31 Commits
Author SHA1 Message Date
Sleeper85 5da5cce67c YamBMS 1.5.7 updated changelog 2025-07-13 23:35:43 +02:00
Sleeper85 17b7500f0c YamBMS 1.5.7 updated changelog 2025-07-11 14:33:48 +02:00
Sleeper85 b9632e0eb5 Dashboards 1.5.7 - Replaced % with percent in entity names 2025-07-11 14:33:01 +02:00
Sleeper85 53d8a189b2 Replaced % with percent in entity names. 2025-07-11 14:31:24 +02:00
Sleeper85 53e754c753 FAKE Shunt 1.1.3 2025-07-11 14:28:15 +02:00
Sleeper85 5ba0a5cf26 Dashboards 1.5.7 - Max/Min cell voltage in color using macro 2025-07-10 14:46:07 +02:00
Sleeper85 34fda6c92a YamBMS 1.5.7 - Removed special characters in entity name 2025-07-10 13:13:02 +02:00
Sleeper85 5ffffb74b6 Merge pull request #71
Considerably shortens the file by 3x16 repetitions of same code to 3x2 repeats of same macro definition. If only there was a central key/tag to store macros in yaml, we only need to store the macro one time instead of six!

Things tested working on my end:
- configurable high and low cell voltage colours
- adjustable voltage spacing number
2025-07-10 10:15:45 +02:00
Shivam Maurya ef90c2de0d Update YamBMS_HA_Dashboards
DO NOT merge before Copy paste and testing the YAML works in HA dashboard editor.

Considerably shortens the file by 3x16 repetitions of same code to 3x2 repeats of same macro definition.
If only there was a central key/tag to store macros in yaml, we only need to store the macro one time instead of six!
2025-07-09 23:32:49 +05:30
Sleeper85 cdc86cc298 Added max requested charge/discharge current substitutions 2025-07-09 16:53:23 +02:00
Sleeper85 c18b9c8d55 YamBMS 1.5.7 - Added yambms_version substitution 2025-07-09 16:26:38 +02:00
Sleeper85 62b5844ec2 Delete yambms_custom.yaml 2025-07-09 16:25:04 +02:00
Sleeper85 4c6dba8add Dashboards 1.5.7 - Max/Min cell voltage in color with HA 2025.7 compatibility 2025-07-08 16:58:32 +02:00
Sleeper85 da0acaa3c5 Merge PR#70
Dashboards 1.5.7 - With rounded values and max/min cell voltage in color compatible HA `2025.7`
2025-07-08 14:10:32 +02:00
Sleeper85 2fa5b4d4f3 Dashboards 1.5.7 - With max/min cell voltage in color compatible HA 2025.7 2025-07-08 14:07:33 +02:00
Sleeper85 b143d9bd60 Dashboards 1.5.7 compatible HA core 2025.7 2025-07-08 13:37:57 +02:00
Shivam Maurya 1bacb100d1 Update YamBMS_HA_Dashboard_JK_UART-GPS_BLE_3xBMS.yaml
Copy paste and test  the YAML in HA dashboard editor before merging.

Add , rounded=True
and optimized cell voltage display formatting to ensure high/low cell indication works with newest HA 2025.7.1.
2025-07-08 13:15:53 +05:30
Sleeper85 d0e42a27a4 Create bms_options_auto_balance_switch.yaml 2025-07-07 20:53:18 +02:00
Sleeper85 965ad74127 Added JK balance switch ID 2025-07-07 20:28:06 +02:00
Sleeper85 85e3c90043 FAKE BMS charging and discharging power 2025-06-28 12:34:57 +02:00
Sleeper85 32b2dfc450 Merge branch 'main' of https://github.com/Sleeper85/esphome-yambms 2025-06-26 14:28:08 +02:00
Sleeper85 348f7f2e0c YamBMS 1.5.7 - Improved comments regarding entity id and display name 2025-06-26 14:28:03 +02:00
Sleeper85 a6e4f24df5 Update YamBMS_functions.md 2025-06-23 13:11:09 +02:00
Sleeper85 02dec09cfd Update YamBMS 1.5.7 changelog 2025-06-22 18:01:42 +02:00
Sleeper85 750cfd11a5 YamBMS 1.5.7 - Fixed: change Charge Status to Bulk when Force Charge is requested 2025-06-22 16:54:44 +02:00
Sleeper85 b5c05bf350 Update YamBMS 1.5.7 changelog 2025-06-22 14:32:32 +02:00
Sleeper85 b3333e4949 Defining state_class for all YamBMS sensors 2025-06-22 14:05:26 +02:00
Sleeper85 c00aa954f5 esphome min_version changed to 2025.6.0 2025-06-22 14:04:16 +02:00
Sleeper85 a0cfea8b5d YamBMS 1.5.7 2025-06-19 22:12:34 +02:00
Sleeper85 345181c185 YamBMS 1.5.7 - Auto Float function 2025-06-19 22:11:27 +02:00
Sleeper85 7c97912913 Dashboards 1.5.7 2025-06-19 22:08:45 +02:00
44 changed files with 1938 additions and 3110 deletions

No files matched your search

@@ -1,5 +1,5 @@
# Updated : 2025.06.12
# Version : 1.5.6
# Updated : 2025.07.08
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -245,6 +245,17 @@ views:
- entity: switch.yambms_demo_yambms_1_automatic_discharge_current
name: Automatic Discharge Current
title: YamBMS - Auto CCL / DCL
- type: entities
entities:
- entity: select.yambms_yambms_1_automatic_float_voltage
name: Automatic Float Voltage
- entity: sensor.yambms_yambms_1_auto_float_voltage
name: Auto Float Voltage
- entity: number.yambms_yambms_1_auto_float_update_interval
name: Update Interval
- entity: number.yambms_yambms_1_auto_float_voltage_step
name: Voltage Step
title: YamBMS - Auto Float
- type: entities
entities:
- entity: number.yambms_demo_yambms_1_rebulk_soc
@@ -256,9 +267,9 @@ views:
title: YamBMS - ReBulk
- type: entities
entities:
- entity: number.yambms_demo_yambms_1_max_charge_current
- entity: number.yambms_demo_yambms_1_max_charge_current_percent
name: Max charge current (%)
- entity: number.yambms_demo_yambms_1_max_discharge_current
- entity: number.yambms_demo_yambms_1_max_discharge_current_percent
name: Max discharge current (%)
title: YamBMS - Max current (%)
- type: entities
@@ -305,20 +316,29 @@ views:
- entity: sensor.yambms_demo_canbus_1_inverter_heartbeat
name: CANBUS 1 Inverter Heartbeat
title: YamBMS - Inverter Heartbeat
- type: entities
- type: entity-filter
entities:
- entity: sensor.yambms_demo_debug_heap_free
- entity: sensor.yambms_debug_free_psram_percent
name: Debug Free PSRAM (%)
- entity: sensor.yambms_debug_free_psram
name: Debug Free PSRAM
- entity: sensor.yambms_debug_heap_free_percent
name: Debug Heap free (%)
- entity: sensor.yambms_demo_debug_heap_free_2
- entity: sensor.yambms_debug_heap_free
name: Debug Heap free
- entity: sensor.yambms_demo_debug_heap_max_block
- entity: sensor.yambms_debug_heap_max_block_percent
name: Debug Heap max block (%)
- entity: sensor.yambms_demo_debug_heap_max_block_2
- entity: sensor.yambms_debug_heap_max_block
name: Debug Heap max block
- entity: sensor.yambms_demo_debug_loop_time
- entity: sensor.yambms_debug_loop_time
name: Debug Loop time
- entity: sensor.yambms_demo_debug_reset_reason
- entity: sensor.yambms_esp32_esphome_version
name: ESPHome version
- entity: sensor.yambms_debug_reset_reason
name: Debug Reset reason
conditions:
- condition: state
state_not: unavailable
title: YamBMS - DEBUG
- title: BMS
type: sections
@@ -355,43 +375,43 @@ views:
- type: markdown
content: >-
<center>Charge : <b>{% if
states('switch.yambms_demo_bms_1_charge_switch') == 'on'
states('switch.yambms_demo_bms_1_charge_switch', rounded=True) == 'on'
%} <font color=#41CD52>{{
states('switch.yambms_demo_bms_1_charge_switch') | upper
states('switch.yambms_demo_bms_1_charge_switch', rounded=True) | upper
}}</font> {% else %} <font color=#3090C7>{{
states('switch.yambms_demo_bms_1_charge_switch') | upper
states('switch.yambms_demo_bms_1_charge_switch', rounded=True) | upper
}}</font> {% endif %}
- type: markdown
content: >-
<center>Discharge : <b> {% if
states('switch.yambms_demo_bms_1_discharge_switch') ==
states('switch.yambms_demo_bms_1_discharge_switch', rounded=True) ==
'on' %} <font color=#41CD52>{{
states('switch.yambms_demo_bms_1_discharge_switch') |
states('switch.yambms_demo_bms_1_discharge_switch', rounded=True) |
upper }}</font> {% else %} <font color=#3090C7>{{
states('switch.yambms_demo_bms_1_discharge_switch') |
states('switch.yambms_demo_bms_1_discharge_switch', rounded=True) |
upper }}</font> {% endif %}
- type: markdown
content: >-
<center>Balance : <b> {% if
states('switch.yambms_demo_bms_1_balance_switch') ==
states('switch.yambms_demo_bms_1_balance_switch', rounded=True) ==
'on' %} <font color=#41CD52>{{
states('switch.yambms_demo_bms_1_balance_switch') |
states('switch.yambms_demo_bms_1_balance_switch', rounded=True) |
upper }}</font> {% else %} <font color=#3090C7>{{
states('switch.yambms_demo_bms_1_balance_switch') |
states('switch.yambms_demo_bms_1_balance_switch', rounded=True) |
upper }}</font> {% endif %}
- type: markdown
content: >-
<center><b><font color=#41CD52 size=4>{{
states('sensor.yambms_demo_bms_1_total_voltage') }}
states('sensor.yambms_demo_bms_1_total_voltage', rounded=True) }}
V</font></b>
- type: markdown
content: >-
<center><b><font color=#41CD52 size=4>{{
states('sensor.yambms_demo_bms_1_current') }} A</font></b>
