Commit Graph
77 Commits
Author SHA1 Message Date
Sleeper85 dbb7dcd779 Delete CANBUS_protocol.md 2026-02-09 08:29:46 +01:00
MrPabloUK 6634abed64 Fix link to LilyGo T-Connect in README (#207) 2026-02-06 00:55:20 +01:00
MrPabloUK 447a18b832 Component Fault Registry & Advanced LED Control (#194) 2026-02-05 09:26:49 +01:00
Sleeper85 d4e0ff02d6 Fixed issue #187 2026-02-02 14:25:04 +01:00
Sleeper85 54661754df Updated CAN bus link readme 2026-01-31 14:42:43 +01:00
MrPabloUK d44f3921dd Added a new board_options_led_control.yaml file to manage LED behavior based on status sensors (#179)
- Adjusted light control logic to handle RGB settings and state changes more effectively.
- Introduced a new substitution `board_has_rgb` to indicate RGB functionality availability.
- Removed the deprecated `board_options_rgb_led_status.yaml` file.
- Enhanced CAN bus and RS485 configurations to include LED control based on device status.
- Updated T-Connect and YamBMS behaviour documentation
2026-01-30 19:31:36 +01:00
Sebastian a9c8443a66 Provide connected BMS IDs to shunt (#158)
The `bms_ids` variable allows to provide an array of BMS IDs that are connected to this shunt.

If one or more BMS from this array are offline, the shunt is not used anymore (Combine = Disabled). This avoids returning a wrong SOC when not all batteries are online/available anymore.

If the BMS goes online again, the shunt is then used again.

This variable is optional. If not provided, the shunt work independently from the BMS online status.

Examples:
```
bms_ids: '{1}'
bms_ids: '{1, 2}'
bms_ids: '{4, 5, 6}'
```
2026-01-26 21:31:46 +01:00
MrPabloUK 60aaabc85b Update Auto_temp-based_current.md (#176)
Corrected example discharging_rate_table.
2026-01-26 18:39:32 +01:00
Sleeper85 18d8306de5 YamBMS 1.6.0 readme 2026-01-15 18:54:26 +01:00
Sleeper85 0576a51842 Correction: AI was replaced with BI 2026-01-14 15:44:19 +01:00
MrPabloUK 8490f9c4ad CCL, DCL and Auto Temp Current Control (#147)
* CCL, DCL and Auto Temp Current Control

* Added following:
- Update temperature based current derating, now uses calibrate_linear
- Revised CCL and DCL to correctly apply derating when multiple functions are enabled
- Added diagnostic sensor showing derating reason
* Changed referenced sensor for Auto DCP temperature derating
* Updated Auto Temp logic
* Add documentation, rename package
2026-01-06 18:01:45 +01:00
Sleeper85 e57196ee5d Improved Interfaces Support Capacity section 2025-12-29 22:06:43 +01:00
Sleeper85 c5086d52ea Removing unnecessary links 2025-12-29 16:29:15 +01:00
Sleeper85 92c177be3b Horizontal alignment of images 2025-12-29 16:14:55 +01:00
Sleeper85 32b6e5e8c1 Update Charging_logic.md 2025-12-29 15:50:43 +01:00
Sleeper85 dc7470a008 Update Charging_logic.md 2025-12-29 15:46:46 +01:00
Sleeper85 0caee3801c Improved Cut-Off charging logic equation and documentation (PR #143) 2025-12-29 15:36:57 +01:00
Sleeper85 f3e77c327f Improved Board documentation 2025-12-29 13:49:30 +01:00
Sleeper85 1888ca31dc Added LilyGo and Waveshare readme 2025-12-28 23:53:41 +01:00
Sleeper85 1a7f83f9ec Documentation of the new calculation of the maximum current 2025-12-28 20:03:29 +01:00
kolins-cz 7c5523eaf4 Add Studer XTM-4000 to supported inverters (#133) 2025-12-10 12:50:07 +00:00
Sleeper85 93730d856d YamBMS 1.6.0 - Updated README 2025-12-01 23:12:10 +01:00
Sleeper85 592a19e87c JK-PB Erase History Data function 2025-11-19 23:00:51 +01:00
Sleeper85 46049be161 Fixed link to Downgrading to 19.10 2025-11-16 15:23:27 +01:00
Sleeper85 cba6716eeb Updated JK-PB readme with V19 warning and SoC 100% reset solution 1 and 2 2025-11-16 15:11:55 +01:00
Sleeper85 d6f211fdd3 Added Waveshare ESP32-S3-RS485-CAN 2025-11-14 23:27:10 +01:00
Sleeper85 fbea8d3ffc Hardware highlighted and changelog moved 2025-11-14 23:08:34 +01:00
Sleeper85 65a2729073 Merge pull request #76 from GHswitt
Add Auto EOC function
2025-08-14 18:53:02 +02:00
Sebastian fffd7c6087 Add support for external balancer
This adds support for external balancers, for example NEEY using JK BLE.
2025-08-14 15:01:51 +02:00
Sebastian 60e96b1cd8 Add Auto EOC function
This function allows to set a target time when `Bulk` charging.
It limits the `Requested Charge Current (CCL)` so the battery should
reach full charge at the specified time.
2025-08-13 20:44:27 +02:00
Sleeper85 f6f564de01 MCU default GPIOs 2025-07-31 20:44:53 +02:00
Sleeper85 ee003598cd Improved JK-PB SoC 100% reset readme 2025-07-30 12:34:22 +02:00
Sleeper85 2d0a602e70 Improved Auto functions readme 2025-07-30 12:08:28 +02:00
Sleeper85 9c7c22444b Updated JK-PB doc about SoC 100% reset 2025-07-30 09:15:49 +02:00
Sleeper85 f4e9811805 YamBMS 1.5.8 - New YamBMS LP and RP documentation 2025-07-29 17:02:29 +02:00
Sleeper85 ca43d7a310 Update README 2025-07-24 21:18:54 +02:00
Sleeper85 ed4dc7f522 Update JK-PB doc - 120 Ohm bus resistor and SoC 100% reset 2025-07-24 21:00:00 +02:00
Sleeper85 a6e4f24df5 Update YamBMS_functions.md 2025-06-23 13:11:09 +02:00
Sleeper85 345181c185 YamBMS 1.5.7 - Auto Float function 2025-06-19 22:11:27 +02:00
k2dp2k a74a69a740 Fix typo and DEYE CAN module calculation 2025-06-08 21:52:02 +02:00
Sleeper85 b3445c5e3c Important notes regarding BMS configuration. 2025-05-16 10:16:46 +02:00
Sleeper85 74587aa5f7 Update BMS_JK-B.md 2025-04-25 13:33:57 +02:00
Sleeper85 ec10e09c18 Update JK-B readme 2025-04-23 17:20:50 +02:00
Sleeper85 82493b0a6a Update README 2025-04-20 22:37:27 +02:00
Sleeper85 d0601905e6 Update README 2025-04-07 20:29:00 +02:00
Sleeper85 63bce3f027 Update README 2025-04-04 00:48:56 +02:00
Sleeper85 4115a33d87 Merge pull request #33 from 20after4/olimex-evb
Board package for olimex ESP32-EVB
2025-03-09 22:30:22 +01:00
Sleeper85 4d52c3bbf8 Merge pull request #30 from ogremustcrush/main
Update Supported_devices.md to add SRNE HESP48120U200-H
2025-03-09 22:25:54 +01:00
Mukunda Modell 3f9956f4d5 Board package for olimex ESP32-EVB 2025-03-08 05:35:15 -06:00
Sleeper85 da658defd8 Update README 2025-02-20 16:43:04 +01:00