165 Commits
Author SHA1 Message Date
Sleeper85 5da5cce67c YamBMS 1.5.7 updated changelog 2025-07-13 23:35:43 +02:00
Sleeper85 17b7500f0c YamBMS 1.5.7 updated changelog 2025-07-11 14:33:48 +02:00
Sleeper85 b9632e0eb5 Dashboards 1.5.7 - Replaced % with percent in entity names 2025-07-11 14:33:01 +02:00
Sleeper85 53d8a189b2 Replaced % with percent in entity names. 2025-07-11 14:31:24 +02:00
Sleeper85 53e754c753 FAKE Shunt 1.1.3 2025-07-11 14:28:15 +02:00
Sleeper85 5ba0a5cf26 Dashboards 1.5.7 - Max/Min cell voltage in color using macro 2025-07-10 14:46:07 +02:00
Sleeper85 34fda6c92a YamBMS 1.5.7 - Removed special characters in entity name 2025-07-10 13:13:02 +02:00
Sleeper85 5ffffb74b6 Merge pull request #71
Considerably shortens the file by 3x16 repetitions of same code to 3x2 repeats of same macro definition. If only there was a central key/tag to store macros in yaml, we only need to store the macro one time instead of six!

Things tested working on my end:
- configurable high and low cell voltage colours
- adjustable voltage spacing number
2025-07-10 10:15:45 +02:00
Shivam Maurya ef90c2de0d Update YamBMS_HA_Dashboards
DO NOT merge before Copy paste and testing the YAML works in HA dashboard editor.

Considerably shortens the file by 3x16 repetitions of same code to 3x2 repeats of same macro definition.
If only there was a central key/tag to store macros in yaml, we only need to store the macro one time instead of six!
2025-07-09 23:32:49 +05:30
Sleeper85 cdc86cc298 Added max requested charge/discharge current substitutions 2025-07-09 16:53:23 +02:00
Sleeper85 c18b9c8d55 YamBMS 1.5.7 - Added yambms_version substitution 2025-07-09 16:26:38 +02:00
Sleeper85 62b5844ec2 Delete yambms_custom.yaml 2025-07-09 16:25:04 +02:00
Sleeper85 4c6dba8add Dashboards 1.5.7 - Max/Min cell voltage in color with HA 2025.7 compatibility 2025-07-08 16:58:32 +02:00
Sleeper85 da0acaa3c5 Merge PR#70
Dashboards 1.5.7 - With rounded values and max/min cell voltage in color compatible HA `2025.7`
2025-07-08 14:10:32 +02:00
Sleeper85 2fa5b4d4f3 Dashboards 1.5.7 - With max/min cell voltage in color compatible HA 2025.7 2025-07-08 14:07:33 +02:00
Sleeper85 b143d9bd60 Dashboards 1.5.7 compatible HA core 2025.7 2025-07-08 13:37:57 +02:00
Shivam Maurya 1bacb100d1 Update YamBMS_HA_Dashboard_JK_UART-GPS_BLE_3xBMS.yaml
Copy paste and test  the YAML in HA dashboard editor before merging.

Add , rounded=True
and optimized cell voltage display formatting to ensure high/low cell indication works with newest HA 2025.7.1.
2025-07-08 13:15:53 +05:30
Sleeper85 d0e42a27a4 Create bms_options_auto_balance_switch.yaml 2025-07-07 20:53:18 +02:00
Sleeper85 965ad74127 Added JK balance switch ID 2025-07-07 20:28:06 +02:00
Sleeper85 85e3c90043 FAKE BMS charging and discharging power 2025-06-28 12:34:57 +02:00
Sleeper85 32b2dfc450 Merge branch 'main' of https://github.com/Sleeper85/esphome-yambms 2025-06-26 14:28:08 +02:00
Sleeper85 348f7f2e0c YamBMS 1.5.7 - Improved comments regarding entity id and display name 2025-06-26 14:28:03 +02:00
Sleeper85 a6e4f24df5 Update YamBMS_functions.md 2025-06-23 13:11:09 +02:00
Sleeper85 02dec09cfd Update YamBMS 1.5.7 changelog 2025-06-22 18:01:42 +02:00
Sleeper85 750cfd11a5 YamBMS 1.5.7 - Fixed: change Charge Status to Bulk when Force Charge is requested 2025-06-22 16:54:44 +02:00
Sleeper85 b5c05bf350 Update YamBMS 1.5.7 changelog 2025-06-22 14:32:32 +02:00
Sleeper85 b3333e4949 Defining state_class for all YamBMS sensors 2025-06-22 14:05:26 +02:00
Sleeper85 c00aa954f5 esphome min_version changed to 2025.6.0 2025-06-22 14:04:16 +02:00
Sleeper85 a0cfea8b5d YamBMS 1.5.7 2025-06-19 22:12:34 +02:00
Sleeper85 345181c185 YamBMS 1.5.7 - Auto Float function 2025-06-19 22:11:27 +02:00
Sleeper85 7c97912913 Dashboards 1.5.7 2025-06-19 22:08:45 +02:00
Sleeper85 06d2b0fda0 YamBMS 1.5.6 changelog update 2025-06-19 21:49:16 +02:00
Sleeper85 74e36b5a4f YamBMS 1.5.6 - RP20450 RPi Pico Shunts Modbus Server 2025-06-19 08:42:12 +02:00
Sleeper85 fa0f1960cc Merge pull request #51 from GHswitt/PR_RP2040_Shunts
Support for RP2040
2025-06-19 02:46:00 +02:00
Sebastian e6e31c165c Add RP2040 example as Modbus server node for five Victron shunts 2025-06-18 23:20:09 +02:00
Sebastian b7c3eddee4 Add RP2040 support 2025-06-18 23:19:57 +02:00
Sleeper85 92ce28c041 New shunt_base_minimal.yaml for SmartShunt UART minimal version 2025-06-18 08:57:48 +02:00
Sleeper85 9d9769a205 YamBMS 1.5.6 - BASEN RS485 2025-06-17 20:52:24 +02:00
Sleeper85 60c875df23 BMS BASEN RS485 1.1.2 2025-06-17 20:50:28 +02:00
Sleeper85 a10e0085d8 Delete YamBMS_LP_BASEN-RS485.yaml 2025-06-17 20:49:49 +02:00
Sleeper85 d487b756bf Merge pull request #56 from GHswitt/PR_BasengreenBMS
Add support for Basengreen BMS
2025-06-17 20:22:09 +02:00
Sleeper85 9b4596bc43 BMS SEPLOS V1 V2 - Remove bms_combine.yaml 2025-06-17 01:20:49 +02:00
Sleeper85 7a447450cc Improved YamBMS template sensors ( device_class / state_class ) 2025-06-17 00:56:01 +02:00
Sleeper85 0ecc1df3e0 BMS JBD - Fixed issue #65 and added YAML examples 2025-06-16 19:54:50 +02:00
Sleeper85 e9fee50967 BMS EPLOS V1 V2 - splitting the combine YAML to sensors and adding an example YAML 2025-06-16 19:50:10 +02:00
Sleeper85 39543e8b9f Restore shunt_sensors_Junctek_KHF_UART.yaml 1.1.4 2025-06-15 13:10:33 +02:00
Sebastian 88c64f6ba4 Add example for Basengreen BMS 2025-06-15 12:55:19 +02:00
Sebastian 27649631fb Add support for Basengreen BMS
This add support for Basengreen BMS connected via RS485.
See https://github.com/GHswitt/esphome-basen
2025-06-15 12:55:16 +02:00
Sleeper85 e5fc628957 Fixing unit_of_measurement and state_class (bms_base.yaml) 2025-06-15 11:20:24 +02:00
Sleeper85 e6896837de Update README.md 2025-06-14 10:27:16 +02:00
Sleeper85 a353a63ade Update LilyGo T-Connect Pro 2025-06-14 10:18:26 +02:00
Sleeper85 9c5a87fbe7 YamBMS 1.5.6 - Adding LilyGo T-Connect Pro 2025-06-14 10:17:52 +02:00
Sleeper85 9ccbeb6b94 Merge pull request #44 from GHswitt/T-Connect-Pro
Add support for LilyGo T-Connect Pro
2025-06-14 09:51:37 +02:00
Sebastian 1d3a195d9a Add support for LilyGo T-Connect Pro
Add board configuration for https://lilygo.cc/products/t-connect-pro
See also: https://github.com/Xinyuan-LilyGO/T-Connect-Pro/tree/main

Display is disabled by default as updating it is slow and increases
the loop time to >100ms.
2025-06-13 22:00:31 +02:00
Sleeper85 d9cddd2461 Dashboard 1.5.6 - Fixed SoH 2025-06-13 10:12:49 +02:00
Sleeper85 3f50bc224b YamBMS 1.5.6 changelog
n
2025-06-12 23:29:09 +02:00
Sleeper85 777aa40339 Dashboards 1.5.6 2025-06-12 23:11:58 +02:00
Sleeper85 37e65b3036 Merge branch 'main' of https://github.com/Sleeper85/esphome-yambms 2025-06-12 21:51:19 +02:00
Sleeper85 660ff99b5c YamBMS 1.5.6 2025-06-12 21:51:06 +02:00
Sleeper85 214568c6ff Board 1.5.6 2025-06-12 20:51:18 +02:00
Sleeper85 665c25619c Fake charging cycles not internal 2025-06-12 20:49:38 +02:00
Sleeper85 7547ddb780 Max cycles offset to 3000 2025-06-12 20:48:06 +02:00
Sleeper85 6c4e710f45 Base 1.5.6 2025-06-12 20:46:27 +02:00
Sleeper85 a14452eb8e Create MCU_ESP32-S3_YBoard.png 2025-06-12 20:45:01 +02:00
Sleeper85 60291dee68 Merge pull request #61 from GHswitt/PR_Modbus0
Set Modbus BMS values to 0 when BMS goes offline
2025-06-12 20:41:48 +02:00
Sebastian 4a2f6aace1 Set Modbus BMS values to 0 when BMS goes offline 2025-06-12 20:23:10 +02:00
Sleeper85 dec2f7e4f8 Merge pull request #62 from GHswitt/PR_Modbus_Charging_Cycles
Modbus client: Make charging cycles available again
2025-06-12 07:51:06 +02:00
Sebastian 4a8f60817d Modbus client: Make charging cycles available again 2025-06-11 23:22:52 +02:00
Sleeper85 d727463717 Updating Charging Cycles Offset function 2025-06-11 16:58:48 +02:00
Sleeper85 d7ed15c557 Requirements ESPHome 2025.5.0 2025-06-10 21:59:39 +02:00
Sleeper85 1bc7bdfd67 Merge pull request #60 from k2dp2k/main - YamBMS 1.5.6
* Compatibility with `esphome 2025.5.0`
  * Fixed [issue #55](https://github.com/Sleeper85/esphome-yambms/issues/55)
  * Added [feature #32](https://github.com/Sleeper85/esphome-yambms/issues/35) 
  * Added [feature #32](https://github.com/Sleeper85/esphome-yambms/issues/35)
  * New `board_ESP32-S3_YBoard_DJK.yaml` board
2025-06-10 21:57:31 +02:00
Sleeper85 5159e75d62 Update YamBMS 1.5.6 changelog 2025-06-10 21:54:26 +02:00
Sleeper85 8afc7d1eb4 YamBMS 1.5.6 changelog 2025-06-10 21:50:55 +02:00
Sleeper85 ee919ad1f0 Update yambms_canbus.yaml version 2025-06-10 21:45:21 +02:00
Sleeper85 95e0b240ca Update bms_sensors_DEYE_CAN_module_full.yaml version 2025-06-10 21:42:05 +02:00
Sleeper85 a4ccbde14a Update bms_charging_cycles_base.yaml version 2025-06-10 21:40:05 +02:00
Sleeper85 297eb96363 Update bms_battery_soh.yaml version 2025-06-10 21:38:36 +02:00
Sleeper85 82fbdd29f2 Update and rename YamBMS_RP_YBoard_JK-PB_RS485_Modbus_BLE_Shunt.yaml to YamBMS_LP_YBoard_JK-PB_RS485_Modbus.yaml 2025-06-10 21:36:08 +02:00
Sleeper85 0b9eb99e33 Delete .github/workflows/yamllint.yml 2025-06-10 21:31:13 +02:00
Sleeper85 b312d3eb3e Update yambms_config.yaml version 2025-06-10 21:30:03 +02:00
Sleeper85 3209ec910b Update device_base.yaml version 2025-06-10 21:28:58 +02:00
Sleeper85 9da27a5a8b Update yambms_auto_dcl.yaml version 2025-06-10 21:27:54 +02:00
Sleeper85 31260f3ace Update yambms_auto_cvl.yaml version 2025-06-10 21:27:21 +02:00
Sleeper85 0c731d52fc Update yambms_auto_cvl.yaml version 2025-06-10 21:26:21 +02:00
Sleeper85 afec9413dd Update yambms_auto_ccl.yaml version 2025-06-10 21:25:40 +02:00
Sleeper85 a2da3ac19c Update shunt_sensors_Junctek_KHF_UART.yaml version 2025-06-10 21:24:38 +02:00
Sleeper85 afc259c62c Update board_options_rgb_led_status.yaml version 2025-06-10 21:23:39 +02:00
Sleeper85 c2943bac36 Update board_options_cpu_freq_240_esp32.yaml version 2025-06-10 21:22:55 +02:00
Sleeper85 76ed9e0d48 Update board_options_cpu_freq_240_esp32-s3.yaml version 2025-06-10 21:22:28 +02:00
Sleeper85 f3e35028b8 Update board_ESP32_DevKitC_espBerry_2-CH-CAN.yaml version 2025-06-10 21:20:51 +02:00
Sleeper85 e1dd4202ae Update board_ESP32-S3_YBoard_DJK.yaml version 2025-06-10 21:20:20 +02:00
Sleeper85 1ea2e7d66f Update board_ESP32-S3_Touch-LCD-7.yaml version 2025-06-10 21:19:29 +02:00
Sleeper85 15179db113 Update board_ESP32-S3_Touch-LCD-4.3.yaml version 2025-06-10 21:19:01 +02:00
Sleeper85 83e74563b6 Update board_ESP32-S3_AtomS3_ili9xxx.yaml version 2025-06-10 21:18:26 +02:00
Sleeper85 f858597a2b Update board_ESP32-S3_AtomS3_WOD.yaml version 2025-06-10 21:17:57 +02:00
Sleeper85 5c20e87f50 Update board_ESP32-S3_AtomS3R.yaml version 2025-06-10 21:17:23 +02:00
Sleeper85 a67202a70f Update board_ESP32-S3_AtomS3.yaml version 2025-06-10 21:16:43 +02:00
Sleeper85 bdd8e234d9 Update bms_temperature_sensor_6.yaml version 2025-06-10 21:15:58 +02:00
Sleeper85 6d56f796a1 Update bms_temperature_sensor_5.yaml version 2025-06-10 21:15:28 +02:00
Sleeper85 76f6046961 Update bms_temperature_sensor_4.yaml version 2025-06-10 21:14:17 +02:00
Sleeper85 7c7097fa0b Update bms_temperature_sensor_2.yaml version 2025-06-10 21:13:32 +02:00
Sleeper85 86f39195e8 Update bms_sensors_JK_UART_4G-GPS_full.yaml version 2025-06-10 21:12:47 +02:00
Sleeper85 42973d9c9d Update bms_sensors_JK_RS485_Modbus_bms_standard.yaml version 2025-06-10 21:12:16 +02:00
Sleeper85 592274bc59 Update bms_sensors_JK_RS485_Modbus_bms_full.yaml version 2025-06-10 21:11:41 +02:00
Sleeper85 ab04cc92db Update bms_sensors_JK_RS485_Modbus_JK-B_standard.yaml version 2025-06-10 21:11:05 +02:00
Sleeper85 33056b2437 Update bms_sensors_JK_BLE_standard.yaml version 2025-06-10 21:10:09 +02:00
Sleeper85 c1597bd502 Update bms_sensors_JBD_UART_full.yaml version 2025-06-10 21:09:23 +02:00
Sleeper85 d65226a1f9 Update bms_sensors_JBD_BLE_full.yaml version 2025-06-10 21:08:28 +02:00
Sleeper85 558f1bfa47 Update bms_sensors_FAKE.yaml version 2025-06-10 21:07:39 +02:00
Sleeper85 1d71cf895e Update bms_sensors_DEYE_CAN_top_minimal.yaml version 2025-06-10 21:06:05 +02:00
Sleeper85 506e019d6f Update bms_sensors_DEYE_CAN_top_full.yaml 2025-06-10 21:05:22 +02:00
Sleeper85 2284b7db51 Update bms_sensors_DEYE_CAN_module_minimal.yaml version 2025-06-10 21:04:31 +02:00
Sleeper85 cf874f0a0f Update bms_errors_bitmask_JK_UART_4G-GPS.yaml version 2025-06-10 21:03:36 +02:00
Sleeper85 e76a7b4695 Update bms_errors_bitmask_JK_RS485_Modbus.yaml version 2025-06-10 21:02:33 +02:00
Sleeper85 844a74887e Update bms_errors_bitmask_JK_BLE.yaml version 2025-06-10 21:02:04 +02:00
Sleeper85 623c66839a Update bms_errors_bitmask_JBD.yaml version 2025-06-10 21:01:14 +02:00
Sleeper85 726fafd79f Update bms_errors_bitmask_DEYE_CAN.yaml version 2025-06-10 21:00:39 +02:00
Sleeper85 e60f802a68 Update bms_combine_modbus_client.yaml version 2025-06-10 21:00:17 +02:00
Sleeper85 60ed5c132c Update bms_combine_SEPLOS_V1_V2_RS485_bms_full.yaml version 2025-06-10 20:59:43 +02:00
Sleeper85 cd9bd987df Update bms_combine_JK_UART_4G-GPS_minimal.yaml version 2025-06-10 20:59:07 +02:00
Sleeper85 f7a39d6b55 Update bms_combine_JK_RS485_Modbus_sniffer_talk_pin.yaml version 2025-06-10 20:57:22 +02:00
Sleeper85 cea0d98e62 Update bms_combine_JK_RS485_Modbus_sniffer.yaml version 2025-06-10 20:56:41 +02:00
Sleeper85 ada25f475b Update bms_combine_JK_RS485_Modbus_bms_minimal.yaml version 2025-06-10 20:55:49 +02:00
Sleeper85 d0f252265e Update bms_combine_JK_RS485_DISPLAY_full.yaml version 2025-06-10 20:55:15 +02:00
Sleeper85 308ec5f032 Update bms_combine_JK_BLE_V14_full.yaml version 2025-06-10 20:54:14 +02:00
Sleeper85 e9d1239c01 Update bms_combine_DEYE_CAN_module_minimal.yaml version 2025-06-10 20:52:57 +02:00
Sleeper85 58c6429d9c Update bms_combine_DEYE_CAN_module_full.yaml version 2025-06-10 20:51:45 +02:00
Sleeper85 9c747934a4 Update bms_combine_JK_BLE_full.yaml version 2025-06-10 20:50:58 +02:00
Sleeper85 58c50ffe8b Update bms_combine_JK_BLE_minimal.yaml version 2025-06-10 20:48:55 +02:00
k2dp2k 43d70f647f Update YamBMS_RP_YBoard_JK-PB_RS485_Modbus_BLE_Shunt.yaml 2025-06-10 20:30:53 +02:00
k2dp2k 30d428c4fc Rename yam-board.yaml to YamBMS_RP_YBoard_JK-PB_RS485_Modbus_BLE_Shunt.yaml 2025-06-10 20:29:49 +02:00
k2dp2k b4887912af Merge pull request #11 from k2dp2k/codex/zustandsklasse-für-yambms-wiederherstellen
Fix state_class for BMS charging cycle sensor
2025-06-10 20:26:16 +02:00
k2dp2k c9b12fbe87 Set charging cycle sensor state_class to total 2025-06-10 20:25:31 +02:00
k2dp2k 060e44c07d Update device_base.yaml 2025-06-10 20:24:57 +02:00
k2dp2k c3b5f5f88a Update board_options_cpu_freq_240_esp32.yaml 2025-06-10 20:24:05 +02:00
k2dp2k 0272cea3ca Update board_options_cpu_freq_240_esp32-s3.yaml 2025-06-10 20:23:43 +02:00
k2dp2k 64e4c7f0e0 Update device_base.yaml 2025-06-10 20:22:34 +02:00
k2dp2k 7a1d68a3f3 Update device_base.yaml 2025-06-10 20:21:34 +02:00
k2dp2k 1939298992 Merge pull request #10 from k2dp2k/codex/header-in-geänderte-dateien-aktualisieren
Update headers after recent changes
2025-06-10 20:17:26 +02:00
k2dp2k 71a7643ca2 chore: update headers for recent changes 2025-06-10 20:16:56 +02:00
k2dp2k 2a26d7822d Update YamBMS_HA_Dashboard_JK_RS485_3xBMS.yaml 2025-06-08 23:41:10 +02:00
k2dp2k 492c81b9a3 Update YamBMS_HA_Dashboard_JK_RS485_3xBMS.yaml 2025-06-08 23:27:22 +02:00
k2dp2k 45c9cd2efc Merge pull request #9 from k2dp2k/codex/begrenze-charging-cycles-auf-200-und-update-cycle-capacity
Fix cycle capacity calculation
2025-06-08 23:09:20 +02:00
k2dp2k 124688e83f Limit cycle base and improve cycle capacity 2025-06-08 23:09:04 +02:00
k2dp2k 309b43b565 Merge pull request #8 from k2dp2k/codex/füge-manuelle-anpassung-des-cyclecounts-hinzu
Add manual cycle count adjustment
2025-06-08 22:45:56 +02:00
k2dp2k 7a78cf5672 Add adjustable cycle capacity 2025-06-08 22:45:08 +02:00
k2dp2k a11f2b75c8 Add adjustable charging cycles 2025-06-08 22:36:01 +02:00
k2dp2k c83d93874b Merge pull request #7 from k2dp2k/codex/restlaufzeit-zähler-hinzufügen
Add remaining time sensor
2025-06-08 22:30:22 +02:00
k2dp2k c426efa321 Add template sensor for remaining time 2025-06-08 22:30:10 +02:00
k2dp2k 0cabeeced8 Add remaining time sensor for Junctek shunt 2025-06-08 22:22:23 +02:00
k2dp2k 75e2ac8155 Merge pull request #6 from k2dp2k/codex/code-optimieren-im-verzeichnis-packages
Optimize display update timing
2025-06-08 22:11:23 +02:00
k2dp2k 7ca041c8c6 Improve display refresh rate 2025-06-08 22:10:58 +02:00
k2dp2k 0834b934d7 Merge pull request #5 from k2dp2k/codex/probleme-mit-yamllint-beheben
Fix yamllint issues
2025-06-08 22:05:07 +02:00
k2dp2k 679baa2068 chore: remove trailing whitespace for yamllint 2025-06-08 22:04:16 +02:00
k2dp2k 197ecd0957 Update yam-board.yaml 2025-06-08 22:01:06 +02:00
k2dp2k 37d2b3b320 Merge pull request #4 from k2dp2k/codex/datei-umbenennen-in-board_esp32-s3_yboard_djk.yaml
Rename board file
2025-06-08 21:58:36 +02:00
k2dp2k ce351bf7e8 Rename board_YamBoard_Deye_JK.yaml to board_ESP32-S3_YBoard_DJK.yaml 2025-06-08 21:58:10 +02:00
k2dp2k 2f53ed1eb2 meine configfile 2025-06-08 21:57:40 +02:00
k2dp2k 9e9024225d Merge pull request #3 from k2dp2k/codex/finde-probleme-und-mache-vorschläge
Fix docs typo and update DEYE CAN sensors
2025-06-08 21:52:45 +02:00
k2dp2k a74a69a740 Fix typo and DEYE CAN module calculation 2025-06-08 21:52:02 +02:00
k2dp2k 358a87ca2f Merge pull request #2 from k2dp2k/codex/fix-deprecation-warnings-in-esphome-configuration
Update to new ESPHome schema
2025-06-08 21:33:01 +02:00
k2dp2k 2139aee6d8 Update for ESPHome 2025.5 2025-06-08 21:32:49 +02:00
k2dp2k f0b79ad78c Merge pull request #1 from k2dp2k/codex/fehler-in-codebasis-suchen-und-beheben
Fix typo in modbus baud rate comments
2025-06-08 21:27:56 +02:00
k2dp2k a5ae54f8ad Fix Modbus baud rate comments and nominal voltage variable 2025-06-08 21:27:20 +02:00
k2dp2k 933003c4a9 Add files via upload 2025-06-08 21:19:12 +02:00
135 changed files with 6623 additions and 4260 deletions

No files matched your search

@@ -1,5 +1,5 @@
# Updated : 2025.05.13
# Version : 1.5.5
# Updated : 2025.07.08
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -245,6 +245,17 @@ views:
- entity: switch.yambms_demo_yambms_1_automatic_discharge_current
name: Automatic Discharge Current
title: YamBMS - Auto CCL / DCL
- type: entities
entities:
- entity: select.yambms_yambms_1_automatic_float_voltage
name: Automatic Float Voltage
- entity: sensor.yambms_yambms_1_auto_float_voltage
name: Auto Float Voltage
- entity: number.yambms_yambms_1_auto_float_update_interval
name: Update Interval
- entity: number.yambms_yambms_1_auto_float_voltage_step
name: Voltage Step
title: YamBMS - Auto Float
- type: entities
entities:
- entity: number.yambms_demo_yambms_1_rebulk_soc
@@ -256,9 +267,9 @@ views:
title: YamBMS - ReBulk
- type: entities
entities:
- entity: number.yambms_demo_yambms_1_max_charge_current
- entity: number.yambms_demo_yambms_1_max_charge_current_percent
name: Max charge current (%)
- entity: number.yambms_demo_yambms_1_max_discharge_current
- entity: number.yambms_demo_yambms_1_max_discharge_current_percent
name: Max discharge current (%)
title: YamBMS - Max current (%)
- type: entities
@@ -305,20 +316,29 @@ views:
- entity: sensor.yambms_demo_canbus_1_inverter_heartbeat
name: CANBUS 1 Inverter Heartbeat
title: YamBMS - Inverter Heartbeat
- type: entities
- type: entity-filter
entities:
- entity: sensor.yambms_demo_debug_heap_free
- entity: sensor.yambms_debug_free_psram_percent
name: Debug Free PSRAM (%)
- entity: sensor.yambms_debug_free_psram
name: Debug Free PSRAM
- entity: sensor.yambms_debug_heap_free_percent
name: Debug Heap free (%)
- entity: sensor.yambms_demo_debug_heap_free_2
- entity: sensor.yambms_debug_heap_free
name: Debug Heap free
- entity: sensor.yambms_demo_debug_heap_max_block
- entity: sensor.yambms_debug_heap_max_block_percent
name: Debug Heap max block (%)
- entity: sensor.yambms_demo_debug_heap_max_block_2
- entity: sensor.yambms_debug_heap_max_block
name: Debug Heap max block
- entity: sensor.yambms_demo_debug_loop_time
- entity: sensor.yambms_debug_loop_time
name: Debug Loop time
- entity: sensor.yambms_demo_debug_reset_reason
- entity: sensor.yambms_esp32_esphome_version
name: ESPHome version
- entity: sensor.yambms_debug_reset_reason
name: Debug Reset reason
conditions:
- condition: state
state_not: unavailable
title: YamBMS - DEBUG
- title: BMS
type: sections
@@ -355,78 +375,76 @@ views:
- type: markdown
content: >-
<center>Charge : <b>{% if
states('switch.yambms_demo_bms_1_charge_switch') == 'on'
states('switch.yambms_demo_bms_1_charge_switch', rounded=True) == 'on'
%} <font color=#41CD52>{{
states('switch.yambms_demo_bms_1_charge_switch') | upper
states('switch.yambms_demo_bms_1_charge_switch', rounded=True) | upper
}}</font> {% else %} <font color=#3090C7>{{
states('switch.yambms_demo_bms_1_charge_switch') | upper
states('switch.yambms_demo_bms_1_charge_switch', rounded=True) | upper
}}</font> {% endif %}
- type: markdown
content: >-
<center>Discharge : <b> {% if
states('switch.yambms_demo_bms_1_discharge_switch') ==
states('switch.yambms_demo_bms_1_discharge_switch', rounded=True) ==
'on' %} <font color=#41CD52>{{
states('switch.yambms_demo_bms_1_discharge_switch') |
states('switch.yambms_demo_bms_1_discharge_switch', rounded=True) |
upper }}</font> {% else %} <font color=#3090C7>{{
states('switch.yambms_demo_bms_1_discharge_switch') |
states('switch.yambms_demo_bms_1_discharge_switch', rounded=True) |
upper }}</font> {% endif %}
- type: markdown
content: >-
<center>Balance : <b> {% if
states('switch.yambms_demo_bms_1_balance_switch') ==
states('switch.yambms_demo_bms_1_balance_switch', rounded=True) ==
'on' %} <font color=#41CD52>{{
states('switch.yambms_demo_bms_1_balance_switch') |
states('switch.yambms_demo_bms_1_balance_switch', rounded=True) |
upper }}</font> {% else %} <font color=#3090C7>{{
states('switch.yambms_demo_bms_1_balance_switch') |
states('switch.yambms_demo_bms_1_balance_switch', rounded=True) |
upper }}</font> {% endif %}
- type: markdown
content: >-
<center><b><font color=#41CD52 size=4>{{
states('sensor.yambms_demo_bms_1_total_voltage') }}
states('sensor.yambms_demo_bms_1_total_voltage', rounded=True) }}
V</font></b>
- type: markdown
content: >-
<center><b><font color=#41CD52 size=4>{{
states('sensor.yambms_demo_bms_1_current') }} A</font></b>
states('sensor.yambms_demo_bms_1_current', rounded=True) }} A</font></b>
- type: markdown
content: >-
<center><b><font color=#41CD52 size=4>{{
states('sensor.yambms_demo_bms_1_power') }} W</font>
states('sensor.yambms_demo_bms_1_power', rounded=True) }} W</font>
- type: grid
square: false
columns: 2
cards:
- type: markdown
content: >-
<center><b><font size=4>BMS SoC :&nbsp;&nbsp;<font
color=#41CD52 size=4>{{
states('sensor.yambms_demo_bms_1_battery_soc') }}
%</font></font>
<center><b><font size=4>SoC :&nbsp;&nbsp;<font color=#41CD52
size=4>{{ states('sensor.yambms_demo_bms_1_battery_soc', rounded=True)
}} %</font></font>
- type: markdown
content: >-
<center><b><font size=4>Corrected SoC :&nbsp;&nbsp;<font
color=#41CD52 size=4>{{
states('sensor.yambms_demo_bms_1_battery_soc') }}
%</font></font>
<center><b><font size=4>SoH :&nbsp;&nbsp;<font color=#41CD52
size=4>{{ states('sensor.yambms_demo_bms_1_battery_soh', rounded=True)
}} %</font></font>
- type: markdown
content: >-
<center> Battery Capacity :&nbsp;&nbsp;<font color=#41CD52>{{
states('sensor.yambms_demo_bms_1_battery_capacity') }} Ah</font><br>
states('sensor.yambms_demo_bms_1_battery_capacity', rounded=True) }} Ah</font><br>
Cycle Capacity :&nbsp;&nbsp;<font color=#41CD52>12532 Ah</font><br>
Ave. Cell Vol. :&nbsp;&nbsp;<font color=#41CD52>3.329 V</font><br>
Balance Cur. :&nbsp;&nbsp;<font color=#41CD52>0.00 A</font><br>
Max temp. :&nbsp;&nbsp;<font color=#41CD52>{{
states('sensor.yambms_demo_bms_1_max_temperature') }} °C</font>
Max temp. :&nbsp;&nbsp;<font color=#41CD52>{{
states('sensor.yambms_demo_bms_1_max_temperature', rounded=True) }} °C</font>
- type: markdown
content: >-
<center> Remain Capacity :&nbsp;&nbsp;<font color=#41CD52>{{
states('sensor.yambms_demo_bms_1_capacity_remaining') }} Ah</font><br>
states('sensor.yambms_demo_bms_1_capacity_remaining', rounded=True) }} Ah</font><br>
Cycle Count :&nbsp;&nbsp;<font color=#41CD52>
{{ states('sensor.yambms_demo_bms_1_charging_cycles') }}</font><br>
{{ states('sensor.yambms_demo_bms_1_charging_cycles', rounded=True) }}</font><br>
Delta Cell Vol. :&nbsp;&nbsp;<font color=#41CD52>0.007 V</font><br>
MOS temp. :&nbsp;&nbsp;<font color=#41CD52>25.6 °C</font><br>
Min temp. :&nbsp;&nbsp;<font color=#41CD52>{{
states('sensor.yambms_demo_bms_1_min_temperature') }} °C</font>
Min temp. :&nbsp;&nbsp;<font color=#41CD52>{{
states('sensor.yambms_demo_bms_1_min_temperature', rounded=True) }} °C</font>
- type: grid
square: false
columns: 2
@@ -514,78 +532,76 @@ views:
- type: markdown
content: >-
<center>Charge : <b>{% if
states('switch.yambms_demo_bms_2_charge_switch') == 'on'
states('switch.yambms_demo_bms_2_charge_switch', rounded=True) == 'on'
%} <font color=#41CD52>{{
states('switch.yambms_demo_bms_2_charge_switch') | upper
states('switch.yambms_demo_bms_2_charge_switch', rounded=True) | upper
}}</font> {% else %} <font color=#3090C7>{{
states('switch.yambms_demo_bms_2_charge_switch') | upper
states('switch.yambms_demo_bms_2_charge_switch', rounded=True) | upper
}}</font> {% endif %}
- type: markdown
content: >-
<center>Discharge : <b> {% if
states('switch.yambms_demo_bms_2_discharge_switch') ==
states('switch.yambms_demo_bms_2_discharge_switch', rounded=True) ==
'on' %} <font color=#41CD52>{{
states('switch.yambms_demo_bms_2_discharge_switch') |
states('switch.yambms_demo_bms_2_discharge_switch', rounded=True) |
upper }}</font> {% else %} <font color=#3090C7>{{
states('switch.yambms_demo_bms_2_discharge_switch') |
states('switch.yambms_demo_bms_2_discharge_switch', rounded=True) |
upper }}</font> {% endif %}
- type: markdown
content: >-
<center>Balance : <b> {% if
states('switch.yambms_demo_bms_2_balance_switch') ==
states('switch.yambms_demo_bms_2_balance_switch', rounded=True) ==
'on' %} <font color=#41CD52>{{
states('switch.yambms_demo_bms_2_balance_switch') |
states('switch.yambms_demo_bms_2_balance_switch', rounded=True) |
upper }}</font> {% else %} <font color=#3090C7>{{
states('switch.yambms_demo_bms_2_balance_switch') |
states('switch.yambms_demo_bms_2_balance_switch', rounded=True) |
upper }}</font> {% endif %}
- type: markdown
content: >-
<center><b><font color=#41CD52 size=4>{{
states('sensor.yambms_demo_bms_2_total_voltage') }}
states('sensor.yambms_demo_bms_2_total_voltage', rounded=True) }}
V</font></b>
- type: markdown
content: >-
<center><b><font color=#41CD52 size=4>{{
states('sensor.yambms_demo_bms_2_current') }} A</font></b>
states('sensor.yambms_demo_bms_2_current', rounded=True) }} A</font></b>
- type: markdown
content: >-
<center><b><font color=#41CD52 size=4>{{
states('sensor.yambms_demo_bms_2_power') }} W</font>
states('sensor.yambms_demo_bms_2_power', rounded=True) }} W</font>
- type: grid
square: false
columns: 2
cards:
- type: markdown
content: >-
<center><b><font size=4>BMS SoC :&nbsp;&nbsp;<font
color=#41CD52 size=4>{{
states('sensor.yambms_demo_bms_2_battery_soc') }}
%</font></font>
<center><b><font size=4>SoC :&nbsp;&nbsp;<font color=#41CD52
size=4>{{ states('sensor.yambms_demo_bms_2_battery_soc', rounded=True)
}} %</font></font>
- type: markdown
content: >-
<center><b><font size=4>Corrected SoC :&nbsp;&nbsp;<font
color=#41CD52 size=4>{{
states('sensor.yambms_demo_bms_2_battery_soc') }}
%</font></font>
<center><b><font size=4>SoH :&nbsp;&nbsp;<font color=#41CD52
size=4>{{ states('sensor.yambms_demo_bms_2_battery_soh', rounded=True)
}} %</font></font>
- type: markdown
content: >-
<center> Battery Capacity :&nbsp;&nbsp;<font color=#41CD52>{{
states('sensor.yambms_demo_bms_2_battery_capacity') }} Ah</font><br>
states('sensor.yambms_demo_bms_2_battery_capacity', rounded=True) }} Ah</font><br>
Cycle Capacity :&nbsp;&nbsp;<font color=#41CD52>12532 Ah</font><br>
Ave. Cell Vol. :&nbsp;&nbsp;<font color=#41CD52>3.329 V</font><br>
Balance Cur. :&nbsp;&nbsp;<font color=#41CD52>0.00 A</font><br>
Max temp. :&nbsp;&nbsp;<font color=#41CD52>{{
states('sensor.yambms_demo_bms_2_max_temperature') }} °C</font>
Max temp. :&nbsp;&nbsp;<font color=#41CD52>{{
states('sensor.yambms_demo_bms_2_max_temperature', rounded=True) }} °C</font>
- type: markdown
content: >-
<center> Remain Capacity :&nbsp;&nbsp;<font color=#41CD52>{{
states('sensor.yambms_demo_bms_2_capacity_remaining') }} Ah</font><br>
states('sensor.yambms_demo_bms_2_capacity_remaining', rounded=True) }} Ah</font><br>
Cycle Count :&nbsp;&nbsp;<font color=#41CD52>
{{ states('sensor.yambms_demo_bms_2_charging_cycles') }}</font><br>
{{ states('sensor.yambms_demo_bms_2_charging_cycles', rounded=True) }}</font><br>
Delta Cell Vol. :&nbsp;&nbsp;<font color=#41CD52>0.007 V</font><br>
MOS temp. :&nbsp;&nbsp;<font color=#41CD52>25.6 °C</font><br>
Min temp. :&nbsp;&nbsp;<font color=#41CD52>{{
states('sensor.yambms_demo_bms_2_min_temperature') }} °C</font>
Min temp. :&nbsp;&nbsp;<font color=#41CD52>{{
states('sensor.yambms_demo_bms_2_min_temperature', rounded=True) }} °C</font>
- type: grid
square: false
columns: 2
@@ -673,78 +689,76 @@ views:
- type: markdown
content: >-
<center>Charge : <b>{% if
states('switch.yambms_demo_bms_3_charge_switch') == 'on'
states('switch.yambms_demo_bms_3_charge_switch', rounded=True) == 'on'
%} <font color=#41CD52>{{
states('switch.yambms_demo_bms_3_charge_switch') | upper
states('switch.yambms_demo_bms_3_charge_switch', rounded=True) | upper
}}</font> {% else %} <font color=#3090C7>{{
states('switch.yambms_demo_bms_3_charge_switch') | upper
states('switch.yambms_demo_bms_3_charge_switch', rounded=True) | upper
}}</font> {% endif %}
- type: markdown
content: >-
<center>Discharge : <b> {% if
states('switch.yambms_demo_bms_3_discharge_switch') ==
states('switch.yambms_demo_bms_3_discharge_switch', rounded=True) ==
'on' %} <font color=#41CD52>{{
states('switch.yambms_demo_bms_3_discharge_switch') |
states('switch.yambms_demo_bms_3_discharge_switch', rounded=True) |
upper }}</font> {% else %} <font color=#3090C7>{{
states('switch.yambms_demo_bms_3_discharge_switch') |
states('switch.yambms_demo_bms_3_discharge_switch', rounded=True) |
upper }}</font> {% endif %}
- type: markdown
content: >-
<center>Balance : <b> {% if
states('switch.yambms_demo_bms_3_balance_switch') ==
states('switch.yambms_demo_bms_3_balance_switch', rounded=True) ==
'on' %} <font color=#41CD52>{{
states('switch.yambms_demo_bms_3_balance_switch') |
states('switch.yambms_demo_bms_3_balance_switch', rounded=True) |
upper }}</font> {% else %} <font color=#3090C7>{{
states('switch.yambms_demo_bms_3_balance_switch') |
states('switch.yambms_demo_bms_3_balance_switch', rounded=True) |
upper }}</font> {% endif %}
- type: markdown
content: >-
<center><b><font color=#41CD52 size=4>{{
states('sensor.yambms_demo_bms_3_total_voltage') }}
states('sensor.yambms_demo_bms_3_total_voltage', rounded=True) }}
V</font></b>
- type: markdown
content: >-
<center><b><font color=#41CD52 size=4>{{
states('sensor.yambms_demo_bms_3_current') }} A</font></b>
states('sensor.yambms_demo_bms_3_current', rounded=True) }} A</font></b>
- type: markdown
content: >-
<center><b><font color=#41CD52 size=4>{{
states('sensor.yambms_demo_bms_3_power') }} W</font>
states('sensor.yambms_demo_bms_3_power', rounded=True) }} W</font>
- type: grid
square: false
columns: 2
cards:
- type: markdown
content: >-
<center><b><font size=4>BMS SoC :&nbsp;&nbsp;<font
color=#41CD52 size=4>{{
states('sensor.yambms_demo_bms_3_battery_soc') }}
%</font></font>
<center><b><font size=4>SoC :&nbsp;&nbsp;<font color=#41CD52
size=4>{{ states('sensor.yambms_demo_bms_3_battery_soc', rounded=True)
}} %</font></font>
- type: markdown
content: >-
<center><b><font size=4>Corrected SoC :&nbsp;&nbsp;<font
color=#41CD52 size=4>{{
states('sensor.yambms_demo_bms_3_battery_soc') }}
%</font></font>
<center><b><font size=4>SoH :&nbsp;&nbsp;<font color=#41CD52
size=4>{{ states('sensor.yambms_demo_bms_3_battery_soh', rounded=True)
}} %</font></font>
- type: markdown
content: >-
<center> Battery Capacity :&nbsp;&nbsp;<font color=#41CD52>{{
states('sensor.yambms_demo_bms_3_battery_capacity') }} Ah</font><br>
states('sensor.yambms_demo_bms_3_battery_capacity', rounded=True) }} Ah</font><br>
Cycle Capacity :&nbsp;&nbsp;<font color=#41CD52>12532 Ah</font><br>
Ave. Cell Vol. :&nbsp;&nbsp;<font color=#41CD52>3.329 V</font><br>
Balance Cur. :&nbsp;&nbsp;<font color=#41CD52>0.00 A</font><br>
Max temp. :&nbsp;&nbsp;<font color=#41CD52>{{
states('sensor.yambms_demo_bms_3_max_temperature') }} °C</font>
Max temp. :&nbsp;&nbsp;<font color=#41CD52>{{
states('sensor.yambms_demo_bms_3_max_temperature', rounded=True) }} °C</font>
- type: markdown
content: >-
<center> Remain Capacity :&nbsp;&nbsp;<font color=#41CD52>{{
states('sensor.yambms_demo_bms_3_capacity_remaining') }} Ah</font><br>