states('sensor.yambms_demo_bms_1_current', rounded=True) }} A</font></b>
- type: markdown
content: >-
<center><b><font color=#41CD52 size=4>{{
states('sensor.yambms_demo_bms_1_power') }} W</font>
states('sensor.yambms_demo_bms_1_power', rounded=True) }} W</font>
- type: grid
square: false
columns: 2
@@ -399,32 +419,32 @@ views:
- type: markdown
content: >-
<center><b><font size=4>SoC :&nbsp;&nbsp;<font color=#41CD52
size=4>{{ states('sensor.yambms_demo_bms_1_battery_soc')
size=4>{{ states('sensor.yambms_demo_bms_1_battery_soc', rounded=True)
}} %</font></font>
- type: markdown
content: >-
<center><b><font size=4>SoH :&nbsp;&nbsp;<font color=#41CD52
size=4>{{ states('sensor.yambms_demo_bms_1_battery_soh')
size=4>{{ states('sensor.yambms_demo_bms_1_battery_soh', rounded=True)
}} %</font></font>
- type: markdown
content: >-
<center> Battery Capacity :&nbsp;&nbsp;<font color=#41CD52>{{
states('sensor.yambms_demo_bms_1_battery_capacity') }} Ah</font><br>
states('sensor.yambms_demo_bms_1_battery_capacity', rounded=True) }} Ah</font><br>
Cycle Capacity :&nbsp;&nbsp;<font color=#41CD52>12532 Ah</font><br>
Ave. Cell Vol. :&nbsp;&nbsp;<font color=#41CD52>3.329 V</font><br>
Balance Cur. :&nbsp;&nbsp;<font color=#41CD52>0.00 A</font><br>
Max temp. :&nbsp;&nbsp;<font color=#41CD52>{{
states('sensor.yambms_demo_bms_1_max_temperature') }} °C</font>
states('sensor.yambms_demo_bms_1_max_temperature', rounded=True) }} °C</font>
- type: markdown
content: >-
<center> Remain Capacity :&nbsp;&nbsp;<font color=#41CD52>{{
states('sensor.yambms_demo_bms_1_capacity_remaining') }} Ah</font><br>
states('sensor.yambms_demo_bms_1_capacity_remaining', rounded=True) }} Ah</font><br>
Cycle Count :&nbsp;&nbsp;<font color=#41CD52>
{{ states('sensor.yambms_demo_bms_1_charging_cycles') }}</font><br>
{{ states('sensor.yambms_demo_bms_1_charging_cycles', rounded=True) }}</font><br>
Delta Cell Vol. :&nbsp;&nbsp;<font color=#41CD52>0.007 V</font><br>
MOS temp. :&nbsp;&nbsp;<font color=#41CD52>25.6 °C</font><br>
Min temp. :&nbsp;&nbsp;<font color=#41CD52>{{
states('sensor.yambms_demo_bms_1_min_temperature') }} °C</font>
states('sensor.yambms_demo_bms_1_min_temperature', rounded=True) }} °C</font>
- type: grid
square: false
columns: 2
@@ -512,43 +532,43 @@ views:
- type: markdown
content: >-
<center>Charge : <b>{% if
states('switch.yambms_demo_bms_2_charge_switch') == 'on'
states('switch.yambms_demo_bms_2_charge_switch', rounded=True) == 'on'
%} <font color=#41CD52>{{
states('switch.yambms_demo_bms_2_charge_switch') | upper
states('switch.yambms_demo_bms_2_charge_switch', rounded=True) | upper
}}</font> {% else %} <font color=#3090C7>{{
states('switch.yambms_demo_bms_2_charge_switch') | upper
states('switch.yambms_demo_bms_2_charge_switch', rounded=True) | upper
}}</font> {% endif %}
- type: markdown
content: >-
<center>Discharge : <b> {% if
states('switch.yambms_demo_bms_2_discharge_switch') ==
states('switch.yambms_demo_bms_2_discharge_switch', rounded=True) ==
'on' %} <font color=#41CD52>{{
states('switch.yambms_demo_bms_2_discharge_switch') |
states('switch.yambms_demo_bms_2_discharge_switch', rounded=True) |
upper }}</font> {% else %} <font color=#3090C7>{{
states('switch.yambms_demo_bms_2_discharge_switch') |
states('switch.yambms_demo_bms_2_discharge_switch', rounded=True) |
upper }}</font> {% endif %}
- type: markdown
content: >-
<center>Balance : <b> {% if
states('switch.yambms_demo_bms_2_balance_switch') ==
states('switch.yambms_demo_bms_2_balance_switch', rounded=True) ==
'on' %} <font color=#41CD52>{{
states('switch.yambms_demo_bms_2_balance_switch') |
states('switch.yambms_demo_bms_2_balance_switch', rounded=True) |
upper }}</font> {% else %} <font color=#3090C7>{{
states('switch.yambms_demo_bms_2_balance_switch') |
states('switch.yambms_demo_bms_2_balance_switch', rounded=True) |
upper }}</font> {% endif %}
- type: markdown
content: >-
<center><b><font color=#41CD52 size=4>{{
states('sensor.yambms_demo_bms_2_total_voltage') }}
states('sensor.yambms_demo_bms_2_total_voltage', rounded=True) }}
V</font></b>
- type: markdown
content: >-
<center><b><font color=#41CD52 size=4>{{
states('sensor.yambms_demo_bms_2_current') }} A</font></b>
states('sensor.yambms_demo_bms_2_current', rounded=True) }} A</font></b>
- type: markdown
content: >-
<center><b><font color=#41CD52 size=4>{{
states('sensor.yambms_demo_bms_2_power') }} W</font>
states('sensor.yambms_demo_bms_2_power', rounded=True) }} W</font>
- type: grid
square: false
columns: 2
@@ -556,32 +576,32 @@ views:
- type: markdown
content: >-
<center><b><font size=4>SoC :&nbsp;&nbsp;<font color=#41CD52
size=4>{{ states('sensor.yambms_demo_bms_2_battery_soc')
size=4>{{ states('sensor.yambms_demo_bms_2_battery_soc', rounded=True)
}} %</font></font>
- type: markdown
content: >-
<center><b><font size=4>SoH :&nbsp;&nbsp;<font color=#41CD52
size=4>{{ states('sensor.yambms_demo_bms_2_battery_soh')
size=4>{{ states('sensor.yambms_demo_bms_2_battery_soh', rounded=True)
}} %</font></font>
- type: markdown
content: >-
<center> Battery Capacity :&nbsp;&nbsp;<font color=#41CD52>{{
states('sensor.yambms_demo_bms_2_battery_capacity') }} Ah</font><br>
states('sensor.yambms_demo_bms_2_battery_capacity', rounded=True) }} Ah</font><br>
Cycle Capacity :&nbsp;&nbsp;<font color=#41CD52>12532 Ah</font><br>
Ave. Cell Vol. :&nbsp;&nbsp;<font color=#41CD52>3.329 V</font><br>
Balance Cur. :&nbsp;&nbsp;<font color=#41CD52>0.00 A</font><br>
Max temp. :&nbsp;&nbsp;<font color=#41CD52>{{
states('sensor.yambms_demo_bms_2_max_temperature') }} °C</font>
states('sensor.yambms_demo_bms_2_max_temperature', rounded=True) }} °C</font>
- type: markdown
content: >-
<center> Remain Capacity :&nbsp;&nbsp;<font color=#41CD52>{{
states('sensor.yambms_demo_bms_2_capacity_remaining') }} Ah</font><br>
states('sensor.yambms_demo_bms_2_capacity_remaining', rounded=True) }} Ah</font><br>
Cycle Count :&nbsp;&nbsp;<font color=#41CD52>
{{ states('sensor.yambms_demo_bms_2_charging_cycles') }}</font><br>
{{ states('sensor.yambms_demo_bms_2_charging_cycles', rounded=True) }}</font><br>
Delta Cell Vol. :&nbsp;&nbsp;<font color=#41CD52>0.007 V</font><br>
MOS temp. :&nbsp;&nbsp;<font color=#41CD52>25.6 °C</font><br>
Min temp. :&nbsp;&nbsp;<font color=#41CD52>{{
states('sensor.yambms_demo_bms_2_min_temperature') }} °C</font>
states('sensor.yambms_demo_bms_2_min_temperature', rounded=True) }} °C</font>
- type: grid
square: false
columns: 2
@@ -669,43 +689,43 @@ views:
- type: markdown
content: >-
<center>Charge : <b>{% if
states('switch.yambms_demo_bms_3_charge_switch') == 'on'
states('switch.yambms_demo_bms_3_charge_switch', rounded=True) == 'on'
%} <font color=#41CD52>{{
states('switch.yambms_demo_bms_3_charge_switch') | upper
states('switch.yambms_demo_bms_3_charge_switch', rounded=True) | upper
}}</font> {% else %} <font color=#3090C7>{{
states('switch.yambms_demo_bms_3_charge_switch') | upper
states('switch.yambms_demo_bms_3_charge_switch', rounded=True) | upper
}}</font> {% endif %}
- type: markdown
content: >-
<center>Discharge : <b> {% if
states('switch.yambms_demo_bms_3_discharge_switch') ==
states('switch.yambms_demo_bms_3_discharge_switch', rounded=True) ==
'on' %} <font color=#41CD52>{{
states('switch.yambms_demo_bms_3_discharge_switch') |
states('switch.yambms_demo_bms_3_discharge_switch', rounded=True) |
upper }}</font> {% else %} <font color=#3090C7>{{
states('switch.yambms_demo_bms_3_discharge_switch') |
states('switch.yambms_demo_bms_3_discharge_switch', rounded=True) |
upper }}</font> {% endif %}
- type: markdown
content: >-
<center>Balance : <b> {% if
states('switch.yambms_demo_bms_3_balance_switch') ==
states('switch.yambms_demo_bms_3_balance_switch', rounded=True) ==
'on' %} <font color=#41CD52>{{
states('switch.yambms_demo_bms_3_balance_switch') |
states('switch.yambms_demo_bms_3_balance_switch', rounded=True) |
upper }}</font> {% else %} <font color=#3090C7>{{
states('switch.yambms_demo_bms_3_balance_switch') |
states('switch.yambms_demo_bms_3_balance_switch', rounded=True) |
upper }}</font> {% endif %}
- type: markdown
content: >-
<center><b><font color=#41CD52 size=4>{{
states('sensor.yambms_demo_bms_3_total_voltage') }}
states('sensor.yambms_demo_bms_3_total_voltage', rounded=True) }}
V</font></b>
- type: markdown
content: >-
