23:30:57 +01:00
Sleeper85
beb9139d90
Fixed balance_trigger_voltage and equalizing IDs
2025-10-25 13:09:56 +02:00
Sleeper85
ff8ab4f21e
Added Shunt Modbus FAKE
2025-10-25 13:07:33 +02:00
Sleeper85
22c0336e8e
Added ${sniffer_id} to Broadcasting JK-PB settings to all BMS switch
2025-10-22 19:10:48 +02:00
Sleeper85
67ef67995a
Basen BMS: Use new binary sensors for charging/discharging
2025-10-21 14:03:08 +02:00
Sleeper85
e5645d3bfb
Merge pull request #97 from GHswitt/PR_Basen_Talk_Pin
...
Add Basen controller version with talk/flow control pin
2025-10-06 20:46:59 +02:00
Sleeper85
91d421af8d
Create board_ESP32_iBMS_CAN_RS485_V3.3.yaml
2025-10-06 20:26:46 +02:00
Sleeper85
b72f2aa40e
Update board_ESP32-S3_WS-ETH.yaml
2025-10-06 20:26:31 +02:00
Sleeper85
740f226954
Set MCP2515 SPI interface to spi3
2025-09-12 16:03:41 +02:00
Sleeper85
a94209f5cb
Create board_ESP32-S3_WS-ETH.yaml
2025-09-12 16:02:24 +02:00
Sleeper85
2e6bd3dddc
Update board_ESP32-S3_WS-RS485-CAN.yaml
2025-09-09 22:18:56 +02:00
Sleeper85
4e196395e1
Create board_ESP32-S3_WS-RS485-CAN.yaml
2025-09-09 17:12:01 +02:00
Sleeper85
b92bdfbb2a
Added WS to the board name
2025-09-09 16:56:50 +02:00
Andrew Rankin
d01de31f7a
Adding EG4 LLV2 BMS ( #85 )
2025-09-09 16:10:35 +02:00
Sleeper85
7aefccb33b
ETH01-EVO - Comment version: latest
2025-09-04 23:16:05 +02:00
Sleeper85
324491e48d
JK BLE V14 - Fixed missing ${bms_name}
2025-08-21 10:49:34 +02:00
Sleeper85
356bebbf33
Fixed double import bms_balancer.yaml
2025-08-15 15:17:28 +02:00
Sleeper85
ffcc78f711
Fixed BMS balance trigger voltage number
2025-08-14 19:55:04 +02:00
Sleeper85
65a2729073
Merge pull request #76 from GHswitt
...
Add Auto EOC function
2025-08-14 18:53:02 +02:00
Sleeper85
28de17c39d
Delete balancer_sensors_JK_BLE.yaml
2025-08-14 16:59:03 +02:00
Sleeper85
9c8892b069
Added PACE BMS support
2025-08-14 16:07:52 +02:00
Sebastian
308fab7b6e
Update Github addresses for BASEN and DEYE
2025-08-14 15:31:20 +02:00