MrPabloUK
6634abed64
Fix link to LilyGo T-Connect in README ( #207 )
2026-02-06 00:55:20 +01:00
MrPabloUK
447a18b832
Component Fault Registry & Advanced LED Control ( #194 )
2026-02-05 09:26:49 +01:00
Sleeper85
d4e0ff02d6
Fixed issue #187
2026-02-02 14:25:04 +01:00
Sleeper85
54661754df
Updated CAN bus link readme
2026-01-31 14:42:43 +01:00
MrPabloUK
d44f3921dd
Added a new board_options_led_control.yaml file to manage LED behavior based on status sensors ( #179 )
...
- Adjusted light control logic to handle RGB settings and state changes more effectively.
- Introduced a new substitution `board_has_rgb` to indicate RGB functionality availability.
- Removed the deprecated `board_options_rgb_led_status.yaml` file.
- Enhanced CAN bus and RS485 configurations to include LED control based on device status.
- Updated T-Connect and YamBMS behaviour documentation
2026-01-30 19:31:36 +01:00
Sebastian
a9c8443a66
Provide connected BMS IDs to shunt ( #158 )
...
The `bms_ids` variable allows to provide an array of BMS IDs that are connected to this shunt.
If one or more BMS from this array are offline, the shunt is not used anymore (Combine = Disabled). This avoids returning a wrong SOC when not all batteries are online/available anymore.
If the BMS goes online again, the shunt is then used again.
This variable is optional. If not provided, the shunt work independently from the BMS online status.
Examples:
```
bms_ids: '{1}'
bms_ids: '{1, 2}'
bms_ids: '{4, 5, 6}'
```
2026-01-26 21:31:46 +01:00
MrPabloUK
60aaabc85b
Update Auto_temp-based_current.md ( #176 )
...
Corrected example discharging_rate_table.
2026-01-26 18:39:32 +01:00
Sleeper85
18d8306de5
YamBMS 1.6.0 readme
2026-01-15 18:54:26 +01:00
Sleeper85
0576a51842
Correction: AI was replaced with BI
2026-01-14 15:44:19 +01:00
MrPabloUK
8490f9c4ad
CCL, DCL and Auto Temp Current Control ( #147 )
...
* CCL, DCL and Auto Temp Current Control
* Added following:
- Update temperature based current derating, now uses calibrate_linear
- Revised CCL and DCL to correctly apply derating when multiple functions are enabled
- Added diagnostic sensor showing derating reason
* Changed referenced sensor for Auto DCP temperature derating
* Updated Auto Temp logic
* Add documentation, rename package
2026-01-06 18:01:45 +01:00
Sleeper85
e57196ee5d
Improved Interfaces Support Capacity section
2025-12-29 22:06:43 +01:00
Sleeper85
c5086d52ea
Removing unnecessary links
2025-12-29 16:29:15 +01:00
Sleeper85
92c177be3b
Horizontal alignment of images
2025-12-29 16:14:55 +01:00
Sleeper85
32b6e5e8c1
Update Charging_logic.md
2025-12-29 15:50:43 +01:00
Sleeper85
dc7470a008
Update Charging_logic.md
2025-12-29 15:46:46 +01:00
Sleeper85
0caee3801c
Improved Cut-Off charging logic equation and documentation (PR #143 )
2025-12-29 15:36:57 +01:00
Sleeper85
f3e77c327f
Improved Board documentation
2025-12-29 13:49:30 +01:00
Sleeper85
1888ca31dc
Added LilyGo and Waveshare readme
2025-12-28 23:53:41 +01:00
Sleeper85
1a7f83f9ec
Documentation of the new calculation of the maximum current
2025-12-28 20:03:29 +01:00
kolins-cz
7c5523eaf4
Add Studer XTM-4000 to supported inverters ( #133 )
2025-12-10 12:50:07 +00:00
Sleeper85
93730d856d
YamBMS 1.6.0 - Updated README
2025-12-01 23:12:10 +01:00
Sleeper85
592a19e87c
JK-PB Erase History Data function
2025-11-19 23:00:51 +01:00
Sleeper85
46049be161
Fixed link to Downgrading to 19.10
2025-11-16 15:23:27 +01:00
Sleeper85
cba6716eeb
Updated JK-PB readme with V19 warning and SoC 100% reset solution 1 and 2
2025-11-16 15:11:55 +01:00
Sleeper85
d6f211fdd3
Added Waveshare ESP32-S3-RS485-CAN
2025-11-14 23:27:10 +01:00
Sleeper85
fbea8d3ffc
Hardware highlighted and changelog moved
2025-11-14 23:08:34 +01:00
Sleeper85
65a2729073
Merge pull request #76 from GHswitt
...