<center><b><font color=#41CD52 size=4>{{
states('sensor.yambms_demo_bms_3_current') }} A</font></b>
states('sensor.yambms_demo_bms_3_current', rounded=True) }} A</font></b>
- type: markdown
content: >-
<center><b><font color=#41CD52 size=4>{{
states('sensor.yambms_demo_bms_3_power') }} W</font>
states('sensor.yambms_demo_bms_3_power', rounded=True) }} W</font>
- type: grid
square: false
columns: 2
@@ -713,32 +733,32 @@ views:
- type: markdown
content: >-
<center><b><font size=4>SoC :&nbsp;&nbsp;<font color=#41CD52
size=4>{{ states('sensor.yambms_demo_bms_3_battery_soc')
size=4>{{ states('sensor.yambms_demo_bms_3_battery_soc', rounded=True)
}} %</font></font>
- type: markdown
content: >-
<center><b><font size=4>SoH :&nbsp;&nbsp;<font color=#41CD52
size=4>{{ states('sensor.yambms_demo_bms_3_battery_soh')
size=4>{{ states('sensor.yambms_demo_bms_3_battery_soh', rounded=True)
}} %</font></font>
- type: markdown
content: >-
<center> Battery Capacity :&nbsp;&nbsp;<font color=#41CD52>{{
states('sensor.yambms_demo_bms_3_battery_capacity') }} Ah</font><br>
states('sensor.yambms_demo_bms_3_battery_capacity', rounded=True) }} Ah</font><br>
Cycle Capacity :&nbsp;&nbsp;<font color=#41CD52>12532 Ah</font><br>
Ave. Cell Vol. :&nbsp;&nbsp;<font color=#41CD52>3.329 V</font><br>
Balance Cur. :&nbsp;&nbsp;<font color=#41CD52>0.00 A</font><br>
Max temp. :&nbsp;&nbsp;<font color=#41CD52>{{
states('sensor.yambms_demo_bms_3_max_temperature') }} °C</font>
states('sensor.yambms_demo_bms_3_max_temperature', rounded=True) }} °C</font>
- type: markdown
content: >-
<center> Remain Capacity :&nbsp;&nbsp;<font color=#41CD52>{{
states('sensor.yambms_demo_bms_3_capacity_remaining') }} Ah</font><br>
states('sensor.yambms_demo_bms_3_capacity_remaining', rounded=True) }} Ah</font><br>
Cycle Count :&nbsp;&nbsp;<font color=#41CD52>
{{ states('sensor.yambms_demo_bms_3_charging_cycles') }}</font><br>
{{ states('sensor.yambms_demo_bms_3_charging_cycles', rounded=True) }}</font><br>
Delta Cell Vol. :&nbsp;&nbsp;<font color=#41CD52>0.007 V</font><br>
MOS temp. :&nbsp;&nbsp;<font color=#41CD52>25.6 °C</font><br>
Min temp. :&nbsp;&nbsp;<font color=#41CD52>{{
states('sensor.yambms_demo_bms_3_min_temperature') }} °C</font>
states('sensor.yambms_demo_bms_3_min_temperature', rounded=True) }} °C</font>
- type: grid
square: false
columns: 2
@@ -812,7 +832,7 @@ views:
hours_to_show: 8
- graph: line
type: sensor
entity: sensor.yambms_demo_shunt_1_soc
entity: sensor.yambms_demo_shunt_1_state_of_charge
detail: 2
name: SoC
hours_to_show: 8
@@ -850,7 +870,7 @@ views:
name: Shunt 1 Current
- entity: sensor.yambms_demo_shunt_1_power
name: Shunt 1 Power
- entity: sensor.yambms_demo_shunt_1_soc
- entity: sensor.yambms_demo_shunt_1_state_of_charge
name: Shunt 1 SoC
- entity: sensor.yambms_demo_shunt_1_temperature
name: Shunt 1 Temperature
File diff suppressed because it is too large. Load diff
File diff suppressed because it is too large. Load diff
File diff suppressed because it is too large. Load diff
@@ -1,5 +1,5 @@
# Updated : 2025.06.12
# Version : 1.5.6
# Updated : 2025.06.19
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -245,6 +245,17 @@ views:
- entity: switch.yambms_yambms_1_automatic_discharge_current
name: Automatic Discharge Current
title: YamBMS - Auto CCL / DCL
- type: entities
entities:
- entity: select.yambms_yambms_1_automatic_float_voltage
name: Automatic Float Voltage
- entity: sensor.yambms_yambms_1_auto_float_voltage
name: Auto Float Voltage
- entity: number.yambms_yambms_1_auto_float_update_interval
name: Update Interval
- entity: number.yambms_yambms_1_auto_float_voltage_step
name: Voltage Step
title: YamBMS - Auto Float
- type: entities
entities:
- entity: number.yambms_yambms_1_rebulk_soc
@@ -256,9 +267,9 @@ views:
title: YamBMS - ReBulk
- type: entities
entities:
- entity: number.yambms_yambms_1_max_charge_current
- entity: number.yambms_yambms_1_max_charge_current_percent
name: Max charge current (%)
- entity: number.yambms_yambms_1_max_discharge_current
- entity: number.yambms_yambms_1_max_discharge_current_percent
name: Max discharge current (%)
title: YamBMS - Max current (%)
- type: entities
@@ -305,18 +316,27 @@ views:
- entity: sensor.yambms_canbus_1_inverter_heartbeat
name: CANBUS 1 Inverter Heartbeat
title: YamBMS - Inverter Heartbeat
- type: entities
- type: entity-filter
entities:
- entity: sensor.yambms_debug_heap_free
- entity: sensor.yambms_debug_free_psram_percent
name: Debug Free PSRAM (%)
- entity: sensor.yambms_debug_free_psram
name: Debug Free PSRAM
- entity: sensor.yambms_debug_heap_free_percent
name: Debug Heap free (%)
- entity: sensor.yambms_debug_heap_free_2
- entity: sensor.yambms_debug_heap_free
name: Debug Heap free
- entity: sensor.yambms_debug_heap_max_block
- entity: sensor.yambms_debug_heap_max_block_percent
name: Debug Heap max block (%)
- entity: sensor.yambms_debug_heap_max_block_2
- entity: sensor.yambms_debug_heap_max_block
name: Debug Heap max block
- entity: sensor.yambms_debug_loop_time
name: Debug Loop time
- entity: sensor.yambms_esp32_esphome_version
name: ESPHome version
- entity: sensor.yambms_debug_reset_reason
name: Debug Reset reason
conditions:
- condition: state
state_not: unavailable
title: YamBMS - DEBUG
+11 -1
View File
@@ -113,7 +113,7 @@ rx_pin: 22 # to CAN board CRX (with 4.7K resistor except for SN65HVD230)
## Requirements
* [ESPHome 2025.5.0 or higher](https://github.com/esphome/esphome/releases)
* [ESPHome 2025.6.0 or higher](https://github.com/esphome/esphome/releases)
* ESP32 MCU (buying a board with ≥8MB flash is advised if you intend to monitor multiple BMS)
* CAN transceiver (only with TJA1050/TJA1051 => 4.7K resistor for 5V to 3V3 level shifing)
* BMS JK, JBD, Seplos (other BMS brands already integrated with ESPhome can be added easily)
@@ -142,6 +142,16 @@ for statistics collection. Only [@Sleeper85](https://github.com/Sleeper85) have
## Changelog
* YamBMS 1.5.7 :
* Adapted the default `min/max` values ​​for the `Float` slider
* Merged [PR 53](https://github.com/Sleeper85/esphome-yambms/pull/53) Add feature `Auto Float Voltage`
* New dashboard for `Auto Float Voltage` function
* Defining `state_class` for all YamBMS sensors
* Set esphome `min_version` to `2025.6.0`
* Fixed: change `Charge Status` to `Bulk` when `Force Charge` is requested
* Merged [PR 70](https://github.com/Sleeper85/esphome-yambms/pull/70) Dashboards compatible with `HA 2025.7`
* Merged [PR 70](https://github.com/Sleeper85/esphome-yambms/pull/71) Dashboard `max/min` cell voltage in color using macro
* Removed all special characters in entities name + dashboards correction
* YamBMS 1.5.6 :
* Fixed [issue 58](https://github.com/Sleeper85/esphome-yambms/issues/58) Compilation problem with `esphome 2025.5.0`
* Fixed [issue 55](https://github.com/Sleeper85/esphome-yambms/issues/55) New CPU frequency option
+5 -5
View File
@@ -1,5 +1,5 @@
# Updated : 2025.06.17
# Version : 1.5.6
# Updated : 2025.06.26
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -68,9 +68,9 @@ api:
# +--------------------------------------+
substitutions:
# Name
name: '' # Name that can be added as a second prefix after the friendly name, you can leave it blank.
hostname: 'yambms' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS' # Prefix added in front of all entity names and also to classify them.
friendly_name : 'YamBMS' # Prefix added in front of the `entity display name`, also used to classify them.
hostname: 'yambms' # Name of your ESPHome node registered on the IP network (DNS name, must be unique) and prefix added in front of the `entity id`.
name: '' # This name can be added as a second prefix, both for the `entity display name` and the `entity id`, you can leave it blank.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
+5 -5
View File
@@ -1,5 +1,5 @@
# Updated : 2025.06.12
# Version : 1.5.6
# Updated : 2025.06.26
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -68,9 +68,9 @@ api:
# +--------------------------------------+
substitutions:
# Name
name: '' # Name that can be added as a second prefix after the friendly name, you can leave it blank.
hostname: 'yambms' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS Demo' # Prefix added in front of all entity names and also to classify them.
