Files
esphome-yambms/packages/bms
Andrew Rankin a7e190b8e1 EG4 LL-V2: no General alarm for a full pack, component v1.1.4 (#349)
Fixes #342

* EG4 LL-V2: no General alarm for a full pack, component v1.1.2

EG4 packs hold protection bit 12 ("Low Capacity") while they are full and
have stopped charging, and it clears once they discharge. It was mapped to
General alarm, so every full charge raised a YamBMS alarm and sent it to
the inverter over CAN (#342). It is no longer mapped.

Discharge over temperature (0x0200) and discharge under temperature
(0x0800) protection were not mapped; they now raise the high and low
temperature alarms, as charge OT/UT already raise the charge ones.

Component v1.1.2 tracks each register block on its own
(RAR/esphome-eg4-bms#9): a pack goes offline when either block stops
giving valid replies, and that block's sensors publish NaN, so the
bitmask lambda now reads a NaN bitmask as no bits.

* EG4 LL-V2: component v1.1.3 (bus turnaround gap)

v1.1.2 took packs offline on a shared bus: a request sent right after
another pack's reply was often not answered. v1.1.3 waits a turnaround
time (50 ms) after each reply (RAR/esphome-eg4-bms#9).

* EG4 LL-V2: update date and version of the changed YAMLs
* EG4 LL-V2: component v1.1.4 (only the awaited reply ends the wait)
2026-11-16 20:50:55 +01:00
..