states('sensor.yambms_demo_bms_3_capacity_remaining', rounded=True) }} Ah</font><br>
Cycle Count :&nbsp;&nbsp;<font color=#41CD52>
{{ states('sensor.yambms_demo_bms_3_charging_cycles') }}</font><br>
{{ states('sensor.yambms_demo_bms_3_charging_cycles', rounded=True) }}</font><br>
Delta Cell Vol. :&nbsp;&nbsp;<font color=#41CD52>0.007 V</font><br>
MOS temp. :&nbsp;&nbsp;<font color=#41CD52>25.6 °C</font><br>
Min temp. :&nbsp;&nbsp;<font color=#41CD52>{{
states('sensor.yambms_demo_bms_3_min_temperature') }} °C</font>
Min temp. :&nbsp;&nbsp;<font color=#41CD52>{{
states('sensor.yambms_demo_bms_3_min_temperature', rounded=True) }} °C</font>
- type: grid
square: false
columns: 2
@@ -818,7 +832,7 @@ views:
hours_to_show: 8
- graph: line
type: sensor
entity: sensor.yambms_demo_shunt_1_soc
entity: sensor.yambms_demo_shunt_1_state_of_charge
detail: 2
name: SoC
hours_to_show: 8
@@ -856,7 +870,7 @@ views:
name: Shunt 1 Current
- entity: sensor.yambms_demo_shunt_1_power
name: Shunt 1 Power
- entity: sensor.yambms_demo_shunt_1_soc
- entity: sensor.yambms_demo_shunt_1_state_of_charge
name: Shunt 1 SoC
- entity: sensor.yambms_demo_shunt_1_temperature
name: Shunt 1 Temperature
File diff suppressed because it is too large. Load diff
File diff suppressed because it is too large. Load diff
File diff suppressed because it is too large. Load diff
@@ -1,5 +1,5 @@
# Updated : 2025.05.13
# Version : 1.5.5
# Updated : 2025.06.19
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -245,6 +245,17 @@ views:
- entity: switch.yambms_yambms_1_automatic_discharge_current
name: Automatic Discharge Current
title: YamBMS - Auto CCL / DCL
- type: entities
entities:
- entity: select.yambms_yambms_1_automatic_float_voltage
name: Automatic Float Voltage
- entity: sensor.yambms_yambms_1_auto_float_voltage
name: Auto Float Voltage
- entity: number.yambms_yambms_1_auto_float_update_interval
name: Update Interval
- entity: number.yambms_yambms_1_auto_float_voltage_step
name: Voltage Step
title: YamBMS - Auto Float
- type: entities
entities:
- entity: number.yambms_yambms_1_rebulk_soc
@@ -256,9 +267,9 @@ views:
title: YamBMS - ReBulk
- type: entities
entities:
- entity: number.yambms_yambms_1_max_charge_current
- entity: number.yambms_yambms_1_max_charge_current_percent
name: Max charge current (%)
- entity: number.yambms_yambms_1_max_discharge_current
- entity: number.yambms_yambms_1_max_discharge_current_percent
name: Max discharge current (%)
title: YamBMS - Max current (%)
- type: entities
@@ -305,18 +316,27 @@ views:
- entity: sensor.yambms_canbus_1_inverter_heartbeat
name: CANBUS 1 Inverter Heartbeat
title: YamBMS - Inverter Heartbeat
- type: entities
- type: entity-filter
entities:
- entity: sensor.yambms_debug_heap_free
- entity: sensor.yambms_debug_free_psram_percent
name: Debug Free PSRAM (%)
- entity: sensor.yambms_debug_free_psram
name: Debug Free PSRAM
- entity: sensor.yambms_debug_heap_free_percent
name: Debug Heap free (%)
- entity: sensor.yambms_debug_heap_free_2
- entity: sensor.yambms_debug_heap_free
name: Debug Heap free
- entity: sensor.yambms_debug_heap_max_block
- entity: sensor.yambms_debug_heap_max_block_percent
name: Debug Heap max block (%)
- entity: sensor.yambms_debug_heap_max_block_2
- entity: sensor.yambms_debug_heap_max_block
name: Debug Heap max block
- entity: sensor.yambms_debug_loop_time
name: Debug Loop time
- entity: sensor.yambms_esp32_esphome_version
name: ESPHome version
- entity: sensor.yambms_debug_reset_reason
name: Debug Reset reason
conditions:
- condition: state
state_not: unavailable
title: YamBMS - DEBUG
+25 -7
View File
@@ -12,10 +12,6 @@
> Examples of BMS and Shunt imports can be found in the [configuration_examples](configuration_examples/) folder.
> You can mix different BMS models, the only condition is that they are numbered in order starting from `1`.
> [!IMPORTANT]
> The current code for `YamBMS` and other components needs to be fixed to work with `esphome 2025.5.0`.
> This will be done as soon as I have more time to devote to it. In the meantime, you should compile with `esphome 2025.4.2` or lower.
> [!IMPORTANT]
> The most important thing for proper functioning of YamBMS is that **the voltage of your BMS is well calibrated**.
> YamBMS logic is based on the `min_cell_voltage` and `max_cell_voltage` voltages of your BMS.
@@ -117,7 +113,7 @@ rx_pin: 22 # to CAN board CRX (with 4.7K resistor except for SN65HVD230)
## Requirements
* [ESPHome 2024.6.0 or higher](https://github.com/esphome/esphome/releases)
* [ESPHome 2025.6.0 or higher](https://github.com/esphome/esphome/releases)
* ESP32 MCU (buying a board with ≥8MB flash is advised if you intend to monitor multiple BMS)
* CAN transceiver (only with TJA1050/TJA1051 => 4.7K resistor for 5V to 3V3 level shifing)
* BMS JK, JBD, Seplos (other BMS brands already integrated with ESPhome can be added easily)
@@ -128,7 +124,7 @@ rx_pin: 22 # to CAN board CRX (with 4.7K resistor except for SN65HVD230)
## Data collection
> [!NOTE]
> For your information, in May 2025 there were `94` YamBMS users.
> For your information, in June 2025 there were `100` YamBMS users.
If the ESP32 has an internet connection, the following data is sent to [this script](http://script.opentel.be/yambms.post.php)
for statistics collection. Only [@Sleeper85](https://github.com/Sleeper85) have access to this information for the production of statistics, the support and the update service.
@@ -146,7 +142,29 @@ for statistics collection. Only [@Sleeper85](https://github.com/Sleeper85) have
## Changelog
* YamBMS 1.5.7 :
* Adapted the default `min/max` values ​​for the `Float` slider
* Merged [PR 53](https://github.com/Sleeper85/esphome-yambms/pull/53) Add feature `Auto Float Voltage`
* New dashboard for `Auto Float Voltage` function
* Defining `state_class` for all YamBMS sensors
* Set esphome `min_version` to `2025.6.0`
* Fixed: change `Charge Status` to `Bulk` when `Force Charge` is requested
* Merged [PR 70](https://github.com/Sleeper85/esphome-yambms/pull/70) Dashboards compatible with `HA 2025.7`
* Merged [PR 70](https://github.com/Sleeper85/esphome-yambms/pull/71) Dashboard `max/min` cell voltage in color using macro
* Removed all special characters in entities name + dashboards correction
* YamBMS 1.5.6 :
* Fixed [issue 58](https://github.com/Sleeper85/esphome-yambms/issues/58) Compilation problem with `esphome 2025.5.0`
* Fixed [issue 55](https://github.com/Sleeper85/esphome-yambms/issues/55) New CPU frequency option
* Fixed [issue 65](https://github.com/Sleeper85/esphome-yambms/issues/65) JBD Circular dependency error
* Fixed [issue 35](https://github.com/Sleeper85/esphome-yambms/issues/35) BMS Charging Cycles Offset
* Merged [PR 51](https://github.com/Sleeper85/esphome-yambms/pull/51) Support for RP2040 RPi Pico
* Merged [PR 56](https://github.com/Sleeper85/esphome-yambms/pull/56) Add support for Basengreen BMS
* Merged [PR 60](https://github.com/Sleeper85/esphome-yambms/pull/60) Fixes for new ESPHome and add of BMS Cycle Count offset
* Merged [PR 61](https://github.com/Sleeper85/esphome-yambms/pull/61) Set Modbus BMS values to 0 when BMS goes offline
* New `board_ESP32-S3_Touch-LCD-4.3.yaml` board
* New `board_ESP32-S3_Touch-LCD-7.yaml` board
* New `board_ESP32-S3_YBoard_DJK.yaml` board
* New `board_RP2040_RPi_Pico.yaml` board
* YamBMS 1.5.5 :
* New `main.yaml` with LP (local packages) and RP (remote packages) versions
* New `board.yaml` with modular UART/CAN interfaces
+221
View File
@@ -0,0 +1,221 @@
# Updated : 2025.06.26
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
######################## YamBMS Local Packages Version #########################
# You need to copy the `packages` folder into the same folder as this YAML in order to compile it.
# Don't forget to configure your WiFi credentials in the secrets.yaml
################################################################################
# Don't forget to configure your WiFi credentials in the secrets.yaml
#
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: INFO # VERBOSE / DEBUG / INFO / WARN
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
# web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | Global Settings |
# +--------------------------------------+
substitutions:
# Name
friendly_name : 'YamBMS' # Prefix added in front of the `entity display name`, also used to classify them.
hostname: 'yambms' # Name of your ESPHome node registered on the IP network (DNS name, must be unique) and prefix added in front of the `entity id`.
name: '' # This name can be added as a second prefix, both for the `entity display name` and the `entity id`, you can leave it blank.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_id: 'yambms1'
yambms_name: 'YamBMS 1'
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# +--------------------------------------+
# | Shunt Settings |
# +--------------------------------------+
shunt_update_interval: '3s' # frequency at which Shunt data is refreshed
shunt_combine_interval: '1s' # frequency at which Shunt data is combined in YamBMS
# +--------------------------------------+
# | BMS Settings |
# +--------------------------------------+
bms_update_interval: '3s' # frequency at which BMS data is refreshed, going below '3s' can cause problems
bms_combine_interval: '1s' # frequency at which BMS data is combined in YamBMS
bms_cutoff_timer: '50s' # time during which the end of charge conditions must be respected (cut-off + cells not equalizing)
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
packages:
############### >>> UNCOMMENT YOUR BOARD <<< ###############
############### >>> ONLY ONE BOARD ! <<< ###############
# This list is incomplete, other board.yaml are available in the board folder
# device_board: !include 'packages/board/board_ESP32_Generic.yaml'
# device_board: !include 'packages/board/board_ESP32_DevKit-V1.yaml'
# device_board: !include 'packages/board/board_ESP32_Atom-Lite.yaml'
# device_board: !include 'packages/board/board_ESP32_EVB.yaml'
device_board: !include 'packages/board/board_ESP32_LilyGo-T-CAN485.yaml'
# device_board: !include 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
# device_board: !include 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_DevKitC-1_LED-38.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_DevKitC-1_LED-48.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_Touch-LCD-4.3.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_Touch-LCD-7.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_XIAO.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_YBoard.yaml'
# device_board: !include
# file: 'packages/board/board_ESP32-S3_AtomS3.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
# device_board: !include
# file: 'packages/board/board_ESP32-S3_AtomS3R.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
########### >>> UNCOMMENT YOUR BOARD OPTIONS <<< ###########
uart_esp_1: !include packages/board/board_options_itf_uart_esp_1.yaml
# uart_esp_2: !include packages/board/board_options_itf_uart_esp_2.yaml
# uart_esp_3: !include packages/board/board_options_itf_uart_esp_3.yaml
# ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit)
canbus_node_1: !include
file: packages/board/board_options_itf_canbus_esp32_can.yaml
vars:
canbus_node_id: 'canbus_inverter_1'
# MCP2515
# canbus_node_2: !include
# file: packages/board/board_options_itf_canbus_mcp2515.yaml
# vars:
# canbus_node_id: 'canbus_inverter_1'
# captive_portal: !include packages/board/board_options_captive_portal.yaml
############################################################
# Basen controller
controller: !include
file: packages/bms/bms_combine_BASEN_RS485_controller.yaml
vars:
basen_uart_id: 'uart_esp_1'
basen_uart_baud_rate: '9600'
basen_controller_id: "basen_controller_1"
# Basen module 1
bms1: !include
file: packages/bms/bms_combine_BASEN_RS485_full.yaml
vars:
bms_id: '1' # must be a number
bms_name: 'BASEN-BMS 1'
bms_address: '0x01'
# Basen module 2
bms2: !include
file: packages/bms/bms_combine_BASEN_RS485_full.yaml
vars:
bms_id: '2' # must be a number
bms_name: 'BASEN-BMS 2'
bms_address: '0x02'
yambms: !include packages/yambms/yambms.yaml
canbus1: !include
file: packages/yambms/yambms_canbus.yaml
vars:
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_inverter_1'
canbus_light_id: 'esp_light'
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
canbus_link_timer: '5s'
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |
# +--------------------------------------+
device_debug: !include
file: packages/base/device_debug_ESP32.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'
+30 -20
View File
@@ -1,5 +1,5 @@
# Updated : 2025.05.13
# Version : 1.5.5
# Updated : 2025.06.26
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -40,7 +40,7 @@ logger:
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
@@ -68,9 +68,9 @@ api:
# +--------------------------------------+
substitutions:
# Name
name: '' # Name that can be added as a second prefix after the friendly name, you can leave it blank.
hostname: 'yambms' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS Demo' # Prefix added in front of all entity names and also to classify them.
friendly_name : 'YamBMS Demo' # Prefix added in front of the `entity display name`, also used to classify them.
hostname: 'yambms' # Name of your ESPHome node registered on the IP network (DNS name, must be unique) and prefix added in front of the `entity id`.
name: '' # This name can be added as a second prefix, both for the `entity display name` and the `entity id`, you can leave it blank.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
@@ -131,20 +131,30 @@ packages:
# This list is incomplete, other board.yaml are available in the board folder
device_board: !include packages/board/board_ESP32_Generic.yaml
# device_board: !include packages/board/board_ESP32_DevKit-V1.yaml
# device_board: !include packages/board/board_ESP32_LilyGo-T-CAN485.yaml
# device_board: !include packages/board/board_ESP32_EVB.yaml
# device_board: !include packages/board/board_ESP32_Atom-Lite.yaml
# device_board: !include packages/board/board_ESP32-C3_DevKitM-1.yaml
# device_board: !include packages/board/board_ESP32-C3_ETH01-EVO.yaml
# device_board: !include packages/board/board_ESP32-S3_DevKitC-1_LED-38.yaml
# device_board: !include packages/board/board_ESP32-S3_DevKitC-1_LED-48.yaml
# device_board: !include packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml
# device_board: !include packages/board/board_ESP32-S3_AtomS3-Lite.yaml
device_board: !include 'packages/board/board_ESP32_Generic.yaml'
# device_board: !include 'packages/board/board_ESP32_DevKit-V1.yaml'
# device_board: !include 'packages/board/board_ESP32_Atom-Lite.yaml'
# device_board: !include 'packages/board/board_ESP32_EVB.yaml'
# device_board: !include 'packages/board/board_ESP32_LilyGo-T-CAN485.yaml'
# device_board: !include 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
# device_board: !include 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_DevKitC-1_LED-38.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_DevKitC-1_LED-48.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_Touch-LCD-4.3.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_Touch-LCD-7.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_XIAO.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_YBoard.yaml'
# device_board: !include
# file: packages/board/board_ESP32-S3_AtomS3.yaml # board_ESP32-S3_AtomS3R.yaml
# file: 'packages/board/board_ESP32-S3_AtomS3.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
# device_board: !include
# file: 'packages/board/board_ESP32-S3_AtomS3R.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
@@ -209,7 +219,7 @@ packages:
bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions
bms_charging_cycles: '178' # charging cycles number Used to calculate the SoH
bms2: !include
file: packages/bms/bms_combine_FAKE.yaml
vars:
+30 -18
View File
@@ -1,5 +1,5 @@
# Updated : 2025.05.13
# Version : 1.5.5
# Updated : 2025.06.26
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -40,7 +40,7 @@ logger:
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
@@ -68,9 +68,9 @@ api:
# +--------------------------------------+
substitutions:
# Name
name: '' # Name that can be added as a second prefix after the friendly name, you can leave it blank.
hostname: 'yambms' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS' # Prefix added in front of all entity names and also to classify them.
friendly_name : 'YamBMS' # Prefix added in front of the `entity display name`, also used to classify them.
hostname: 'yambms' # Name of your ESPHome node registered on the IP network (DNS name, must be unique) and prefix added in front of the `entity id`.
name: '' # This name can be added as a second prefix, both for the `entity display name` and the `entity id`, you can leave it blank.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
@@ -123,18 +123,30 @@ packages:
# This list is incomplete, other board.yaml are available in the board folder
# device_board: !include packages/board/board_ESP32_Generic.yaml
# device_board: !include packages/board/board_ESP32_DevKit-V1.yaml
device_board: !include packages/board/board_ESP32_LilyGo-T-CAN485.yaml
# device_board: !include packages/board/board_ESP32_EVB.yaml
# device_board: !include packages/board/board_ESP32_Atom-Lite.yaml
# device_board: !include packages/board/board_ESP32-C3_ETH01-EVO.yaml
# device_board: !include packages/board/board_ESP32-S3_DevKitC-1.yaml
# device_board: !include packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml
# device_board: !include packages/board/board_ESP32-S3_AtomS3-Lite.yaml
# device_board: !include 'packages/board/board_ESP32_Generic.yaml'
# device_board: !include 'packages/board/board_ESP32_DevKit-V1.yaml'
# device_board: !include 'packages/board/board_ESP32_Atom-Lite.yaml'
# device_board: !include 'packages/board/board_ESP32_EVB.yaml'
device_board: !include 'packages/board/board_ESP32_LilyGo-T-CAN485.yaml'
# device_board: !include 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
# device_board: !include 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_DevKitC-1_LED-38.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_DevKitC-1_LED-48.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_Touch-LCD-4.3.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_Touch-LCD-7.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_XIAO.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_YBoard.yaml'
# device_board: !include
# file: packages/board/board_ESP32-S3_AtomS3.yaml # board_ESP32-S3_AtomS3R.yaml
# file: 'packages/board/board_ESP32-S3_AtomS3.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
# device_board: !include
# file: 'packages/board/board_ESP32-S3_AtomS3R.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
@@ -185,7 +197,7 @@ packages:
bms_name: 'DEYE-BMS 1'
deye_id: '1'
deye_module_id: '0' # Modules are numbered with 0-9
# Deye module 2
bms2: !include
file: packages/bms/bms_combine_DEYE_CAN_module_full.yaml
+257
View File
@@ -0,0 +1,257 @@
# Updated : 2025.06.26
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
######################## YamBMS Local Packages Version #########################
# You need to copy the `packages` folder into the same folder as this YAML in order to compile it.
# Don't forget to configure your WiFi credentials in the secrets.yaml
################################################################################
# Don't forget to configure your WiFi credentials in the secrets.yaml
#
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: INFO # VERBOSE / DEBUG / INFO / WARN
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
# web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | Global Settings |
# +--------------------------------------+
substitutions:
# Name
friendly_name : 'YamBMS' # Prefix added in front of the `entity display name`, also used to classify them.
hostname: 'yambms' # Name of your ESPHome node registered on the IP network (DNS name, must be unique) and prefix added in front of the `entity id`.
name: '' # This name can be added as a second prefix, both for the `entity display name` and the `entity id`, you can leave it blank.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_id: 'yambms1'
yambms_name: 'YamBMS 1'
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# +--------------------------------------+
# | Shunt Settings |
# +--------------------------------------+
shunt_update_interval: '3s' # frequency at which Shunt data is refreshed
shunt_combine_interval: '1s' # frequency at which Shunt data is combined in YamBMS
# +--------------------------------------+
# | BMS Settings |
# +--------------------------------------+
bms_update_interval: '3s' # frequency at which BMS data is refreshed, going below '3s' can cause problems
bms_combine_interval: '1s' # frequency at which BMS data is combined in YamBMS
bms_cutoff_timer: '50s' # time during which the end of charge conditions must be respected (cut-off + cells not equalizing)
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
packages:
################ >>> CONFIG & CUSTOM LP <<< ################
# Local Packages intended for creating custom codes
# or sharing settings between several main.yaml
# yambms_config: !include yambms_config.yaml
# yambms_custom: !include yambms_custom.yaml
############### >>> UNCOMMENT YOUR BOARD <<< ###############
############### >>> ONLY ONE BOARD ! <<< ###############
# This list is incomplete, other board.yaml are available in the board folder
device_board: !include 'packages/board/board_ESP32_Generic.yaml'
# device_board: !include 'packages/board/board_ESP32_DevKit-V1.yaml'
# device_board: !include 'packages/board/board_ESP32_Atom-Lite.yaml'
# device_board: !include 'packages/board/board_ESP32_EVB.yaml'
# device_board: !include 'packages/board/board_ESP32_LilyGo-T-CAN485.yaml'
# device_board: !include 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
# device_board: !include 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_DevKitC-1_LED-38.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_DevKitC-1_LED-48.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_Touch-LCD-4.3.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_Touch-LCD-7.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_XIAO.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_YBoard.yaml'
# device_board: !include
# file: 'packages/board/board_ESP32-S3_AtomS3.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
# device_board: !include
# file: 'packages/board/board_ESP32-S3_AtomS3R.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
########### >>> UNCOMMENT YOUR BOARD OPTIONS <<< ###########
uart_esp_1: !include packages/board/board_options_itf_uart_esp_1.yaml
# uart_esp_2: !include packages/board/board_options_itf_uart_esp_2.yaml
# uart_esp_3: !include packages/board/board_options_itf_uart_esp_3.yaml
# ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit)
canbus_node_1: !include
file: packages/board/board_options_itf_canbus_esp32_can.yaml
vars:
canbus_node_id: 'canbus_inverter_1'
# MCP2515
# canbus_node_2: !include
# file: packages/board/board_options_itf_canbus_mcp2515.yaml
# vars:
# canbus_node_id: 'canbus_inverter_1'
############################################################
# You don't have to import a shunt but you must import at least one BMS.
# shunt1: !include
# file: packages/shunt/shunt_combine_Victron_SmartShunt_UART.yaml # shunt_combine_Junctek_KHF_UART.yaml
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_uart_id: 'uart_esp_3'
# shunt1: !include
# file: packages/shunt/shunt_combine_Victron_SmartShunt_BLE.yaml
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_mac_address: '60:A4:23:91:8F:55' # Your MAC address
# shunt_encryption_key: '0df4d0395b7d1a876c0c33ecb9e70dcd' # Your encryption key
bms1: !include
file: packages/bms/bms_combine_JBD_UART_full.yaml
vars:
bms_id: '1' # must be a number
bms_name: 'BMS 1'
bms_uart_id: 'uart_esp_1'
bms_rx_timeout: '150ms'
# Required settings cannot be retrieved from BMS
# These values ​​must match your BMS settings
# LFP values example
bms_max_charge_current: '100' # A. Used to calculate maximum charge current
bms_max_discharge_current: '100' # A. Used to calculate maximum discharge current
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
bms2: !include
file: packages/bms/bms_combine_JBD_BLE_full.yaml
vars:
bms_id: '2' # must be a number
bms_name: 'BMS 2'
bms_ble_mac_address: 'C8:47:8C:10:7E:AA' # Your MAC address
# Required settings cannot be retrieved from BMS
# These values ​​must match your BMS settings
# LFP values example
bms_max_charge_current: '100' # A. Used to calculate maximum charge current
bms_max_discharge_current: '100' # A. Used to calculate maximum discharge current
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
yambms: !include packages/yambms/yambms.yaml
canbus1: !include
file: packages/yambms/yambms_canbus.yaml
vars:
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_inverter_1'
canbus_light_id: 'esp_light'
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
canbus_link_timer: '5s'
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |
# +--------------------------------------+
device_debug: !include
file: packages/base/device_debug_ESP32.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'
+39 -21
View File
@@ -1,5 +1,5 @@
# Updated : 2025.05.13
# Version : 1.5.5
# Updated : 2025.06.26
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -40,7 +40,7 @@ logger:
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
@@ -68,9 +68,9 @@ api:
# +--------------------------------------+
substitutions:
# Name
name: '' # Name that can be added as a second prefix after the friendly name, you can leave it blank.
hostname: 'yambms' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS' # Prefix added in front of all entity names and also to classify them.
friendly_name : 'YamBMS' # Prefix added in front of the `entity display name`, also used to classify them.
hostname: 'yambms' # Name of your ESPHome node registered on the IP network (DNS name, must be unique) and prefix added in front of the `entity id`.
name: '' # This name can be added as a second prefix, both for the `entity display name` and the `entity id`, you can leave it blank.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
@@ -131,20 +131,30 @@ packages:
# This list is incomplete, other board.yaml are available in the board folder
# device_board: !include packages/board/board_ESP32_Generic.yaml
# device_board: !include packages/board/board_ESP32_DevKit-V1.yaml
# device_board: !include packages/board/board_ESP32_LilyGo-T-CAN485.yaml
# device_board: !include packages/board/board_ESP32_EVB.yaml
# device_board: !include packages/board/board_ESP32_Atom-Lite.yaml
# device_board: !include packages/board/board_ESP32-C3_DevKitM-1.yaml
# device_board: !include packages/board/board_ESP32-C3_ETH01-EVO.yaml
# device_board: !include packages/board/board_ESP32-S3_DevKitC-1_LED-38.yaml
# device_board: !include packages/board/board_ESP32-S3_DevKitC-1_LED-48.yaml
device_board: !include packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml
# device_board: !include packages/board/board_ESP32-S3_AtomS3-Lite.yaml
# device_board: !include 'packages/board/board_ESP32_Generic.yaml'
# device_board: !include 'packages/board/board_ESP32_DevKit-V1.yaml'
# device_board: !include 'packages/board/board_ESP32_Atom-Lite.yaml'
# device_board: !include 'packages/board/board_ESP32_EVB.yaml'
# device_board: !include 'packages/board/board_ESP32_LilyGo-T-CAN485.yaml'
# device_board: !include 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
# device_board: !include 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_DevKitC-1_LED-38.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_DevKitC-1_LED-48.yaml'
device_board: !include 'packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_Touch-LCD-4.3.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_Touch-LCD-7.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_XIAO.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_YBoard.yaml'
# device_board: !include
# file: packages/board/board_ESP32-S3_AtomS3.yaml # board_ESP32-S3_AtomS3R.yaml
# file: 'packages/board/board_ESP32-S3_AtomS3.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
# device_board: !include
# file: 'packages/board/board_ESP32-S3_AtomS3R.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
@@ -178,6 +188,14 @@ packages:
# shunt_name: 'Shunt 1'
# shunt_uart_id: 'uart_esp_3'
# shunt1: !include
# file: packages/shunt/shunt_combine_Victron_SmartShunt_BLE.yaml
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_mac_address: '60:A4:23:91:8F:55' # Your MAC address
# shunt_encryption_key: '0df4d0395b7d1a876c0c33ecb9e70dcd' # Your encryption key
# The sniffer represents the ESP node connected to the JK-BMS PB RS485 bus
# If address 0x00 is not detected on the RS485 bus, the sniffer will act directly as a master BMS (mode 2, max 15 BMS)
@@ -206,7 +224,7 @@ packages:
bms_id: '1' # must be a number
bms_name: 'JK-BMS 1'
bms_address: '0x01' # BMS 1 DIP switch
bms2: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
vars:
@@ -236,7 +254,7 @@ packages:
bms_id: '4' # must be a number
bms_name: 'JK-BMS 4'
bms_address: '0x04' # BMS 4 DIP switch
bms5: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
vars:
+15 -15
View File
@@ -1,5 +1,5 @@
# Updated : 2025.05.13
# Version : 1.5.5
# Updated : 2025.06.26
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -40,7 +40,7 @@ logger:
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
@@ -68,9 +68,9 @@ api:
# +--------------------------------------+
substitutions:
# Name
name: '' # Name that can be added as a second prefix after the friendly name, you can leave it blank.
hostname: 'pvbrain2' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS' # Prefix added in front of all entity names and also to classify them.
friendly_name : 'YamBMS' # Prefix added in front of the `entity display name`, also used to classify them.
hostname: 'pvbrain2' # Name of your ESPHome node registered on the IP network (DNS name, must be unique) and prefix added in front of the `entity id`.
name: '' # This name can be added as a second prefix, both for the `entity display name` and the `entity id`, you can leave it blank.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
@@ -112,14 +112,14 @@ substitutions:
# +--------------------------------------+
# | WK2168 UART expander |
# +--------------------------------------+
uart0_baudrate: '2400' #WKS {RJ45-UART0}
uart0_baudrate: '2400' #WKS {RJ45-UART0}
uart1_baudrate: '38400' #JSY193
uart2_baudrate: '19200' #SmartShunt
uart3_baudrate: '9600' #SRNE {RJ45-UART3}
uart3_baudrate: '9600' #SRNE {RJ45-UART3}
uart4_baudrate: '115200' #JK-BMS 1
uart5_baudrate: '115200' #JK-BMS 2
uart6_baudrate: '115200' #Pylontech
uart7_baudrate: '9600' #EPEVER {RJ45-UART7}
uart7_baudrate: '9600' #EPEVER {RJ45-UART7}
# +--------------------------------------+
# | PVbrain2 packages |
@@ -157,12 +157,12 @@ packages:
# You don't have to import a shunt but you must import at least one BMS.
shunt1: !include
file: packages/shunt/shunt_combine_Victron_SmartShunt_UART_expander.yaml # shunt_combine_Junctek_KHF_UART.yaml
vars:
shunt_id: '1' # must be a number
shunt_name: 'Shunt 1'
shunt_uart_id: 'uart_${uart_hub_bus}_2'
# shunt1: !include
# file: packages/shunt/shunt_combine_Victron_SmartShunt_UART_expander.yaml # shunt_combine_Junctek_KHF_UART.yaml
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_uart_id: 'uart_${uart_hub_bus}_2'
bms1: !include
file: packages/bms/bms_combine_JK_UART_4G-GPS_full.yaml
+116
View File
@@ -0,0 +1,116 @@
# Updated : 2025.06.26
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
######################## YamBMS Local Packages Version #########################
# You need to copy the `packages` folder into the same folder as this YAML in order to compile it.
# Don't forget to configure your WiFi credentials in the secrets.yaml
################################################################################
logger:
level: INFO # VERBOSE / DEBUG / INFO / WARN
# +--------------------------------------+
# | Global Settings |
# +--------------------------------------+
substitutions:
# Name
friendly_name : 'YamBMS' # Prefix added in front of the `entity display name`, also used to classify them.
hostname: 'yambms' # Name of your ESPHome node registered on the IP network (DNS name, must be unique) and prefix added in front of the `entity id`.
name: '' # This name can be added as a second prefix, both for the `entity display name` and the `entity id`, you can leave it blank.