friendly_name : 'YamBMS Demo' # Prefix added in front of the `entity display name`, also used to classify them.
hostname: 'yambms' # Name of your ESPHome node registered on the IP network (DNS name, must be unique) and prefix added in front of the `entity id`.
name: '' # This name can be added as a second prefix, both for the `entity display name` and the `entity id`, you can leave it blank.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
+5 -5
View File
@@ -1,5 +1,5 @@
# Updated : 2025.06.12
# Version : 1.5.6
# Updated : 2025.06.26
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -68,9 +68,9 @@ api:
# +--------------------------------------+
substitutions:
# Name
name: '' # Name that can be added as a second prefix after the friendly name, you can leave it blank.
hostname: 'yambms' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS' # Prefix added in front of all entity names and also to classify them.
friendly_name : 'YamBMS' # Prefix added in front of the `entity display name`, also used to classify them.
hostname: 'yambms' # Name of your ESPHome node registered on the IP network (DNS name, must be unique) and prefix added in front of the `entity id`.
name: '' # This name can be added as a second prefix, both for the `entity display name` and the `entity id`, you can leave it blank.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
+5 -5
View File
@@ -1,5 +1,5 @@
# Updated : 2025.06.16
# Version : 1.5.6
# Updated : 2025.06.26
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -68,9 +68,9 @@ api:
# +--------------------------------------+
substitutions:
# Name
name: '' # Name that can be added as a second prefix after the friendly name, you can leave it blank.
hostname: 'yambms' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS' # Prefix added in front of all entity names and also to classify them.
friendly_name : 'YamBMS' # Prefix added in front of the `entity display name`, also used to classify them.
hostname: 'yambms' # Name of your ESPHome node registered on the IP network (DNS name, must be unique) and prefix added in front of the `entity id`.
name: '' # This name can be added as a second prefix, both for the `entity display name` and the `entity id`, you can leave it blank.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
+5 -5
View File
@@ -1,5 +1,5 @@
# Updated : 2025.06.12
# Version : 1.5.6
# Updated : 2025.06.26
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -68,9 +68,9 @@ api:
# +--------------------------------------+
substitutions:
# Name
name: '' # Name that can be added as a second prefix after the friendly name, you can leave it blank.
hostname: 'yambms' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS' # Prefix added in front of all entity names and also to classify them.
friendly_name : 'YamBMS' # Prefix added in front of the `entity display name`, also used to classify them.
hostname: 'yambms' # Name of your ESPHome node registered on the IP network (DNS name, must be unique) and prefix added in front of the `entity id`.
name: '' # This name can be added as a second prefix, both for the `entity display name` and the `entity id`, you can leave it blank.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
+5 -5
View File
@@ -1,5 +1,5 @@
# Updated : 2025.06.12
# Version : 1.5.6
# Updated : 2025.06.26
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -68,9 +68,9 @@ api:
# +--------------------------------------+
substitutions:
# Name
name: '' # Name that can be added as a second prefix after the friendly name, you can leave it blank.
hostname: 'pvbrain2' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS' # Prefix added in front of all entity names and also to classify them.
friendly_name : 'YamBMS' # Prefix added in front of the `entity display name`, also used to classify them.
hostname: 'pvbrain2' # Name of your ESPHome node registered on the IP network (DNS name, must be unique) and prefix added in front of the `entity id`.
name: '' # This name can be added as a second prefix, both for the `entity display name` and the `entity id`, you can leave it blank.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
+5 -5
View File
@@ -1,5 +1,5 @@
# Updated : 2025.06.19
# Version : 1.5.6
# Updated : 2025.06.26
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -32,9 +32,9 @@ logger:
# +--------------------------------------+
substitutions:
# Name
name: '' # Name that can be added as a second prefix after the friendly name, you can leave it blank.
hostname: 'yambms' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS' # Prefix added in front of all entity names and also to classify them.
friendly_name : 'YamBMS' # Prefix added in front of the `entity display name`, also used to classify them.
hostname: 'yambms' # Name of your ESPHome node registered on the IP network (DNS name, must be unique) and prefix added in front of the `entity id`.
name: '' # This name can be added as a second prefix, both for the `entity display name` and the `entity id`, you can leave it blank.
# +--------------------------------------+
# | Shunt Settings |
# +--------------------------------------+
+6 -6
View File
@@ -1,5 +1,5 @@
# Updated : 2025.06.12
# Version : 1.5.6
# Updated : 2025.06.26
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -67,10 +67,10 @@ api:
# | Global Settings |
# +--------------------------------------+
substitutions:
# ESP32 name / hostname
name: ''
hostname: 'yambms' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS'
# Name
friendly_name : 'YamBMS' # Prefix added in front of the `entity display name`, also used to classify them.
hostname: 'yambms' # Name of your ESPHome node registered on the IP network (DNS name, must be unique) and prefix added in front of the `entity id`.
name: '' # This name can be added as a second prefix, both for the `entity display name` and the `entity id`, you can leave it blank.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
+5 -5
View File
@@ -1,5 +1,5 @@
# Updated : 2025.06.12
# Version : 1.5.6
# Updated : 2025.06.26
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -68,9 +68,9 @@ api:
# +--------------------------------------+
substitutions:
# Name
name: '' # Name that can be added as a second prefix after the friendly name, you can leave it blank.
hostname: 'yambms' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS' # Prefix added in front of all entity names and also to classify them.
friendly_name : 'YamBMS' # Prefix added in front of the `entity display name`, also used to classify them.
hostname: 'yambms' # Name of your ESPHome node registered on the IP network (DNS name, must be unique) and prefix added in front of the `entity id`.
name: '' # This name can be added as a second prefix, both for the `entity display name` and the `entity id`, you can leave it blank.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
+5 -5
View File
@@ -1,5 +1,5 @@
# Updated : 2025.06.17
# Version : 1.5.6
# Updated : 2025.06.26
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -67,9 +67,9 @@ api:
# +--------------------------------------+
substitutions:
# Name
name: '' # Name that can be added as a second prefix after the friendly name, you can leave it blank.
hostname: 'yambms' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS' # Prefix added in front of all entity names and also to classify them.
friendly_name : 'YamBMS' # Prefix added in front of the `entity display name`, also used to classify them.
hostname: 'yambms' # Name of your ESPHome node registered on the IP network (DNS name, must be unique) and prefix added in front of the `entity id`.
name: '' # This name can be added as a second prefix, both for the `entity display name` and the `entity id`, you can leave it blank.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
+5 -5
View File
@@ -1,5 +1,5 @@
# Updated : 2025.06.14
# Version : 1.5.6
# Updated : 2025.06.26
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -67,9 +67,9 @@ api:
# +--------------------------------------+
substitutions:
# Name
name: '' # Name that can be added as a second prefix after the friendly name, you can leave it blank.
hostname: 'yambms' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS Demo' # Prefix added in front of all entity names and also to classify them.
friendly_name : 'YamBMS Demo' # Prefix added in front of the `entity display name`, also used to classify them.
hostname: 'yambms' # Name of your ESPHome node registered on the IP network (DNS name, must be unique) and prefix added in front of the `entity id`.
name: '' # This name can be added as a second prefix, both for the `entity display name` and the `entity id`, you can leave it blank.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
+5 -5
View File
@@ -1,5 +1,5 @@
# Updated : 2025.06.16
# Version : 1.5.6
# Updated : 2025.06.26
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -67,9 +67,9 @@ api:
# +--------------------------------------+
substitutions:
# Name
name: '' # Name that can be added as a second prefix after the friendly name, you can leave it blank.
hostname: 'yambms' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS' # Prefix added in front of all entity names and also to classify them.
friendly_name : 'YamBMS' # Prefix added in front of the `entity display name`, also used to classify them.
hostname: 'yambms' # Name of your ESPHome node registered on the IP network (DNS name, must be unique) and prefix added in front of the `entity id`.
name: '' # This name can be added as a second prefix, both for the `entity display name` and the `entity id`, you can leave it blank.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
+5 -5
View File
@@ -1,5 +1,5 @@
# Updated : 2025.06.14
# Version : 1.5.6
# Updated : 2025.06.26
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -67,9 +67,9 @@ api:
# +--------------------------------------+
substitutions:
# Name
name: '' # Name that can be added as a second prefix after the friendly name, you can leave it blank.
hostname: 'yambms' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS' # Prefix added in front of all entity names and also to classify them.
friendly_name : 'YamBMS' # Prefix added in front of the `entity display name`, also used to classify them.
hostname: 'yambms' # Name of your ESPHome node registered on the IP network (DNS name, must be unique) and prefix added in front of the `entity id`.
name: '' # This name can be added as a second prefix, both for the `entity display name` and the `entity id`, you can leave it blank.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
+286
View File
@@ -0,0 +1,286 @@
# Updated : 2025.06.26
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
######################## YamBMS Remote Packages Version ########################
# You can compile this YAML directly without the `packages` folder.
# The packages will be automatically downloaded from GitHub.
# Don't forget to configure your WiFi credentials in the secrets.yaml
################################################################################
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: INFO # VERBOSE / DEBUG / INFO / WARN
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
# web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | Global Settings |
# +--------------------------------------+
substitutions:
# Name
friendly_name : 'YamBMS' # Prefix added in front of the `entity display name`, also used to classify them.
hostname: 'yambms' # Name of your ESPHome node registered on the IP network (DNS name, must be unique) and prefix added in front of the `entity id`.