Add Auto EOC function
2025-08-14 18:53:02 +02:00
Sebastian
fffd7c6087
Add support for external balancer
...
This adds support for external balancers, for example NEEY using JK BLE.
2025-08-14 15:01:51 +02:00
Sebastian
60e96b1cd8
Add Auto EOC function
...
This function allows to set a target time when `Bulk` charging.
It limits the `Requested Charge Current (CCL)` so the battery should
reach full charge at the specified time.
2025-08-13 20:44:27 +02:00
Sleeper85
f6f564de01
MCU default GPIOs
2025-07-31 20:44:53 +02:00
Sleeper85
ee003598cd
Improved JK-PB SoC 100% reset readme
2025-07-30 12:34:22 +02:00
Sleeper85
2d0a602e70
Improved Auto functions readme
2025-07-30 12:08:28 +02:00
Sleeper85
9c7c22444b
Updated JK-PB doc about SoC 100% reset
2025-07-30 09:15:49 +02:00
Sleeper85
f4e9811805
YamBMS 1.5.8 - New YamBMS LP and RP documentation
2025-07-29 17:02:29 +02:00
Sleeper85
ca43d7a310
Update README
2025-07-24 21:18:54 +02:00
Sleeper85
ed4dc7f522
Update JK-PB doc - 120 Ohm bus resistor and SoC 100% reset
2025-07-24 21:00:00 +02:00
Sleeper85
a6e4f24df5
Update YamBMS_functions.md
2025-06-23 13:11:09 +02:00
Sleeper85
345181c185
YamBMS 1.5.7 - Auto Float function
2025-06-19 22:11:27 +02:00
k2dp2k
a74a69a740
Fix typo and DEYE CAN module calculation
2025-06-08 21:52:02 +02:00
Sleeper85
b3445c5e3c
Important notes regarding BMS configuration.
2025-05-16 10:16:46 +02:00
Sleeper85
74587aa5f7
Update BMS_JK-B.md
2025-04-25 13:33:57 +02:00
Sleeper85
ec10e09c18
Update JK-B readme
2025-04-23 17:20:50 +02:00
Sleeper85
82493b0a6a
Update README
2025-04-20 22:37:27 +02:00
Sleeper85
d0601905e6
Update README
2025-04-07 20:29:00 +02:00
Sleeper85
63bce3f027
Update README
2025-04-04 00:48:56 +02:00
Sleeper85
4115a33d87
Merge pull request #33 from 20after4/olimex-evb
...
Board package for olimex ESP32-EVB
2025-03-09 22:30:22 +01:00
Sleeper85
4d52c3bbf8
Merge pull request #30 from ogremustcrush/main
...
Update Supported_devices.md to add SRNE HESP48120U200-H
2025-03-09 22:25:54 +01:00
Mukunda Modell
3f9956f4d5
Board package for olimex ESP32-EVB
2025-03-08 05:35:15 -06:00
Sleeper85
da658defd8
Update README
2025-02-20 16:43:04 +01:00
ogremustcrush
4a0f3c6090
Update Supported_devices.md to add SRNE HESP48120U200-H
2025-02-07 12:05:34 -07:00