# +--------------------------------------+
# | Shunt Settings |
# +--------------------------------------+
shunt_update_interval: '5s' # frequency at which Shunt data is refreshed
shunt_combine_interval: '1s' # frequency at which Shunt data is combined in YamBMS
# +--------------------------------------+
# | Modbus Settings |
# +--------------------------------------+
modbus_update_interval: '5s' # frequency with which BMS/Shunt modbus servers are queried
modbus_baud_rate: '19200' # 9600 / 19200 / 11520
modbus_command_throttle: '0ms' # minimum time in between 2 requests to the device
modbus_send_wait_time: '250ms' # time in milliseconds before the next ModBUS command is sent if an answer from a previous command is pending
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
packages:
################ >>> CONFIG & CUSTOM LP <<< ################
# Local Packages intended for creating custom codes
# or sharing settings between several main.yaml
# yambms_config: !include yambms_config.yaml
# yambms_custom: !include yambms_custom.yaml
############################################################
device_board: !include packages/board/board_RP2040_RPi_Pico.yaml
uart_1: !include packages/board/board_options_itf_uart_1.yaml
uart_2: !include packages/board/board_options_itf_uart_2.yaml
uart_3: !include packages/board/board_options_itf_uart_3.yaml
uart_4: !include packages/board/board_options_itf_uart_4.yaml
uart_5: !include packages/board/board_options_itf_uart_5.yaml
uart_6: !include packages/board/board_options_itf_uart_6.yaml
modbus: !include
file: packages/base/device_modbus.yaml
vars:
modbus_role: 'server' # client / server
modbus_uart_id: 'uart_1' # RS485 board
shunt1: !include
file: packages/shunt/shunt_modbus_Victron_SmartShunt_UART_minimal.yaml
vars:
shunt_id: '1'
shunt_name: 'Shunt 1'
shunt_uart_id: 'uart_2'
shunt2: !include
file: packages/shunt/shunt_modbus_Victron_SmartShunt_UART_minimal.yaml
vars:
shunt_id: '2'
shunt_name: 'Shunt 2'
shunt_uart_id: 'uart_3'
shunt3: !include
file: packages/shunt/shunt_modbus_Victron_SmartShunt_UART_minimal.yaml
vars:
shunt_id: '3'
shunt_name: 'Shunt 3'
shunt_uart_id: 'uart_4'
shunt4: !include
file: packages/shunt/shunt_modbus_Victron_SmartShunt_UART_minimal.yaml
vars:
shunt_id: '4'
shunt_name: 'Shunt 4'
shunt_uart_id: 'uart_5'
shunt5: !include
file: packages/shunt/shunt_modbus_Victron_SmartShunt_UART_minimal.yaml
vars:
shunt_id: '5'
shunt_name: 'Shunt 5'
shunt_uart_id: 'uart_6'
+205
View File
@@ -0,0 +1,205 @@
# Updated : 2025.06.26
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
######################## YamBMS Local Packages Version #########################
# You need to copy the `packages` folder into the same folder as this YAML in order to compile it.
# Don't forget to configure your WiFi credentials in the secrets.yaml
################################################################################
# Don't forget to configure your WiFi credentials in the secrets.yaml
#
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: INFO # VERBOSE / DEBUG / INFO / WARN
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
#web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | Global Settings |
# +--------------------------------------+
substitutions:
# Name
friendly_name : 'YamBMS' # Prefix added in front of the `entity display name`, also used to classify them.
hostname: 'yambms' # Name of your ESPHome node registered on the IP network (DNS name, must be unique) and prefix added in front of the `entity id`.
name: '' # This name can be added as a second prefix, both for the `entity display name` and the `entity id`, you can leave it blank.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_id: 'yambms1'
yambms_name: 'YamBMS 1'
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '60'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '300'
# +--------------------------------------+
# | Shunt Settings |
# +--------------------------------------+
shunt_update_interval: '3s' # frequency at which Shunt data is refreshed
shunt_combine_interval: '1s' # frequency at which Shunt data is combined in YamBMS
# +--------------------------------------+
# | BMS Settings |
# +--------------------------------------+
bms_update_interval: '3s' # frequency at which BMS data is refreshed, going below '3s' can cause problems
bms_combine_interval: '1s' # frequency at which BMS data is combined in YamBMS
bms_cutoff_timer: '50s' # time during which the end of charge conditions must be respected (cut-off + cells not equalizing)
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
packages:
################ >>> CONFIG & CUSTOM LP <<< ################
# Local Packages intended for creating custom codes
# or sharing settings between several main.yaml
# yambms_config: !include yambms_config.yaml
# yambms_custom: !include yambms_custom.yaml
############### >>> UNCOMMENT YOUR BOARD <<< ###############
############### >>> ONLY ONE BOARD ! <<< ###############
device_board: !include packages/board/board_ESP32-S3_YBoard.yaml
########### >>> UNCOMMENT YOUR BOARD OPTIONS <<< ###########
uart_esp_1: !include packages/board/board_options_itf_uart_esp_1.yaml
# ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit)
canbus_node_1: !include
file: packages/board/board_options_itf_canbus_esp32_can.yaml
vars:
canbus_node_id: 'canbus_inverter_1'
############################################################
# You don't have to import a shunt but you must import at least one BMS.
shunt1: !include
file: packages/shunt/shunt_combine_Victron_SmartShunt_BLE.yaml
vars:
shunt_id: '1' # must be a number
shunt_name: 'Shunt'
shunt_mac_address: 'c0960b5d8cba'
shunt_encryption_key: '1e196f635d4e5b0777afa79b47904937'
sniffer1: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_sniffer.yaml
vars:
sniffer_id: 'sniffer1'
sniffer_protocol: 'JK02_32S'
sniffer_uart_id: 'uart_esp_1'
# Mode2 : configure the DIP switches of your BMS from 0x01 to 0x0F (don't use the 0x00 address, maximum 15 BMS)
bms1: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '1' # must be a number
bms_name: 'JK-BMS 1'
bms_address: '0x01' # BMS 1 DIP switch
bms2: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '2' # must be a number
bms_name: 'JK-BMS 2'
bms_address: '0x02' # BMS 2 DIP switch
yambms: !include packages/yambms/yambms.yaml
canbus1: !include
file: packages/yambms/yambms_canbus.yaml
vars:
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_inverter_1'
canbus_light_id: 'esp_light'
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
canbus_link_timer: '5s'
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |
# +--------------------------------------+
device_debug: !include
file: packages/base/device_debug_ESP32.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'
+43 -25
View File
@@ -1,5 +1,5 @@
# Updated : 2025.05.13
# Version : 1.5.5
# Updated : 2025.06.26
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -40,7 +40,7 @@ logger:
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
@@ -68,9 +68,9 @@ api:
# +--------------------------------------+
substitutions:
# Name
name: '' # Name that can be added as a second prefix after the friendly name, you can leave it blank.
hostname: 'yambms' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS' # Prefix added in front of all entity names and also to classify them.
friendly_name : 'YamBMS' # Prefix added in front of the `entity display name`, also used to classify them.
hostname: 'yambms' # Name of your ESPHome node registered on the IP network (DNS name, must be unique) and prefix added in front of the `entity id`.
name: '' # This name can be added as a second prefix, both for the `entity display name` and the `entity id`, you can leave it blank.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
@@ -131,20 +131,30 @@ packages:
# This list is incomplete, other board.yaml are available in the board folder
device_board: !include packages/board/board_ESP32_Generic.yaml
# device_board: !include packages/board/board_ESP32_DevKit-V1.yaml
# device_board: !include packages/board/board_ESP32_LilyGo-T-CAN485.yaml
# device_board: !include packages/board/board_ESP32_EVB.yaml
# device_board: !include packages/board/board_ESP32_Atom-Lite.yaml
# device_board: !include packages/board/board_ESP32-C3_DevKitM-1.yaml
# device_board: !include packages/board/board_ESP32-C3_ETH01-EVO.yaml
# device_board: !include packages/board/board_ESP32-S3_DevKitC-1_LED-38.yaml
# device_board: !include packages/board/board_ESP32-S3_DevKitC-1_LED-48.yaml
# device_board: !include packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml
# device_board: !include packages/board/board_ESP32-S3_AtomS3-Lite.yaml
device_board: !include 'packages/board/board_ESP32_Generic.yaml'
# device_board: !include 'packages/board/board_ESP32_DevKit-V1.yaml'
# device_board: !include 'packages/board/board_ESP32_Atom-Lite.yaml'
# device_board: !include 'packages/board/board_ESP32_EVB.yaml'
# device_board: !include 'packages/board/board_ESP32_LilyGo-T-CAN485.yaml'
# device_board: !include 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
# device_board: !include 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_DevKitC-1_LED-38.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_DevKitC-1_LED-48.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_Touch-LCD-4.3.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_Touch-LCD-7.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_XIAO.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_YBoard.yaml'
# device_board: !include
# file: packages/board/board_ESP32-S3_AtomS3.yaml # board_ESP32-S3_AtomS3R.yaml
# file: 'packages/board/board_ESP32-S3_AtomS3.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
# device_board: !include
# file: 'packages/board/board_ESP32-S3_AtomS3R.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
@@ -171,12 +181,20 @@ packages:
# You don't have to import a shunt but you must import at least one BMS.
shunt1: !include
file: packages/shunt/shunt_combine_Victron_SmartShunt_UART.yaml # shunt_combine_Junctek_KHF_UART.yaml
vars:
shunt_id: '1' # must be a number
shunt_name: 'Shunt 1'
shunt_uart_id: 'uart_esp_3'
# shunt1: !include
# file: packages/shunt/shunt_combine_Victron_SmartShunt_UART.yaml # shunt_combine_Junctek_KHF_UART.yaml
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_uart_id: 'uart_esp_3'
# shunt1: !include
# file: packages/shunt/shunt_combine_Victron_SmartShunt_BLE.yaml
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_mac_address: '60:A4:23:91:8F:55' # Your MAC address
# shunt_encryption_key: '0df4d0395b7d1a876c0c33ecb9e70dcd' # Your encryption key
bms1: !include
file: packages/bms/bms_combine_JK_UART_4G-GPS_full.yaml
+286
View File
@@ -0,0 +1,286 @@
# Updated : 2025.06.26
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
######################## YamBMS Remote Packages Version ########################
# You can compile this YAML directly without the `packages` folder.
# The packages will be automatically downloaded from GitHub.
# Don't forget to configure your WiFi credentials in the secrets.yaml
################################################################################
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: INFO # VERBOSE / DEBUG / INFO / WARN
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
# web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | Global Settings |
# +--------------------------------------+
substitutions:
# Name
friendly_name : 'YamBMS' # Prefix added in front of the `entity display name`, also used to classify them.
hostname: 'yambms' # Name of your ESPHome node registered on the IP network (DNS name, must be unique) and prefix added in front of the `entity id`.
name: '' # This name can be added as a second prefix, both for the `entity display name` and the `entity id`, you can leave it blank.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_id: 'yambms1'
yambms_name: 'YamBMS 1'
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# +--------------------------------------+
# | Shunt Settings |
# +--------------------------------------+
shunt_update_interval: '3s' # frequency at which Shunt data is refreshed
shunt_combine_interval: '1s' # frequency at which Shunt data is combined in YamBMS
# +--------------------------------------+
# | BMS Settings |
# +--------------------------------------+
bms_update_interval: '3s' # frequency at which BMS data is refreshed, going below '3s' can cause problems
bms_combine_interval: '1s' # frequency at which BMS data is combined in YamBMS
bms_cutoff_timer: '50s' # time during which the end of charge conditions must be respected (cut-off + cells not equalizing)
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
packages:
################ >>> CONFIG & CUSTOM LP <<< ################
# Local Packages intended for creating custom codes
# or sharing settings between several main.yaml
# yambms_config: !include yambms_config.yaml
# yambms_custom: !include yambms_custom.yaml
############### >>> UNCOMMENT YOUR BOARD <<< ###############
############### >>> ONLY ONE BOARD ! <<< ###############
board:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
# - path: 'packages/board/board_ESP32_Generic.yaml'
# - path: 'packages/board/board_ESP32_DevKit-V1.yaml'
# - path: 'packages/board/board_ESP32_Atom-Lite.yaml'
# - path: 'packages/board/board_ESP32_EVB.yaml'
- path: 'packages/board/board_ESP32_LilyGo-T-CAN485.yaml'
# - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
# - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
# - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
# - path: 'packages/board/board_ESP32-S3_DevKitC-1_LED-38.yaml'
# - path: 'packages/board/board_ESP32-S3_DevKitC-1_LED-48.yaml'
# - path: 'packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml'
# - path: 'packages/board/board_ESP32-S3_Touch-LCD-4.3.yaml'
# - path: 'packages/board/board_ESP32-S3_Touch-LCD-7.yaml'
# - path: 'packages/board/board_ESP32-S3_XIAO.yaml'
# - path: 'packages/board/board_ESP32-S3_YBoard.yaml'
# - path: 'packages/board/board_ESP32-S3_AtomS3.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
# - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
# LilyGo T-Connect Pro
# Importing the display also activates PSRAM.
# Also note that the display update takes about 120 ms, as indicated in the logs:
# "Component display took a long time for an operation (124 ms)."
# Board
# - path: 'packages/board/board_ESP32-S3_LilyGo-T-Connect-Pro.yaml'
# Display
# - path: 'packages/board/board_options_display_480x222.yaml'
# vars:
# display_auto_next_page_interval: '5s'
########### >>> UNCOMMENT YOUR BOARD OPTIONS <<< ###########
board_options:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
# UART 1
- path: 'packages/board/board_options_itf_uart_esp_1.yaml'
# UART 2
# - path: 'packages/board/board_options_itf_uart_esp_2.yaml'
# UART 3
# - path: 'packages/board/board_options_itf_uart_esp_3.yaml'
# ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit)
- path: 'packages/board/board_options_itf_canbus_esp32_can.yaml'
vars:
canbus_node_id: 'canbus_inverter_1'
# MCP2515
# - path: 'packages/board/board_options_itf_canbus_mcp2515.yaml'
# vars:
# canbus_node_id: 'canbus_inverter_1'
############################################################
# You don't have to import a shunt but you must import at least one BMS.
# UART Shunt
# shunt:
# url: https://github.com/Sleeper85/esphome-yambms
# ref: main
# refresh: 0s
# files:
# # Shunt 1
# - path: 'packages/shunt/shunt_combine_Victron_SmartShunt_UART.yaml' # shunt_combine_Junctek_KHF_UART.yaml
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_uart_id: 'uart_esp_3'
# BLE Shunt
# shunt:
# url: https://github.com/Sleeper85/esphome-yambms
# ref: main
# refresh: 0s
# files:
# # Shunt 1
# - path: 'packages/shunt/shunt_combine_Victron_SmartShunt_BLE.yaml'
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_mac_address: '60:A4:23:91:8F:55' # Your MAC address
# shunt_encryption_key: '0df4d0395b7d1a876c0c33ecb9e70dcd' # Your encryption key
bms:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
# Basen controller
- path: packages/bms/bms_combine_BASEN_RS485_controller.yaml
vars:
basen_uart_id: 'uart_esp_1'
basen_uart_baud_rate: '9600'
basen_controller_id: "basen_controller_1"
# Basen module 1
- path: packages/bms/bms_combine_BASEN_RS485_full.yaml
vars:
bms_id: '1' # must be a number
bms_name: 'BASEN-BMS 1'
bms_address: '0x01'
# Basen module 2
- path: packages/bms/bms_combine_BASEN_RS485_full.yaml
vars:
bms_id: '2' # must be a number
bms_name: 'BASEN-BMS 2'
bms_address: '0x02'
yambms:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: 'packages/yambms/yambms.yaml'
canbus:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: 'packages/yambms/yambms_canbus.yaml'
vars:
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_inverter_1'
canbus_light_id: 'esp_light'
# The CANBUS link will be considered down if no response from the inverter (0x305 frame) for 5s
# The Deye inverter sends the ACK 0x305 only when it receives the 0x356 frame.
canbus_link_timer: '5s'
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |
# +--------------------------------------+
debug:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: packages/base/device_debug_ESP32.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'
+25 -10
View File
@@ -1,5 +1,5 @@
# Updated : 2025.05.13
# Version : 1.5.5
# Updated : 2025.06.26
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -39,7 +39,7 @@ logger:
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
@@ -67,9 +67,9 @@ api:
# +--------------------------------------+
substitutions:
# Name
name: '' # Name that can be added as a second prefix after the friendly name, you can leave it blank.
hostname: 'yambms' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS Demo' # Prefix added in front of all entity names and also to classify them.
friendly_name : 'YamBMS Demo' # Prefix added in front of the `entity display name`, also used to classify them.
hostname: 'yambms' # Name of your ESPHome node registered on the IP network (DNS name, must be unique) and prefix added in front of the `entity id`.
name: '' # This name can be added as a second prefix, both for the `entity display name` and the `entity id`, you can leave it blank.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
@@ -135,15 +135,19 @@ packages:
files:
- path: 'packages/board/board_ESP32_Generic.yaml'
# - path: 'packages/board/board_ESP32_DevKit-V1.yaml'
# - path: 'packages/board/board_ESP32_LilyGo-T-CAN485.yaml'
# - path: 'packages/board/board_ESP32_EVB.yaml'
# - path: 'packages/board/board_ESP32_Atom-Lite.yaml'
# - path: 'packages/board/board_ESP32_EVB.yaml'
# - path: 'packages/board/board_ESP32_LilyGo-T-CAN485.yaml'
# - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
# - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
# - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
# - path: 'packages/board/board_ESP32-S3_DevKitC-1_LED-38.yaml'
# - path: 'packages/board/board_ESP32-S3_DevKitC-1_LED-48.yaml'
# - path: 'packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml'
# - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
# - path: 'packages/board/board_ESP32-S3_Touch-LCD-4.3.yaml'
# - path: 'packages/board/board_ESP32-S3_Touch-LCD-7.yaml'
# - path: 'packages/board/board_ESP32-S3_XIAO.yaml'
# - path: 'packages/board/board_ESP32-S3_YBoard.yaml'
# - path: 'packages/board/board_ESP32-S3_AtomS3.yaml'
# vars:
@@ -155,6 +159,17 @@ packages:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
# LilyGo T-Connect Pro
# Importing the display also activates PSRAM.
# Also note that the display update takes about 120 ms, as indicated in the logs:
# "Component display took a long time for an operation (124 ms)."
# Board
# - path: 'packages/board/board_ESP32-S3_LilyGo-T-Connect-Pro.yaml'
# Display
# - path: 'packages/board/board_options_display_480x222.yaml'
# vars:
# display_auto_next_page_interval: '5s'
########### >>> UNCOMMENT YOUR BOARD OPTIONS <<< ###########
board_options:
@@ -175,7 +190,7 @@ packages:
- path: 'packages/board/board_options_itf_canbus_esp32_can.yaml'
vars:
canbus_node_id: 'canbus_inverter_1'
# MCP2515
# - path: 'packages/board/board_options_itf_canbus_mcp2515.yaml'
# vars:
+303
View File
@@ -0,0 +1,303 @@
# Updated : 2025.06.26
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
######################## YamBMS Remote Packages Version ########################
# You can compile this YAML directly without the `packages` folder.
# The packages will be automatically downloaded from GitHub.
# Don't forget to configure your WiFi credentials in the secrets.yaml
################################################################################
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: INFO # VERBOSE / DEBUG / INFO / WARN
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
# web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | Global Settings |
# +--------------------------------------+
substitutions:
# Name
friendly_name : 'YamBMS' # Prefix added in front of the `entity display name`, also used to classify them.
hostname: 'yambms' # Name of your ESPHome node registered on the IP network (DNS name, must be unique) and prefix added in front of the `entity id`.
name: '' # This name can be added as a second prefix, both for the `entity display name` and the `entity id`, you can leave it blank.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_id: 'yambms1'
yambms_name: 'YamBMS 1'
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# +--------------------------------------+
# | Shunt Settings |
# +--------------------------------------+
shunt_update_interval: '3s' # frequency at which Shunt data is refreshed
shunt_combine_interval: '1s' # frequency at which Shunt data is combined in YamBMS
# +--------------------------------------+
# | BMS Settings |
# +--------------------------------------+
bms_update_interval: '3s' # frequency at which BMS data is refreshed, going below '3s' can cause problems
bms_combine_interval: '1s' # frequency at which BMS data is combined in YamBMS
bms_cutoff_timer: '50s' # time during which the end of charge conditions must be respected (cut-off + cells not equalizing)
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
packages:
################ >>> CONFIG & CUSTOM LP <<< ################
# Local Packages intended for creating custom codes
# or sharing settings between several main.yaml
# yambms_config: !include yambms_config.yaml
# yambms_custom: !include yambms_custom.yaml
############### >>> UNCOMMENT YOUR BOARD <<< ###############
############### >>> ONLY ONE BOARD ! <<< ###############
board:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: 'packages/board/board_ESP32_Generic.yaml'
# - path: 'packages/board/board_ESP32_DevKit-V1.yaml'
# - path: 'packages/board/board_ESP32_Atom-Lite.yaml'
# - path: 'packages/board/board_ESP32_EVB.yaml'
# - path: 'packages/board/board_ESP32_LilyGo-T-CAN485.yaml'
# - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
# - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
# - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
# - path: 'packages/board/board_ESP32-S3_DevKitC-1_LED-38.yaml'
# - path: 'packages/board/board_ESP32-S3_DevKitC-1_LED-48.yaml'
# - path: 'packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml'
# - path: 'packages/board/board_ESP32-S3_Touch-LCD-4.3.yaml'
# - path: 'packages/board/board_ESP32-S3_Touch-LCD-7.yaml'
# - path: 'packages/board/board_ESP32-S3_XIAO.yaml'
# - path: 'packages/board/board_ESP32-S3_YBoard.yaml'
# - path: 'packages/board/board_ESP32-S3_AtomS3.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
# - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
# LilyGo T-Connect Pro
# Importing the display also activates PSRAM.
# Also note that the display update takes about 120 ms, as indicated in the logs:
# "Component display took a long time for an operation (124 ms)."
# Board
# - path: 'packages/board/board_ESP32-S3_LilyGo-T-Connect-Pro.yaml'
# Display
# - path: 'packages/board/board_options_display_480x222.yaml'
# vars:
# display_auto_next_page_interval: '5s'
########### >>> UNCOMMENT YOUR BOARD OPTIONS <<< ###########
board_options:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
# UART 1
- path: 'packages/board/board_options_itf_uart_esp_1.yaml'
# UART 2
# - path: 'packages/board/board_options_itf_uart_esp_2.yaml'
# UART 3
# - path: 'packages/board/board_options_itf_uart_esp_3.yaml'
# ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit)
- path: 'packages/board/board_options_itf_canbus_esp32_can.yaml'
vars:
canbus_node_id: 'canbus_inverter_1'
# MCP2515
# - path: 'packages/board/board_options_itf_canbus_mcp2515.yaml'
# vars:
# canbus_node_id: 'canbus_inverter_1'
############################################################
# You don't have to import a shunt but you must import at least one BMS.
# UART Shunt
# shunt:
# url: https://github.com/Sleeper85/esphome-yambms
# ref: main
# refresh: 0s
# files:
# # Shunt 1
# - path: 'packages/shunt/shunt_combine_Victron_SmartShunt_UART.yaml' # shunt_combine_Junctek_KHF_UART.yaml
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_uart_id: 'uart_esp_3'
# BLE Shunt
# shunt:
# url: https://github.com/Sleeper85/esphome-yambms
# ref: main
# refresh: 0s
# files:
# # Shunt 1
# - path: 'packages/shunt/shunt_combine_Victron_SmartShunt_BLE.yaml'
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_mac_address: '60:A4:23:91:8F:55' # Your MAC address
# shunt_encryption_key: '0df4d0395b7d1a876c0c33ecb9e70dcd' # Your encryption key
bms:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
# BMS 1
- path: 'packages/bms/bms_combine_JBD_UART_full.yaml'
vars:
bms_id: '1' # must be a number
bms_name: 'BMS 1'
bms_uart_id: 'uart_esp_1'
bms_rx_timeout: '150ms'
# Required settings cannot be retrieved from BMS
# These values ​​must match your BMS settings
# LFP values example
bms_max_charge_current: '100' # A. Used to calculate maximum charge current
bms_max_discharge_current: '100' # A. Used to calculate maximum discharge current
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
# BMS 2
- path: 'packages/bms/bms_combine_JBD_BLE_full.yaml'
vars:
bms_id: '2' # must be a number
bms_name: 'BMS 2'
bms_ble_mac_address: 'C8:47:8C:10:7E:AA' # Your MAC address
# Required settings cannot be retrieved from BMS
# These values ​​must match your BMS settings
# LFP values example
bms_max_charge_current: '100' # A. Used to calculate maximum charge current
bms_max_discharge_current: '100' # A. Used to calculate maximum discharge current
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
yambms:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: 'packages/yambms/yambms.yaml'
canbus:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: 'packages/yambms/yambms_canbus.yaml'
vars:
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_inverter_1'
canbus_light_id: 'esp_light'
# The CANBUS link will be considered down if no response from the inverter (0x305 frame) for 5s
# The Deye inverter sends the ACK 0x305 only when it receives the 0x356 frame.
canbus_link_timer: '5s'
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |
# +--------------------------------------+
debug:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: packages/base/device_debug_ESP32.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'
+40 -10
View File
@@ -1,5 +1,5 @@
# Updated : 2025.05.13
# Version : 1.5.5
# Updated : 2025.06.26
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -39,7 +39,7 @@ logger:
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
@@ -67,9 +67,9 @@ api:
# +--------------------------------------+
substitutions:
# Name
name: '' # Name that can be added as a second prefix after the friendly name, you can leave it blank.
hostname: 'yambms' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS' # Prefix added in front of all entity names and also to classify them.
friendly_name : 'YamBMS' # Prefix added in front of the `entity display name`, also used to classify them.
hostname: 'yambms' # Name of your ESPHome node registered on the IP network (DNS name, must be unique) and prefix added in front of the `entity id`.
name: '' # This name can be added as a second prefix, both for the `entity display name` and the `entity id`, you can leave it blank.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
@@ -135,15 +135,19 @@ packages:
files:
# - path: 'packages/board/board_ESP32_Generic.yaml'
# - path: 'packages/board/board_ESP32_DevKit-V1.yaml'
# - path: 'packages/board/board_ESP32_LilyGo-T-CAN485.yaml'
# - path: 'packages/board/board_ESP32_EVB.yaml'
# - path: 'packages/board/board_ESP32_Atom-Lite.yaml'
# - path: 'packages/board/board_ESP32_EVB.yaml'
# - path: 'packages/board/board_ESP32_LilyGo-T-CAN485.yaml'
# - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
# - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
# - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
# - path: 'packages/board/board_ESP32-S3_DevKitC-1_LED-38.yaml'
# - path: 'packages/board/board_ESP32-S3_DevKitC-1_LED-48.yaml'
- path: 'packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml'
# - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
# - path: 'packages/board/board_ESP32-S3_Touch-LCD-4.3.yaml'
# - path: 'packages/board/board_ESP32-S3_Touch-LCD-7.yaml'
# - path: 'packages/board/board_ESP32-S3_XIAO.yaml'
# - path: 'packages/board/board_ESP32-S3_YBoard.yaml'
# - path: 'packages/board/board_ESP32-S3_AtomS3.yaml'
# vars:
@@ -155,6 +159,17 @@ packages:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
# LilyGo T-Connect Pro
# Importing the display also activates PSRAM.
# Also note that the display update takes about 120 ms, as indicated in the logs:
# "Component display took a long time for an operation (124 ms)."
# Board
# - path: 'packages/board/board_ESP32-S3_LilyGo-T-Connect-Pro.yaml'
# Display
# - path: 'packages/board/board_options_display_480x222.yaml'
# vars:
# display_auto_next_page_interval: '5s'
########### >>> UNCOMMENT YOUR BOARD OPTIONS <<< ###########
board_options:
@@ -173,7 +188,7 @@ packages:
- path: 'packages/board/board_options_itf_canbus_esp32_can.yaml'
vars:
canbus_node_id: 'canbus_inverter_1'
# MCP2515
# - path: 'packages/board/board_options_itf_canbus_mcp2515.yaml'
# vars:
@@ -183,6 +198,7 @@ packages:
# You don't have to import a shunt but you must import at least one BMS.
# UART Shunt
# shunt:
# url: https://github.com/Sleeper85/esphome-yambms
# ref: main
@@ -195,6 +211,20 @@ packages:
# shunt_name: 'Shunt 1'
# shunt_uart_id: 'uart_esp_3'
# BLE Shunt
# shunt:
# url: https://github.com/Sleeper85/esphome-yambms
# ref: main
# refresh: 0s
# files:
# # Shunt 1
# - path: 'packages/shunt/shunt_combine_Victron_SmartShunt_BLE.yaml'
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_mac_address: '60:A4:23:91:8F:55' # Your MAC address
# shunt_encryption_key: '0df4d0395b7d1a876c0c33ecb9e70dcd' # Your encryption key
bms:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
+286
View File
@@ -0,0 +1,286 @@
# Updated : 2025.06.26
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
######################## YamBMS Remote Packages Version ########################
# You can compile this YAML directly without the `packages` folder.
# The packages will be automatically downloaded from GitHub.
# Don't forget to configure your WiFi credentials in the secrets.yaml
################################################################################
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: INFO # VERBOSE / DEBUG / INFO / WARN
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
# web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | Global Settings |
# +--------------------------------------+
substitutions:
# Name
friendly_name : 'YamBMS' # Prefix added in front of the `entity display name`, also used to classify them.
hostname: 'yambms' # Name of your ESPHome node registered on the IP network (DNS name, must be unique) and prefix added in front of the `entity id`.
name: '' # This name can be added as a second prefix, both for the `entity display name` and the `entity id`, you can leave it blank.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_id: 'yambms1'
yambms_name: 'YamBMS 1'
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# +--------------------------------------+
# | Shunt Settings |
# +--------------------------------------+
shunt_update_interval: '3s' # frequency at which Shunt data is refreshed
shunt_combine_interval: '1s' # frequency at which Shunt data is combined in YamBMS
# +--------------------------------------+
# | BMS Settings |
# +--------------------------------------+
bms_update_interval: '3s' # frequency at which BMS data is refreshed, going below '3s' can cause problems
bms_combine_interval: '1s' # frequency at which BMS data is combined in YamBMS
bms_cutoff_timer: '50s' # time during which the end of charge conditions must be respected (cut-off + cells not equalizing)
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
packages:
################ >>> CONFIG & CUSTOM LP <<< ################
# Local Packages intended for creating custom codes
# or sharing settings between several main.yaml
# yambms_config: !include yambms_config.yaml
# yambms_custom: !include yambms_custom.yaml
############### >>> UNCOMMENT YOUR BOARD <<< ###############
############### >>> ONLY ONE BOARD ! <<< ###############
board:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: 'packages/board/board_ESP32_Generic.yaml'
# - path: 'packages/board/board_ESP32_DevKit-V1.yaml'
# - path: 'packages/board/board_ESP32_Atom-Lite.yaml'
# - path: 'packages/board/board_ESP32_EVB.yaml'
# - path: 'packages/board/board_ESP32_LilyGo-T-CAN485.yaml'
# - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
# - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
# - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
# - path: 'packages/board/board_ESP32-S3_DevKitC-1_LED-38.yaml'
# - path: 'packages/board/board_ESP32-S3_DevKitC-1_LED-48.yaml'
# - path: 'packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml'
# - path: 'packages/board/board_ESP32-S3_Touch-LCD-4.3.yaml'
# - path: 'packages/board/board_ESP32-S3_Touch-LCD-7.yaml'
# - path: 'packages/board/board_ESP32-S3_XIAO.yaml'
# - path: 'packages/board/board_ESP32-S3_YBoard.yaml'
# - path: 'packages/board/board_ESP32-S3_AtomS3.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
# - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
# LilyGo T-Connect Pro
# Importing the display also activates PSRAM.
# Also note that the display update takes about 120 ms, as indicated in the logs:
# "Component display took a long time for an operation (124 ms)."
# Board
# - path: 'packages/board/board_ESP32-S3_LilyGo-T-Connect-Pro.yaml'
# Display
# - path: 'packages/board/board_options_display_480x222.yaml'
# vars:
# display_auto_next_page_interval: '5s'
########### >>> UNCOMMENT YOUR BOARD OPTIONS <<< ###########
board_options:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
# UART 1
- path: 'packages/board/board_options_itf_uart_esp_1.yaml'
# UART 2
- path: 'packages/board/board_options_itf_uart_esp_2.yaml'
# UART 3
# - path: 'packages/board/board_options_itf_uart_esp_3.yaml'
# ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit)
- path: 'packages/board/board_options_itf_canbus_esp32_can.yaml'
vars:
canbus_node_id: 'canbus_inverter_1'
# MCP2515
# - path: 'packages/board/board_options_itf_canbus_mcp2515.yaml'
# vars:
# canbus_node_id: 'canbus_inverter_1'
############################################################
# You don't have to import a shunt but you must import at least one BMS.
# UART Shunt
# shunt:
# url: https://github.com/Sleeper85/esphome-yambms
# ref: main
# refresh: 0s
# files:
# # Shunt 1
# - path: 'packages/shunt/shunt_combine_Victron_SmartShunt_UART.yaml' # shunt_combine_Junctek_KHF_UART.yaml
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_uart_id: 'uart_esp_3'
# BLE Shunt
# shunt:
# url: https://github.com/Sleeper85/esphome-yambms
# ref: main
# refresh: 0s
# files:
# # Shunt 1
# - path: 'packages/shunt/shunt_combine_Victron_SmartShunt_BLE.yaml'
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_mac_address: '60:A4:23:91:8F:55' # Your MAC address
# shunt_encryption_key: '0df4d0395b7d1a876c0c33ecb9e70dcd' # Your encryption key
bms:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
# BMS 1
- path: 'packages/bms/bms_combine_JK_UART_4G-GPS_full.yaml'
vars:
bms_id: '1' # must be a number
bms_name: 'JK-BMS 1'
bms_uart_id: 'uart_esp_1'
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
# BMS 2
- path: 'packages/bms/bms_combine_JK_UART_4G-GPS_full.yaml'
vars:
bms_id: '2' # must be a number
bms_name: 'JK-BMS 2'
bms_uart_id: 'uart_esp_2'
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
yambms:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: 'packages/yambms/yambms.yaml'
canbus:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: 'packages/yambms/yambms_canbus.yaml'
vars:
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_inverter_1'
canbus_light_id: 'esp_light'
# The CANBUS link will be considered down if no response from the inverter (0x305 frame) for 5s
# The Deye inverter sends the ACK 0x305 only when it receives the 0x356 frame.
canbus_link_timer: '5s'
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |
# +--------------------------------------+
debug:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: packages/base/device_debug_ESP32.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'
+40 -10
View File
@@ -1,5 +1,5 @@
# Updated : 2025.05.13
# Version : 1.5.5
# Updated : 2025.06.26
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -39,7 +39,7 @@ logger:
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
@@ -67,9 +67,9 @@ api:
# +--------------------------------------+
substitutions:
# Name
name: '' # Name that can be added as a second prefix after the friendly name, you can leave it blank.
hostname: 'yambms' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS' # Prefix added in front of all entity names and also to classify them.
friendly_name : 'YamBMS' # Prefix added in front of the `entity display name`, also used to classify them.
hostname: 'yambms' # Name of your ESPHome node registered on the IP network (DNS name, must be unique) and prefix added in front of the `entity id`.
name: '' # This name can be added as a second prefix, both for the `entity display name` and the `entity id`, you can leave it blank.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
@@ -135,15 +135,19 @@ packages:
files:
# - path: 'packages/board/board_ESP32_Generic.yaml'
# - path: 'packages/board/board_ESP32_DevKit-V1.yaml'
# - path: 'packages/board/board_ESP32_LilyGo-T-CAN485.yaml'
# - path: 'packages/board/board_ESP32_EVB.yaml'
# - path: 'packages/board/board_ESP32_Atom-Lite.yaml'
# - path: 'packages/board/board_ESP32_EVB.yaml'
# - path: 'packages/board/board_ESP32_LilyGo-T-CAN485.yaml'
# - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
# - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
# - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
# - path: 'packages/board/board_ESP32-S3_DevKitC-1_LED-38.yaml'
# - path: 'packages/board/board_ESP32-S3_DevKitC-1_LED-48.yaml'
- path: 'packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml'
# - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
# - path: 'packages/board/board_ESP32-S3_Touch-LCD-4.3.yaml'
# - path: 'packages/board/board_ESP32-S3_Touch-LCD-7.yaml'
# - path: 'packages/board/board_ESP32-S3_XIAO.yaml'
# - path: 'packages/board/board_ESP32-S3_YBoard.yaml'
# - path: 'packages/board/board_ESP32-S3_AtomS3.yaml'
# vars:
@@ -155,6 +159,17 @@ packages:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
# LilyGo T-Connect Pro
# Importing the display also activates PSRAM.
# Also note that the display update takes about 120 ms, as indicated in the logs:
# "Component display took a long time for an operation (124 ms)."
# Board
# - path: 'packages/board/board_ESP32-S3_LilyGo-T-Connect-Pro.yaml'
# Display
# - path: 'packages/board/board_options_display_480x222.yaml'
# vars:
# display_auto_next_page_interval: '5s'
########### >>> UNCOMMENT YOUR BOARD OPTIONS <<< ###########
board_options:
@@ -173,7 +188,7 @@ packages:
- path: 'packages/board/board_options_itf_canbus_esp32_can.yaml'
vars:
canbus_node_id: 'canbus_inverter_1'
# MCP2515
# - path: 'packages/board/board_options_itf_canbus_mcp2515.yaml'
# vars:
@@ -183,6 +198,7 @@ packages:
# You don't have to import a shunt but you must import at least one BMS.
# UART Shunt
# shunt:
# url: https://github.com/Sleeper85/esphome-yambms
# ref: main
@@ -195,6 +211,20 @@ packages:
# shunt_name: 'Shunt 1'
# shunt_uart_id: 'uart_esp_3'
# BLE Shunt
# shunt:
# url: https://github.com/Sleeper85/esphome-yambms
# ref: main
# refresh: 0s
# files:
# # Shunt 1
# - path: 'packages/shunt/shunt_combine_Victron_SmartShunt_BLE.yaml'
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_mac_address: '60:A4:23:91:8F:55' # Your MAC address
# shunt_encryption_key: '0df4d0395b7d1a876c0c33ecb9e70dcd' # Your encryption key
bms:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
+302
View File
@@ -0,0 +1,302 @@
# Updated : 2025.06.26
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
######################## YamBMS Remote Packages Version ########################
# You can compile this YAML directly without the `packages` folder.
# The packages will be automatically downloaded from GitHub.
# Don't forget to configure your WiFi credentials in the secrets.yaml
################################################################################
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: INFO # VERBOSE / DEBUG / INFO / WARN
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
# web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | Global Settings |
# +--------------------------------------+
substitutions:
# Name
friendly_name : 'YamBMS' # Prefix added in front of the `entity display name`, also used to classify them.
hostname: 'yambms' # Name of your ESPHome node registered on the IP network (DNS name, must be unique) and prefix added in front of the `entity id`.
name: '' # This name can be added as a second prefix, both for the `entity display name` and the `entity id`, you can leave it blank.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_id: 'yambms1'
yambms_name: 'YamBMS 1'
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# +--------------------------------------+
# | Shunt Settings |
# +--------------------------------------+
shunt_update_interval: '3s' # frequency at which Shunt data is refreshed
shunt_combine_interval: '1s' # frequency at which Shunt data is combined in YamBMS
# +--------------------------------------+
# | BMS Settings |
# +--------------------------------------+
bms_update_interval: '3s' # frequency at which BMS data is refreshed, going below '3s' can cause problems
bms_combine_interval: '1s' # frequency at which BMS data is combined in YamBMS
bms_cutoff_timer: '50s' # time during which the end of charge conditions must be respected (cut-off + cells not equalizing)
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
packages:
################ >>> CONFIG & CUSTOM LP <<< ################
# Local Packages intended for creating custom codes
# or sharing settings between several main.yaml
# yambms_config: !include yambms_config.yaml
# yambms_custom: !include yambms_custom.yaml
############### >>> UNCOMMENT YOUR BOARD <<< ###############
############### >>> ONLY ONE BOARD ! <<< ###############
board:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: 'packages/board/board_ESP32_Generic.yaml'
# - path: 'packages/board/board_ESP32_DevKit-V1.yaml'
# - path: 'packages/board/board_ESP32_Atom-Lite.yaml'
# - path: 'packages/board/board_ESP32_EVB.yaml'
# - path: 'packages/board/board_ESP32_LilyGo-T-CAN485.yaml'
# - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
# - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
# - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
# - path: 'packages/board/board_ESP32-S3_DevKitC-1_LED-38.yaml'
# - path: 'packages/board/board_ESP32-S3_DevKitC-1_LED-48.yaml'
# - path: 'packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml'
# - path: 'packages/board/board_ESP32-S3_Touch-LCD-4.3.yaml'
# - path: 'packages/board/board_ESP32-S3_Touch-LCD-7.yaml'
# - path: 'packages/board/board_ESP32-S3_XIAO.yaml'
# - path: 'packages/board/board_ESP32-S3_YBoard.yaml'
# - path: 'packages/board/board_ESP32-S3_AtomS3.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
# - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
# LilyGo T-Connect Pro
# Importing the display also activates PSRAM.
# Also note that the display update takes about 120 ms, as indicated in the logs:
# "Component display took a long time for an operation (124 ms)."
# Board
# - path: 'packages/board/board_ESP32-S3_LilyGo-T-Connect-Pro.yaml'
# Display
# - path: 'packages/board/board_options_display_480x222.yaml'
# vars:
# display_auto_next_page_interval: '5s'
########### >>> UNCOMMENT YOUR BOARD OPTIONS <<< ###########
board_options:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
# UART 1
# - path: 'packages/board/board_options_itf_uart_esp_1.yaml'
# UART 2
# - path: 'packages/board/board_options_itf_uart_esp_2.yaml'
# UART 3
# - path: 'packages/board/board_options_itf_uart_esp_3.yaml'
# ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit)
- path: 'packages/board/board_options_itf_canbus_esp32_can.yaml'
vars:
canbus_node_id: 'canbus_inverter_1'
# MCP2515
# - path: 'packages/board/board_options_itf_canbus_mcp2515.yaml'
# vars:
# canbus_node_id: 'canbus_inverter_1'
############################################################
# You don't have to import a shunt but you must import at least one BMS.
# UART Shunt
# shunt:
# url: https://github.com/Sleeper85/esphome-yambms
# ref: main
# refresh: 0s
# files:
# # Shunt 1
# - path: 'packages/shunt/shunt_combine_Victron_SmartShunt_UART.yaml' # shunt_combine_Junctek_KHF_UART.yaml
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_uart_id: 'uart_esp_1'
# BLE Shunt
# shunt:
# url: https://github.com/Sleeper85/esphome-yambms
# ref: main
# refresh: 0s
# files:
# # Shunt 1
# - path: 'packages/shunt/shunt_combine_Victron_SmartShunt_BLE.yaml'
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_mac_address: '60:A4:23:91:8F:55' # Your MAC address
# shunt_encryption_key: '0df4d0395b7d1a876c0c33ecb9e70dcd' # Your encryption key
bms:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
# BMS 1
- path: 'packages/bms/bms_combine_JK_BLE_standard.yaml'
vars:
bms_id: '1' # must be a number
bms_name: 'JK-BMS 1'
bms_ble_protocol_version: 'JK02_32S' # JK02_24S < hardware version 11.0 >= JK02_32S
bms_ble_mac_address: 'C8:47:8C:10:7E:AA'
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
# BMS 2
- path: 'packages/bms/bms_combine_JK_BLE_standard.yaml'
vars:
bms_id: '2' # must be a number
bms_name: 'JK-BMS 2'
bms_ble_protocol_version: 'JK02_32S' # JK02_24S < hardware version 11.0 >= JK02_32S
bms_ble_mac_address: 'C8:47:8C:EE:16:EA'
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
# bms_options:
# url: https://github.com/Sleeper85/esphome-yambms
# ref: main
# refresh: 0s
# files:
# # BMS 1
# - path: 'packages/bms/bms_options_charging_logic.yaml'
# vars:
# bms_id: '1' # must be a number
# # BMS 2
# - path: 'packages/bms/bms_options_charging_logic.yaml'
# vars:
# bms_id: '2' # must be a number
yambms:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: 'packages/yambms/yambms.yaml'
canbus:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: 'packages/yambms/yambms_canbus.yaml'
vars:
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_inverter_1'
canbus_light_id: 'esp_light'
# The CANBUS link will be considered down if no response from the inverter (0x305 frame) for 5s
# The Deye inverter sends the ACK 0x305 only when it receives the 0x356 frame.
canbus_link_timer: '5s'
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |
# +--------------------------------------+
debug:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: packages/base/device_debug_ESP32.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'
+20 -20
View File
@@ -1,5 +1,5 @@
# Updated : 2025.05.13
# Version : 1.5.5
# Updated : 2025.06.26
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -39,7 +39,7 @@ logger:
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
@@ -67,9 +67,9 @@ api:
# +--------------------------------------+
substitutions:
# Name
name: '' # Name that can be added as a second prefix after the friendly name, you can leave it blank.
hostname: 'pvbrain2' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS' # Prefix added in front of all entity names and also to classify them.
friendly_name : 'YamBMS' # Prefix added in front of the `entity display name`, also used to classify them.
hostname: 'pvbrain2' # Name of your ESPHome node registered on the IP network (DNS name, must be unique) and prefix added in front of the `entity id`.
name: '' # This name can be added as a second prefix, both for the `entity display name` and the `entity id`, you can leave it blank.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
@@ -111,14 +111,14 @@ substitutions:
# +--------------------------------------+
# | WK2168 UART expander |
# +--------------------------------------+
uart0_baudrate: '2400' #WKS {RJ45-UART0}
uart0_baudrate: '2400' #WKS {RJ45-UART0}
uart1_baudrate: '38400' #JSY193
uart2_baudrate: '19200' #SmartShunt
uart3_baudrate: '9600' #SRNE {RJ45-UART3}
uart3_baudrate: '9600' #SRNE {RJ45-UART3}
uart4_baudrate: '115200' #JK-BMS 1
uart5_baudrate: '115200' #JK-BMS 2
uart6_baudrate: '115200' #Pylontech
uart7_baudrate: '9600' #EPEVER {RJ45-UART7}
uart7_baudrate: '9600' #EPEVER {RJ45-UART7}
# +--------------------------------------+
# | PVbrain2 packages |
@@ -161,17 +161,17 @@ packages:
# You don't have to import a shunt but you must import at least one BMS.
shunt:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
# Shunt 1
- path: 'packages/shunt/shunt_combine_Victron_SmartShunt_UART_expander.yaml' # shunt_combine_Junctek_KHF_UART.yaml
vars:
shunt_id: '1' # must be a number
shunt_name: 'Shunt 1'
shunt_uart_id: 'uart_${uart_hub_bus}_2'
# shunt:
# url: https://github.com/Sleeper85/esphome-yambms
# ref: main
# refresh: 0s
# files:
# # Shunt 1
# - path: 'packages/shunt/shunt_combine_Victron_SmartShunt_UART_expander.yaml' # shunt_combine_Junctek_KHF_UART.yaml
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_uart_id: 'uart_${uart_hub_bus}_2'
bms:
url: https://github.com/Sleeper85/esphome-yambms
+312
View File
@@ -0,0 +1,312 @@
# Updated : 2025.06.26
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
######################## YamBMS Remote Packages Version ########################
# You can compile this YAML directly without the `packages` folder.
# The packages will be automatically downloaded from GitHub.
# Don't forget to configure your WiFi credentials in the secrets.yaml
################################################################################
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: INFO # VERBOSE / DEBUG / INFO / WARN
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
# web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | Global Settings |
# +--------------------------------------+
substitutions:
# Name
friendly_name : 'YamBMS' # Prefix added in front of the `entity display name`, also used to classify them.
hostname: 'yambms' # Name of your ESPHome node registered on the IP network (DNS name, must be unique) and prefix added in front of the `entity id`.
name: '' # This name can be added as a second prefix, both for the `entity display name` and the `entity id`, you can leave it blank.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_id: 'yambms1'
yambms_name: 'YamBMS 1'
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# +--------------------------------------+
# | Shunt Settings |
# +--------------------------------------+
shunt_update_interval: '3s' # frequency at which Shunt data is refreshed
shunt_combine_interval: '1s' # frequency at which Shunt data is combined in YamBMS
# +--------------------------------------+
# | BMS Settings |
# +--------------------------------------+
bms_update_interval: '3s' # frequency at which BMS data is refreshed, going below '3s' can cause problems
bms_combine_interval: '1s' # frequency at which BMS data is combined in YamBMS
bms_cutoff_timer: '50s' # time during which the end of charge conditions must be respected (cut-off + cells not equalizing)
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
packages:
################ >>> CONFIG & CUSTOM LP <<< ################
# Local Packages intended for creating custom codes
# or sharing settings between several main.yaml
# yambms_config: !include yambms_config.yaml
# yambms_custom: !include yambms_custom.yaml
############### >>> UNCOMMENT YOUR BOARD <<< ###############
############### >>> ONLY ONE BOARD ! <<< ###############
board:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: 'packages/board/board_ESP32_Generic.yaml'
# - path: 'packages/board/board_ESP32_DevKit-V1.yaml'
# - path: 'packages/board/board_ESP32_Atom-Lite.yaml'
# - path: 'packages/board/board_ESP32_EVB.yaml'
# - path: 'packages/board/board_ESP32_LilyGo-T-CAN485.yaml'
# - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
# - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
# - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
# - path: 'packages/board/board_ESP32-S3_DevKitC-1_LED-38.yaml'
# - path: 'packages/board/board_ESP32-S3_DevKitC-1_LED-48.yaml'
# - path: 'packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml'
# - path: 'packages/board/board_ESP32-S3_Touch-LCD-4.3.yaml'
# - path: 'packages/board/board_ESP32-S3_Touch-LCD-7.yaml'
# - path: 'packages/board/board_ESP32-S3_XIAO.yaml'
# - path: 'packages/board/board_ESP32-S3_YBoard.yaml'
# - path: 'packages/board/board_ESP32-S3_AtomS3.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
# - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
# LilyGo T-Connect Pro
# Importing the display also activates PSRAM.
# Also note that the display update takes about 120 ms, as indicated in the logs:
# "Component display took a long time for an operation (124 ms)."
# Board
# - path: 'packages/board/board_ESP32-S3_LilyGo-T-Connect-Pro.yaml'
# Display
# - path: 'packages/board/board_options_display_480x222.yaml'
# vars:
# display_auto_next_page_interval: '5s'
########### >>> UNCOMMENT YOUR BOARD OPTIONS <<< ###########
board_options:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
# UART 1
- path: 'packages/board/board_options_itf_uart_esp_1.yaml'
# UART 2
# - path: 'packages/board/board_options_itf_uart_esp_2.yaml'
# UART 3
# - path: 'packages/board/board_options_itf_uart_esp_3.yaml'
# ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit)
- path: 'packages/board/board_options_itf_canbus_esp32_can.yaml'
vars:
canbus_node_id: 'canbus_inverter_1'
# MCP2515
# - path: 'packages/board/board_options_itf_canbus_mcp2515.yaml'
# vars:
# canbus_node_id: 'canbus_inverter_1'
############################################################
# You don't have to import a shunt but you must import at least one BMS.
# UART Shunt
# shunt:
# url: https://github.com/Sleeper85/esphome-yambms
# ref: main
# refresh: 0s
# files:
# # Shunt 1
# - path: 'packages/shunt/shunt_combine_Victron_SmartShunt_UART.yaml' # shunt_combine_Junctek_KHF_UART.yaml
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_uart_id: 'uart_esp_3'
# BLE Shunt
# shunt:
# url: https://github.com/Sleeper85/esphome-yambms
# ref: main
# refresh: 0s
# files:
# # Shunt 1
# - path: 'packages/shunt/shunt_combine_Victron_SmartShunt_BLE.yaml'
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_mac_address: '60:A4:23:91:8F:55' # Your MAC address
# shunt_encryption_key: '0df4d0395b7d1a876c0c33ecb9e70dcd' # Your encryption key
bms:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
# Seplos Modbus 1
- path: 'packages/bms/bms_combine_SEPLOS_V1_V2_RS485_modbus.yaml'
vars:
seplos_modbus_id: 'seplos_modbus1'
seplos_modbus_uart_id: 'uart_esp_1'
seplos_modbus_baud_rate: '9600' # 9600 / 19200 ; please set the baudrate of your Seplos BMS model here
seplos_modbus_rx_timeout: '150ms'
# BMS 1
- path: 'packages/bms/bms_combine_SEPLOS_V1_V2_RS485_bms_full.yaml'
vars:
# Seplos modbus ID
seplos_modbus_id: 'seplos_modbus1'
# BMS vars
bms_id: '1' # must be a number
bms_name: 'BMS 1'
bms_address: '0x01' # BMS 1 DIP switch
bms_protocol_version: '0x20' # Known protocol versions: 0x20 (Seplos), 0x26 (Boqiang)
# Required settings cannot be retrieved from BMS
# These values ​​must match your BMS settings
# LFP values example
bms_max_charge_current: '100' # A. Used to calculate maximum charge current
bms_max_discharge_current: '100' # A. Used to calculate maximum discharge current
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
# BMS 2
- path: 'packages/bms/bms_combine_SEPLOS_V1_V2_RS485_bms_full.yaml'
vars:
# Seplos modbus ID
seplos_modbus_id: 'seplos_modbus1'
# BMS vars
bms_id: '2' # must be a number
bms_name: 'BMS 2'
bms_address: '0x02' # BMS 2 DIP switch
bms_protocol_version: '0x20' # Known protocol versions: 0x20 (Seplos), 0x26 (Boqiang)
bms_uart_id: uart_esp_2
# Required settings cannot be retrieved from BMS
# These values ​​must match your BMS settings
# LFP values example
bms_max_charge_current: '100' # A. Used to calculate maximum charge current
bms_max_discharge_current: '100' # A. Used to calculate maximum discharge current
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
yambms:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: 'packages/yambms/yambms.yaml'
canbus:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: 'packages/yambms/yambms_canbus.yaml'
vars:
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_inverter_1'
canbus_light_id: 'esp_light'
# The CANBUS link will be considered down if no response from the inverter (0x305 frame) for 5s
# The Deye inverter sends the ACK 0x305 only when it receives the 0x356 frame.
canbus_link_timer: '5s'
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |
# +--------------------------------------+
debug:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: packages/base/device_debug_ESP32.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'
+51 -21
View File
@@ -1,5 +1,5 @@
# Updated : 2025.05.13
# Version : 1.5.5
# Updated : 2025.06.26
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -39,7 +39,7 @@ logger:
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
@@ -67,9 +67,9 @@ api:
# +--------------------------------------+
substitutions:
# Name
name: '' # Name that can be added as a second prefix after the friendly name, you can leave it blank.
hostname: 'yambms' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS' # Prefix added in front of all entity names and also to classify them.
friendly_name : 'YamBMS' # Prefix added in front of the `entity display name`, also used to classify them.
hostname: 'yambms' # Name of your ESPHome node registered on the IP network (DNS name, must be unique) and prefix added in front of the `entity id`.
name: '' # This name can be added as a second prefix, both for the `entity display name` and the `entity id`, you can leave it blank.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
@@ -135,15 +135,19 @@ packages:
files:
- path: 'packages/board/board_ESP32_Generic.yaml'
# - path: 'packages/board/board_ESP32_DevKit-V1.yaml'
# - path: 'packages/board/board_ESP32_LilyGo-T-CAN485.yaml'
# - path: 'packages/board/board_ESP32_EVB.yaml'
# - path: 'packages/board/board_ESP32_Atom-Lite.yaml'
# - path: 'packages/board/board_ESP32_EVB.yaml'
# - path: 'packages/board/board_ESP32_LilyGo-T-CAN485.yaml'
# - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
# - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
# - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
# - path: 'packages/board/board_ESP32-S3_DevKitC-1_LED-38.yaml'
# - path: 'packages/board/board_ESP32-S3_DevKitC-1_LED-48.yaml'
# - path: 'packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml'
# - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
# - path: 'packages/board/board_ESP32-S3_Touch-LCD-4.3.yaml'
# - path: 'packages/board/board_ESP32-S3_Touch-LCD-7.yaml'
# - path: 'packages/board/board_ESP32-S3_XIAO.yaml'
# - path: 'packages/board/board_ESP32-S3_YBoard.yaml'
# - path: 'packages/board/board_ESP32-S3_AtomS3.yaml'
# vars:
@@ -155,6 +159,17 @@ packages:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
# LilyGo T-Connect Pro
# Importing the display also activates PSRAM.
# Also note that the display update takes about 120 ms, as indicated in the logs:
# "Component display took a long time for an operation (124 ms)."
# Board
# - path: 'packages/board/board_ESP32-S3_LilyGo-T-Connect-Pro.yaml'
# Display
# - path: 'packages/board/board_options_display_480x222.yaml'
# vars:
# display_auto_next_page_interval: '5s'
########### >>> UNCOMMENT YOUR BOARD OPTIONS <<< ###########
board_options:
@@ -173,7 +188,7 @@ packages:
- path: 'packages/board/board_options_itf_canbus_esp32_can.yaml'
vars:
canbus_node_id: 'canbus_inverter_1'
# MCP2515
# - path: 'packages/board/board_options_itf_canbus_mcp2515.yaml'
# vars:
@@ -183,17 +198,32 @@ packages:
# You don't have to import a shunt but you must import at least one BMS.
shunt:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
# Shunt 1
- path: 'packages/shunt/shunt_combine_Victron_SmartShunt_UART.yaml' # shunt_combine_Junctek_KHF_UART.yaml
vars:
shunt_id: '1' # must be a number
shunt_name: 'Shunt 1'
shunt_uart_id: 'uart_esp_3'
# UART Shunt
# shunt:
# url: https://github.com/Sleeper85/esphome-yambms
# ref: main
# refresh: 0s
# files:
# # Shunt 1
# - path: 'packages/shunt/shunt_combine_Victron_SmartShunt_UART.yaml' # shunt_combine_Junctek_KHF_UART.yaml
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_uart_id: 'uart_esp_3'
# BLE Shunt
# shunt:
# url: https://github.com/Sleeper85/esphome-yambms
# ref: main
# refresh: 0s
# files:
# # Shunt 1
# - path: 'packages/shunt/shunt_combine_Victron_SmartShunt_BLE.yaml'
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_mac_address: '60:A4:23:91:8F:55' # Your MAC address
# shunt_encryption_key: '0df4d0395b7d1a876c0c33ecb9e70dcd' # Your encryption key
bms:
url: https://github.com/Sleeper85/esphome-yambms
@@ -1,5 +1,5 @@
# Updated : 2025.04.01
# Version : 1.5.5
# Updated : 2025.06.10
# Version : 1.5.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -53,7 +53,7 @@ packages:
bms_id: '1' # must be a number
bms_name: 'JK-BMS 1'
bms_address: '0x01' # BMS 1 DIP switch
bms2: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
vars:
@@ -83,7 +83,7 @@ packages:
bms_id: '4' # must be a number
bms_name: 'JK-BMS 4'
bms_address: '0x04' # BMS 4 DIP switch
bms5: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
vars:
@@ -1,5 +1,5 @@
# Updated : 2025.04.01
# Version : 1.5.5
# Updated : 2025.06.10
# Version : 1.5.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -51,7 +51,7 @@ packages:
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
bms2: !include
file: packages/bms/bms_combine_SEPLOS_V1_V2_RS485_bms_full.yaml
vars:
@@ -1,5 +1,5 @@
# Updated : 2025.04.01
# Version : 1.5.5
# Updated : 2025.06.10
# Version : 1.5.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -25,7 +25,7 @@
substitutions:
modbus_update_interval: '5s' # frequency with which BMS/Shunt modbus servers are queried
modbus_baud_rate: '19200' # 9600 / 19200 / 11520
modbus_baud_rate: '19200' # 9600 / 19200 / 115200
modbus_command_throttle: '0ms' # minimum time in between 2 requests to the device
modbus_send_wait_time: '250ms' # time in milliseconds before the next ModBUS command is sent if an answer from a previous command is pending
@@ -66,7 +66,7 @@ packages:
# vars:
# bms_id: '4' # must be a number
# bms_name: 'BMS 4'
# bms5: !include
# file: packages/bms/bms_combine_modbus_client.yaml
# vars:
@@ -1,5 +1,5 @@
# Updated : 2025.04.01
# Version : 1.5.5
# Updated : 2025.06.10
# Version : 1.5.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -25,7 +25,7 @@
substitutions:
modbus_update_interval: '5s' # frequency with which BMS/Shunt modbus servers are queried
modbus_baud_rate: '19200' # 9600 / 19200 / 11520
modbus_baud_rate: '19200' # 9600 / 19200 / 115200
modbus_command_throttle: '0ms' # minimum time in between 2 requests to the device
modbus_send_wait_time: '250ms' # time in milliseconds before the next ModBUS command is sent if an answer from a previous command is pending
@@ -1,5 +1,5 @@
# Updated : 2025.04.01
# Version : 1.5.5
# Updated : 2025.06.10
# Version : 1.5.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -25,7 +25,7 @@
substitutions:
modbus_update_interval: '5s' # frequency with which BMS/Shunt modbus servers are queried
modbus_baud_rate: '19200' # 9600 / 19200 / 11520
modbus_baud_rate: '19200' # 9600 / 19200 / 115200
modbus_command_throttle: '0ms' # minimum time in between 2 requests to the device
modbus_send_wait_time: '250ms' # time in milliseconds before the next ModBUS command is sent if an answer from a previous command is pending
@@ -1,5 +1,5 @@
# Updated : 2025.04.01
# Version : 1.5.5
# Updated : 2025.06.10
# Version : 1.5.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -25,7 +25,7 @@
substitutions:
modbus_update_interval: '5s' # frequency with which BMS/Shunt modbus servers are queried
modbus_baud_rate: '19200' # 9600 / 19200 / 11520
modbus_baud_rate: '19200' # 9600 / 19200 / 115200
modbus_command_throttle: '0ms' # minimum time in between 2 requests to the device
modbus_send_wait_time: '250ms' # time in milliseconds before the next ModBUS command is sent if an answer from a previous command is pending
@@ -1,5 +1,5 @@
# Updated : 2025.04.01
# Version : 1.5.5
# Updated : 2025.06.10
# Version : 1.5.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -25,7 +25,7 @@
substitutions:
modbus_update_interval: '5s' # frequency with which BMS/Shunt modbus servers are queried
modbus_baud_rate: '19200' # 9600 / 19200 / 11520
modbus_baud_rate: '19200' # 9600 / 19200 / 115200
modbus_command_throttle: '0ms' # minimum time in between 2 requests to the device
modbus_send_wait_time: '250ms' # time in milliseconds before the next ModBUS command is sent if an answer from a previous command is pending
@@ -1,5 +1,5 @@
# Updated : 2025.04.01
# Version : 1.5.5
# Updated : 2025.06.10
# Version : 1.5.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -25,7 +25,7 @@
substitutions:
modbus_update_interval: '5s' # frequency with which BMS/Shunt modbus servers are queried
modbus_baud_rate: '19200' # 9600 / 19200 / 11520
modbus_baud_rate: '19200' # 9600 / 19200 / 115200
modbus_command_throttle: '0ms' # minimum time in between 2 requests to the device
modbus_send_wait_time: '250ms' # time in milliseconds before the next ModBUS command is sent if an answer from a previous command is pending
+1 -1
View File
@@ -23,7 +23,7 @@ The `GPS` port sometimes called `RS485` is not an `RS485` port but `3V3 UART-TTL
│ O O O O │
│GND RX TX VBAT│
└────────────────┘
│ │ │ └ VBAT is full battery volatge eg. 56V (possible to use it via an isolated DC-DC converter)
│ │ │ └ VBAT is full battery voltage eg. 56V (possible to use it via an isolated DC-DC converter)
│ │ └──── TX to TTL-isolator AI (input)
│ └──────── RX to TTL-isolator AO (output)
└──────────── GND to TTL-isolator GND
+15 -1
View File
@@ -21,7 +21,7 @@ Other configurations are possible, don't hesitate to communicate what works well
| Inverter | Battery mode | CAN protocol |
| --- | --- | --- |
| Deye | Lithium 00 | PYLON 1.2 |
| GoodWe | LX U5.4-L | PYLON + |
| GoodWe | LX U5.4-L | PYLON V2 |
| Sofar | Automatic | PYLON 1.2 |
| Growatt | CAN L52 | PYLON 1.2 |
| Solis | AoBo | SMA |
@@ -115,6 +115,20 @@ You can compare `Auto CCL` to a max speed limiter in a car.
Current control should work with any inverter that uses `CAN` control.
## Auto Float Voltage
When switching from `Bulk` to `Float`, therefore lowering the `Requested Charge Voltage (CVL)`, some inverters (e.g. Deye SUN-12K) will start to discharge the battery (into the grid) with up to max. discharge current until the
`Requested Charge Voltage (CVL)` is reached. The reason behind this is that the inverter sees this as battery overvoltage and wants to counter it.
As workaround, by enabling `Automatic Float Voltage`, it will lower the `Requested Charge Voltage (CVL)` gradually in small steps until the float voltage is reached, allowing the battery more time to settle down.
There are two modes available: `Follow` and `Immediately`.
- `Follow`: Waits until the battery voltage itself is below the current `Requested Charge Voltage (CVL)` before lowering `Requested Charge Voltage (CVL)` further. It follows the battery voltage until the target float voltage is reached.
- `Immediately`: Immediately start lowering the `Requested Charge Voltage (CVL)`, independent of the current battery voltage. That means it can go below the current battery voltage.
This feature might not work with all inverters as good or is not required if these do not discharge the battery.
The voltage steps can be configured (default `0.1V`) with `Auto Float Voltage Step`. The update interval can be configured (default `3 minutes`) with `Auto Float Update Interval`.
## Requested Values
![Image](../../images/YamBMS_Requested_Values.png "YamBMS_Requested_Values")
Binary file not shown.

After

Width:  |  Height:  |  Size: 3.9 MiB

+5 -15
View File
@@ -1,5 +1,5 @@
# Updated : 2025.05.11
# Version : 1.5.5
# Updated : 2025.06.12
# Version : 1.5.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -17,18 +17,8 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
substitutions:
yambms_version: "1.5.5"
esphome:
name: ${hostname}
friendly_name: ${friendly_name}
# comment: 'Solar system braining and more !'
# area: 'Technical local'
project:
name: Sleeper85.YamBMS
version: ${yambms_version}
min_version: 2025.3.0
packages:
device_base_esphome: !include device_base_esphome.yaml
time:
# https://esphome.io/components/time/homeassistant
@@ -43,7 +33,7 @@ button:
entity_category: config
binary_sensor:
# https://esphome.io/components/binary_sensor/status
# https://esphome.io/components/binary_sensor/status
- platform: status
name: ${name} ESP32 Online Status
id: esp32_online_status
+31
View File
@@ -0,0 +1,31 @@
# Updated : 2025.06.19
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
substitutions:
yambms_version: "1.5.7"
esphome:
name: ${hostname}
friendly_name: ${friendly_name}
# comment: 'Solar system braining and more !'
# area: 'Technical local'
project:
name: Sleeper85.YamBMS
version: ${yambms_version}
min_version: 2025.6.0
+3 -3
View File
@@ -1,5 +1,5 @@
# Updated : 2025.01.20
# Version : 1.5.3
# Updated : 2025.06.10
# Version : 1.5.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -18,7 +18,7 @@
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
sensor:
# https://esphome.io/components/sensor/wifi_signal
# https://esphome.io/components/sensor/wifi_signal
- platform: wifi_signal
name: ${name} ESP32 WiFi power
id: esp32_wifi_power
+4 -4
View File
@@ -1,5 +1,5 @@
# Updated : 2024.08.28
# Version : 1.1.3
# Updated : 2025.07.11
# Version : 1.1.4
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -42,7 +42,7 @@ sensor:
id: esp32_loop_time
- platform: template
name: ${name} ${debug_name} Heap free (%)
name: ${name} ${debug_name} Heap free percent
id: esp32_heap_free_percent
unit_of_measurement: '%'
accuracy_decimals: 2
@@ -54,7 +54,7 @@ sensor:
lambda: return ( id(esp32_heap_free).state * 100 / 327680 );
- platform: template
name: ${name} ${debug_name} Heap max block (%)
name: ${name} ${debug_name} Heap max block percent
id: esp32_heap_max_block_percent
unit_of_measurement: '%'
accuracy_decimals: 2
@@ -1,5 +1,5 @@
# Updated : 2024.08.28
# Version : 1.1.3
# Updated : 2025.07.11
# Version : 1.1.4
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -45,7 +45,7 @@ sensor:
id: esp32_loop_time
- platform: template
name: ${name} ${debug_name} Heap free (%)
name: ${name} ${debug_name} Heap free percent
id: esp32_heap_free_percent
unit_of_measurement: '%'
accuracy_decimals: 2
@@ -57,7 +57,7 @@ sensor:
lambda: return ( id(esp32_heap_free).state * 100 / 327680 );
- platform: template
name: ${name} ${debug_name} Heap max block (%)
name: ${name} ${debug_name} Heap max block percent
id: esp32_heap_max_block_percent
unit_of_measurement: '%'
accuracy_decimals: 2
@@ -69,7 +69,7 @@ sensor:
lambda: return ( id(esp32_heap_max_block).state * 100 / 327680 );
- platform: template
name: ${name} ${debug_name} Free PSRAM (%)
name: ${name} ${debug_name} Free PSRAM percent
id: esp32_free_psram_percent
unit_of_measurement: '%'
accuracy_decimals: 2
+62 -5
View File
@@ -1,5 +1,5 @@
# Updated : 2025.04.04
# Version : 1.2.2
# Updated : 2025.06.15
# Version : 1.2.4
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -17,6 +17,22 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
number:
# +--------------------------------------+
# | Charging Cycles Offset |
# +--------------------------------------+
- platform: template
name: "${name} ${bms_name} Charging Cycles Offset"
id: bms${bms_id}_charging_cycles_offset
step: 1
min_value: 0
max_value: 3000
initial_value: 0
restore_value: true
icon: mdi:counter
optimistic: true
entity_category: config
sensor:
# +--------------------------------------+
# | Total Daily Energy |
@@ -25,8 +41,8 @@ sensor:
name: "${name} ${bms_name} Daily Charging Energy"
power_id: bms${bms_id}_charging_power
unit_of_measurement: 'kWh'
state_class: total_increasing
device_class: energy
state_class: total_increasing
accuracy_decimals: 3
filters:
# Multiplication factor from W to kW is 0.001
@@ -35,8 +51,8 @@ sensor:
name: "${name} ${bms_name} Daily Discharging Energy"
power_id: bms${bms_id}_discharging_power
unit_of_measurement: 'kWh'
state_class: total_increasing
device_class: energy
state_class: total_increasing
accuracy_decimals: 3
filters:
# Multiplication factor from W to kW is 0.001
@@ -48,9 +64,9 @@ sensor:
- platform: template
name: ${name} ${bms_name} Battery SoC
id: bms${bms_id}_battery_soc
update_interval: ${bms_update_interval}
unit_of_measurement: "%"
device_class: battery
update_interval: ${bms_update_interval}
accuracy_decimals: 0
filters:
- or:
@@ -64,3 +80,44 @@ sensor:
if (min_cell_v <= cell_low_v) return 0; // Real 0% => return 0%
else if (soc < 1) return 2; // False 0% => return 2%
else return soc; // Else => return BMS SoC
# +--------------------------------------+
# | Charging Cycles |
# +--------------------------------------+
- platform: template
name: "${name} ${bms_name} charging cycles"
id: bms${bms_id}_charging_cycles
update_interval: ${bms_update_interval}
state_class: total
icon: mdi:counter
accuracy_decimals: 0
filters:
- or:
- throttle: 10s
- delta: 1
lambda: |-
float cycles_raw = id(bms${bms_id}_charging_cycles_raw).state;
if (isnan(cycles_raw)) cycles_raw = 0;
return cycles_raw + id(bms${bms_id}_charging_cycles_offset).state;
# +--------------------------------------+
# | Charging Cycle Capacity |
# +--------------------------------------+
- platform: template
name: "${name} ${bms_name} total charging cycle capacity"
id: bms${bms_id}_cycle_capacity
update_interval: ${bms_update_interval}
unit_of_measurement: Ah
state_class: total
icon: mdi:car-battery
accuracy_decimals: 0
filters:
- or:
- throttle: 10s
- delta: 1
lambda: |-
float capacity_raw = id(bms${bms_id}_cycle_capacity_raw).state;
if (isnan(capacity_raw)) capacity_raw = 0;
return capacity_raw +
id(bms${bms_id}_charging_cycles_offset).state *
id(bms${bms_id}_battery_capacity).state;
+3 -3
View File
@@ -1,5 +1,5 @@
# Updated : 2025.04.01
# Version : 1.1.1
# Updated : 2025.06.10
# Version : 1.1.2
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -15,7 +15,7 @@
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
sensor:
# +--------------------------------------+
+9 -9
View File
@@ -1,5 +1,5 @@
# Updated : 2025.04.01
# Version : 1.5.5
# Updated : 2025.06.19
# Version : 1.5.7
# GitHub : https://github.com/Sleeper85/esphome-yambms
# This YAML is free software: you can redistribute it and/or
@@ -107,10 +107,10 @@ interval:
// TOTAL total_voltage
id(${yambms_id}_var_bms_total_voltage) += id(bms${bms_id}_total_voltage).state;
// TOTAL current
id(${yambms_id}_var_bms_total_current) += id(bms${bms_id}_current).state;
// TOTAL power
id(${yambms_id}_var_bms_total_power) += id(bms${bms_id}_power).state;
@@ -125,18 +125,18 @@ interval:
// TOTAL SoH
id(${yambms_id}_var_bms_total_soh) += id(bms${bms_id}_battery_soh).state;
// TOTAL charging_cycles
id(${yambms_id}_var_total_charging_cycles) += id(bms${bms_id}_charging_cycles).state;
// TOTAL equalizing_counter
if (id(bms${bms_id}_equalizing).state) id(${yambms_id}_var_equalizing_counter) += 1;
// MIN/MAX values
// MAX balance_trigger_voltage
if (id(bms${bms_id}_balance_trigger_voltage).state > id(${yambms_id}_var_max_balance_trigger_voltage))
id(${yambms_id}_var_max_balance_trigger_voltage) = id(bms${bms_id}_balance_trigger_voltage).state;
// MIN min_cell_voltage
// MIN min_voltage_cell (cell number)
if (id(bms${bms_id}_min_cell_voltage).state < id(${yambms_id}_var_min_cell_voltage))
@@ -152,11 +152,11 @@ interval:
id(${yambms_id}_var_max_cell_voltage) = id(bms${bms_id}_max_cell_voltage).state;
id(${yambms_id}_var_max_voltage_cell) = id(bms${bms_id}_max_voltage_cell).state + (${bms_id} * 100);
}
// MIN cell_ovp
if (id(bms${bms_id}_cell_ovp).state < id(${yambms_id}_var_min_cell_ovp))
id(${yambms_id}_var_min_cell_ovp) = id(bms${bms_id}_cell_ovp).state;
// MAX cell_uvp
if (id(bms${bms_id}_cell_uvp).state > id(${yambms_id}_var_max_cell_uvp))
id(${yambms_id}_var_max_cell_uvp) = id(bms${bms_id}_cell_uvp).state;
@@ -0,0 +1,38 @@
# Updated : 2025.06.17
# Version : 1.1.2
# GitHub : https://github.com/txubelaxu/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
substitutions:
bms_model: "BASEN"
bms_protocol: "RS485"
# +--------------------------------------+
# | Component settings |
# +--------------------------------------+
external_components:
- source: github://GHswitt/esphome-basen@main
refresh: 0s
uart:
- id: !extend ${basen_uart_id}
baud_rate: ${basen_uart_baud_rate}
basen_controller:
- uart_id: ${basen_uart_id}
id: ${basen_controller_id}
@@ -0,0 +1,22 @@
# Updated : 2025.06.01
# Version : 1.1.1
# GitHub : https://github.com/syssi/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
packages:
bms_sensors: !include bms_sensors_BASEN_RS485_full.yaml
bms_combine: !include bms_combine.yaml
@@ -1,5 +1,5 @@
# Updated : 2025.04.14
# Version : 1.1.1
# Updated : 2025.06.11
# Version : 1.1.2
# GitHub : https://github.com/GHswitt/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -20,9 +20,7 @@
substitutions:
bms_model: "DEYE"
bms_protocol: "CAN"
packages:
bms_base: !include bms_base.yaml
bms_combine: !include bms_combine.yaml
bms_errors_bitmask: !include bms_errors_bitmask_DEYE_CAN.yaml
bms_module: !include bms_sensors_DEYE_CAN_module_full.yaml
bms_combine: !include bms_combine.yaml
@@ -1,5 +1,5 @@
# Updated : 2025.04.14
# Version : 1.1.1
# Updated : 2025.06.11
# Version : 1.1.2
# GitHub : https://github.com/GHswitt/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -20,9 +20,7 @@
substitutions:
bms_model: "DEYE"
bms_protocol: "CAN"
packages:
bms_base: !include bms_base.yaml
bms_combine: !include bms_combine.yaml
bms_errors_bitmask: !include bms_errors_bitmask_DEYE_CAN.yaml
bms_module: !include bms_sensors_DEYE_CAN_module_minimal.yaml
bms_combine: !include bms_combine.yaml
@@ -1,5 +1,5 @@
# Updated : 2025.04.01
# Version : 1.2.7
# Updated : 2025.07.07
# Version : 1.2.9
# GitHub : https://github.com/syssi/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -33,7 +33,7 @@ ota:
then:
- switch.turn_off: bms${bms_id}_enable_bluetooth_connection
- logger.log: "BLE shutdown for flashing"
# +--------------------------------------+
# | Component settings |
# +--------------------------------------+
@@ -101,6 +101,7 @@ switch:
id: bms${bms_id}_discharge_switch
name: "${name} ${bms_name} Discharge switch"
balancer:
id: bms${bms_id}_balance_switch
name: "${name} ${bms_name} Balance switch"
# Commits 2024.01.20 : Add new switch entities of firmware version 14 (from V11)
heating:
@@ -286,9 +287,12 @@ sensor:
id: bms${bms_id}_battery_capacity
name: "${name} ${bms_name} total battery capacity setting"
charging_cycles:
id: bms${bms_id}_charging_cycles
id: bms${bms_id}_charging_cycles_raw
internal: true
name: "${name} ${bms_name} charging cycles"
total_charging_cycle_capacity:
id: bms${bms_id}_cycle_capacity_raw
internal: true
name: "${name} ${bms_name} total charging cycle capacity"
total_runtime:
name: "${name} ${bms_name} total runtime"
@@ -321,7 +325,7 @@ sensor:
name: "${name} ${bms_name} heating current"
# Commits 2024.07.07 : Improve the support of the JK-PBs series (ALL)
balancing:
name: "${name} ${bms_name} balancing"
name: "${name} ${bms_name} balancing"
text_sensor:
- platform: jk_bms_ble
+8 -4
View File
@@ -1,5 +1,5 @@
# Updated : 2025.04.01
# Version : 1.2.7
# Updated : 2025.07.07
# Version : 1.2.9
# GitHub : https://github.com/syssi/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -33,7 +33,7 @@ ota:
then:
- switch.turn_off: bms${bms_id}_enable_bluetooth_connection
- logger.log: "BLE shutdown for flashing"
# +--------------------------------------+
# | Component settings |
# +--------------------------------------+
@@ -98,6 +98,7 @@ switch:
id: bms${bms_id}_discharge_switch
name: "${name} ${bms_name} Discharge switch"
balancer:
id: bms${bms_id}_balance_switch
name: "${name} ${bms_name} Balance switch"
# +--------------------------------------+
- platform: ble_client
@@ -281,9 +282,12 @@ sensor:
id: bms${bms_id}_battery_capacity
name: "${name} ${bms_name} total battery capacity setting"
charging_cycles:
id: bms${bms_id}_charging_cycles
id: bms${bms_id}_charging_cycles_raw
internal: true
name: "${name} ${bms_name} charging cycles"
total_charging_cycle_capacity:
id: bms${bms_id}_cycle_capacity_raw
internal: true
name: "${name} ${bms_name} total charging cycle capacity"
total_runtime:
name: "${name} ${bms_name} total runtime"
+8 -4
View File
@@ -1,5 +1,5 @@
# Updated : 2025.04.01
# Version : 1.2.7
# Updated : 2025.07.07
# Version : 1.2.9
# GitHub : https://github.com/syssi/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -33,7 +33,7 @@ ota:
then:
- switch.turn_off: bms${bms_id}_enable_bluetooth_connection
- logger.log: "BLE shutdown for flashing"
# +--------------------------------------+
# | Component settings |
# +--------------------------------------+
@@ -98,6 +98,7 @@ switch:
id: bms${bms_id}_discharge_switch
name: "${name} ${bms_name} Discharge switch"
balancer:
id: bms${bms_id}_balance_switch
name: "${name} ${bms_name} Balance switch"
# +--------------------------------------+
- platform: ble_client
@@ -161,9 +162,12 @@ sensor:
id: bms${bms_id}_battery_capacity
name: "${name} ${bms_name} total battery capacity setting"
charging_cycles:
id: bms${bms_id}_charging_cycles
id: bms${bms_id}_charging_cycles_raw
internal: true
name: "${name} ${bms_name} charging cycles"
total_charging_cycle_capacity:
id: bms${bms_id}_cycle_capacity_raw
internal: true
name: "${name} ${bms_name} total charging cycle capacity"
balancing_current:
name: "${name} ${bms_name} balancing current"
@@ -1,5 +1,5 @@
# Updated : 2025.04.01
# Version : 1.1.3
# Updated : 2025.06.11
# Version : 1.1.4
# GitHub : https://github.com/syssi/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -327,7 +327,8 @@ sensor:
# FAKE charging_cycles
- platform: template
id: bms${bms_id}_charging_cycles
id: bms${bms_id}_charging_cycles_raw
internal: true
name: "${name} ${bms_name} charging cycles"
update_interval: ${bms_update_interval}
accuracy_decimals: 0
@@ -338,6 +339,23 @@ sensor:
- delta: 1
lambda: return 0;
# FAKE cycle capacity
- platform: template
name: "${name} ${bms_name} charging cycle capacity"
id: "bms${bms_id}_cycle_capacity_raw"
internal: true
update_interval: ${bms_update_interval}
unit_of_measurement: Ah
state_class: 'measurement'
accuracy_decimals: 0
icon: mdi:car-battery
filters:
- or:
- throttle: 600s
- delta: 1
lambda: |-
return id(bms${bms_id}_charging_cycles_raw).state * id(bms${bms_id}_battery_capacity).state;
# FAKE errors_bitmask
# Alarm management is not supported at this time
# Internal : only specifying an id without a name will implicitly set this to true.
@@ -1,5 +1,5 @@
# Updated : 2025.04.01
# Version : 1.2.5
# Updated : 2025.07.07
# Version : 1.2.7
# GitHub : https://github.com/txubelaxu/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -49,6 +49,7 @@ switch:
id: bms${bms_id}_discharge_switch
name: "${name} ${bms_name} discharging"
balancing:
id: bms${bms_id}_balance_switch
name: "${name} ${bms_name} balancing"
emergency:
name: "${name} ${bms_name} emergency"
@@ -162,9 +163,12 @@ sensor:
id: bms${bms_id}_capacity_remaining_ah
name: "${name} ${bms_name} battery capacity remaining"
charging_cycles:
id: bms${bms_id}_charging_cycles
id: bms${bms_id}_charging_cycles_raw
internal: true
name: "${name} ${bms_name} charging cycles"
battery_capacity_total_charging_cycle:
id: bms${bms_id}_cycle_capacity_raw
internal: true
name: "${name} ${bms_name} battery capacity total charging cycle"
battery_total_runtime:
name: "${name} ${bms_name} battery total runtime"
@@ -175,9 +179,9 @@ sensor:
name: "${name} ${bms_name} errors bitmask"
cell_count_real:
name: "${name} ${bms_name} cell count real"
battery_total_alarms_count:
battery_total_alarms_count:
name: "${name} ${bms_name} battery total alarms count"
battery_total_alarms_active:
battery_total_alarms_active:
name: "${name} ${bms_name} battery total alarms active"
uart1_protocol_number:
name: "${name} ${bms_name} uart1 protocol number"
@@ -213,7 +217,7 @@ text_sensor:
info_device_serial_number:
name: "${name} ${bms_name} info device serial number"
info_device_setup_passcode:
name: "${name} ${bms_name} info device setup passcode"
name: "${name} ${bms_name} info device setup passcode"
number:
- platform: jk_rs485_bms
@@ -231,7 +235,7 @@ number:
name: "${name} ${bms_name} max charging current"
max_discharging_current:
id: bms${bms_id}_max_discharge_current
name: "${name} ${bms_name} max discharging current"
name: "${name} ${bms_name} max discharging current"
cell_overvoltage_protection:
id: bms${bms_id}_cell_ovp
name: "${name} ${bms_name} cell overvoltage protection"
@@ -256,4 +260,4 @@ number:
id: bms${bms_id}_cell_uvpr
name: "${name} ${bms_name} cell undervoltage protection recovery"
cell_power_off_voltage:
name: "${name} ${bms_name} cell power off voltage"
name: "${name} ${bms_name} cell power off voltage"
@@ -1,5 +1,5 @@
# Updated : 2025.04.01
# Version : 1.2.8
# Updated : 2025.06.10
# Version : 1.2.9
# GitHub : https://github.com/txubelaxu/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -54,6 +54,6 @@ switch:
optimistic: true
entity_category: config
turn_on_action:
- lambda: id(${sniffer_id}).set_broadcast_changes_to_all_bms(true);
- lambda: id(${sniffer_id}).set_broadcast_changes_to_all_bms(true);
turn_off_action:
- lambda: id(${sniffer_id}).set_broadcast_changes_to_all_bms(false);
- lambda: id(${sniffer_id}).set_broadcast_changes_to_all_bms(false);
@@ -1,5 +1,5 @@
# Updated : 2025.04.01
# Version : 1.2.8
# Updated : 2025.06.10
# Version : 1.2.9
# GitHub : https://github.com/txubelaxu/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -42,7 +42,7 @@ jk_rs485_sniffer:
rx_timeout: 500ms
uart_id: ${sniffer_uart_id}
talk_pin: ${sniffer_talk_pin}
# +--------------------------------------+
# | Component entities |
# +--------------------------------------+
@@ -55,6 +55,6 @@ switch:
optimistic: true
entity_category: config
turn_on_action:
- lambda: id(${sniffer_id}).set_broadcast_changes_to_all_bms(true);
- lambda: id(${sniffer_id}).set_broadcast_changes_to_all_bms(true);
turn_off_action:
- lambda: id(${sniffer_id}).set_broadcast_changes_to_all_bms(false);
- lambda: id(${sniffer_id}).set_broadcast_changes_to_all_bms(false);
@@ -1,5 +1,5 @@
# Updated : 2025.04.01
# Version : 1.2.8
# Updated : 2025.06.11
# Version : 1.2.9
# GitHub : https://github.com/syssi/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -136,9 +136,12 @@ sensor:
name: "${name} ${bms_name} temperature sensors"
entity_category: diagnostic
charging_cycles:
id: bms${bms_id}_charging_cycles
id: bms${bms_id}_charging_cycles_raw
internal: true
name: "${name} ${bms_name} charging cycles"
total_charging_cycle_capacity:
id: bms${bms_id}_cycle_capacity_raw
internal: true
name: "${name} ${bms_name} total charging cycle capacity"
battery_strings:
id: bms${bms_id}_cell_count
@@ -1,5 +1,5 @@
# Updated : 2025.04.01
# Version : 1.1.3
# Updated : 2025.06.16
# Version : 1.1.1
# GitHub : https://github.com/syssi/esphome-seplos-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -17,239 +17,6 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
substitutions:
bms_model: "Seplos V1 V2"
bms_protocol: "RS485"
packages:
bms_base: !include bms_base.yaml
bms_sensors: !include bms_sensors_SEPLOS_V1_V2_RS485_bms_full.yaml
bms_combine: !include bms_combine.yaml
bms_temperature_sensor: !include bms_temperature_sensor_4.yaml
# +--------------------------------------+
# | Component settings |
# +--------------------------------------+
external_components:
- source: github://syssi/esphome-seplos-bms@main
refresh: 0s
seplos_bms:
- id: seplos_bms${bms_id}
address: ${bms_address}
protocol_version: ${bms_protocol_version}
seplos_modbus_id: ${seplos_modbus_id}
update_interval: ${bms_update_interval}
# +--------------------------------------+
# | Component entities |
# +--------------------------------------+
sensor:
- platform: seplos_bms
seplos_bms_id: seplos_bms${bms_id}
min_cell_voltage:
id: bms${bms_id}_min_cell_voltage
name: "${name} ${bms_name} min cell voltage"
max_cell_voltage:
id: bms${bms_id}_max_cell_voltage
name: "${name} ${bms_name} max cell voltage"
min_voltage_cell:
id: bms${bms_id}_min_voltage_cell
name: "${name} ${bms_name} min voltage cell"
max_voltage_cell:
id: bms${bms_id}_max_voltage_cell
name: "${name} ${bms_name} max voltage cell"
delta_cell_voltage:
name: "${name} ${bms_name} delta cell voltage"
average_cell_voltage:
id: bms${bms_id}_average_cell_voltage
name: "${name} ${bms_name} average cell voltage"
cell_voltage_1:
name: "${name} ${bms_name} cell voltage 01"
cell_voltage_2:
name: "${name} ${bms_name} cell voltage 02"
cell_voltage_3:
name: "${name} ${bms_name} cell voltage 03"
cell_voltage_4:
name: "${name} ${bms_name} cell voltage 04"
cell_voltage_5:
name: "${name} ${bms_name} cell voltage 05"
cell_voltage_6:
name: "${name} ${bms_name} cell voltage 06"
cell_voltage_7:
name: "${name} ${bms_name} cell voltage 07"
cell_voltage_8:
name: "${name} ${bms_name} cell voltage 08"
cell_voltage_9:
name: "${name} ${bms_name} cell voltage 09"
cell_voltage_10:
name: "${name} ${bms_name} cell voltage 10"
cell_voltage_11:
name: "${name} ${bms_name} cell voltage 11"
cell_voltage_12:
name: "${name} ${bms_name} cell voltage 12"
cell_voltage_13:
name: "${name} ${bms_name} cell voltage 13"
cell_voltage_14:
name: "${name} ${bms_name} cell voltage 14"
cell_voltage_15:
name: "${name} ${bms_name} cell voltage 15"
cell_voltage_16:
name: "${name} ${bms_name} cell voltage 16"
temperature_1:
id: bms${bms_id}_temperature_sensor_1
name: "${name} ${bms_name} temperature 1"
temperature_2:
id: bms${bms_id}_temperature_sensor_2
name: "${name} ${bms_name} temperature 2"
temperature_3:
id: bms${bms_id}_temperature_sensor_3
name: "${name} ${bms_name} temperature 3"
temperature_4:
id: bms${bms_id}_temperature_sensor_4
name: "${name} ${bms_name} temperature 4"
temperature_5:
name: "${name} ${bms_name} environment temperature"
temperature_6:
name: "${name} ${bms_name} mosfet temperature"
total_voltage:
id: bms${bms_id}_total_voltage
name: "${name} ${bms_name} total voltage"
current:
id: bms${bms_id}_current
name: "${name} ${bms_name} current"
power:
id: bms${bms_id}_power
name: "${name} ${bms_name} power"
charging_power:
id: bms${bms_id}_charging_power
name: "${name} ${bms_name} charging power"
discharging_power:
id: bms${bms_id}_discharging_power
name: "${name} ${bms_name} discharging power"
residual_capacity:
id: bms${bms_id}_capacity_remaining_ah
name: "${name} ${bms_name} residual capacity"
battery_capacity:
id: bms${bms_id}_battery_capacity
name: "${name} ${bms_name} battery capacity"
rated_capacity:
name: "${name} ${bms_name} rated capacity"
state_of_charge:
id: bms${bms_id}_state_of_charge
name: "${name} ${bms_name} state of charge"
charging_cycles:
id: bms${bms_id}_charging_cycles
name: "${name} ${bms_name} charging cycles"
state_of_health:
id: bms${bms_id}_battery_soh
name: "${name} ${bms_name} state of health"
port_voltage:
name: "${name} ${bms_name} port voltage"
# Required sensors cannot be retrieved from BMS
# max_charge_current
- platform: template
id: bms${bms_id}_max_charge_current
name: "${name} ${bms_name} max charge current"
update_interval: ${bms_update_interval}
accuracy_decimals: 0
unit_of_measurement: A
icon: mdi:current-dc
filters:
- or:
- throttle: 10s
- delta: 1
lambda: return ${bms_max_charge_current};
# max_discharge_current
- platform: template
id: bms${bms_id}_max_discharge_current
name: "${name} ${bms_name} max discharge current"
update_interval: ${bms_update_interval}
accuracy_decimals: 0
unit_of_measurement: A
icon: mdi:current-dc
filters:
- or:
- throttle: 10s
- delta: 1
lambda: return ${bms_max_discharge_current};
# cell_ovp
- platform: template
id: bms${bms_id}_cell_ovp
name: "${name} ${bms_name} cell ovp"
update_interval: ${bms_update_interval}
accuracy_decimals: 3
unit_of_measurement: V
device_class: voltage
filters:
- or:
- throttle: 10s
- delta: 0.001
lambda: return ${bms_cell_ovp};
# cell_uvp
- platform: template
id: bms${bms_id}_cell_uvp
name: "${name} ${bms_name} cell uvp"
update_interval: ${bms_update_interval}
accuracy_decimals: 3
unit_of_measurement: V
device_class: voltage
filters:
- or:
- throttle: 10s
- delta: 0.001
lambda: return ${bms_cell_uvp};
# balance_trigger_voltage
- platform: template
id: bms${bms_id}_balance_trigger_voltage
name: "${name} ${bms_name} balance trigger voltage"
update_interval: ${bms_update_interval}
accuracy_decimals: 3
unit_of_measurement: V
device_class: voltage
filters:
- or:
- throttle: 10s
- delta: 0.001
lambda: return ${bms_balance_trigger_voltage};
# FAKE errors_bitmask
# Alarm management is not supported at this time
# Internal : only specifying an id without a name will implicitly set this to true.
- platform: template
id: bms${bms_id}_yambms_errors_bitmask
update_interval: ${bms_update_interval}
accuracy_decimals: 0
icon: mdi:alert-circle-outline
filters:
- or:
- throttle: 10s
- delta: 1
lambda: return 0;
binary_sensor:
# Required sensors cannot be retrieved from BMS
# online_status
- platform: template
id: bms${bms_id}_online_status
name: "${name} ${bms_name} online status"
lambda: |-
if (id(bms${bms_id}_total_voltage).state > 0)
return true;
else
return false;
# equalizing
- platform: template
id: bms${bms_id}_equalizing
name: "${name} ${bms_name} balancing"
lambda: return false;
# bms_switch_charging
- platform: template
id: bms${bms_id}_charging_allowed
name: "${name} ${bms_name} charging"
lambda: return true;
# bms_switch_discharging
- platform: template
id: bms${bms_id}_discharging_allowed
name: "${name} ${bms_name} discharging"
lambda: return true;
+31 -3
View File
@@ -1,5 +1,5 @@
# Updated : 2025.04.01
# Version : 1.1.4
# Updated : 2025.06.12
# Version : 1.1.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -43,7 +43,35 @@ modbus_controller:
on_offline:
then:
- logger.log: "BMS ${bms_id} modbus server goes offline !"
- lambda: id(bms${bms_id}_online_status).publish_state(false);
- lambda: |-
id(bms${bms_id}_online_status).publish_state(false);
id(bms${bms_id}_charging_allowed).publish_state(false);
id(bms${bms_id}_discharging_allowed).publish_state(false);
id(bms${bms_id}_equalizing).publish_state(false);
id(bms${bms_id}_total_voltage).publish_state(0);
id(bms${bms_id}_current).publish_state(0);
id(bms${bms_id}_power).publish_state(0);
id(bms${bms_id}_battery_soc).publish_state(0);
id(bms${bms_id}_battery_capacity).publish_state(0);
id(bms${bms_id}_capacity_remaining_ah).publish_state(0);
id(bms${bms_id}_charging_cycles).publish_state(0);
id(bms${bms_id}_max_charge_current).publish_state(0);
id(bms${bms_id}_max_discharge_current).publish_state(0);
id(bms${bms_id}_max_cell_voltage).publish_state(0);
id(bms${bms_id}_max_voltage_cell).publish_state(0);
id(bms${bms_id}_min_cell_voltage).publish_state(0);
id(bms${bms_id}_min_voltage_cell).publish_state(0);
id(bms${bms_id}_min_temperature).publish_state(0);
id(bms${bms_id}_min_temperature_sensor).publish_state(0);
id(bms${bms_id}_max_temperature).publish_state(0);
id(bms${bms_id}_max_temperature_sensor).publish_state(0);
id(bms${bms_id}_cell_ovp).publish_state(0);
id(bms${bms_id}_cell_uvp).publish_state(0);
id(bms${bms_id}_balance_trigger_voltage).publish_state(0);
id(bms${bms_id}_yambms_errors_bitmask).publish_state(0);
id(bms${bms_id}_charging_power).publish_state(0);
id(bms${bms_id}_discharging_power).publish_state(0);
id(bms${bms_id}_battery_soh).publish_state(0);
# +--------------------------------------+
# | Component entities |
@@ -0,0 +1,56 @@
# Updated : 2025.06.01
# Version : 1.1.1
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
# +--------------------------------------+
# | BASEN Errors Bitmask |
# +--------------------------------------+
# equals
# +--------------------------------------+
# | YamBMS Errors Bitmask (16bit) |
# +--------------------------------------+
# Bit 0 General alarm 0000 0000 0000 0001 0x0001
# Bit 1 Battery high voltage alarm 0000 0000 0000 0010 0x0002
# Bit 2 Battery low voltage alarm 0000 0000 0000 0100 0x0004
# Bit 3 Battery high temperature alarm 0000 0000 0000 1000 0x0008
# Bit 4 Battery low temperature alarm 0000 0000 0001 0000 0x0010
# Bit 5 Battery high temperature charge alarm 0000 0000 0010 0000 0x0020
# Bit 6 Battery low temperature charge alarm 0000 0000 0100 0000 0x0040
# Bit 7 Battery high discharge current alarm 0000 0000 1000 0000 0x0080
# Bit 8 Battery high charge current alarm 0000 0001 0000 0000 0x0100
# Bit 9 Contactor alarm 0000 0010 0000 0000 0x0200
# Bit 10 Short circuit alarm 0000 0100 0000 0000 0x0400
# Bit 11 BMS internal alarm 0000 1000 0000 0000 0x0800
# Bit 12 Cell imbalance alarm 0001 0000 0000 0000 0x1000
# Bit 13 Reserved 0010 0000 0000 0000 0x2000
# Bit 14 Reserved 0100 0000 0000 0000 0x4000
# Bit 15 Reserved 1000 0000 0000 0000 0x8000
sensor:
- platform: template
id: bms${bms_id}_yambms_errors_bitmask
name: "${name} ${bms_name} YamBMS Errors Bitmask"
update_interval: ${bms_update_interval}
accuracy_decimals: 0
icon: mdi:alert-circle-outline
filters:
- or:
- throttle: 10s
- delta: 1
lambda: |-
return id(bms${bms_id}_errors_bitmask).state;
@@ -1,5 +1,5 @@
# Updated : 2025.04.14
# Version : 1.1.1
# Updated : 2025.06.10
# Version : 1.1.2
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -20,7 +20,7 @@
# | DEYE CAN PCS Errors Bitmask (64bit) |
# +--------------------------------------+
# Bit 0 Cell overvoltage 0000 0000 0000 0001 0x0001
# Bit 0 Cell overvoltage 0000 0000 0000 0001 0x0001
# Bit 1 Cell undervoltage 0000 0000 0000 0010 0x0002
# Bit 2 Module overvoltage 0000 0000 0000 0100 0x0004
# Bit 3 Module undervoltage 0000 0000 0000 1000 0x0008
@@ -65,7 +65,7 @@
# | YamBMS Errors Bitmask (16bit) |
# +--------------------------------------+
# Bit 0 General alarm 0000 0000 0000 0001 0x0001
# Bit 0 General alarm 0000 0000 0000 0001 0x0001
# Bit 1 Battery high voltage alarm 0000 0000 0000 0010 0x0002
# Bit 2 Battery low voltage alarm 0000 0000 0000 0100 0x0004
# Bit 3 Battery high temperature alarm 0000 0000 0000 1000 0x0008
@@ -99,7 +99,7 @@ sensor:
if (bms_errors_bitmask > 0)
{
// General alarm:
// General alarm:
// Unused
// High voltage
if (bms_errors_bitmask & 0x0005) yambms_errors_bitmask |= 0x0002; // Cell or module
+4 -4
View File
@@ -1,5 +1,5 @@
# Updated : 2025.01.25
# Version : 1.1.2
# Updated : 2025.06.10
# Version : 1.1.3
# GitHub : https://github.com/syssi/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -21,7 +21,7 @@
# | JBD UART Errors Bitmask (16bit) |
# +--------------------------------------+
# Bit 0 Cell overvoltage 0000 0000 0000 0001 0x0001
# Bit 0 Cell overvoltage 0000 0000 0000 0001 0x0001
# Bit 1 Cell undervoltage 0000 0000 0000 0010 0x0002
# Bit 2 Pack overvoltage 0000 0000 0000 0100 0x0004
# Bit 3 Pack undervoltage 0000 0000 0000 1000 0x0008
@@ -42,7 +42,7 @@
# | YamBMS Errors Bitmask (16bit) |
# +--------------------------------------+
# Bit 0 General alarm 0000 0000 0000 0001 0x0001
# Bit 0 General alarm 0000 0000 0000 0001 0x0001
# Bit 1 Battery high voltage alarm 0000 0000 0000 0010 0x0002
# Bit 2 Battery low voltage alarm 0000 0000 0000 0100 0x0004
# Bit 3 Battery high temperature alarm 0000 0000 0000 1000 0x0008
+5 -5
View File
@@ -1,5 +1,5 @@
# Updated : 2025.01.25
# Version : 1.1.2
# Updated : 2025.06.10
# Version : 1.1.3
# GitHub : https://github.com/syssi/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -21,7 +21,7 @@
# | JK BLE Errors Bitmask (16bit) |
# +--------------------------------------+
# Bit 0 Charge overtemperature 0000 0000 0000 0001 0x0001
# Bit 0 Charge overtemperature 0000 0000 0000 0001 0x0001
# Bit 1 Charge undertemperature 0000 0000 0000 0010 0x0002
# Bit 2 Coprocessor communication error 0000 0000 0000 0100 0x0004
# Bit 3 Cell undervoltage 0000 0000 0000 1000 0x0008
@@ -42,7 +42,7 @@
# | YamBMS Errors Bitmask (16bit) |
# +--------------------------------------+
# Bit 0 General alarm 0000 0000 0000 0001 0x0001
# Bit 0 General alarm 0000 0000 0000 0001 0x0001
# Bit 1 Battery high voltage alarm 0000 0000 0000 0010 0x0002
# Bit 2 Battery low voltage alarm 0000 0000 0000 0100 0x0004
# Bit 3 Battery high temperature alarm 0000 0000 0000 1000 0x0008
@@ -94,4 +94,4 @@ sensor:
if (bms_errors_bitmask & 0x8000) yambms_errors_bitmask |= 0x0400;
}
return yambms_errors_bitmask;
return yambms_errors_bitmask;
@@ -1,5 +1,5 @@
# Updated : 2025.01.25
# Version : 1.1.2
# Updated : 2025.06.10
# Version : 1.1.3
# GitHub : https://github.com/syssi/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -21,7 +21,7 @@
# | JK RS485 Modbus Errors Bitmask (24bit) |
# +----------------------------------------+
# Bit 0 Wire resistance 0000 0000 0000 0001 0x0001
# Bit 0 Wire resistance 0000 0000 0000 0001 0x0001
# Bit 1 MOS OTP 0000 0000 0000 0010 0x0002
# Bit 2 Cell quantity 0000 0000 0000 0100 0x0004
# Bit 3 Current sensor error 0000 0000 0000 1000 0x0008
@@ -50,7 +50,7 @@
# | YamBMS Errors Bitmask (16bit) |
# +--------------------------------------+
# Bit 0 General alarm 0000 0000 0000 0001 0x0001
# Bit 0 General alarm 0000 0000 0000 0001 0x0001
# Bit 1 Battery high voltage alarm 0000 0000 0000 0010 0x0002
# Bit 2 Battery low voltage alarm 0000 0000 0000 0100 0x0004
# Bit 3 Battery high temperature alarm 0000 0000 0000 1000 0x0008
@@ -1,5 +1,5 @@
# Updated : 2025.01.25
# Version : 1.1.2
# Updated : 2025.06.10
# Version : 1.1.3
# GitHub : https://github.com/syssi/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -21,7 +21,7 @@
# | JK UART 4G-GPS Errors Bitmask (16bit) |
# +---------------------------------------+
# Bit 0 Low capacity 0000 0000 0000 0001 0x0001
# Bit 0 Low capacity 0000 0000 0000 0001 0x0001
# Bit 1 Power tube overtemperature 0000 0000 0000 0010 0x0002
# Bit 2 Charging overvoltage 0000 0000 0000 0100 0x0004
# Bit 3 Discharging undervoltage 0000 0000 0000 1000 0x0008
@@ -42,7 +42,7 @@
# | YamBMS Errors Bitmask (16bit) |
# +--------------------------------------+
# Bit 0 General alarm 0000 0000 0000 0001 0x0001
# Bit 0 General alarm 0000 0000 0000 0001 0x0001
# Bit 1 Battery high voltage alarm 0000 0000 0000 0010 0x0002
# Bit 2 Battery low voltage alarm 0000 0000 0000 0100 0x0004
# Bit 3 Battery high temperature alarm 0000 0000 0000 1000 0x0008
@@ -94,4 +94,4 @@ sensor:
if (bms_errors_bitmask & 0x8000) yambms_errors_bitmask |= 0x0000;
}
return yambms_errors_bitmask;
return yambms_errors_bitmask;
@@ -0,0 +1,26 @@
# Updated : 2025.06.15
# Version : 1.1.1
# GitHub : https://github.com/syssi/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
substitutions:
bms_model: "BASEN"
bms_protocol: "RS485"
packages:
bms_sensors: !include bms_sensors_BASEN_RS485_full.yaml
bms_combine: !include bms_modbus_server.yaml
@@ -1,5 +1,5 @@
# Updated : 2025.04.22
# Version : 1.1.1
# Updated : 2025.06.11
# Version : 1.1.2
# GitHub : https://github.com/syssi/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -22,7 +22,5 @@ substitutions:
bms_protocol: "CAN-Modbus"
packages:
bms_base: !include bms_base.yaml
bms_sensors: !include bms_sensors_DEYE_CAN_module_full.yaml
bms_errors_bitmask: !include bms_errors_bitmask_DEYE_CAN.yaml
bms_combine: !include bms_modbus_server.yaml
@@ -1,4 +1,4 @@
# Updated : 2025.03.12
# Updated : 2025.07.07
# Version : 1.1.1
# GitHub : https://github.com/Sleeper85/esphome-yambms
@@ -17,17 +17,12 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
switch:
- platform: template
name: "${name} ${yambms_name} Force Float"
id: ${yambms_id}_switch_force_float
restore_mode: RESTORE_DEFAULT_OFF
optimistic: true
entity_category: config
interval:
- interval: ${yambms_update_interval}
- interval: ${bms_update_interval}
then:
- lambda: |-
// Force Float => Float
if (id(${yambms_id}_switch_force_float).state) id(${yambms_id}_charge_status) = "Float";
if (id(bms${bms_id}_max_cell_voltage).state > ${bms_top_v})
id(bms${bms_id}_balance_switch).turn_on();
else if (id(bms${bms_id}_min_cell_voltage).state < ${bms_bot_v})
id(bms${bms_id}_balance_switch).turn_on();
else id(bms${bms_id}_balance_switch).turn_off();
@@ -0,0 +1,445 @@
# Updated : 2025.06.17
# Version : 1.1.2
# GitHub : https://github.com/txubelaxu/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
packages:
bms_base: !include bms_base.yaml
bms_temperature_sensor: !include bms_temperature_sensor_4.yaml
bms_errors_bitmask: !include bms_errors_bitmask_BASEN_RS485.yaml
# +--------------------------------------+
# | Component settings |
# +--------------------------------------+
basen_bms:
- address: ${bms_address}
id: basen_bms_id${bms_id}
update_interval: ${bms_update_interval}
# +--------------------------------------+
# | Component entities |
# +--------------------------------------+
binary_sensor:
- platform: basen_bms
basen_bms_id: basen_bms_id${bms_id}
connected:
id: bms${bms_id}_online_status
name: "${name} ${bms_name} status online"
alarm:
id: bms${bms_id}_alarm
name: "${name} ${bms_name} alarm"
fault:
id: bms${bms_id}_fault
name: "${name} ${bms_name} fault"
# Balancing
- platform: template
id: bms${bms_id}_equalizing
name: "${name} ${bms_name} status balancing"
lambda: |-
float max_cell_voltage = id(bms${bms_id}_max_cell_voltage).state;
float delta_cell_voltage = id(bms${bms_id}_delta_voltage_cell).state;
float balance_trigger_voltage = id(bms${bms_id}_balance_trigger_voltage).state;
float balance_trigger_difference = id(bms${bms_id}_balance_trigger_difference).state;
if (max_cell_voltage < balance_trigger_voltage)
return false;
if (delta_cell_voltage >= balance_trigger_difference)
return true;
return false;
filters:
- delayed_off: 300s
# Charging allowed
- platform: template
id: bms${bms_id}_charging_allowed
name: "${name} ${bms_name} charging allowed"
lambda: |-
return !id(bms${bms_id}_fault).state;
# Discharging allowed
- platform: template
id: bms${bms_id}_discharging_allowed
name: "${name} ${bms_name} discharging allowed"
lambda: |-
return !id(bms${bms_id}_fault).state;
sensor:
- platform: basen_bms
basen_bms_id: basen_bms_id${bms_id}
error_bitmask:
id: bms${bms_id}_errors_bitmask
name: "${name} ${bms_name} errors bitmask"
voltage:
id: bms${bms_id}_total_voltage
name: "${name} ${bms_name} battery voltage"
current:
id: bms${bms_id}_current
name: "${name} ${bms_name} battery current"
power:
id: bms${bms_id}_power
name: "${name} ${bms_name} battery power"
state_of_charge:
id: bms${bms_id}_state_of_charge
name: "${name} ${bms_name} battery capacity state of charge"
state_of_health:
id: bms${bms_id}_battery_soh
name: "${name} ${bms_name} battery soh valuation"
capacity:
id: bms${bms_id}_battery_capacity
name: "${name} ${bms_name} battery capacity"
cycles:
id: bms${bms_id}_charging_cycles_raw
name: "${name} ${bms_name} charging cycles"
internal: true
temperature1:
id: bms${bms_id}_temperature_sensor_1
name: "${name} ${bms_name} temperature sensor 1"
temperature2:
id: bms${bms_id}_temperature_sensor_2
name: "${name} ${bms_name} temperature sensor 2"
temperature3:
id: bms${bms_id}_temperature_sensor_3
name: "${name} ${bms_name} temperature sensor 3"
temperature4:
id: bms${bms_id}_temperature_sensor_4
name: "${name} ${bms_name} temperature sensor 4"
temperature_mos:
name: "${name} ${bms_name} temperature MOSFET"
temperature_ambient:
name: "${name} ${bms_name} temperature ambient"
avg_cell_voltage:
id: bms${bms_id}_average_cell_voltage
name: "${name} ${bms_name} cell average voltage"
min_cell_voltage:
id: bms${bms_id}_min_cell_voltage
name: "${name} ${bms_name} cell voltage min"
max_cell_voltage:
id: bms${bms_id}_max_cell_voltage
name: "${name} ${bms_name} cell voltage max"
min_cell_index:
id: bms${bms_id}_min_voltage_cell
name: "${name} ${bms_name} cell voltage min cell number"
max_cell_index:
id: bms${bms_id}_max_voltage_cell
name: "${name} ${bms_name} cell voltage max cell number"
delta_cell_voltage:
id: bms${bms_id}_delta_voltage_cell
name: "${name} ${bms_name} cell delta voltage"
cell_voltage_01:
name: "${name} ${bms_name} cell voltage 01"
cell_voltage_02:
name: "${name} ${bms_name} cell voltage 02"
cell_voltage_03:
name: "${name} ${bms_name} cell voltage 03"
cell_voltage_04:
name: "${name} ${bms_name} cell voltage 04"
cell_voltage_05:
name: "${name} ${bms_name} cell voltage 05"
cell_voltage_06:
name: "${name} ${bms_name} cell voltage 06"
cell_voltage_07:
name: "${name} ${bms_name} cell voltage 07"
cell_voltage_08:
name: "${name} ${bms_name} cell voltage 08"
cell_voltage_09:
name: "${name} ${bms_name} cell voltage 09"
cell_voltage_10:
name: "${name} ${bms_name} cell voltage 10"
cell_voltage_11:
name: "${name} ${bms_name} cell voltage 11"
cell_voltage_12:
name: "${name} ${bms_name} cell voltage 12"
cell_voltage_13:
name: "${name} ${bms_name} cell voltage 13"
cell_voltage_14:
name: "${name} ${bms_name} cell voltage 14"
cell_voltage_15:
name: "${name} ${bms_name} cell voltage 15"
cell_voltage_16:
name: "${name} ${bms_name} cell voltage 16"
# Protection parameters
CELL_OV_Start:
name: "${name} ${bms_name} CELL_OV_Start"
CELL_OV_Delay:
name: "${name} ${bms_name} CELL_OV_Delay"
CELL_OV_Stop:
name: "${name} ${bms_name} CELL_OV_Stop"
CELL_UV_Start:
name: "${name} ${bms_name} CELL_UV_Start"
CELL_UV_Delay:
name: "${name} ${bms_name} CELL_UV_Delay"
CELL_UV_Stop:
name: "${name} ${bms_name} CELL_UV_Stop"
PACK_OV_Start:
name: "${name} ${bms_name} PACK_OV_Start"
PACK_OV_Delay:
name: "${name} ${bms_name} PACK_OV_Delay"
PACK_OV_Stop:
name: "${name} ${bms_name} PACK_OV_Stop"
PACK_UV_Start:
name: "${name} ${bms_name} PACK_UV_Start"
PACK_UV_Delay:
name: "${name} ${bms_name} PACK_UV_Delay"
PACK_UV_Stop:
name: "${name} ${bms_name} PACK_UV_Stop"
Const_Pack_V:
name: "${name} ${bms_name} Const_Pack_V"
Const_Current:
name: "${name} ${bms_name} Const_Current"
CHG_OC1_Start:
name: "${name} ${bms_name} CHG_OC1_Start"
CHG_OC1_Delay:
name: "${name} ${bms_name} CHG_OC1_Delay"
DISC_OC1_Start:
name: "${name} ${bms_name} DISC_OC1_Start"
DISC_OC1_Delay:
name: "${name} ${bms_name} DISC_OC1_Delay"
CHG_OC2_Start:
name: "${name} ${bms_name} CHG_OC2_Start"
CHG_OC2_Delay:
name: "${name} ${bms_name} CHG_OC2_Delay"
DISC_OC2_Start:
name: "${name} ${bms_name} DISC_OC2_Start"
DISC_OC2_Delay:
name: "${name} ${bms_name} DISC_OC2_Delay"
CHG_OT_START:
name: "${name} ${bms_name} CHG_OT_START"
CHG_OT_Delay:
name: "${name} ${bms_name} CHG_OT_Delay"
CHG_OT_STOP:
name: "${name} ${bms_name} CHG_OT_STOP"
DISC_OT_START:
name: "${name} ${bms_name} DISC_OT_START"
DISC_OT_Delay:
name: "${name} ${bms_name} DISC_OT_Delay"
DISC_OT_STOP:
name: "${name} ${bms_name} DISC_OT_STOP"
CHG_UT_START:
name: "${name} ${bms_name} CHG_UT_START"
CHG_UT_Delay:
name: "${name} ${bms_name} CHG_UT_Delay"
CHG_UT_STOP:
name: "${name} ${bms_name} CHG_UT_STOP"
DISC_UT_START:
name: "${name} ${bms_name} DISC_UT_START"
DISC_UT_Delay:
name: "${name} ${bms_name} DISC_UT_Delay"
DISC_UT_STOP:
name: "${name} ${bms_name} DISC_UT_STOP"
MOS_OT_START:
name: "${name} ${bms_name} MOS_OT_START"
MOS_OT_Delay:
name: "${name} ${bms_name} MOS_OT_Delay"
MOS_OT_STOP:
name: "${name} ${bms_name} MOS_OT_STOP"
ENV_OT_START:
name: "${name} ${bms_name} ENV_OT_START"
ENV_OT_Delay:
name: "${name} ${bms_name} ENV_OT_Delay"
ENV_OT_STOP:
name: "${name} ${bms_name} ENV_OT_STOP"
ENV_UT_START:
name: "${name} ${bms_name} ENV_UT_START"
ENV_UT_Delay:
name: "${name} ${bms_name} ENV_UT_Delay"
ENV_UT_STOP:
name: "${name} ${bms_name} ENV_UT_STOP"
Balance_Start_Vol:
id: bms${bms_id}_balance_trigger_voltage
name: "${name} ${bms_name} balancing trigger voltage"
Balance_Start_Diff:
id: bms${bms_id}_balance_trigger_difference
name: "${name} ${bms_name} Balance_Start_Diff"
Sleep_Cell_Volt:
name: "${name} ${bms_name} Sleep_Cell_Volt"
Shorts_Delay:
name: "${name} ${bms_name} Shorts_Delay"
Standby_Time:
name: "${name} ${bms_name} Standby_Time"
UV_OFF_Time:
name: "${name} ${bms_name} UV_OFF_Time"
LC_Style:
name: "${name} ${bms_name} LC_Style"
Sleep_Time:
name: "${name} ${bms_name} Sleep_Time"
# Alarm parameters
CELL_OV_Start_Alarm:
id: bms${bms_id}_cell_ovp
name: "${name} ${bms_name} cell overvoltage protection"
CELL_OV_Delay_Alarm:
name: "${name} ${bms_name} CELL_OV_Delay_Alarm"
CELL_OV_Stop_Alarm:
id: bms${bms_id}_cell_ovpr
name: "${name} ${bms_name} cell overvoltage protection recovery"
CELL_UV_Start_Alarm:
id: bms${bms_id}_cell_uvp
name: "${name} ${bms_name} cell undervoltage protection"
CELL_UV_Delay_Alarm:
name: "${name} ${bms_name} CELL_UV_Delay_Alarm"
CELL_UV_Stop_Alarm:
id: bms${bms_id}_cell_uvpr
name: "${name} ${bms_name} cell undervoltage protection recovery"
PACK_OV_Start_Alarm:
name: "${name} ${bms_name} PACK_OV_Start_Alarm"
PACK_OV_Delay_Alarm:
name: "${name} ${bms_name} PACK_OV_Delay_Alarm"
PACK_OV_Stop_Alarm:
name: "${name} ${bms_name} PACK_OV_Stop_Alarm"
PACK_UV_Start_Alarm:
name: "${name} ${bms_name} PACK_UV_Start_Alarm"
PACK_UV_Delay_Alarm:
name: "${name} ${bms_name} PACK_UV_Delay_Alarm"
PACK_UV_Stop_Alarm:
name: "${name} ${bms_name} PACK_UV_Stop_Alarm"
CHG_OC_Start_Alarm:
id: bms${bms_id}_max_charge_current
name: "${name} ${bms_name} max charging current"
CHG_OC_Delay_Alarm:
name: "${name} ${bms_name} CHG_OC_Delay_Alarm"
CHG_OC_Stop_Alarm:
name: "${name} ${bms_name} CHG_OC_Stop_Alarm"
DISC_OC_Start_Alarm:
id: bms${bms_id}_max_discharge_current
name: "${name} ${bms_name} max discharging current"
DISC_OC_Delay_Alarm:
name: "${name} ${bms_name} DISC_OC_Delay_Alarm"
DISC_OC_Stop_Alarm:
name: "${name} ${bms_name} DISC_OC_Stop_Alarm"
CHG_OT_START_Alarm:
name: "${name} ${bms_name} CHG_OT_START_Alarm"
CHG_OT_Delay_Alarm:
name: "${name} ${bms_name} CHG_OT_Delay_Alarm"
CHG_OT_STOP_Alarm:
name: "${name} ${bms_name} CHG_OT_STOP_Alarm"
CHG_UT_START_Alarm:
name: "${name} ${bms_name} CHG_UT_START_Alarm"
CHG_UT_Delay_Alarm:
name: "${name} ${bms_name} CHG_UT_Delay_Alarm"
CHG_UT_STOP_Alarm:
name: "${name} ${bms_name} CHG_UT_STOP_Alarm"
DISC_OT_START_Alarm:
name: "${name} ${bms_name} DISC_OT_START_Alarm"
DISC_OT_Delay_Alarm:
name: "${name} ${bms_name} DISC_OT_Delay_Alarm"
DISC_OT_STOP_Alarm:
name: "${name} ${bms_name} DISC_OT_STOP_Alarm"
DISC_UT_START_Alarm:
name: "${name} ${bms_name} DISC_UT_START_Alarm"
DISC_UT_Delay_Alarm:
name: "${name} ${bms_name} DISC_UT_Delay_Alarm"
DISC_UT_STOP_Alarm:
name: "${name} ${bms_name} DISC_UT_STOP_Alarm"
MOS_OT_START_Alarm:
name: "${name} ${bms_name} MOS_OT_START_Alarm"
MOS_OT_Delay_Alarm:
name: "${name} ${bms_name} MOS_OT_Delay_Alarm"
MOS_OT_STOP_Alarm:
name: "${name} ${bms_name} MOS_OT_STOP_Alarm"
ENV_OT_START_Alarm:
name: "${name} ${bms_name} ENV_OT_START_Alarm"
ENV_OT_Delay_Alarm:
name: "${name} ${bms_name} ENV_OT_Delay_Alarm"
ENV_OT_STOP_Alarm:
name: "${name} ${bms_name} ENV_OT_STOP_Alarm"
ENV_UT_START_Alarm:
name: "${name} ${bms_name} ENV_UT_START_Alarm"
ENV_UT_Delay_Alarm:
name: "${name} ${bms_name} ENV_UT_Delay_Alarm"
ENV_UT_STOP_Alarm:
name: "${name} ${bms_name} ENV_UT_STOP_Alarm"
Capacity_Low_Start_Alarm:
name: "${name} ${bms_name} Capacity_Low_Start_Alarm"
Capacity_Low_Stop_Alarm:
name: "${name} ${bms_name} Capacity_Low_Stop_Alarm"
Vol_Diff_Start_Alarm:
name: "${name} ${bms_name} Vol_Diff_Start_Alarm"
Vol_Diff_Stop_Alarm:
name: "${name} ${bms_name} Vol_Diff_Stop_Alarm"
# Charging cycle capacity - Calculated from charging cycles and battery capacity
- platform: template
id: bms${bms_id}_cycle_capacity_raw
name: "${name} ${bms_name} charging cycle capacity"
update_interval: ${bms_update_interval}
unit_of_measurement: Ah
state_class: total
icon: mdi:car-battery
accuracy_decimals: 0
internal: true
filters:
- or:
- throttle: 10s
- delta: 1
lambda: return id(bms${bms_id}_charging_cycles_raw).state * id(bms${bms_id}_battery_capacity).state;
# Charging power: Calculated from voltage and current
- platform: template
name: "${name} ${bms_name} battery power charging"
id: bms${bms_id}_charging_power
unit_of_measurement: 'W'
device_class: 'current'
state_class: 'measurement'
accuracy_decimals: 0
lambda: |-
if (id(bms${bms_id}_current).state > 0) return id(bms${bms_id}_total_voltage).state * id(bms${bms_id}_current).state;
else return 0;
# Discharging power: Calculated from voltage and current
- platform: template
name: "${name} ${bms_name} battery power discharging"
id: bms${bms_id}_discharging_power
unit_of_measurement: 'W'
device_class: 'current'
state_class: 'measurement'
accuracy_decimals: 0
lambda: |-
if (id(bms${bms_id}_current).state < 0) return id(bms${bms_id}_total_voltage).state * -id(bms${bms_id}_current).state;
else return 0;
# Remaining capacity: Calculated from capacity and SoC
- platform: template
unit_of_measurement: 'Ah'
device_class: 'battery'
state_class: 'measurement'
accuracy_decimals: 0
id: bms${bms_id}_capacity_remaining_ah
name: "${name} ${bms_name} battery capacity remaining"
lambda: |-
return (id(bms${bms_id}_state_of_charge).state * id(bms${bms_id}_battery_capacity).state) / 100;
filters:
- or:
- throttle: 10s
- delta: 1
text_sensor:
- platform: basen_bms
basen_bms_id: basen_bms_id${bms_id}
bms_version:
name: "${name} ${bms_name} BMS version"
barcode:
name: "${name} ${bms_name} BMS barcode"
status_bitmask:
id: bms${bms_id}_status_bitmask
name: "${name} ${bms_name} status bitmask"
status:
name: "${name} ${bms_name} Status"
cell_balancing_bitmask:
name: "${name} ${bms_name} cell balancing bitmask"
@@ -1,5 +1,5 @@
# Updated : 2025.05.05
# Version : 1.1.2
# Updated : 2025.06.11
# Version : 1.1.3
# GitHub : https://github.com/GHswitt/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -17,12 +17,15 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
# +-----------------------------------------------+
# | DEYE CAN PCS module frames |
# | Thanks to: |
# | https://github.com/Psynosaur/esphome-deye-bms |
# +-----------------------------------------------+
packages:
bms_base: !include bms_base.yaml
bms_errors_bitmask: !include bms_errors_bitmask_DEYE_CAN.yaml
# +-----------------------------------------------+
# | DEYE CAN PCS module frames |
# | Thanks to: |
# | https://github.com/Psynosaur/esphome-deye-bms |
# +-----------------------------------------------+
canbus:
- id: !extend ${canbus_id}
@@ -36,7 +39,7 @@ canbus:
id(bms${bms_id}_charge_mos_state).publish_state(x[7] & 0x10);
id(bms${bms_id}_parallel_finish).publish_state(x[7] & 0x1);
- can_id: 0x15${deye_module_id}
- can_id: 0x15${deye_module_id}
then:
- lambda: |-
float voltage = ((x[1] << 8) | x[0]) / 10.0;
@@ -61,9 +64,9 @@ canbus:
id(bms${bms_id}_max_temperature).publish_state(temp_max);
float temp_min = ((x[7] << 8) | x[6]) / 10.0;
id(bms${bms_id}_min_temperature).publish_state(temp_min);
# ESP_LOGI("canid 0x200:", "U cell max: %.3f V, U cell min %.3f V, Temp max: %.1f, T_min %.1f V", cell_u_max, cell_u_min, temp_max, temp_min );
# ESP_LOGI("canid 0x200:", "U cell max: %.3f V, U cell min %.3f V, Temp max: %.1f, T_min %.1f V", cell_u_max, cell_u_min, temp_max, temp_min );
- can_id: 0x25${deye_module_id}
- can_id: 0x25${deye_module_id}
then:
- lambda: |-
float mosmax = ((x[1] << 8) | x[0]) / 10.0;
@@ -81,14 +84,14 @@ canbus:
- can_id: 0x40${deye_module_id}
then:
- lambda: |-
// Process frame
// Process frame
id(bms${bms_id}_operation_mode_internal).publish_state(x[0]);
if(x[1] == 0) id(bms${bms_id}_fault_level).publish_state("no fault");
if(x[1] == 1) id(bms${bms_id}_fault_level).publish_state("minor fault");
if(x[1] == 2) id(bms${bms_id}_fault_level).publish_state("serious fault");
id(bms${bms_id}_fault).publish_state(x[1] & 3);
float cycles = ((x[3] << 8) | x[2]);
id(bms${bms_id}_charging_cycles).publish_state(cycles);
id(bms${bms_id}_charging_cycles_raw).publish_state(cycles);
// Set cell balancing states based on x[4] and x[5]
//for (int i = 1; i <= 8; i++) {
// std::to_string(high_position).c_str()
@@ -120,20 +123,20 @@ canbus:
- lambda: |-
float charged = ((x[3] << 24) | (x[2] << 16) | (x[1] << 8) | x[0]) / 1000.0;
id(bms${bms_id}_charged).publish_state(charged);
float discharged = ((x[7] << 24) | (x[6] << 16) | (x[5] << 8) | x[5]) / 1000.0;
float discharged = ((x[7] << 24) | (x[6] << 16) | (x[5] << 8) | x[4]) / 1000.0;
id(bms${bms_id}_discharged).publish_state(discharged);
# ESP_LOGI("canid 0x550:", "%.3f kWh, %.3f kWh", charged, discharged );
# ESP_LOGI("canid 0x550:", "%02x %02x %02x %02x %02x %02x %02x %02x", x[0], x[1], x[2], x[3], x[4], x[5], x[6], x[7]);
- can_id: 0x70${deye_module_id}
then:
- lambda: |
- lambda: |
id(bms${bms_id}_charge_over_voltage_count).publish_state((x[1] << 8) | x[0]);
id(bms${bms_id}_discharge_under_voltage_count).publish_state((x[3] << 8) | x[2]);
id(bms${bms_id}_short_circuit_count).publish_state((x[5] << 8) | x[4]);
id(bms${bms_id}_mos_over_temp_count).publish_state((x[7] << 8) | x[6]);
- can_id: 0x75${deye_module_id}
then:
- lambda: |-
@@ -141,7 +144,7 @@ canbus:
id(bms${bms_id}_discharge_over_current_count).publish_state((x[3] << 8) | x[2]);
id(bms${bms_id}_charge_over_temp_count).publish_state((x[5] << 8) | x[4]);
id(bms${bms_id}_discharge_over_temp_count).publish_state((x[7] << 8) | x[6]);
binary_sensor:
# Online status: TODO
- platform: template
@@ -159,14 +162,14 @@ binary_sensor:
name: "${name} ${bms_name} status balancing"
filters:
- delayed_off: 300s
# Charging allowed
- platform: template
id: bms${bms_id}_charging_allowed
name: "${name} ${bms_name} charging allowed"
lambda: |-
return id(bms${bms_id}_charge_mos_state).state && !id(bms${bms_id}_fault).state;
# Discharging allowed
- platform: template
id: bms${bms_id}_discharging_allowed
@@ -177,15 +180,15 @@ binary_sensor:
# Fault
- platform: template
name: "${name} ${bms_name} fault"
id: "bms${bms_id}_fault"
id: "bms${bms_id}_fault"
- platform: template
id: "bms${bms_id}_heat_mos_state"
name: "${name} ${bms_name} status heating"
- platform: template
name: "${name} ${bms_name} precharge mos state"
id: "bms${bms_id}_precharge_mos_state"
id: "bms${bms_id}_precharge_mos_state"
- platform: template
name: "${name} ${bms_name} discharge mos state"
@@ -198,7 +201,7 @@ binary_sensor:
- platform: template
name: "${name} ${bms_name} parallel finish"
id: "bms${bms_id}_parallel_finish"
- platform: template
name: "${name} ${bms_name} cell 01 balancing"
id: "bms${bms_id}_cell_1_balancing"
@@ -285,7 +288,7 @@ sensor:
device_class: 'current'
state_class: 'measurement'
accuracy_decimals: 1
# Battery power (calculated)
- platform: template
id: bms${bms_id}_power
@@ -296,7 +299,7 @@ sensor:
accuracy_decimals: 0
lambda: |-
return id(bms${bms_id}_total_voltage).state * id(bms${bms_id}_current).state;
# Charging power: Calculated from voltage and current
- platform: template
name: "${name} ${bms_name} battery power charging"
@@ -308,8 +311,8 @@ sensor:
lambda: |-
if (id(bms${bms_id}_current).state > 0) return id(bms${bms_id}_total_voltage).state * id(bms${bms_id}_current).state;
else return 0;
# Discharging power: Calculated from voltage and current
# Discharging power: Calculated from voltage and current
- platform: template
name: "${name} ${bms_name} battery power discharging"
id: bms${bms_id}_discharging_power
@@ -320,7 +323,7 @@ sensor:
lambda: |-
if (id(bms${bms_id}_current).state < 0) return id(bms${bms_id}_total_voltage).state * -id(bms${bms_id}_current).state;
else return 0;
# SoC
- platform: template
name: "${name} ${bms_name} SoC"
@@ -329,8 +332,8 @@ sensor:
device_class: 'battery'
state_class: 'measurement'
accuracy_decimals: 1
# Battery capacity
# Battery capacity
- platform: template
name: "${name} ${bms_name} battery capacity"
id: bms${bms_id}_battery_capacity
@@ -342,8 +345,8 @@ sensor:
uint8_t module_count = id(deye${deye_id}_module_amount).state;
if (module_count < 1) module_count = 1;
return id(deye${deye_id}_battery_capacity).state / module_count;
# Remaining capacity: Calculated from capacity and SoC
# Remaining capacity - Calculated from SoC and battery capacity
- platform: template
unit_of_measurement: 'Ah'
device_class: 'battery'
@@ -351,24 +354,42 @@ sensor:
accuracy_decimals: 0
id: bms${bms_id}_capacity_remaining_ah
name: "${name} ${bms_name} battery capacity remaining"
lambda: |-
return (id(bms${bms_id}_state_of_charge).state * id(bms${bms_id}_battery_capacity).state) / 100;
filters:
- or:
- throttle: 10s
- delta: 1
lambda: |-
return (id(bms${bms_id}_state_of_charge).state * id(bms${bms_id}_battery_capacity).state) / 100;
# Charging cycles
- platform: template
name: "${name} ${bms_name} cycles"
id: "bms${bms_id}_charging_cycles"
name: "${name} ${bms_name} charging cycles"
id: "bms${bms_id}_charging_cycles_raw"
internal: true
state_class: 'measurement'
accuracy_decimals: 0
filters:
- or:
- throttle: 600s
- delta: 1
# Charging cycle capacity - Calculated from charging cycles and battery capacity
- platform: template
name: "${name} ${bms_name} charging cycle capacity"
id: "bms${bms_id}_cycle_capacity_raw"
internal: true
update_interval: ${bms_update_interval}
unit_of_measurement: Ah
state_class: 'measurement'
accuracy_decimals: 0
icon: mdi:car-battery
filters:
- or:
- throttle: 600s
- delta: 1
lambda: |-
return id(bms${bms_id}_charging_cycles_raw).state * id(bms${bms_id}_battery_capacity).state;
# Max. charge current
- platform: template
name: "${name} ${bms_name} max charge current"
@@ -378,7 +399,7 @@ sensor:
state_class: 'measurement'
accuracy_decimals: 0
# Max. discharge current
# Max. discharge current
- platform: template
name: "${name} ${bms_name} max discharge current"
id: "bms${bms_id}_max_discharge_current"
@@ -386,7 +407,7 @@ sensor:
device_class: 'current'
state_class: 'measurement'
accuracy_decimals: 0
# Max. cell voltage
- platform: template
name: "${name} ${bms_name} max cell voltage"
@@ -394,7 +415,7 @@ sensor:
unit_of_measurement: 'V'
device_class: 'voltage'
state_class: 'measurement'
accuracy_decimals: 3
accuracy_decimals: 3
# Max. voltage cell: Only with InterCAN enabled
- platform: template
@@ -403,7 +424,7 @@ sensor:
id: bms${bms_id}_max_voltage_cell
name: "${name} ${bms_name} cell voltage max cell number"
lambda: return 0;
# Min. cell voltage
- platform: template
name: "${name} ${bms_name} min cell voltage"
@@ -414,7 +435,7 @@ sensor:
accuracy_decimals: 3
on_value:
then:
- component.update: bms${bms_id}_imbalance
- component.update: bms${bms_id}_imbalance
# Min. voltage cell: Only with InterCAN enabled
- platform: template
@@ -423,7 +444,7 @@ sensor:
id: bms${bms_id}_min_voltage_cell
name: "${name} ${bms_name} cell voltage min cell number"
lambda: return 0;
# Min. temperature
- platform: template
name: "${name} ${bms_name} temp min"
@@ -432,8 +453,8 @@ sensor:
device_class: 'temperature'
state_class: 'measurement'
accuracy_decimals: 1
# MIN temperature sensor (fixed)
# Min. temperature sensor (fixed)
- platform: template
id: bms${bms_id}_min_temperature_sensor
name: "${name} ${bms_name} min temperature sensor"
@@ -442,7 +463,7 @@ sensor:
icon: mdi:numeric
lambda: |-
return (1 + ${bms_id} * 100 + ${deye_module_id}1);
# Max. temperature
- platform: template
name: "${name} ${bms_name} temp max"
@@ -451,8 +472,8 @@ sensor:
device_class: 'temperature'
state_class: 'measurement'
accuracy_decimals: 1
# MAX temperature sensor (fixed)
# Max. temperature sensor (fixed)
- platform: template
id: bms${bms_id}_max_temperature_sensor
name: "${name} ${bms_name} max temperature sensor"
@@ -461,32 +482,32 @@ sensor:
icon: mdi:numeric
lambda: |-
return (1 + ${bms_id} * 100 + ${deye_module_id}1);
# Cell OVP: Unsupported
- platform: template
unit_of_measurement: 'V'
state_class: 'measurement'
accuracy_decimals: 2
accuracy_decimals: 2
id: bms${bms_id}_cell_ovp
name: "${name} ${bms_name} cell overvoltage protection"
lambda: |-
return 3.7;
# Cell UVP: Unsupported
- platform: template
unit_of_measurement: 'V'
state_class: 'measurement'
accuracy_decimals: 2
accuracy_decimals: 2
id: bms${bms_id}_cell_uvp
name: "${name} ${bms_name} cell undervoltage protection"
lambda: |-
return 2.8;
# Cell balance trigger voltage: Unsupported
- platform: template
unit_of_measurement: 'V'
state_class: 'measurement'
accuracy_decimals: 2
accuracy_decimals: 2
id: bms${bms_id}_balance_trigger_voltage
name: "${name} ${bms_name} balance trigger voltage"
lambda: |-
@@ -497,44 +518,44 @@ sensor:
name: "${name} ${bms_name} counts of charge over voltage "
id: "bms${bms_id}_charge_over_voltage_count"
state_class: 'measurement'
accuracy_decimals: 0
accuracy_decimals: 0
- platform: template
name: "${name} ${bms_name} counts of discharge under voltage"
id: "bms${bms_id}_discharge_under_voltage_count"
state_class: 'measurement'
accuracy_decimals: 0
accuracy_decimals: 0
- platform: template
name: "${name} ${bms_name} counts of short circuit"
id: "bms${bms_id}_short_circuit_count"
state_class: 'measurement'
accuracy_decimals: 0
accuracy_decimals: 0
- platform: template
name: "${name} ${bms_name} counts of mos over temp"
id: "bms${bms_id}_mos_over_temp_count"
state_class: 'measurement'
accuracy_decimals: 0
accuracy_decimals: 0
- platform: template
name: "${name} ${bms_name} counts of charge over current"
id: "bms${bms_id}_charge_over_current_count"
state_class: 'measurement'
accuracy_decimals: 0
accuracy_decimals: 0
- platform: template
name: "${name} ${bms_name} counts of discharge under current"
id: "bms${bms_id}_discharge_over_current_count"
state_class: 'measurement'
accuracy_decimals: 0
accuracy_decimals: 0
- platform: template
name: "${name} ${bms_name} counts of charge over temp"
id: "bms${bms_id}_charge_over_temp_count"
state_class: 'measurement'
accuracy_decimals: 0
accuracy_decimals: 0
- platform: template
name: "${name} ${bms_name} counts of discharge over temp"
id: "bms${bms_id}_discharge_over_temp_count"
@@ -555,7 +576,7 @@ sensor:
unit_of_measurement: 'mV'
device_class: 'voltage'
state_class: 'measurement'
accuracy_decimals: 0
accuracy_decimals: 0
lambda: |-
return ((id(bms${bms_id}_max_cell_voltage).state - id(bms${bms_id}_min_cell_voltage).state)) * 1000;
@@ -583,7 +604,7 @@ sensor:
state_class: 'total_increasing'
accuracy_decimals: 3
filters:
- throttle: 1s
- throttle: 1s
- platform: template
name: "${name} ${bms_name} discharged"
@@ -594,7 +615,7 @@ sensor:
accuracy_decimals: 3
filters:
- throttle: 1s
- platform: template
id: "bms${bms_id}_operation_mode_internal"
filters:
@@ -614,5 +635,5 @@ text_sensor:
- platform: template
name: "${name} ${bms_name} fault level"
id: "bms${bms_id}_fault_level"
id: "bms${bms_id}_fault_level"
@@ -1,5 +1,5 @@
# Updated : 2025.04.14
# Version : 1.1.1
# Updated : 2025.06.11
# Version : 1.1.2
# GitHub : https://github.com/GHswitt/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -17,12 +17,15 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
# +-----------------------------------------------+
# | DEYE CAN PCS module frames |
# | Thanks to: |
# | https://github.com/Psynosaur/esphome-deye-bms |
# +-----------------------------------------------+
packages:
bms_base: !include bms_base.yaml
bms_errors_bitmask: !include bms_errors_bitmask_DEYE_CAN.yaml
# +-----------------------------------------------+
# | DEYE CAN PCS module frames |
# | Thanks to: |
# | https://github.com/Psynosaur/esphome-deye-bms |
# +-----------------------------------------------+
canbus:
- id: !extend ${canbus_id}
@@ -34,7 +37,7 @@ canbus:
id(bms${bms_id}_discharge_mos_state).publish_state(x[7] & 0x20);
id(bms${bms_id}_charge_mos_state).publish_state(x[7] & 0x10);
- can_id: 0x15${deye_module_id}
- can_id: 0x15${deye_module_id}
then:
- lambda: |-
float voltage = ((x[1] << 8) | x[0]) / 10.0;
@@ -59,9 +62,9 @@ canbus:
id(bms${bms_id}_max_temperature).publish_state(temp_max);
float temp_min = ((x[7] << 8) | x[6]) / 10.0;
id(bms${bms_id}_min_temperature).publish_state(temp_min);
# ESP_LOGI("canid 0x200:", "U cell max: %.3f V, U cell min %.3f V, Temp max: %.1f, T_min %.1f V", cell_u_max, cell_u_min, temp_max, temp_min );
# ESP_LOGI("canid 0x200:", "U cell max: %.3f V, U cell min %.3f V, Temp max: %.1f, T_min %.1f V", cell_u_max, cell_u_min, temp_max, temp_min );
- can_id: 0x25${deye_module_id}
- can_id: 0x25${deye_module_id}
then:
- lambda: |-
int val3 = ((x[5] << 8) | x[4]);
@@ -72,13 +75,13 @@ canbus:
- can_id: 0x40${deye_module_id}
then:
- lambda: |-
// Process frame
// Process frame
if(x[1] == 0) id(bms${bms_id}_fault_level).publish_state("no fault");
if(x[1] == 1) id(bms${bms_id}_fault_level).publish_state("minor fault");
if(x[1] == 2) id(bms${bms_id}_fault_level).publish_state("serious fault");
id(bms${bms_id}_fault).publish_state(x[1] & 3);
float cycles = ((x[3] << 8) | x[2]);
id(bms${bms_id}_charging_cycles).publish_state(cycles);
id(bms${bms_id}_charging_cycles_raw).publish_state(cycles);
id(bms${bms_id}_equalizing).publish_state(x[4] | x[5]);
- can_id: 0x55${deye_module_id}
@@ -86,9 +89,9 @@ canbus:
- lambda: |-
float charged = ((x[3] << 24) | (x[2] << 16) | (x[1] << 8) | x[0]) / 1000.0;
id(bms${bms_id}_charged).publish_state(charged);
float discharged = ((x[7] << 24) | (x[6] << 16) | (x[5] << 8) | x[5]) / 1000.0;
float discharged = ((x[7] << 24) | (x[6] << 16) | (x[5] << 8) | x[4]) / 1000.0;
id(bms${bms_id}_discharged).publish_state(discharged);
binary_sensor:
# Online status: TODO
- platform: template
@@ -106,14 +109,14 @@ binary_sensor:
name: "${name} ${bms_name} status balancing"
filters:
- delayed_off: 300s
# Charging allowed
- platform: template
id: bms${bms_id}_charging_allowed
name: "${name} ${bms_name} charging allowed"
lambda: |-
return id(bms${bms_id}_charge_mos_state).state && !id(bms${bms_id}_fault).state;
# Discharging allowed
- platform: template
id: bms${bms_id}_discharging_allowed
@@ -124,11 +127,11 @@ binary_sensor:
# Fault
- platform: template
name: "${name} ${bms_name} fault"
id: "bms${bms_id}_fault"
id: "bms${bms_id}_fault"
- platform: template
name: "${name} ${bms_name} precharge mos state"
id: "bms${bms_id}_precharge_mos_state"
id: "bms${bms_id}_precharge_mos_state"
- platform: template
name: "${name} ${bms_name} discharge mos state"
@@ -160,7 +163,7 @@ sensor:
device_class: 'current'
state_class: 'measurement'
accuracy_decimals: 1
# Battery power (calculated)
- platform: template
id: bms${bms_id}_power
@@ -171,7 +174,7 @@ sensor:
accuracy_decimals: 0
lambda: |-
return id(bms${bms_id}_total_voltage).state * id(bms${bms_id}_current).state;
# Charging power: Calculated from voltage and current
- platform: template
name: "${name} ${bms_name} battery power charging"
@@ -183,8 +186,8 @@ sensor:
lambda: |-
if (id(bms${bms_id}_current).state > 0) return id(bms${bms_id}_total_voltage).state * id(bms${bms_id}_current).state;
else return 0;
# Discharging power: Calculated from voltage and current
# Discharging power: Calculated from voltage and current
- platform: template
name: "${name} ${bms_name} battery power discharging"
id: bms${bms_id}_discharging_power
@@ -195,7 +198,7 @@ sensor:
lambda: |-
if (id(bms${bms_id}_current).state < 0) return id(bms${bms_id}_total_voltage).state * -id(bms${bms_id}_current).state;
else return 0;
# SoC
- platform: template
name: "${name} ${bms_name} SoC"
@@ -204,8 +207,8 @@ sensor:
device_class: 'battery'
state_class: 'measurement'
accuracy_decimals: 1
# Battery capacity
# Battery capacity
- platform: template
name: "${name} ${bms_name} battery capacity"
id: bms${bms_id}_battery_capacity
@@ -217,7 +220,7 @@ sensor:
uint8_t module_count = id(deye${deye_id}_module_amount).state;
if (module_count < 1) module_count = 1;
return id(deye${deye_id}_battery_capacity).state / module_count;
# Remaining capacity: Calculated from capacity and SoC
- platform: template
unit_of_measurement: 'Ah'
@@ -232,18 +235,36 @@ sensor:
- or:
- throttle: 10s
- delta: 1
# Charging cycles
- platform: template
name: "${name} ${bms_name} cycles"
id: "bms${bms_id}_charging_cycles"
name: "${name} ${bms_name} charging cycles"
id: "bms${bms_id}_charging_cycles_raw"
internal: true
state_class: 'measurement'
accuracy_decimals: 0
filters:
- or:
- throttle: 600s
- delta: 1
# Charging cycle capacity - Calculated from charging cycles and battery capacity
- platform: template
name: "${name} ${bms_name} charging cycle capacity"
id: "bms${bms_id}_cycle_capacity_raw"
internal: true
update_interval: ${bms_update_interval}
unit_of_measurement: Ah
state_class: 'measurement'
accuracy_decimals: 0
icon: mdi:car-battery
filters:
- or:
- throttle: 600s
- delta: 1
lambda: |-
return id(bms${bms_id}_charging_cycles_raw).state * id(bms${bms_id}_battery_capacity).state;
# Max. charge current
- platform: template
name: "${name} ${bms_name} max charge current"
@@ -253,7 +274,7 @@ sensor:
state_class: 'measurement'
accuracy_decimals: 0
# Max. discharge current
# Max. discharge current
- platform: template
name: "${name} ${bms_name} max discharge current"
id: "bms${bms_id}_max_discharge_current"
@@ -261,7 +282,7 @@ sensor:
device_class: 'current'
state_class: 'measurement'
accuracy_decimals: 0
# Max. cell voltage
- platform: template
name: "${name} ${bms_name} max cell voltage"
@@ -269,7 +290,7 @@ sensor:
unit_of_measurement: 'V'
device_class: 'voltage'
state_class: 'measurement'
accuracy_decimals: 3
accuracy_decimals: 3
# Max. voltage cell: Only with InterCAN enabled
- platform: template
@@ -279,7 +300,7 @@ sensor:
name: "${name} ${bms_name} cell voltage max cell number"
filters:
- lambda: return 0;
# Min. cell voltage
- platform: template
name: "${name} ${bms_name} min cell voltage"
@@ -290,7 +311,7 @@ sensor:
accuracy_decimals: 3
on_value:
then:
- component.update: bms${bms_id}_imbalance
- component.update: bms${bms_id}_imbalance
# Min. voltage cell: Only with InterCAN enabled
- platform: template
@@ -300,7 +321,7 @@ sensor:
name: "${name} ${bms_name} cell voltage min cell number"
filters:
- lambda: return 0;
# Min. temperature
- platform: template
name: "${name} ${bms_name} temp min"
@@ -309,8 +330,8 @@ sensor:
device_class: 'temperature'
state_class: 'measurement'
accuracy_decimals: 1
# MIN temperature sensor (fixed)
# Min. temperature sensor (fixed)
- platform: template
id: bms${bms_id}_min_temperature_sensor
name: "${name} ${bms_name} min temperature sensor"
@@ -319,7 +340,7 @@ sensor:
icon: mdi:numeric
lambda: |-
return (1 + ${bms_id} * 100 + ${deye_module_id}1);
# Max. temperature
- platform: template
name: "${name} ${bms_name} temp max"
@@ -328,8 +349,8 @@ sensor:
device_class: 'temperature'
state_class: 'measurement'
accuracy_decimals: 1
# MAX temperature sensor (fixed)
# Max. temperature sensor (fixed)
- platform: template
id: bms${bms_id}_max_temperature_sensor
name: "${name} ${bms_name} max temperature sensor"
@@ -338,32 +359,32 @@ sensor:
icon: mdi:numeric
lambda: |-
return (1 + ${bms_id} * 100 + ${deye_module_id}1);
# Cell OVP: Unsupported
- platform: template
unit_of_measurement: 'V'
state_class: 'measurement'
accuracy_decimals: 2
accuracy_decimals: 2
id: bms${bms_id}_cell_ovp
name: "${name} ${bms_name} cell overvoltage protection"
lambda: |-
return 3.7;
# Cell UVP: Unsupported
- platform: template
unit_of_measurement: 'V'
state_class: 'measurement'
accuracy_decimals: 2
accuracy_decimals: 2
id: bms${bms_id}_cell_uvp
name: "${name} ${bms_name} cell undervoltage protection"
lambda: |-
return 2.8;
# Cell balance trigger voltage: Unsupported
- platform: template
unit_of_measurement: 'V'
state_class: 'measurement'
accuracy_decimals: 2
accuracy_decimals: 2
id: bms${bms_id}_balance_trigger_voltage
name: "${name} ${bms_name} balance trigger voltage"
lambda: |-
@@ -384,7 +405,7 @@ sensor:
unit_of_measurement: 'mV'
device_class: 'voltage'
state_class: 'measurement'
accuracy_decimals: 0
accuracy_decimals: 0
lambda: |-
return ((id(bms${bms_id}_max_cell_voltage).state - id(bms${bms_id}_min_cell_voltage).state)) * 1000;
@@ -396,7 +417,7 @@ sensor:
state_class: 'total_increasing'
accuracy_decimals: 3
filters:
- throttle: 1s
- throttle: 1s
- platform: template
name: "${name} ${bms_name} discharged"
@@ -407,9 +428,9 @@ sensor:
accuracy_decimals: 3
filters:
- throttle: 1s
text_sensor:
- platform: template
name: "${name} ${bms_name} fault level"
id: "bms${bms_id}_fault_level"
id: "bms${bms_id}_fault_level"
+48 -48
View File
@@ -1,5 +1,5 @@
# Updated : 2025.05.05
# Version : 1.1.2
# Updated : 2025.06.10
# Version : 1.1.3
# GitHub : https://github.com/GHswitt/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -22,7 +22,7 @@ globals:
type: bool
restore_value: no
initial_value: 'false'
# +-----------------------------------------------+
# | DEYE CAN PCS frames |
# | Thanks to: |
@@ -43,7 +43,7 @@ canbus:
id(deye${deye_id}_max_discharge_current).publish_state(i_discharge);
float u_min = ((x[7] << 8) | x[6]) / 10.0;
id(deye${deye_id}_battery_discharge_voltage).publish_state(u_min);
if (!id(deye${deye_id}_send_flag)) {
std::vector<uint8_t> data{0x01};
id(${canbus_id})->send_data(0x18A2FF80, true, data);
@@ -61,41 +61,41 @@ canbus:
- can_id: 0x359
then:
- lambda: |-
- lambda: |-
id(deye${deye_id}_cell_under_temperature_charge).publish_state(x[0] & 0x80);
id(deye${deye_id}_cell_over_temperature_charge).publish_state(x[0] & 0x40);
id(deye${deye_id}_discharge_over_current).publish_state(x[0] & 0x20);
id(deye${deye_id}_discharge_over_current).publish_state(x[0] & 0x20);
id(deye${deye_id}_charge_over_current).publish_state(x[0] & 0x10);
id(deye${deye_id}_module_under_voltage).publish_state(x[0] & 0x8);
id(deye${deye_id}_module_over_voltage).publish_state(x[0] & 0x4);
id(deye${deye_id}_cell_under_voltage).publish_state(x[0] & 0x2);
id(deye${deye_id}_cell_over_voltage).publish_state(x[0] & 0x1);
id(deye${deye_id}_heating_film_over_temperature).publish_state(x[1] & 0x20);
id(deye${deye_id}_mos_over_temperature).publish_state(x[1] & 0x10);
id(deye${deye_id}_cell_temperature_over_difference).publish_state(x[1] & 0x8);
id(deye${deye_id}_cell_voltage_over_difference).publish_state(x[1] & 0x4);
id(deye${deye_id}_cell_under_temperature_discharge).publish_state(x[1] & 0x2);
id(deye${deye_id}_cell_over_temperature_discharge).publish_state(x[1] & 0x1);
id(deye${deye_id}_master_address_repeat).publish_state(x[3] & 0x80);
id(deye${deye_id}_pcs_communication_fail).publish_state(x[3] & 0x40);
id(deye${deye_id}_internal_communication_fail).publish_state(x[3] & 0x20);
id(deye${deye_id}_eeprom_error).publish_state(x[3] & 0x10);
id(deye${deye_id}_mosfet_short_circuit).publish_state(x[3] & 0x8);
id(deye${deye_id}_temperature_sampling_fail).publish_state(x[3] & 0x4);
id(deye${deye_id}_cell_voltage_sampling_fail).publish_state(x[3] & 0x2);
id(deye${deye_id}_cell_voltage_sampling_fail).publish_state(x[3] & 0x2);
id(deye${deye_id}_afe_communication_fail).publish_state(x[3] & 0x1);
id(deye${deye_id}_cell_low_temperature_charge).publish_state(x[4] & 0x80);
id(deye${deye_id}_cell_high_temperature_charge).publish_state(x[4] & 0x40);
id(deye${deye_id}_discharge_high_current).publish_state(x[4] & 0x20);
id(deye${deye_id}_discharge_high_current).publish_state(x[4] & 0x20);
id(deye${deye_id}_charge_high_current).publish_state(x[4] & 0x10);
id(deye${deye_id}_module_low_voltage).publish_state(x[4] & 0x8);
id(deye${deye_id}_module_high_voltage).publish_state(x[4] & 0x4);
id(deye${deye_id}_cell_low_voltage).publish_state(x[4] & 0x2);
id(deye${deye_id}_cell_high_voltage).publish_state(x[4] & 0x1);
id(deye${deye_id}_heat_error).publish_state(x[5] & 0x80);
id(deye${deye_id}_heat_mos_adhession).publish_state(x[5] & 0x40);
id(deye${deye_id}_heating_film_high_temperature).publish_state(x[5] & 0x20);
@@ -104,7 +104,7 @@ canbus:
id(deye${deye_id}_cell_voltage_high_difference).publish_state(x[5] & 0x4);
id(deye${deye_id}_cell_low_temperature_discharge).publish_state(x[5] & 0x2);
id(deye${deye_id}_cell_high_temperature_discharge).publish_state(x[5] & 0x1);
uint64_t combined = x[0] | x[1] << 8 | x[3] << 16 | x[4] << 24 | (uint64_t)x[5] << 32;
id(deye${deye_id}_bms_errors_bitmask).publish_state(combined);
@@ -121,7 +121,7 @@ canbus:
if(x[5] == 5) id(deye${deye_id}_cell_manufacturer).publish_state("EVE 120Ah");
if(x[5] == 6) id(deye${deye_id}_cell_manufacturer).publish_state("PH 100Ah(214R)");
if(x[5] == 7) id(deye${deye_id}_cell_manufacturer).publish_state("ZENERGY 104Ah");
//ESP_LOGI("canid 0x35E:", "%02x %02x %02x %02x %02x %02x %02x %02x", x[0], x[1], x[2], x[3], x[4], x[5], x[6], x[7]);
//ESP_LOGI("canid 0x35E:", "%02x %02x %02x %02x %02x %02x %02x %02x", x[0], x[1], x[2], x[3], x[4], x[5], x[6], x[7]);
- can_id: 0x35C
then:
@@ -132,7 +132,7 @@ canbus:
id(deye${deye_id}_request_force_charge_1).publish_state(x[0] & 0x20);
id(deye${deye_id}_request_force_charge_2).publish_state(x[0] & 0x10);
id(deye${deye_id}_request_full_charge).publish_state(x[0] & 0x08);
# ESP_LOGI("canid 0x35C:", "%02x %02x %02x %02x %02x %02x %02x %02x", x[0], x[1], x[2], x[3], x[4], x[5], x[6], x[7]);
# ESP_LOGI("canid 0x35C:", "%02x %02x %02x %02x %02x %02x %02x %02x", x[0], x[1], x[2], x[3], x[4], x[5], x[6], x[7]);
- can_id: 0x356
then:
@@ -177,7 +177,7 @@ canbus:
id(deye${deye_id}_battery_array_discharge_current_limit).publish_state(i_discharge);
binary_sensor:
# Force charge 1
# Force charge 1
- platform: template
name: "${name} ${deye_name} Request force charge 1"
id: deye${deye_id}_request_force_charge_1
@@ -195,7 +195,7 @@ binary_sensor:
# Alarm/warning battery
- platform: template
id: "deye${deye_id}_charge_over_current"
name: "${name} ${deye_name} alarm charge overcurrent"
name: "${name} ${deye_name} alarm charge overcurrent"
- platform: template
id: "deye${deye_id}_discharge_over_current"
name: "${name} ${deye_name} alarm discharge overcurrent"
@@ -215,11 +215,11 @@ binary_sensor:
id: "deye${deye_id}_module_high_voltage"
- platform: template
id: "deye${deye_id}_module_over_voltage"
name: "${name} ${deye_name} alarm module overvoltage"
name: "${name} ${deye_name} alarm module overvoltage"
- platform: template
id: "deye${deye_id}_module_under_voltage"
name: "${name} ${deye_name} alarm module undervoltage"
# Alarm/warning cells
- platform: template
name: "${name} ${deye_name} cell low voltage"
@@ -242,12 +242,12 @@ binary_sensor:
- platform: template
name: "${name} ${deye_name} cell voltage high difference"
id: "deye${deye_id}_cell_voltage_high_difference"
# Temperature general
- platform: template
id: "deye${deye_id}_temperature_sampling_fail"
name: "${name} ${deye_name} alarm temperature sampling fail"
# Temperature MOSFET
- platform: template
name: "${name} ${deye_name} Mosfet high temperature"
@@ -255,7 +255,7 @@ binary_sensor:
- platform: template
id: "deye${deye_id}_mos_over_temperature"
name: "${name} ${deye_name} alarm MOSFET over temperature"
# Temperature cells
- platform: template
name: "${name} ${deye_name} cell low temperature charge"
@@ -286,8 +286,8 @@ binary_sensor:
id: "deye${deye_id}_cell_temperature_high_difference"
- platform: template
name: "${name} ${deye_name} alarm cell temperature over difference"
id: "deye${deye_id}_cell_temperature_over_difference"
id: "deye${deye_id}_cell_temperature_over_difference"
# Heating film
- platform: template
name: "${name} ${deye_name} alarm heating film overtemperature"
@@ -301,7 +301,7 @@ binary_sensor:
- platform: template
name: "${name} ${deye_name} heating film high temperature"
id: "deye${deye_id}_heating_film_high_temperature"
# Misc
- platform: template
name: "${name} ${deye_name} master address_repeat"
@@ -321,13 +321,13 @@ binary_sensor:
- platform: template
name: "${name} ${deye_name} Mosfet short circuit"
id: "deye${deye_id}_mosfet_short_circuit"
id: "deye${deye_id}_mosfet_short_circuit"
- platform: template
name: "${name} ${deye_name} AFE communication fail"
id: "deye${deye_id}_afe_communication_fail"
sensor:
sensor:
# Charge voltage
- platform: template
name: "${name} ${deye_name} charge voltage"
@@ -335,8 +335,8 @@ sensor:
unit_of_measurement: 'V'
device_class: 'voltage'
state_class: 'measurement'
accuracy_decimals: 2
accuracy_decimals: 2
# Discharge voltage
- platform: template
name: "${name} ${deye_name} discharge voltage"
@@ -344,8 +344,8 @@ sensor:
unit_of_measurement: 'V'
device_class: 'voltage'
state_class: 'measurement'
accuracy_decimals: 2
accuracy_decimals: 2
# Maximum charging current
- platform: template
id: deye${deye_id}_max_charge_current
@@ -359,7 +359,7 @@ sensor:
- throttle: 30s
- delta: 10
# Maximum discharging current
# Maximum discharging current
- platform: template
id: deye${deye_id}_max_discharge_current
name: "${name} ${deye_name} max discharging current"
@@ -371,8 +371,8 @@ sensor:
- or:
- throttle: 30s
- delta: 10
# SOC
- platform: template
unit_of_measurement: '%'
@@ -390,14 +390,14 @@ sensor:
device_class: 'battery'
state_class: 'measurement'
accuracy_decimals: 0
# Errors bitmask
- platform: template
id: deye${deye_id}_bms_errors_bitmask
name: "${name} ${deye_name} BMS Errors Bitmask"
accuracy_decimals: 0
icon: mdi:alert-circle-outline
# Total battery voltage
- platform: template
unit_of_measurement: 'V'
@@ -406,7 +406,7 @@ sensor:
accuracy_decimals: 2
id: deye${deye_id}_total_voltage
name: "${name} ${deye_name} battery voltage"
# Battery current
- platform: template
unit_of_measurement: 'A'
@@ -415,7 +415,7 @@ sensor:
accuracy_decimals: 2
id: deye${deye_id}_current
name: "${name} ${deye_name} battery current"
# Battery temperature
- platform: template
unit_of_measurement: '°C'
@@ -424,7 +424,7 @@ sensor:
accuracy_decimals: 1
id: deye${deye_id}_temperature_sensor_1
name: "${name} ${deye_name} temperature"
# Array charge current limit
- platform: template
name: "${name} ${deye_name} battery array charge current limit"
@@ -450,8 +450,8 @@ sensor:
- or:
- throttle: 30s
- delta: 10
# Min. cell voltage
# Min. cell voltage
- platform: template
unit_of_measurement: 'V'
device_class: 'voltage'
@@ -459,7 +459,7 @@ sensor:
accuracy_decimals: 3
id: deye${deye_id}_min_cell_voltage
name: "${name} ${deye_name} cell voltage min"
# Max. cell voltage
- platform: template
unit_of_measurement: 'V'
@@ -478,7 +478,7 @@ sensor:
unit_of_measurement: °C
device_class: temperature
# Max. temperature
# Max. temperature
- platform: template
id: deye${deye_id}_max_temperature
name: "${name} ${deye_name} max temperature"
@@ -486,7 +486,7 @@ sensor:
accuracy_decimals: 1
unit_of_measurement: °C
device_class: temperature
# Modules in normal state
- platform: template
name: "${name} ${deye_name} Module amount normal state"
@@ -521,8 +521,8 @@ sensor:
id: deye${deye_id}_module_amount
state_class: 'measurement'
accuracy_decimals: 0
# Battery capacity
# Battery capacity
- platform: template
name: "${name} ${deye_name} battery capacity"
id: deye${deye_id}_battery_capacity
@@ -1,5 +1,5 @@
# Updated : 2025.05.05
# Version : 1.1.2
# Updated : 2025.06.10
# Version : 1.1.3
# GitHub : https://github.com/GHswitt/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -22,7 +22,7 @@ globals:
type: bool
restore_value: no
initial_value: 'false'
# +-----------------------------------------------+
# | DEYE CAN PCS frames |
# | Thanks to: |
@@ -43,7 +43,7 @@ canbus:
id(deye${deye_id}_max_discharge_current).publish_state(i_discharge);
float u_min = ((x[7] << 8) | x[6]) / 10.0;
id(deye${deye_id}_battery_discharge_voltage).publish_state(u_min);
if (!id(deye${deye_id}_send_flag)) {
std::vector<uint8_t> data{0x01};
id(${canbus_id})->send_data(0x18A2FF80, true, data);
@@ -61,7 +61,7 @@ canbus:
- can_id: 0x359
then:
- lambda: |-
- lambda: |-
uint64_t combined = x[0] | x[1] << 8 | x[3] << 16 | x[4] << 24 | (uint64_t)x[5] << 32;
id(deye${deye_id}_bms_errors_bitmask).publish_state(combined);
@@ -80,7 +80,7 @@ canbus:
id(deye${deye_id}_module_amount_communication_disconnected).publish_state(x[3]);
id(deye${deye_id}_module_amount).publish_state(x[4]);
sensor:
sensor:
# Charge voltage
- platform: template
name: "${name} ${deye_name} charge voltage"
@@ -88,8 +88,8 @@ sensor:
unit_of_measurement: 'V'
device_class: 'voltage'
state_class: 'measurement'
accuracy_decimals: 2
accuracy_decimals: 2
# Discharge voltage
- platform: template
name: "${name} ${deye_name} discharge voltage"
@@ -97,8 +97,8 @@ sensor:
unit_of_measurement: 'V'
device_class: 'voltage'
state_class: 'measurement'
accuracy_decimals: 2
accuracy_decimals: 2
# Maximum charging current
- platform: template
id: deye${deye_id}_max_charge_current
@@ -112,7 +112,7 @@ sensor:
- throttle: 30s
- delta: 10
# Maximum discharging current
# Maximum discharging current
- platform: template
id: deye${deye_id}_max_discharge_current
name: "${name} ${deye_name} max discharging current"
@@ -124,8 +124,8 @@ sensor:
- or:
- throttle: 30s
- delta: 10
# SOC
- platform: template
unit_of_measurement: '%'
@@ -143,14 +143,14 @@ sensor:
device_class: 'battery'
state_class: 'measurement'
accuracy_decimals: 0
# Errors bitmask
- platform: template
id: deye${deye_id}_bms_errors_bitmask
name: "${name} ${deye_name} BMS Errors Bitmask"
accuracy_decimals: 0
icon: mdi:alert-circle-outline
# Modules in normal state
- platform: template
name: "${name} ${deye_name} Module amount normal state"
@@ -185,8 +185,8 @@ sensor:
id: deye${deye_id}_module_amount
state_class: 'measurement'
accuracy_decimals: 0
# Battery capacity
# Battery capacity
- platform: template
name: "${name} ${deye_name} battery capacity"
id: deye${deye_id}_battery_capacity
+26 -2
View File
@@ -1,5 +1,5 @@
# Updated : 2025.04.01
# Version : 1.1.4
# Updated : 2025.06.28
# Version : 1.1.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -312,6 +312,30 @@ sensor:
- delta: 1
lambda: return ${bms_charging_cycles};
# Charging power: Calculated from voltage and current
- platform: template
name: "${name} ${bms_name} battery power charging"
id: bms${bms_id}_charging_power
unit_of_measurement: 'W'
device_class: 'current'
state_class: 'measurement'
accuracy_decimals: 0
lambda: |-
if (id(bms${bms_id}_current).state > 0) return id(bms${bms_id}_total_voltage).state * id(bms${bms_id}_current).state;
else return 0;
# Discharging power: Calculated from voltage and current
- platform: template
name: "${name} ${bms_name} battery power discharging"
id: bms${bms_id}_discharging_power
unit_of_measurement: 'W'
device_class: 'current'
state_class: 'measurement'
accuracy_decimals: 0
lambda: |-
if (id(bms${bms_id}_current).state < 0) return id(bms${bms_id}_total_voltage).state * -id(bms${bms_id}_current).state;
else return 0;
number:
# errors_bitmask (16bits)
- platform: template
+22 -5
View File
@@ -1,5 +1,5 @@
# Updated : 2025.04.01
# Version : 1.1.2
# Updated : 2025.06.16
# Version : 1.1.6
# GitHub : https://github.com/syssi/esphome-jdb-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -116,13 +116,14 @@ sensor:
id: bms${bms_id}_battery_capacity
name: "${name} ${bms_name} nominal capacity"
charging_cycles:
id: bms${bms_id}_charging_cycles
id: bms${bms_id}_charging_cycles_raw
internal: true
name: "${name} ${bms_name} charging cycles"
capacity_remaining:
id: bms${bms_id}_capacity_remaining_ah
name: "${name} ${bms_name} capacity remaining"
battery_cycle_capacity:
name: "${name} ${bms_name} battery cycle capacity"
# battery_cycle_capacity:
# name: "${name} ${bms_name} battery cycle capacity" # https://github.com/syssi/esphome-jbd-bms/issues/143
total_voltage:
id: bms${bms_id}_total_voltage
name: "${name} ${bms_name} total voltage"
@@ -303,6 +304,22 @@ sensor:
- delta: 0.001
lambda: return ${bms_balance_trigger_voltage};
# Charging cycle capacity - Calculated from charging cycles and battery capacity
- platform: template
id: bms${bms_id}_cycle_capacity_raw
name: "${name} ${bms_name} charging cycle capacity"
update_interval: ${bms_update_interval}
unit_of_measurement: Ah
state_class: total
icon: mdi:car-battery
accuracy_decimals: 0
internal: true
filters:
- or:
- throttle: 10s
- delta: 1
lambda: return id(bms${bms_id}_charging_cycles_raw).state * id(bms${bms_id}_battery_capacity).state;
text_sensor:
- platform: jbd_bms_ble
jbd_bms_ble_id: jbd_bms_ble${bms_id}
+22 -5
View File
@@ -1,5 +1,5 @@
# Updated : 2025.04.01
# Version : 1.1.4
# Updated : 2025.06.16
# Version : 1.1.6
# GitHub : https://github.com/syssi/esphome-jdb-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -101,13 +101,14 @@ sensor:
id: bms${bms_id}_battery_capacity
name: "${name} ${bms_name} nominal capacity"
charging_cycles:
id: bms${bms_id}_charging_cycles
id: bms${bms_id}_charging_cycles_raw
internal: true
name: "${name} ${bms_name} charging cycles"
capacity_remaining:
id: bms${bms_id}_capacity_remaining_ah
name: "${name} ${bms_name} capacity remaining"
battery_cycle_capacity:
name: "${name} ${bms_name} battery cycle capacity"
# battery_cycle_capacity:
# name: "${name} ${bms_name} battery cycle capacity" # https://github.com/syssi/esphome-jbd-bms/issues/143
total_voltage:
id: bms${bms_id}_total_voltage
name: "${name} ${bms_name} total voltage"
@@ -287,6 +288,22 @@ sensor:
- delta: 0.001
lambda: return ${bms_balance_trigger_voltage};
# Charging cycle capacity - Calculated from charging cycles and battery capacity
- platform: template
id: bms${bms_id}_cycle_capacity_raw
name: "${name} ${bms_name} charging cycle capacity"
update_interval: ${bms_update_interval}
unit_of_measurement: Ah
state_class: total
icon: mdi:car-battery
accuracy_decimals: 0
internal: true
filters:
- or:
- throttle: 10s
- delta: 1
lambda: return id(bms${bms_id}_charging_cycles_raw).state * id(bms${bms_id}_battery_capacity).state;
text_sensor:
- platform: jbd_bms
jbd_bms_id: jbd_bms${bms_id}
@@ -1,5 +1,5 @@
# Updated : 2025.04.01
# Version : 1.2.7
# Updated : 2025.07.07
# Version : 1.2.9
# GitHub : https://github.com/syssi/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -28,7 +28,7 @@ ota:
then:
- switch.turn_off: bms${bms_id}_enable_bluetooth_connection
- logger.log: "BLE shutdown for flashing"
# +--------------------------------------+
# | Component settings |
# +--------------------------------------+
@@ -93,6 +93,7 @@ switch:
id: bms${bms_id}_discharge_switch
name: "${name} ${bms_name} Discharge switch"
balancer:
id: bms${bms_id}_balance_switch
name: "${name} ${bms_name} Balance switch"
# +--------------------------------------+
- platform: ble_client
@@ -156,9 +157,12 @@ sensor:
id: bms${bms_id}_battery_capacity
name: "${name} ${bms_name} total battery capacity setting"
charging_cycles:
id: bms${bms_id}_charging_cycles
id: bms${bms_id}_charging_cycles_raw
internal: true
name: "${name} ${bms_name} charging cycles"
total_charging_cycle_capacity:
id: bms${bms_id}_cycle_capacity_raw
internal: true
name: "${name} ${bms_name} total charging cycle capacity"
balancing_current:
name: "${name} ${bms_name} balancing current"
@@ -1,5 +1,5 @@
# Updated : 2025.04.21
# Version : 1.1.1
# Updated : 2025.07.07
# Version : 1.1.3
# GitHub : https://github.com/txubelaxu/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -46,6 +46,7 @@ switch:
id: bms${bms_id}_discharge_switch
name: "${name} ${bms_name} discharging"
balancing:
id: bms${bms_id}_balance_switch
name: "${name} ${bms_name} balancing"
emergency:
name: "${name} ${bms_name} emergency"
@@ -139,9 +140,12 @@ sensor:
id: bms${bms_id}_capacity_remaining_ah
name: "${name} ${bms_name} battery capacity remaining"
charging_cycles:
id: bms${bms_id}_charging_cycles
id: bms${bms_id}_charging_cycles_raw
internal: true
name: "${name} ${bms_name} charging cycles"
battery_capacity_total_charging_cycle:
id: bms${bms_id}_cycle_capacity_raw
internal: true
name: "${name} ${bms_name} battery capacity total charging cycle"
battery_total_runtime:
name: "${name} ${bms_name} battery total runtime"
@@ -152,9 +156,9 @@ sensor:
name: "${name} ${bms_name} errors bitmask"
cell_count_real:
name: "${name} ${bms_name} cell count real"
battery_total_alarms_count:
battery_total_alarms_count:
name: "${name} ${bms_name} battery total alarms count"
battery_total_alarms_active:
battery_total_alarms_active:
name: "${name} ${bms_name} battery total alarms active"
uart1_protocol_number:
name: "${name} ${bms_name} uart1 protocol number"
@@ -280,7 +284,7 @@ text_sensor:
info_device_serial_number:
name: "${name} ${bms_name} info device serial number"
info_device_setup_passcode:
name: "${name} ${bms_name} info device setup passcode"
name: "${name} ${bms_name} info device setup passcode"
number:
- platform: jk_rs485_bms
@@ -298,7 +302,7 @@ number:
name: "${name} ${bms_name} max charging current"
max_discharging_current:
id: bms${bms_id}_max_discharge_current
name: "${name} ${bms_name} max discharging current"
name: "${name} ${bms_name} max discharging current"
cell_overvoltage_protection:
id: bms${bms_id}_cell_ovp
name: "${name} ${bms_name} cell overvoltage protection"
@@ -323,4 +327,4 @@ number:
id: bms${bms_id}_cell_uvpr
name: "${name} ${bms_name} cell undervoltage protection recovery"
cell_power_off_voltage:
name: "${name} ${bms_name} cell power off voltage"
name: "${name} ${bms_name} cell power off voltage"
@@ -1,5 +1,5 @@
# Updated : 2025.04.01
# Version : 1.2.6
# Updated : 2025.07.07
# Version : 1.2.8
# GitHub : https://github.com/txubelaxu/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -48,6 +48,7 @@ switch:
id: bms${bms_id}_discharge_switch
name: "${name} ${bms_name} discharging"
balancing:
id: bms${bms_id}_balance_switch
name: "${name} ${bms_name} balancing"
emergency:
name: "${name} ${bms_name} emergency"
@@ -318,9 +319,12 @@ sensor:
name: "${name} ${bms_name} battery capacity remaining"
charging_cycles:
id: bms${bms_id}_charging_cycles
id: bms${bms_id}_charging_cycles_raw
internal: true
name: "${name} ${bms_name} charging cycles"
battery_capacity_total_charging_cycle:
id: bms${bms_id}_cycle_capacity_raw
internal: true
name: "${name} ${bms_name} battery capacity total charging cycle"
battery_total_runtime:
name: "${name} ${bms_name} battery total runtime"
@@ -339,9 +343,9 @@ sensor:
name: "${name} ${bms_name} powertube temperature protection"
powertube_temperature_protection_recovery:
name: "${name} ${bms_name} powertube temperature protection recovery"
battery_total_alarms_count:
battery_total_alarms_count:
name: "${name} ${bms_name} battery total alarms count"
battery_total_alarms_active:
battery_total_alarms_active:
name: "${name} ${bms_name} battery total alarms active"
emergency_time_countdown:
name: "${name} ${bms_name} emergency time countdown"
@@ -352,17 +356,17 @@ sensor:
battery_soh_valuation:
id: bms${bms_id}_battery_soh
name: "${name} ${bms_name} battery soh valuation"
discharging_overcurrent_protection_release_time:
discharging_overcurrent_protection_release_time:
name: "${name} ${bms_name} discharging overcurrent protection release time"
discharging_short_circuit_protection_release_time:
discharging_short_circuit_protection_release_time:
name: "${name} ${bms_name} discharging short circuit protection release time"
charging_overcurrent_protection_release_time:
charging_overcurrent_protection_release_time:
name: "${name} ${bms_name} charging overcurrent protection release time"
charging_short_circuit_protection_release_time:
charging_short_circuit_protection_release_time:
name: "${name} ${bms_name} charging short circuit protection release time"
cell_undervoltage_protection_release_time:
cell_undervoltage_protection_release_time:
name: "${name} ${bms_name} cell undervoltage protection release time"
cell_overvoltage_protection_release_time:
cell_overvoltage_protection_release_time:
name: "${name} ${bms_name} cell overvoltage protection release time"
text_sensor:
@@ -391,7 +395,7 @@ text_sensor:
info_device_serial_number:
name: "${name} ${bms_name} info device serial number"
info_device_setup_passcode:
name: "${name} ${bms_name} info device setup passcode"
name: "${name} ${bms_name} info device setup passcode"
number:
- platform: jk_rs485_bms
@@ -433,7 +437,7 @@ number:
name: "${name} ${bms_name} cell power off voltage"
cell_count_settings:
id: bms${bms_id}_cell_count
name: "${name} ${bms_name} cell count settings"
name: "${name} ${bms_name} cell count settings"
battery_capacity_total_settings:
id: bms${bms_id}_battery_capacity
name: "${name} ${bms_name} battery capacity total setting"
@@ -468,7 +472,7 @@ number:
charging_lowtemperature_protection:
name: "${name} ${bms_name} charging lowtemperature protection"
charging_lowtemperature_protection_recovery:
name: "${name} ${bms_name} charging lowtemperature protection recovery"
name: "${name} ${bms_name} charging lowtemperature protection recovery"
mos_overtemperature_protection:
name: "${name} ${bms_name} mos overtemperature protection"
mos_overtemperature_protection_recovery:
@@ -1,5 +1,5 @@
# Updated : 2025.04.01
# Version : 1.2.6
# Updated : 2025.07.07
# Version : 1.2.8
# GitHub : https://github.com/txubelaxu/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -48,6 +48,7 @@ switch:
id: bms${bms_id}_discharge_switch
name: "${name} ${bms_name} discharging"
balancing:
id: bms${bms_id}_balance_switch
name: "${name} ${bms_name} balancing"
emergency:
name: "${name} ${bms_name} emergency"
@@ -161,9 +162,12 @@ sensor:
id: bms${bms_id}_capacity_remaining_ah
name: "${name} ${bms_name} battery capacity remaining"
charging_cycles:
id: bms${bms_id}_charging_cycles
id: bms${bms_id}_charging_cycles_raw
internal: true
name: "${name} ${bms_name} charging cycles"
battery_capacity_total_charging_cycle:
id: bms${bms_id}_cycle_capacity_raw
internal: true
name: "${name} ${bms_name} battery capacity total charging cycle"
battery_total_runtime:
name: "${name} ${bms_name} battery total runtime"
@@ -174,9 +178,9 @@ sensor:
name: "${name} ${bms_name} errors bitmask"
cell_count_real:
name: "${name} ${bms_name} cell count real"
battery_total_alarms_count:
battery_total_alarms_count:
name: "${name} ${bms_name} battery total alarms count"
battery_total_alarms_active:
battery_total_alarms_active:
name: "${name} ${bms_name} battery total alarms active"
uart1_protocol_number:
name: "${name} ${bms_name} uart1 protocol number"
@@ -308,7 +312,7 @@ text_sensor:
info_device_serial_number:
name: "${name} ${bms_name} info device serial number"
info_device_setup_passcode:
name: "${name} ${bms_name} info device setup passcode"
name: "${name} ${bms_name} info device setup passcode"
number:
- platform: jk_rs485_bms
@@ -326,7 +330,7 @@ number:
name: "${name} ${bms_name} max charging current"
max_discharging_current:
id: bms${bms_id}_max_discharge_current
name: "${name} ${bms_name} max discharging current"
name: "${name} ${bms_name} max discharging current"
cell_overvoltage_protection:
id: bms${bms_id}_cell_ovp
name: "${name} ${bms_name} cell overvoltage protection"
@@ -351,4 +355,4 @@ number:
id: bms${bms_id}_cell_uvpr
name: "${name} ${bms_name} cell undervoltage protection recovery"
cell_power_off_voltage:
name: "${name} ${bms_name} cell power off voltage"
name: "${name} ${bms_name} cell power off voltage"
@@ -1,5 +1,5 @@
# Updated : 2025.04.01
# Version : 1.2.7
# Updated : 2025.06.11
# Version : 1.2.8
# GitHub : https://github.com/syssi/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -214,9 +214,12 @@ sensor:
name: "${name} ${bms_name} temperature sensors"
entity_category: diagnostic
charging_cycles:
id: bms${bms_id}_charging_cycles
id: bms${bms_id}_charging_cycles_raw
internal: true
name: "${name} ${bms_name} charging cycles"
total_charging_cycle_capacity:
id: bms${bms_id}_cycle_capacity_raw
internal: true
name: "${name} ${bms_name} total charging cycle capacity"
battery_strings:
id: bms${bms_id}_cell_count
@@ -0,0 +1,267 @@
# Updated : 2025.06.17
# Version : 1.1.6
# GitHub : https://github.com/syssi/esphome-seplos-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
packages:
bms_base: !include bms_base.yaml
bms_temperature_sensor: !include bms_temperature_sensor_4.yaml
# +--------------------------------------+
# | Component settings |
# +--------------------------------------+
external_components:
- source: github://syssi/esphome-seplos-bms@main
refresh: 0s
seplos_bms:
- id: seplos_bms${bms_id}
address: ${bms_address}
protocol_version: ${bms_protocol_version}
seplos_modbus_id: ${seplos_modbus_id}
update_interval: ${bms_update_interval}
# +--------------------------------------+
# | Component entities |
# +--------------------------------------+
sensor:
- platform: seplos_bms
seplos_bms_id: seplos_bms${bms_id}
min_cell_voltage:
id: bms${bms_id}_min_cell_voltage
name: "${name} ${bms_name} min cell voltage"
max_cell_voltage:
id: bms${bms_id}_max_cell_voltage
name: "${name} ${bms_name} max cell voltage"
min_voltage_cell:
id: bms${bms_id}_min_voltage_cell
name: "${name} ${bms_name} min voltage cell"
max_voltage_cell:
id: bms${bms_id}_max_voltage_cell
name: "${name} ${bms_name} max voltage cell"
delta_cell_voltage:
name: "${name} ${bms_name} delta cell voltage"
average_cell_voltage:
id: bms${bms_id}_average_cell_voltage
name: "${name} ${bms_name} average cell voltage"
cell_voltage_1:
name: "${name} ${bms_name} cell voltage 01"
cell_voltage_2:
name: "${name} ${bms_name} cell voltage 02"
cell_voltage_3:
name: "${name} ${bms_name} cell voltage 03"
cell_voltage_4:
name: "${name} ${bms_name} cell voltage 04"
cell_voltage_5:
name: "${name} ${bms_name} cell voltage 05"
cell_voltage_6:
name: "${name} ${bms_name} cell voltage 06"
cell_voltage_7:
name: "${name} ${bms_name} cell voltage 07"
cell_voltage_8:
name: "${name} ${bms_name} cell voltage 08"
cell_voltage_9:
name: "${name} ${bms_name} cell voltage 09"
cell_voltage_10:
name: "${name} ${bms_name} cell voltage 10"
cell_voltage_11:
name: "${name} ${bms_name} cell voltage 11"
cell_voltage_12:
name: "${name} ${bms_name} cell voltage 12"
cell_voltage_13:
name: "${name} ${bms_name} cell voltage 13"
cell_voltage_14:
name: "${name} ${bms_name} cell voltage 14"
cell_voltage_15:
name: "${name} ${bms_name} cell voltage 15"
cell_voltage_16:
name: "${name} ${bms_name} cell voltage 16"
temperature_1:
id: bms${bms_id}_temperature_sensor_1
name: "${name} ${bms_name} temperature 1"
temperature_2:
id: bms${bms_id}_temperature_sensor_2
name: "${name} ${bms_name} temperature 2"
temperature_3:
id: bms${bms_id}_temperature_sensor_3
name: "${name} ${bms_name} temperature 3"
temperature_4:
id: bms${bms_id}_temperature_sensor_4
name: "${name} ${bms_name} temperature 4"
temperature_5:
name: "${name} ${bms_name} environment temperature"
temperature_6:
name: "${name} ${bms_name} mosfet temperature"
total_voltage:
id: bms${bms_id}_total_voltage
name: "${name} ${bms_name} total voltage"
current:
id: bms${bms_id}_current
name: "${name} ${bms_name} current"
power:
id: bms${bms_id}_power
name: "${name} ${bms_name} power"
charging_power:
id: bms${bms_id}_charging_power
name: "${name} ${bms_name} charging power"
discharging_power:
id: bms${bms_id}_discharging_power
name: "${name} ${bms_name} discharging power"
residual_capacity:
id: bms${bms_id}_capacity_remaining_ah
name: "${name} ${bms_name} residual capacity"
battery_capacity:
id: bms${bms_id}_battery_capacity
name: "${name} ${bms_name} battery capacity"
rated_capacity:
name: "${name} ${bms_name} rated capacity"
state_of_charge:
id: bms${bms_id}_state_of_charge
name: "${name} ${bms_name} state of charge"
charging_cycles:
id: bms${bms_id}_charging_cycles_raw
internal: true
name: "${name} ${bms_name} charging cycles"
state_of_health:
id: bms${bms_id}_battery_soh
name: "${name} ${bms_name} state of health"
port_voltage:
name: "${name} ${bms_name} port voltage"
# Required sensors cannot be retrieved from BMS
# max_charge_current
- platform: template
id: bms${bms_id}_max_charge_current
name: "${name} ${bms_name} max charge current"
update_interval: ${bms_update_interval}
accuracy_decimals: 0
unit_of_measurement: A
icon: mdi:current-dc
filters:
- or:
- throttle: 10s
- delta: 1
lambda: return ${bms_max_charge_current};
# max_discharge_current
- platform: template
id: bms${bms_id}_max_discharge_current
name: "${name} ${bms_name} max discharge current"
update_interval: ${bms_update_interval}
accuracy_decimals: 0
unit_of_measurement: A
icon: mdi:current-dc
filters:
- or:
- throttle: 10s
- delta: 1
lambda: return ${bms_max_discharge_current};
# cell_ovp
- platform: template
id: bms${bms_id}_cell_ovp
name: "${name} ${bms_name} cell ovp"
update_interval: ${bms_update_interval}
accuracy_decimals: 3
unit_of_measurement: V
device_class: voltage
filters:
- or:
- throttle: 10s
- delta: 0.001
lambda: return ${bms_cell_ovp};
# cell_uvp
- platform: template
id: bms${bms_id}_cell_uvp
name: "${name} ${bms_name} cell uvp"
update_interval: ${bms_update_interval}
accuracy_decimals: 3
unit_of_measurement: V
device_class: voltage
filters:
- or:
- throttle: 10s
- delta: 0.001
lambda: return ${bms_cell_uvp};
# balance_trigger_voltage
- platform: template
id: bms${bms_id}_balance_trigger_voltage
name: "${name} ${bms_name} balance trigger voltage"
update_interval: ${bms_update_interval}
accuracy_decimals: 3
unit_of_measurement: V
device_class: voltage
filters:
- or:
- throttle: 10s
- delta: 0.001
lambda: return ${bms_balance_trigger_voltage};
# FAKE errors_bitmask
# Alarm management is not supported at this time
# Internal : only specifying an id without a name will implicitly set this to true.
- platform: template
id: bms${bms_id}_yambms_errors_bitmask
update_interval: ${bms_update_interval}
accuracy_decimals: 0
icon: mdi:alert-circle-outline
filters:
- or:
- throttle: 10s
- delta: 1
lambda: return 0;
# Charging cycle capacity - Calculated from charging cycles and battery capacity
- platform: template
id: bms${bms_id}_cycle_capacity_raw
name: "${name} ${bms_name} charging cycle capacity"
update_interval: ${bms_update_interval}
unit_of_measurement: Ah
state_class: total
icon: mdi:car-battery
accuracy_decimals: 0
internal: true
filters:
- or:
- throttle: 10s
- delta: 1
lambda: return id(bms${bms_id}_charging_cycles_raw).state * id(bms${bms_id}_battery_capacity).state;
binary_sensor:
# Required sensors cannot be retrieved from BMS
# online_status
- platform: template
id: bms${bms_id}_online_status
name: "${name} ${bms_name} online status"
lambda: |-
if (id(bms${bms_id}_total_voltage).state > 0)
return true;
else
return false;
# equalizing
- platform: template
id: bms${bms_id}_equalizing
name: "${name} ${bms_name} balancing"
lambda: return false;
# bms_switch_charging
- platform: template
id: bms${bms_id}_charging_allowed
name: "${name} ${bms_name} charging"
lambda: return true;
# bms_switch_discharging
- platform: template
id: bms${bms_id}_discharging_allowed
name: "${name} ${bms_name} discharging"
lambda: return true;
+4 -4
View File
@@ -1,5 +1,5 @@
# Updated : 2024.11.11
# Version : 1.1.1
# Updated : 2025.06.10
# Version : 1.1.2
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -15,8 +15,8 @@
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
sensor:
# MIN temperature
- platform: template
+4 -4
View File
@@ -1,5 +1,5 @@
# Updated : 2024.11.11
# Version : 1.1.1
# Updated : 2025.06.10
# Version : 1.1.2
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -15,8 +15,8 @@
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
sensor:
# MIN temperature
- platform: template
+4 -4
View File
@@ -1,5 +1,5 @@
# Updated : 2024.11.11
# Version : 1.1.1
# Updated : 2025.06.10
# Version : 1.1.2
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -15,8 +15,8 @@
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
sensor:
# MIN temperature
- platform: template
+4 -4
View File
@@ -1,5 +1,5 @@
# Updated : 2024.11.11
# Version : 1.1.1
# Updated : 2025.06.10
# Version : 1.1.2
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -15,8 +15,8 @@
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
sensor:
# MIN temperature
- platform: template
+2 -2
View File
@@ -28,8 +28,8 @@ substitutions:
tx_pin_2: '6'
rx_pin_2: '7'
# uart_esp_3
tx_pin_3: '8'
rx_pin_3: '9'
tx_pin_3: '2'
rx_pin_3: '3'
# canbus_esp32_can (Atomic CAN base)
tx_pin_4: '18'
rx_pin_4: '19'
@@ -1,5 +1,5 @@
# Updated : 2025.04.01
# Version : 1.2.7
# Updated : 2025.06.12
# Version : 1.3.0
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -42,12 +42,12 @@ substitutions:
packages:
device_base: !include ../base/device_base.yaml
device_base_wifi: !include ../base/device_base_wifi.yaml
device_cpu_freq_240: !include board_options_cpu_freq_240_esp32-s3.yaml
board_rgb_led: !include board_options_rgb_led_status.yaml
esp32:
board: m5stack-atoms3
variant: esp32s3
cpu_frequency: 240MHz
framework:
type: esp-idf
+5 -15
View File
@@ -1,5 +1,5 @@
# Updated : 2025.04.07
# Version : 1.2.8
# Updated : 2025.06.12
# Version : 1.3.0
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -20,6 +20,7 @@
substitutions:
board_chip: "ESP32-S3"
board_name: "Atom S3"
display_update_interval: "500ms"
# Interfaces GPIOs
# uart_esp_1 (Grove port)
tx_pin_1: '2'
@@ -42,26 +43,15 @@ substitutions:
packages:
device_base: !include ../base/device_base.yaml
device_base_wifi: !include ../base/device_base_wifi.yaml
device_cpu_freq_240: !include board_options_cpu_freq_240_esp32-s3.yaml
display: !include board_options_display_128x128.yaml
# From platform-espressif32 6.1.0
# https://github.com/espressif/esp-idf/releases
# https://github.com/platformio/platform-espressif32/releases
esp32:
board: m5stack-atoms3
variant: esp32s3
cpu_frequency: 240MHz
framework:
type: esp-idf
# Atom S3 - SKU:C123
# https://docs.m5stack.com/en/core/AtomS3
# esp32:
# board: esp32-s3-devkitc-1
# variant: esp32s3
# framework:
# type: esp-idf
esphome:
platformio_options:
board_build.flash_mode: dio # use Dual IO (dio) instead of Quad IO (qio) to prevent boot loop after flashing
@@ -145,6 +135,6 @@ display:
offset_height: 2
offset_width: 1
eightbitcolor: true
update_interval: 1s
update_interval: ${display_update_interval}
data_rate: 40Mhz
rotation: ${display_rotation}
+7 -11
View File
@@ -1,5 +1,5 @@
# Updated : 2025.04.07
# Version : 1.2.8
# Updated : 2025.06.12
# Version : 1.3.0
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -20,6 +20,7 @@
substitutions:
board_chip: "ESP32-S3"
board_name: "Atom S3R"
display_update_interval: "500ms"
# Interfaces GPIOs
# uart_esp_1 (Grove port)
tx_pin_1: '2'
@@ -42,14 +43,14 @@ substitutions:
packages:
device_base: !include ../base/device_base.yaml
device_base_wifi: !include ../base/device_base_wifi.yaml
device_cpu_freq_240: !include board_options_cpu_freq_240_esp32-s3.yaml
display: !include board_options_display_128x128.yaml
psram: !include board_options_psram_settings.yaml
psram: !include board_options_ESP32-S3_PSRAM.yaml
esp32:
board: m5stack-atoms3
variant: esp32s3
flash_size: 8MB
cpu_frequency: 240MHz
framework:
type: esp-idf
@@ -62,11 +63,6 @@ esphome:
- output.turn_on:
id: white
# PSRAM activation with default options
psram:
mode: octal
speed: 80MHz
external_components:
# Backlight
- source:
@@ -111,7 +107,7 @@ i2c:
sda: 45
scl: 0
scan: true
lp5562:
- i2c_id: atom_i2c_bus
@@ -170,6 +166,6 @@ display:
offset_height: 2
offset_width: 1
eightbitcolor: true
update_interval: 1s
update_interval: ${display_update_interval}
data_rate: 40Mhz
rotation: ${display_rotation}
+5 -15
View File
@@ -1,5 +1,5 @@
# Updated : 2025.05.14
# Version : 1.2.8
# Updated : 2025.06.12
# Version : 1.3.0
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -20,6 +20,7 @@
substitutions:
board_chip: "ESP32-S3"
board_name: "Atom S3"
display_update_interval: "500ms"
# Interfaces GPIOs
# uart_esp_1 (Grove port)
tx_pin_1: '2'
@@ -42,26 +43,15 @@ substitutions:
packages:
device_base: !include ../base/device_base.yaml
device_base_wifi: !include ../base/device_base_wifi.yaml
device_cpu_freq_240: !include board_options_cpu_freq_240_esp32-s3.yaml
# display: !include board_options_display_128x128.yaml
# From platform-espressif32 6.1.0
# https://github.com/espressif/esp-idf/releases
# https://github.com/platformio/platform-espressif32/releases
esp32:
board: m5stack-atoms3
variant: esp32s3
cpu_frequency: 240MHz
framework:
type: esp-idf
# Atom S3 - SKU:C123
# https://docs.m5stack.com/en/core/AtomS3
# esp32:
# board: esp32-s3-devkitc-1
# variant: esp32s3
# framework:
# type: esp-idf
esphome:
platformio_options:
board_build.flash_mode: dio # use Dual IO (dio) instead of Quad IO (qio) to prevent boot loop after flashing
@@ -145,6 +135,6 @@ display:
offset_height: 2
offset_width: 1
eightbitcolor: true
update_interval: 1s
update_interval: ${display_update_interval}
data_rate: 40Mhz
rotation: ${display_rotation}
@@ -1,5 +1,5 @@
# Updated : 2025.04.01
# Version : 1.2.7
# Updated : 2025.06.12
# Version : 1.3.0
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -43,12 +43,12 @@ substitutions:
packages:
device_base: !include ../base/device_base.yaml
device_base_wifi: !include ../base/device_base_wifi.yaml
device_cpu_freq_240: !include board_options_cpu_freq_240_esp32-s3.yaml
display: !include board_options_display_128x128.yaml
esp32:
board: m5stack-atoms3
variant: esp32s3
cpu_frequency: 240MHz
framework:
type: esp-idf
@@ -103,7 +103,7 @@ fan:
name: "${name} ${board_name} Backlight control"
# web_server:
# sorting_weight: ${web_server_sorting_group}00
# sorting_group_id: group_${web_server_sorting_group}
# sorting_group_id: group_${web_server_sorting_group}
restore_mode: RESTORE_DEFAULT_ON
icon: mdi:brightness-6
@@ -260,8 +260,8 @@ script:
}
# web_server v3 needs to be added and sorting_groups must be defined to use grouping
# web_server:
# version: 3
# web_server:
# version: 3
# sorting_groups:
# - id: group_666
# name: "${board_name} Backlight Control"
+3 -9
View File
@@ -1,5 +1,5 @@
# Updated : 2025.04.07
# Version : 1.2.9
# Updated : 2025.06.12
# Version : 1.3.0
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -42,13 +42,12 @@ substitutions:
packages:
device_base: !include ../base/device_base.yaml
device_base_wifi: !include ../base/device_base_wifi.yaml
device_cpu_freq_240: !include board_options_cpu_freq_240_esp32-s3.yaml
board_rgb_led: !include board_options_rgb_led_status.yaml
# psram_settings: !include board_options_psram_settings.yaml
esp32:
board: esp32-s3-devkitc-1
flash_size: 16MB # ajust according to your ESP32-S3 version
cpu_frequency: 240MHz
framework:
type: esp-idf
@@ -56,11 +55,6 @@ esphome:
platformio_options:
board_build.flash_mode: dio # use Dual IO (dio) instead of Quad IO (qio) to prevent boot loop after flashing
# PSRAM activation with default options
# psram:
# mode: octal
# speed: 80MHz
wifi:
id: my_network
ssid: !secret wifi_ssid
@@ -1,5 +1,5 @@
# Updated : 2025.04.07
# Version : 1.2.9
# Updated : 2025.06.12
# Version : 1.3.0
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -42,13 +42,12 @@ substitutions:
packages:
device_base: !include ../base/device_base.yaml
device_base_wifi: !include ../base/device_base_wifi.yaml
device_cpu_freq_240: !include board_options_cpu_freq_240_esp32-s3.yaml
board_rgb_led: !include board_options_rgb_led_status.yaml
# psram_settings: !include board_options_psram_settings.yaml
esp32:
board: esp32-s3-devkitc-1
flash_size: 16MB # ajust according to your ESP32-S3 version
cpu_frequency: 240MHz
framework:
type: esp-idf
@@ -56,11 +55,6 @@ esphome:
platformio_options:
board_build.flash_mode: dio # use Dual IO (dio) instead of Quad IO (qio) to prevent boot loop after flashing
# PSRAM activation with default options
# psram:
# mode: octal
# speed: 80MHz
wifi:
id: my_network
ssid: !secret wifi_ssid
@@ -1,5 +1,5 @@
# Updated : 2025.04.07
# Version : 1.2.9
# Updated : 2025.06.12
# Version : 1.3.0
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -42,13 +42,12 @@ substitutions:
packages:
device_base: !include ../base/device_base.yaml
device_base_wifi: !include ../base/device_base_wifi.yaml
device_cpu_freq_240: !include board_options_cpu_freq_240_esp32-s3.yaml
board_rgb_led: !include board_options_rgb_led_status.yaml
# psram_settings: !include board_options_psram_settings.yaml
esp32:
board: esp32-s3-devkitc-1
flash_size: 16MB # ajust according to your ESP32-S3 version
cpu_frequency: 240MHz
framework:
type: esp-idf
@@ -56,11 +55,6 @@ esphome:
platformio_options:
board_build.flash_mode: dio # use Dual IO (dio) instead of Quad IO (qio) to prevent boot loop after flashing
# PSRAM activation with default options
# psram:
# mode: octal
# speed: 80MHz
wifi:
id: my_network
ssid: !secret wifi_ssid
@@ -1,5 +1,5 @@
# Updated : 2025.03.21
# Version : 1.2.7
# Updated : 2025.06.12
# Version : 1.3.0
# GitHub : https://github.com/SeByDocKy/pvbrain2
substitutions:
@@ -9,13 +9,12 @@ substitutions:
packages:
device_base: !include ../base/device_base.yaml
device_base_wifi: !include ../base/device_base_wifi.yaml
device_cpu_freq_240: !include board_options_cpu_freq_240_esp32-s3.yaml
board_rgb_led: !include board_options_rgb_led_status.yaml
# psram: !include board_options_psram_settings.yaml
esp32:
board: esp32-s3-devkitc-1
flash_size: 16MB # ajust according to your ESP32-S3 version
cpu_frequency: 240MHz
framework:
type: esp-idf
@@ -23,11 +22,6 @@ esphome:
platformio_options:
board_build.flash_mode: dio # use Dual IO (dio) instead of Quad IO (qio) to prevent boot loop after flashing
# PSRAM activation with default options
# psram:
# mode: octal
# speed: 80MHz
wifi:
id: my_network
ssid: !secret wifi_ssid
@@ -0,0 +1,151 @@
# Updated : 2025.06.14
# Version : 1.1.1
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
# https://github.com/Xinyuan-LilyGO/T-Connect-Pro
substitutions:
board_chip: "ESP32-S3"
board_name: "LilyGo T-Connect Pro"
# Interfaces GPIOs
# uart_esp_1: RS232
tx_pin_1: '4'
rx_pin_1: '5'
# uart_esp_2: RS485
tx_pin_2: '17'
rx_pin_2: '18'
# canbus_esp32_can: CAN
tx_pin_4: '6'
rx_pin_4: '7'
packages:
device_base: !include ../base/device_base.yaml
device_base_wifi: !include ../base/device_base_wifi.yaml
esp32:
board: esp32-s3-devkitc-1
variant: esp32s3
flash_size: 16MB # ajust according to your ESP32-S3 version
cpu_frequency: 240MHz
framework:
type: esp-idf
esphome:
platformio_options:
board_build.flash_mode: dio # use Dual IO (dio) instead of Quad IO (qio) to prevent boot loop after flashing
wifi:
id: my_network
ssid: !secret wifi_ssid
password: !secret wifi_password
domain: !secret domain
# ESPHome does not support W5500 and other SPI devices at the same SPI bus:
# https://github.com/esphome/esphome/discussions/6720
# ethernet:
# id: my_network
# type: W5500
# clk_pin: 12
# mosi_pin: 11
# miso_pin: 13
# cs_pin: 10
# interrupt_pin: 9
# reset_pin: 48
# clock_speed: 40MHz
logger:
baud_rate: 0 # frees the 3rd UART and avoids some bugs like "WK2168 with canbus" or "BLE client with RS485 modbus"
# SPI for ethernet/LCD/LoRa
spi:
- id: lilygo_spi_bus
clk_pin: 12
mosi_pin: 11
miso_pin: 13
# I2C for touch controller CST226SE
i2c:
sda: 39
scl: 40
touchscreen:
- platform: cst226
id: my_touchscreen
interrupt_pin: 3
reset_pin: 47
display:
# T-Connect-Pro display
# https://esphome.io/components/display/ili9xxx
- platform: ili9xxx
spi_id: lilygo_spi_bus
id: my_display
model: ST7796
cs_pin: 21
dc_pin: 41
transform:
swap_xy: true
mirror_x: true
mirror_y: true
dimensions:
height: 222
width: 480
offset_height: 49
offset_width: 0
invert_colors: true
color_palette: 8BIT
update_interval: 10s
data_rate: 40Mhz
# Define a PWM output for the display backlight
output:
- platform: ledc
pin: 46
id: backlight_pwm
# ESP32 board without LED
- platform: template
id: esp_output
type: binary
write_action:
- logger.log: "Inverter Heartbeat Output"
# Define a monochromatic, dimmable light for the backlight
light:
- platform: monochromatic
output: backlight_pwm
name: "Display Backlight"
id: back_light
restore_mode: RESTORE_DEFAULT_ON
# ESP Light used to see the inverter heartbeat
# Internal : only specifying an id without a name will implicitly set this to true.
- platform: binary
id: esp_light
output: esp_output
# Relay: IO8
switch:
- platform: gpio
name: "Relay"
icon: "mdi:electric-switch"
pin:
number: GPIO8
inverted: true
mode: OUTPUT_OPEN_DRAIN
restore_mode: RESTORE_DEFAULT_OFF
@@ -1,5 +1,5 @@
# Updated : 2025.04.01
# Version : 1.1.2
# Updated : 2025.06.12
# Version : 1.1.3
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -22,6 +22,7 @@
substitutions:
board_chip: "ESP32-S3"
board_name: "LilyGo T-Connect"
# Interfaces GPIOs
# uart_esp_1
tx_pin_1: '4'
rx_pin_1: '5'
@@ -43,14 +44,13 @@ substitutions:
packages:
device_base: !include ../base/device_base.yaml
device_base_wifi: !include ../base/device_base_wifi.yaml
device_cpu_freq_240: !include board_options_cpu_freq_240_esp32-s3.yaml
board_rgb_led: !include board_options_rgb_led_status.yaml
# psram: !include board_options_psram_settings.yaml
esp32:
board: esp32-s3-devkitc-1
variant: esp32s3
flash_size: 16MB # ajust according to your ESP32-S3 version
cpu_frequency: 240MHz
framework:
type: esp-idf
@@ -58,17 +58,11 @@ esphome:
platformio_options:
board_build.flash_mode: dio # use Dual IO (dio) instead of Quad IO (qio) to prevent boot loop after flashing
# PSRAM activation with default options
# psram:
# mode: octal
# speed: 80MHz
wifi:
id: my_network
ssid: !secret wifi_ssid
password: !secret wifi_password
domain: !secret domain
ap:
logger:
baud_rate: 0 # frees the 3rd UART and avoids some bugs like "WK2168 with canbus" or "BLE client with RS485 modbus"
@@ -1,5 +1,5 @@
# Updated : 2025.05.30
# Version : 1.1.1
# Updated : 2025.06.12
# Version : 1.1.3
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -22,15 +22,13 @@
substitutions:
board_chip: "ESP32-S3"
board_name: "Touch LCD 4.3"
# Interfaces GPIOs
# uart_esp_1 UART (USB-C) port
tx_pin_1: '43'
rx_pin_1: '44'
# uart_esp_2 RS485 port
tx_pin_2: '15'
rx_pin_2: '16'
# uart_esp_3
tx_pin_3: ''
rx_pin_3: ''
# canbus_esp32_can USB / CAN port
tx_pin_4: '20'
rx_pin_4: '19'
@@ -46,12 +44,12 @@ substitutions:
packages:
device_base: !include ../base/device_base.yaml
device_base_wifi: !include ../base/device_base_wifi.yaml
device_cpu_freq_240: !include board_options_cpu_freq_240_esp32-s3.yaml
esp32:
board: esp32-s3-devkitc-1
variant: esp32s3
flash_size: 8MB
cpu_frequency: 240MHz
framework:
type: esp-idf
sdkconfig_options:
@@ -103,7 +101,7 @@ output:
write_action:
- logger.log: "Inverter Heartbeat Output"
#- lambda: C++ code; # action to be performed at each inverter heartbeat
# Enable CAN TJA1051 chip
- platform: gpio
id: USB_SEL
@@ -1,5 +1,5 @@
# Updated : 2025.05.30
# Version : 1.1.1
# Updated : 2025.06.12
# Version : 1.1.3
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -22,15 +22,13 @@
substitutions:
board_chip: "ESP32-S3"
board_name: "Touch LCD 7"
# Interfaces GPIOs
# uart_esp_1 UART1 (USB-C) / UART2 port (UART selection switch SW1)
tx_pin_1: '43'
rx_pin_1: '44'
# uart_esp_2 RS485 port
tx_pin_2: '15'
rx_pin_2: '16'
# uart_esp_3
tx_pin_3: ''
rx_pin_3: ''
# canbus_esp32_can USB / CAN port
tx_pin_4: '20'
rx_pin_4: '19'
@@ -46,12 +44,12 @@ substitutions:
packages:
device_base: !include ../base/device_base.yaml
device_base_wifi: !include ../base/device_base_wifi.yaml
device_cpu_freq_240: !include board_options_cpu_freq_240_esp32-s3.yaml
esp32:
board: esp32-s3-devkitc-1
variant: esp32s3
flash_size: 8MB
cpu_frequency: 240MHz
framework:
type: esp-idf
sdkconfig_options:
@@ -103,7 +101,7 @@ output:
write_action:
- logger.log: "Inverter Heartbeat Output"
#- lambda: C++ code; # action to be performed at each inverter heartbeat
# Enable CAN TJA1051 chip
- platform: gpio
id: USB_SEL
+4 -9
View File
@@ -1,5 +1,5 @@
# Updated : 2025.04.01
# Version : 1.1.3
# Updated : 2025.06.12
# Version : 1.1.4
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -20,6 +20,7 @@
substitutions:
board_chip: "ESP32-S3"
board_name: "DevKitC-1"
# Interfaces GPIOs
# uart_esp_1
tx_pin_1: '1'
rx_pin_1: '2'
@@ -41,12 +42,11 @@ substitutions:
packages:
device_base: !include ../base/device_base.yaml
device_base_wifi: !include ../base/device_base_wifi.yaml
device_cpu_freq_240: !include board_options_cpu_freq_240_esp32-s3.yaml
# psram: !include board_options_psram_settings.yaml
esp32:
board: esp32-s3-devkitc-1
flash_size: 8MB # adjust according to your ESP32-S3 version
cpu_frequency: 240MHz
framework:
type: esp-idf
@@ -54,11 +54,6 @@ esphome:
platformio_options:
board_build.flash_mode: dio # use Dual IO (dio) instead of Quad IO (qio) to prevent boot loop after flashing
# PSRAM activation with default options
# psram:
# mode: octal
# speed: 80MHz
wifi:
id: my_network
ssid: !secret wifi_ssid
Loaded 100 of 135 files, more files were not shown because too many files have changed in this diff. Show more