name: '' # This name can be added as a second prefix, both for the `entity display name` and the `entity id`, you can leave it blank.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_id: 'yambms1'
yambms_name: 'YamBMS 1'
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# +--------------------------------------+
# | Shunt Settings |
# +--------------------------------------+
shunt_update_interval: '3s' # frequency at which Shunt data is refreshed
shunt_combine_interval: '1s' # frequency at which Shunt data is combined in YamBMS
# +--------------------------------------+
# | BMS Settings |
# +--------------------------------------+
bms_update_interval: '3s' # frequency at which BMS data is refreshed, going below '3s' can cause problems
bms_combine_interval: '1s' # frequency at which BMS data is combined in YamBMS
bms_cutoff_timer: '50s' # time during which the end of charge conditions must be respected (cut-off + cells not equalizing)
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
packages:
################ >>> CONFIG & CUSTOM LP <<< ################
# Local Packages intended for creating custom codes
# or sharing settings between several main.yaml
# yambms_config: !include yambms_config.yaml
# yambms_custom: !include yambms_custom.yaml
############### >>> UNCOMMENT YOUR BOARD <<< ###############
############### >>> ONLY ONE BOARD ! <<< ###############
board:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: 'packages/board/board_ESP32_Generic.yaml'
# - path: 'packages/board/board_ESP32_DevKit-V1.yaml'
# - path: 'packages/board/board_ESP32_Atom-Lite.yaml'
# - path: 'packages/board/board_ESP32_EVB.yaml'
# - path: 'packages/board/board_ESP32_LilyGo-T-CAN485.yaml'
# - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
# - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
# - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
# - path: 'packages/board/board_ESP32-S3_DevKitC-1_LED-38.yaml'
# - path: 'packages/board/board_ESP32-S3_DevKitC-1_LED-48.yaml'
# - path: 'packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml'
# - path: 'packages/board/board_ESP32-S3_Touch-LCD-4.3.yaml'
# - path: 'packages/board/board_ESP32-S3_Touch-LCD-7.yaml'
# - path: 'packages/board/board_ESP32-S3_XIAO.yaml'
# - path: 'packages/board/board_ESP32-S3_YBoard.yaml'
# - path: 'packages/board/board_ESP32-S3_AtomS3.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
# - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
# LilyGo T-Connect Pro
# Importing the display also activates PSRAM.
# Also note that the display update takes about 120 ms, as indicated in the logs:
# "Component display took a long time for an operation (124 ms)."
# Board
# - path: 'packages/board/board_ESP32-S3_LilyGo-T-Connect-Pro.yaml'
# Display
# - path: 'packages/board/board_options_display_480x222.yaml'
# vars:
# display_auto_next_page_interval: '5s'
########### >>> UNCOMMENT YOUR BOARD OPTIONS <<< ###########
board_options:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
# UART 1
- path: 'packages/board/board_options_itf_uart_esp_1.yaml'
# UART 2
- path: 'packages/board/board_options_itf_uart_esp_2.yaml'
# UART 3
# - path: 'packages/board/board_options_itf_uart_esp_3.yaml'
# ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit)
- path: 'packages/board/board_options_itf_canbus_esp32_can.yaml'
vars:
canbus_node_id: 'canbus_inverter_1'
# MCP2515
# - path: 'packages/board/board_options_itf_canbus_mcp2515.yaml'
# vars:
# canbus_node_id: 'canbus_inverter_1'
############################################################
# You don't have to import a shunt but you must import at least one BMS.
# UART Shunt
# shunt:
# url: https://github.com/Sleeper85/esphome-yambms
# ref: main
# refresh: 0s
# files:
# # Shunt 1
# - path: 'packages/shunt/shunt_combine_Victron_SmartShunt_UART.yaml' # shunt_combine_Junctek_KHF_UART.yaml
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_uart_id: 'uart_esp_3'
# BLE Shunt
# shunt:
# url: https://github.com/Sleeper85/esphome-yambms
# ref: main
# refresh: 0s
# files:
# # Shunt 1
# - path: 'packages/shunt/shunt_combine_Victron_SmartShunt_BLE.yaml'
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_mac_address: '60:A4:23:91:8F:55' # Your MAC address
# shunt_encryption_key: '0df4d0395b7d1a876c0c33ecb9e70dcd' # Your encryption key
bms:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
# BMS 1
- path: 'packages/bms/bms_combine_JK_UART_4G-GPS_full.yaml'
vars:
bms_id: '1' # must be a number
bms_name: 'JK-BMS 1'
bms_uart_id: 'uart_esp_1'
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
# BMS 2
- path: 'packages/bms/bms_combine_JK_UART_4G-GPS_full.yaml'
vars:
bms_id: '2' # must be a number
bms_name: 'JK-BMS 2'
bms_uart_id: 'uart_esp_2'
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
yambms:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: 'packages/yambms/yambms.yaml'
canbus:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: 'packages/yambms/yambms_canbus.yaml'
vars:
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_inverter_1'
canbus_light_id: 'esp_light'
# The CANBUS link will be considered down if no response from the inverter (0x305 frame) for 5s
# The Deye inverter sends the ACK 0x305 only when it receives the 0x356 frame.
canbus_link_timer: '5s'
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |
# +--------------------------------------+
debug:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: packages/base/device_debug_ESP32.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'
+5 -5
View File
@@ -1,5 +1,5 @@
# Updated : 2025.06.14
# Version : 1.5.6
# Updated : 2025.06.26
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -67,9 +67,9 @@ api:
# +--------------------------------------+
substitutions:
# Name
name: '' # Name that can be added as a second prefix after the friendly name, you can leave it blank.
hostname: 'yambms' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS' # Prefix added in front of all entity names and also to classify them.
friendly_name : 'YamBMS' # Prefix added in front of the `entity display name`, also used to classify them.
hostname: 'yambms' # Name of your ESPHome node registered on the IP network (DNS name, must be unique) and prefix added in front of the `entity id`.
name: '' # This name can be added as a second prefix, both for the `entity display name` and the `entity id`, you can leave it blank.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
+5 -5
View File
@@ -1,5 +1,5 @@
# Updated : 2025.06.14
# Version : 1.5.6
# Updated : 2025.06.26
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -67,9 +67,9 @@ api:
# +--------------------------------------+
substitutions:
# Name
name: '' # Name that can be added as a second prefix after the friendly name, you can leave it blank.
hostname: 'yambms' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS' # Prefix added in front of all entity names and also to classify them.
friendly_name : 'YamBMS' # Prefix added in front of the `entity display name`, also used to classify them.
hostname: 'yambms' # Name of your ESPHome node registered on the IP network (DNS name, must be unique) and prefix added in front of the `entity id`.
name: '' # This name can be added as a second prefix, both for the `entity display name` and the `entity id`, you can leave it blank.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
+5 -5
View File
@@ -1,5 +1,5 @@
# Updated : 2025.06.12
# Version : 1.5.6
# Updated : 2025.06.26
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -67,9 +67,9 @@ api:
# +--------------------------------------+
substitutions:
# Name
name: '' # Name that can be added as a second prefix after the friendly name, you can leave it blank.
hostname: 'pvbrain2' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS' # Prefix added in front of all entity names and also to classify them.
friendly_name : 'YamBMS' # Prefix added in front of the `entity display name`, also used to classify them.
hostname: 'pvbrain2' # Name of your ESPHome node registered on the IP network (DNS name, must be unique) and prefix added in front of the `entity id`.
name: '' # This name can be added as a second prefix, both for the `entity display name` and the `entity id`, you can leave it blank.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
+5 -5
View File
@@ -1,5 +1,5 @@
# Updated : 2025.06.16
# Version : 1.5.6
# Updated : 2025.06.26
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -67,9 +67,9 @@ api:
# +--------------------------------------+
substitutions:
# Name
name: '' # Name that can be added as a second prefix after the friendly name, you can leave it blank.
hostname: 'yambms' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS' # Prefix added in front of all entity names and also to classify them.
friendly_name : 'YamBMS' # Prefix added in front of the `entity display name`, also used to classify them.
hostname: 'yambms' # Name of your ESPHome node registered on the IP network (DNS name, must be unique) and prefix added in front of the `entity id`.
name: '' # This name can be added as a second prefix, both for the `entity display name` and the `entity id`, you can leave it blank.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
+5 -5
View File
@@ -1,5 +1,5 @@
# Updated : 2025.06.14
# Version : 1.5.6
# Updated : 2025.06.26
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -67,9 +67,9 @@ api:
# +--------------------------------------+
substitutions:
# Name
name: '' # Name that can be added as a second prefix after the friendly name, you can leave it blank.
hostname: 'yambms' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS' # Prefix added in front of all entity names and also to classify them.
friendly_name : 'YamBMS' # Prefix added in front of the `entity display name`, also used to classify them.
hostname: 'yambms' # Name of your ESPHome node registered on the IP network (DNS name, must be unique) and prefix added in front of the `entity id`.
name: '' # This name can be added as a second prefix, both for the `entity display name` and the `entity id`, you can leave it blank.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
+15 -1
View File
@@ -21,7 +21,7 @@ Other configurations are possible, don't hesitate to communicate what works well
| Inverter | Battery mode | CAN protocol |
| --- | --- | --- |
| Deye | Lithium 00 | PYLON 1.2 |
| GoodWe | LX U5.4-L | PYLON + |
| GoodWe | LX U5.4-L | PYLON V2 |
| Sofar | Automatic | PYLON 1.2 |
| Growatt | CAN L52 | PYLON 1.2 |
| Solis | AoBo | SMA |
@@ -115,6 +115,20 @@ You can compare `Auto CCL` to a max speed limiter in a car.
Current control should work with any inverter that uses `CAN` control.
## Auto Float Voltage
When switching from `Bulk` to `Float`, therefore lowering the `Requested Charge Voltage (CVL)`, some inverters (e.g. Deye SUN-12K) will start to discharge the battery (into the grid) with up to max. discharge current until the
`Requested Charge Voltage (CVL)` is reached. The reason behind this is that the inverter sees this as battery overvoltage and wants to counter it.
As workaround, by enabling `Automatic Float Voltage`, it will lower the `Requested Charge Voltage (CVL)` gradually in small steps until the float voltage is reached, allowing the battery more time to settle down.
There are two modes available: `Follow` and `Immediately`.
- `Follow`: Waits until the battery voltage itself is below the current `Requested Charge Voltage (CVL)` before lowering `Requested Charge Voltage (CVL)` further. It follows the battery voltage until the target float voltage is reached.
- `Immediately`: Immediately start lowering the `Requested Charge Voltage (CVL)`, independent of the current battery voltage. That means it can go below the current battery voltage.
This feature might not work with all inverters as good or is not required if these do not discharge the battery.
The voltage steps can be configured (default `0.1V`) with `Auto Float Voltage Step`. The update interval can be configured (default `3 minutes`) with `Auto Float Update Interval`.
## Requested Values
![Image](../../images/YamBMS_Requested_Values.png "YamBMS_Requested_Values")
+4 -4
View File
@@ -1,5 +1,5 @@
# Updated : 2025.06.12
# Version : 1.5.6
# Updated : 2025.06.19
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -18,7 +18,7 @@
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
substitutions:
yambms_version: "1.5.6"
yambms_version: "1.5.7"
esphome:
name: ${hostname}
@@ -28,4 +28,4 @@ esphome:
project:
name: Sleeper85.YamBMS
version: ${yambms_version}
min_version: 2025.5.0
min_version: 2025.6.0
+4 -4
View File
@@ -1,5 +1,5 @@
# Updated : 2024.08.28
# Version : 1.1.3
# Updated : 2025.07.11
# Version : 1.1.4
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -42,7 +42,7 @@ sensor:
id: esp32_loop_time
- platform: template
name: ${name} ${debug_name} Heap free (%)
name: ${name} ${debug_name} Heap free percent
id: esp32_heap_free_percent
unit_of_measurement: '%'
accuracy_decimals: 2
@@ -54,7 +54,7 @@ sensor:
lambda: return ( id(esp32_heap_free).state * 100 / 327680 );
- platform: template
name: ${name} ${debug_name} Heap max block (%)
name: ${name} ${debug_name} Heap max block percent
id: esp32_heap_max_block_percent
unit_of_measurement: '%'
accuracy_decimals: 2
@@ -1,5 +1,5 @@
# Updated : 2024.08.28
# Version : 1.1.3
# Updated : 2025.07.11
# Version : 1.1.4
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -45,7 +45,7 @@ sensor:
id: esp32_loop_time
- platform: template
name: ${name} ${debug_name} Heap free (%)
name: ${name} ${debug_name} Heap free percent
id: esp32_heap_free_percent
unit_of_measurement: '%'
accuracy_decimals: 2
@@ -57,7 +57,7 @@ sensor:
lambda: return ( id(esp32_heap_free).state * 100 / 327680 );
- platform: template
name: ${name} ${debug_name} Heap max block (%)
name: ${name} ${debug_name} Heap max block percent
id: esp32_heap_max_block_percent
unit_of_measurement: '%'
accuracy_decimals: 2
@@ -69,7 +69,7 @@ sensor:
lambda: return ( id(esp32_heap_max_block).state * 100 / 327680 );
- platform: template
name: ${name} ${debug_name} Free PSRAM (%)
name: ${name} ${debug_name} Free PSRAM percent
id: esp32_free_psram_percent
unit_of_measurement: '%'
accuracy_decimals: 2
+2 -2
View File
@@ -1,5 +1,5 @@
# Updated : 2025.06.10
# Version : 1.5.6
# Updated : 2025.06.19
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# This YAML is free software: you can redistribute it and/or
@@ -1,5 +1,5 @@
# Updated : 2025.06.11
# Version : 1.2.8
# Updated : 2025.07.07
# Version : 1.2.9
# GitHub : https://github.com/syssi/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -101,6 +101,7 @@ switch:
id: bms${bms_id}_discharge_switch
name: "${name} ${bms_name} Discharge switch"
balancer:
id: bms${bms_id}_balance_switch
name: "${name} ${bms_name} Balance switch"
# Commits 2024.01.20 : Add new switch entities of firmware version 14 (from V11)
heating:
+3 -2
View File
@@ -1,5 +1,5 @@
# Updated : 2025.06.11
# Version : 1.2.8
# Updated : 2025.07.07
# Version : 1.2.9
# GitHub : https://github.com/syssi/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -98,6 +98,7 @@ switch:
id: bms${bms_id}_discharge_switch
name: "${name} ${bms_name} Discharge switch"
balancer:
id: bms${bms_id}_balance_switch
name: "${name} ${bms_name} Balance switch"
# +--------------------------------------+
- platform: ble_client
+3 -2
View File
@@ -1,5 +1,5 @@
# Updated : 2025.06.11
# Version : 1.2.8
# Updated : 2025.07.07
# Version : 1.2.9
# GitHub : https://github.com/syssi/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -98,6 +98,7 @@ switch:
id: bms${bms_id}_discharge_switch
name: "${name} ${bms_name} Discharge switch"
balancer:
id: bms${bms_id}_balance_switch
name: "${name} ${bms_name} Balance switch"
# +--------------------------------------+
- platform: ble_client
@@ -1,5 +1,5 @@
# Updated : 2025.06.11
# Version : 1.2.6
# Updated : 2025.07.07
# Version : 1.2.7
# GitHub : https://github.com/txubelaxu/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -49,6 +49,7 @@ switch:
id: bms${bms_id}_discharge_switch
name: "${name} ${bms_name} discharging"
balancing:
id: bms${bms_id}_balance_switch
name: "${name} ${bms_name} balancing"
emergency:
name: "${name} ${bms_name} emergency"
@@ -1,4 +1,4 @@
# Updated : 2025.03.12
# Updated : 2025.07.07
# Version : 1.1.1
# GitHub : https://github.com/Sleeper85/esphome-yambms
@@ -17,17 +17,12 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
switch:
- platform: template
name: "${name} ${yambms_name} Force Float"
id: ${yambms_id}_switch_force_float
restore_mode: RESTORE_DEFAULT_OFF
optimistic: true
entity_category: config
interval:
- interval: ${yambms_update_interval}
- interval: ${bms_update_interval}
then:
- lambda: |-
// Force Float => Float
if (id(${yambms_id}_switch_force_float).state) id(${yambms_id}_charge_status) = "Float";
if (id(bms${bms_id}_max_cell_voltage).state > ${bms_top_v})
id(bms${bms_id}_balance_switch).turn_on();
else if (id(bms${bms_id}_min_cell_voltage).state < ${bms_bot_v})
id(bms${bms_id}_balance_switch).turn_on();
else id(bms${bms_id}_balance_switch).turn_off();
+26 -2
View File
@@ -1,5 +1,5 @@
# Updated : 2025.06.12
# Version : 1.1.5
# Updated : 2025.06.28
# Version : 1.1.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -312,6 +312,30 @@ sensor:
- delta: 1
lambda: return ${bms_charging_cycles};
# Charging power: Calculated from voltage and current
- platform: template
name: "${name} ${bms_name} battery power charging"
id: bms${bms_id}_charging_power
unit_of_measurement: 'W'
device_class: 'current'
state_class: 'measurement'
accuracy_decimals: 0
lambda: |-
if (id(bms${bms_id}_current).state > 0) return id(bms${bms_id}_total_voltage).state * id(bms${bms_id}_current).state;
else return 0;
# Discharging power: Calculated from voltage and current
- platform: template
name: "${name} ${bms_name} battery power discharging"
id: bms${bms_id}_discharging_power
unit_of_measurement: 'W'
device_class: 'current'
state_class: 'measurement'
accuracy_decimals: 0
lambda: |-
if (id(bms${bms_id}_current).state < 0) return id(bms${bms_id}_total_voltage).state * -id(bms${bms_id}_current).state;
else return 0;
number:
# errors_bitmask (16bits)
- platform: template
@@ -1,5 +1,5 @@
# Updated : 2025.06.11
# Version : 1.2.8
# Updated : 2025.07.07
# Version : 1.2.9
# GitHub : https://github.com/syssi/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -93,6 +93,7 @@ switch:
id: bms${bms_id}_discharge_switch
name: "${name} ${bms_name} Discharge switch"
balancer:
id: bms${bms_id}_balance_switch
name: "${name} ${bms_name} Balance switch"
# +--------------------------------------+
- platform: ble_client
@@ -1,5 +1,5 @@
# Updated : 2025.06.11
# Version : 1.1.2
# Updated : 2025.07.07
# Version : 1.1.3
# GitHub : https://github.com/txubelaxu/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -46,6 +46,7 @@ switch:
id: bms${bms_id}_discharge_switch
name: "${name} ${bms_name} discharging"
balancing:
id: bms${bms_id}_balance_switch
name: "${name} ${bms_name} balancing"
emergency:
name: "${name} ${bms_name} emergency"
@@ -1,5 +1,5 @@
# Updated : 2025.06.11
# Version : 1.2.7
# Updated : 2025.07.07
# Version : 1.2.8
# GitHub : https://github.com/txubelaxu/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -48,6 +48,7 @@ switch:
id: bms${bms_id}_discharge_switch
name: "${name} ${bms_name} discharging"
balancing:
id: bms${bms_id}_balance_switch
name: "${name} ${bms_name} balancing"
emergency:
name: "${name} ${bms_name} emergency"
@@ -1,5 +1,5 @@
# Updated : 2025.06.11
# Version : 1.2.7
# Updated : 2025.07.07
# Version : 1.2.8
# GitHub : https://github.com/txubelaxu/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -48,6 +48,7 @@ switch:
id: bms${bms_id}_discharge_switch
name: "${name} ${bms_name} discharging"
balancing:
id: bms${bms_id}_balance_switch
name: "${name} ${bms_name} balancing"
emergency:
name: "${name} ${bms_name} emergency"
+3 -3
View File
@@ -1,5 +1,5 @@
# Updated : 2024.11.11
# Version : 1.1.2
# Updated : 2025.10.11
# Version : 1.1.3
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -79,7 +79,7 @@ sensor:
# state_of_charge
- platform: template
id: shunt${shunt_id}_soc
name: "${name} ${shunt_name} SoC"
name: "${name} ${shunt_name} State of Charge"
update_interval: ${shunt_update_interval}
accuracy_decimals: 0
unit_of_measurement: '%'
+33 -13
View File
@@ -1,5 +1,5 @@
# Updated : 2025.06.16
# Version : 1.5.6
# Updated : 2025.07.11
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -17,6 +17,15 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
substitutions:
yambms_version: "1.5.7"
# Max. charge current : corresponds to the maximum charge current which may be requested by YamBMS.
# The current requested will be proportional to the BMS count without ever exceeding this value.
yambms_max_requested_charge_current: '300' # in Ampere
# Max. discharge current : corresponds to the maximum discharge current which may be requested by YamBMS.
# The current requested will be proportional to the BMS count without ever exceeding this value.
yambms_max_requested_discharge_current: '300' # in Ampere
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
@@ -28,6 +37,7 @@ packages:
yambms_auto_cvl: !include yambms_auto_cvl.yaml
yambms_auto_ccl: !include yambms_auto_ccl.yaml
yambms_auto_dcl: !include yambms_auto_dcl.yaml
yambms_auto_float: !include yambms_auto_float.yaml
# Execute once
esphome:
@@ -41,7 +51,7 @@ esphome:
{
// LFP
id(${yambms_id}_cell_nominal_v) = 3.20;
id(${yambms_id}_cell_min_charge_v) = 3.37; // Fully charged at rest
id(${yambms_id}_cell_min_charge_v) = 3.35; // Fully charged at rest
id(${yambms_id}_cell_max_charge_v) = 3.65;
id(${yambms_id}_cell_max_discharge_v) = 3.00; // Not used
}
@@ -66,8 +76,8 @@ esphome:
id(${yambms_id}_bulk_voltage).traits.set_min_value(round(cell_count * id(${yambms_id}_cell_min_charge_v) * 10) / 10);
id(${yambms_id}_bulk_voltage).traits.set_max_value(round(cell_count * id(${yambms_id}_cell_max_charge_v) * 10) / 10);
// Float V.
id(${yambms_id}_float_voltage).traits.set_min_value(round(cell_count * (id(${yambms_id}_cell_min_charge_v) - 0.1) * 10) / 10);
id(${yambms_id}_float_voltage).traits.set_max_value(round(cell_count * (id(${yambms_id}_cell_min_charge_v) + 0.1) * 10) / 10);
id(${yambms_id}_float_voltage).traits.set_min_value(round(cell_count * (id(${yambms_id}_cell_min_charge_v) - 0.15) * 10) / 10);
id(${yambms_id}_float_voltage).traits.set_max_value(round(cell_count * (id(${yambms_id}_cell_min_charge_v) + 0.05) * 10) / 10);
// Rebulk V.
id(${yambms_id}_rebulk_voltage).traits.set_min_value(round(cell_count * id(${yambms_id}_cell_nominal_v) * 10) / 10);
id(${yambms_id}_rebulk_voltage).traits.set_max_value(round(cell_count * id(${yambms_id}_cell_min_charge_v) * 10) / 10);
@@ -123,6 +133,10 @@ globals:
type: float
restore_value: no
initial_value: '0.0'
- id: ${yambms_id}_auto_float
type: float
restore_value: no
initial_value: '0.0'
- id: ${yambms_id}_eoc
type: bool
restore_value: no
@@ -244,7 +258,7 @@ number:
entity_category: config
# internal: true
- platform: template
name: "${name} ${yambms_name} Max charge current (%)"
name: "${name} ${yambms_name} Max charge current percent"
id: "${yambms_id}_max_charge_current_pct"
step: 1
min_value: 0
@@ -257,7 +271,7 @@ number:
optimistic: true
entity_category: config
- platform: template
name: "${name} ${yambms_name} Max discharge current (%)"
name: "${name} ${yambms_name} Max discharge current percent"
id: "${yambms_id}_max_discharge_current_pct"
step: 1
min_value: 0
@@ -321,9 +335,6 @@ script:
id(${yambms_id}_eoc_timestamp) = id(my_time).utcnow().timestamp; // Store charge completion timestamp
sensor:
# +--------------------------------------+
# | Total Daily Energy |
# +--------------------------------------+
# Battery Charging Power
- platform: template
name: ${name} ${yambms_name} Battery Charging Power
@@ -331,6 +342,7 @@ sensor:
update_interval: ${yambms_update_interval}
unit_of_measurement: 'W'
device_class: power
state_class: measurement
accuracy_decimals: 0
lambda: |-
if (id(${yambms_id}_power).state > 0)
@@ -344,6 +356,7 @@ sensor:
update_interval: ${yambms_update_interval}
unit_of_measurement: 'W'
device_class: power
state_class: measurement
accuracy_decimals: 0
lambda: |-
if (id(${yambms_id}_power).state <= 0)
@@ -355,8 +368,8 @@ sensor:
name: "${name} ${yambms_name} Daily Charging Energy"
power_id: ${yambms_id}_battery_charging_power
unit_of_measurement: 'kWh'
state_class: total_increasing
device_class: energy
state_class: total_increasing
accuracy_decimals: 3
filters:
# Multiplication factor from W to kW is 0.001
@@ -367,8 +380,8 @@ sensor:
name: "${name} ${yambms_name} Daily Discharging Energy"
power_id: ${yambms_id}_battery_discharging_power
unit_of_measurement: 'kWh'
state_class: total_increasing
device_class: energy
state_class: total_increasing
accuracy_decimals: 3
filters:
# Multiplication factor from W to kW is 0.001
@@ -402,6 +415,7 @@ sensor:
update_interval: ${yambms_update_interval}
unit_of_measurement: V
device_class: voltage
state_class: measurement
accuracy_decimals: 1
filters:
- or:
@@ -415,7 +429,7 @@ sensor:
return (id(${yambms_id}_bulk_voltage).state + id(${yambms_id}_inverter_offset_v).state + id(${yambms_id}_auto_cvl));
// Float
else if (id(${yambms_id}_charging_instruction).state == "Float")
return (id(${yambms_id}_float_voltage).state + id(${yambms_id}_inverter_offset_v).state);
return (id(${yambms_id}_float_voltage).state + id(${yambms_id}_inverter_offset_v).state) + id(${yambms_id}_auto_float);
// Stop Charging
else return (id(${yambms_id}_rebulk_voltage).state + id(${yambms_id}_inverter_offset_v).state);
@@ -428,6 +442,7 @@ sensor:
update_interval: ${yambms_update_interval}
unit_of_measurement: V
device_class: voltage
state_class: measurement
accuracy_decimals: 1
filters:
- or:
@@ -448,6 +463,7 @@ sensor:
update_interval: ${yambms_update_interval}
unit_of_measurement: A
device_class: current
state_class: measurement
accuracy_decimals: 1
filters:
- or:
@@ -469,6 +485,7 @@ sensor:
update_interval: ${yambms_update_interval}
unit_of_measurement: A
device_class: current
state_class: measurement
accuracy_decimals: 1
filters:
- or:
@@ -490,6 +507,7 @@ sensor:
update_interval: ${yambms_update_interval}
unit_of_measurement: "%"
device_class: battery
state_class: measurement
accuracy_decimals: 0
filters:
- or:
@@ -584,6 +602,8 @@ text_sensor:
else if (id(${yambms_id}_max_cell_voltage).state <= cell_rebulk_v) id(${yambms_id}_charge_status) = "Bulk";
// SoC <= 85% (default value)
else if (id(${yambms_id}_battery_soc).state <= id(${yambms_id}_rebulk_soc).state) id(${yambms_id}_charge_status) = "Bulk";
// Force Charge requested
else if (id(${yambms_id}_requested_force_charge).state) id(${yambms_id}_charge_status) = "Bulk";
// +-----------------------------------------------+
// | Charging Logic (Bulk) |
+144
View File
@@ -0,0 +1,144 @@
# Updated : 2025.06.19
# Version : 1.1.2
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
select:
- platform: template
name: ${name} ${yambms_name} Automatic Float Voltage
id: ${yambms_id}_auto_float_mode
options:
- "Disabled"
- "Follow"
- "Immediately"
restore_value: true
initial_option: "Disabled"
optimistic: true
entity_category: config
set_action:
- logger.log:
format: "Auto Float chosen option: %s"
args: ["x.c_str()"]
number:
- platform: template
name: "${name} ${yambms_name} Auto Float Voltage Step"
id: "${yambms_id}_auto_float_step_v"
step: 0.1
min_value: 0.1
max_value: 0.5
restore_value: true
mode: "${yambms_input_number_mode}"
initial_value: 0.1
unit_of_measurement: V
icon: mdi:sine-wave
optimistic: true
entity_category: config
- platform: template
name: "${name} ${yambms_name} Auto Float Update Interval"
id: "${yambms_id}_auto_float_interval"
step: 1
min_value: 1
max_value: 10
restore_value: true
mode: "${yambms_input_number_mode}"
initial_value: 3
unit_of_measurement: min
icon: mdi:timer-sand
optimistic: true
entity_category: config
sensor:
# Filter total voltage (max)
- platform: template
id: "auto_float_total_voltage"
update_interval: 30s
filters:
- max:
window_size: 4
lambda: return id(${yambms_id}_total_voltage).state;
# +--------------------------------------+
# | Auto Float Voltage Control |
# +--------------------------------------+
- platform: template
name: ${name} ${yambms_name} Auto Float Voltage
id: auto_float
update_interval: 60s # Keep this at 60s, otherwise "Auto Float Update Interval" won't work!
unit_of_measurement: V
device_class: voltage
#internal: true
filters:
- round: 1
lambda: |-
// Variables
const auto mode = id(${yambms_id}_auto_float_mode).active_index(); // Mode: 0 - Disabled, 1 - Follow, 2 - Immediately
const double bulk_v = id(${yambms_id}_bulk_voltage).state; // Bulk voltage
const double target_float_v = id(${yambms_id}_float_voltage).state; // Target float voltage
const double step_v = id(${yambms_id}_auto_float_step_v).state; // Voltage step for each decrement
const double max_total_v = id(auto_float_total_voltage).state; // Total voltage (mean and max)
const auto update_interval = id(${yambms_id}_auto_float_interval).state; // Update interval in minutes
static double float_v = bulk_v; // Initialize float voltage
static uint8_t time_count = 0; // Interval counter
bool decrement = false;
// Auto Float disabled OR Bulk voltage <= Float voltage
if ((mode == 0) || (bulk_v <= target_float_v))
{
// Return Float voltage
id(${yambms_id}_auto_float) = 0;
return target_float_v;
}
// Auto Float enabled + Floating
else if (id(${yambms_id}_charge_status) == "Float")
{
// Check update interval
if (++time_count >= update_interval)
{
// Follow mode : Wait for battery to drop below current float voltage
if (mode == 1)
{
// Check battery voltage and wait for the battery voltage to reach current float voltage
if ((id(${yambms_id}_total_voltage).state > 0) && (max_total_v <= float_v)) decrement = true;
}
// Immediately mode : Start immediately
else if (mode == 2) decrement = true;
// Decrement Float voltage
if (decrement && (float_v > target_float_v)) float_v -= step_v;
// Stop Decrement
if (float_v < target_float_v) float_v = target_float_v;
// Reset update interval counter
time_count = 0;
}
}
// Auto Float enabled + No Floating
else
{
// Reset values
id(${yambms_id}_auto_float) = 0;
float_v = bulk_v;
time_count = 0;
}
// Store difference for CVL calculation
id(${yambms_id}_auto_float) = float_v - target_float_v;
// Return Auto Float voltage
return float_v;
+44 -15
View File
@@ -1,5 +1,5 @@
# Updated : 2025.06.16
# Version : 1.5.6
# Updated : 2025.07.10
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -382,10 +382,11 @@ sensor:
# max_charge_current SUM
- platform: template
id: ${yambms_id}_max_charge_current
name: "${name} ${yambms_name} Max Charge current (Σ)"
name: "${name} ${yambms_name} Max Charge current"
update_interval: ${yambms_update_interval}
unit_of_measurement: A
device_class: current
state_class: measurement
accuracy_decimals: 0
filters:
- or:
@@ -395,10 +396,11 @@ sensor:
# max_discharge_current SUM
- platform: template
id: ${yambms_id}_max_discharge_current
name: "${name} ${yambms_name} Max Discharge Current (Σ)"
name: "${name} ${yambms_name} Max Discharge Current"
update_interval: ${yambms_update_interval}
unit_of_measurement: A
device_class: current
state_class: measurement
accuracy_decimals: 0
filters:
- or:
@@ -411,6 +413,7 @@ sensor:
name: "${name} ${yambms_name} Min Voltage Cell"
update_interval: ${yambms_update_interval}
icon: mdi:numeric
state_class: measurement
accuracy_decimals: 0
filters:
- or:
@@ -423,6 +426,7 @@ sensor:
name: "${name} ${yambms_name} Max Voltage Cell"
update_interval: ${yambms_update_interval}
icon: mdi:numeric
state_class: measurement
accuracy_decimals: 0
filters:
- or:
@@ -436,6 +440,7 @@ sensor:
update_interval: ${yambms_update_interval}
unit_of_measurement: V
device_class: voltage
state_class: measurement
accuracy_decimals: 3
filters:
- or:
@@ -449,6 +454,7 @@ sensor:
update_interval: ${yambms_update_interval}
unit_of_measurement: V
device_class: voltage
state_class: measurement
accuracy_decimals: 3
filters:
- or:
@@ -462,6 +468,7 @@ sensor:
update_interval: ${yambms_update_interval}
unit_of_measurement: V
device_class: voltage
state_class: measurement
accuracy_decimals: 3
filters:
- or:
@@ -472,10 +479,11 @@ sensor:
# total_voltage MEAN
- platform: template
id: ${yambms_id}_total_voltage
name: "${name} ${yambms_name} Total Voltage (Ø)"
name: "${name} ${yambms_name} Total Voltage"
update_interval: ${yambms_update_interval}
unit_of_measurement: V
device_class: voltage
state_class: measurement
accuracy_decimals: 2
filters:
- or:
@@ -485,10 +493,11 @@ sensor:
# current SUM
- platform: template
id: ${yambms_id}_current
name: "${name} ${yambms_name} Current (Σ)"
name: "${name} ${yambms_name} Current"
update_interval: ${yambms_update_interval}
unit_of_measurement: A
device_class: current
state_class: measurement
accuracy_decimals: 1
filters:
- or:
@@ -498,10 +507,11 @@ sensor:
# power SUM
- platform: template
id: ${yambms_id}_power
name: "${name} ${yambms_name} Power (Σ)"
name: "${name} ${yambms_name} Power"
update_interval: ${yambms_update_interval}
unit_of_measurement: W
device_class: power
state_class: measurement
accuracy_decimals: 0
filters:
- or:
@@ -511,10 +521,11 @@ sensor:
# state_of_charge MEAN
- platform: template
id: ${yambms_id}_state_of_charge
name: "${name} ${yambms_name} SoC (Ø)"
name: "${name} ${yambms_name} SoC"
update_interval: ${yambms_update_interval}
unit_of_measurement: '%'
device_class: battery
state_class: measurement
accuracy_decimals: 0
filters:
- or:
@@ -529,6 +540,7 @@ sensor:
update_interval: ${yambms_update_interval}
unit_of_measurement: "%"
device_class: battery
state_class: measurement
accuracy_decimals: 0
filters:
- or:
@@ -538,10 +550,10 @@ sensor:
# installed_battery_capacity SUM
- platform: template
id: ${yambms_id}_installed_battery_capacity
name: "${name} ${yambms_name} Installed Battery Capacity (Σ)"
name: "${name} ${yambms_name} Installed Battery Capacity"
update_interval: ${yambms_update_interval}
unit_of_measurement: Ah
state_class: total
state_class: measurement
icon: mdi:car-battery
accuracy_decimals: 0
filters:
@@ -553,10 +565,10 @@ sensor:
# battery_capacity SUM
- platform: template
id: ${yambms_id}_battery_capacity
name: "${name} ${yambms_name} Battery Capacity (Σ)"
name: "${name} ${yambms_name} Battery Capacity"
update_interval: ${yambms_update_interval}
unit_of_measurement: Ah
state_class: total
state_class: measurement
icon: mdi:car-battery
accuracy_decimals: 0
filters:
@@ -567,10 +579,10 @@ sensor:
# capacity_remaining_ah SUM
- platform: template
id: ${yambms_id}_capacity_remaining_ah
name: "${name} ${yambms_name} Capacity Remaining (Σ)"
name: "${name} ${yambms_name} Capacity Remaining"
update_interval: ${yambms_update_interval}
unit_of_measurement: Ah
state_class: total
state_class: measurement
icon: mdi:car-battery
accuracy_decimals: 0
filters:
@@ -585,6 +597,7 @@ sensor:
update_interval: ${yambms_update_interval}
unit_of_measurement: V
device_class: voltage
state_class: measurement
accuracy_decimals: 3
filters:
- or:
@@ -598,6 +611,7 @@ sensor:
update_interval: ${yambms_update_interval}
unit_of_measurement: V
device_class: voltage
state_class: measurement
accuracy_decimals: 3
filters:
- or:
@@ -611,6 +625,7 @@ sensor:
update_interval: ${yambms_update_interval}
unit_of_measurement: V
device_class: voltage
state_class: measurement
accuracy_decimals: 3
filters:
- or:
@@ -624,6 +639,7 @@ sensor:
update_interval: ${yambms_update_interval}
unit_of_measurement: °C
device_class: temperature
state_class: measurement
accuracy_decimals: 1
filters:
- or:
@@ -637,6 +653,7 @@ sensor:
update_interval: ${yambms_update_interval}
unit_of_measurement: °C
device_class: temperature
state_class: measurement
accuracy_decimals: 1
filters:
- or:
@@ -649,6 +666,7 @@ sensor:
name: "${name} ${yambms_name} Min temperature sensor"
update_interval: ${yambms_update_interval}
icon: mdi:numeric
state_class: measurement
accuracy_decimals: 0
filters:
- or:
@@ -661,6 +679,7 @@ sensor:
name: "${name} ${yambms_name} Max temperature sensor"
update_interval: ${yambms_update_interval}
icon: mdi:numeric
state_class: measurement
accuracy_decimals: 0
filters:
- or:
@@ -670,9 +689,10 @@ sensor:
# charging_cycles MEAN
- platform: template
id: ${yambms_id}_charging_cycles
name: "${name} ${yambms_name} Charging Cycles (Ø)"
name: "${name} ${yambms_name} Charging Cycles"
update_interval: ${yambms_update_interval}
icon: mdi:counter
state_class: measurement
accuracy_decimals: 0
filters:
- or:
@@ -685,6 +705,7 @@ sensor:
name: "${name} ${yambms_name} Errors Bitmask Alarm"
update_interval: ${yambms_update_interval}
icon: mdi:alert-circle-outline
state_class: measurement
accuracy_decimals: 0
filters:
- or:
@@ -697,6 +718,7 @@ sensor:
name: "${name} ${yambms_name} Errors Bitmask Warning"
update_interval: ${yambms_update_interval}
icon: mdi:alert-circle-outline
state_class: measurement
accuracy_decimals: 0
filters:
- or:
@@ -709,6 +731,7 @@ sensor:
name: "${name} ${yambms_name} BMS in alarm"
update_interval: ${yambms_update_interval}
icon: mdi:counter
state_class: measurement
accuracy_decimals: 0
filters:
- or:
@@ -721,6 +744,7 @@ sensor:
id: ${yambms_id}_bms_count
update_interval: ${yambms_update_interval}
icon: mdi:counter
state_class: measurement
accuracy_decimals: 0
filters:
- or:
@@ -734,6 +758,7 @@ sensor:
id: ${yambms_id}_bms_combined
update_interval: ${yambms_update_interval}
icon: mdi:counter
state_class: measurement
accuracy_decimals: 0
filters:
- or:
@@ -747,6 +772,7 @@ sensor:
id: ${yambms_id}_bms_blocking_charge
update_interval: ${yambms_update_interval}
icon: mdi:counter
state_class: measurement
accuracy_decimals: 0
filters:
- or:
@@ -759,6 +785,7 @@ sensor:
id: ${yambms_id}_bms_blocking_discharge
update_interval: ${yambms_update_interval}
icon: mdi:counter
state_class: measurement
accuracy_decimals: 0
filters:
- or:
@@ -771,6 +798,7 @@ sensor:
id: ${yambms_id}_shunt_count
update_interval: ${yambms_update_interval}
icon: mdi:counter
state_class: measurement
accuracy_decimals: 0
filters:
- or:
@@ -784,6 +812,7 @@ sensor:
id: ${yambms_id}_shunt_combined
update_interval: ${yambms_update_interval}
icon: mdi:counter
state_class: measurement
accuracy_decimals: 0
filters:
- or: