36 Commits
Author SHA1 Message Date
Sleeper85 faad9e60ce YamBMS 1.8.1 LP/RP examples
Update the root YAML and the examples for the UART and CAN declarations, the
RS485 block and the Board Options section.
2026-11-08 23:08:34 +01:00
Sleeper85 6973cee171 PVbrain2 board split into two DevKitC-1 pin variants
The DevKitC-1 swapped the RGB LED between V1.0 (GPIO 48) and V1.1 (GPIO 38),
and the freed pin is the one PVbrain2 uses for CAN TX. Both pins are therefore
board-revision dependent and cannot stay hardcoded in a single board file.

board_ESP32-S3_DevKitC-1_PVbrain2.yaml becomes the common base :
- tx_pin_4 / rx_pin_4 and the LED strip pin are removed from it
- esp_light now reads ${rgb_led_pin}
- GPLv3 header added, which was missing

Two thin wrappers provide the revision-specific pins and include the base :
- board_ESP32-S3_DevKitC-1_PVbrain2_LED-48.yaml : V1.0, LED 48 / CAN TX 38
- board_ESP32-S3_DevKitC-1_PVbrain2_LED-38.yaml : V1.1, LED 38 / CAN TX 48

YamBMS_LP_PVbrain2.yaml and YamBMS_RP_PVbrain2.yaml include the LED-48 variant,
the LED-38 line being commented right next to it.

Same split applied to the RS485 Pylontech package : the content moves to
yambms_rs485_pylon_core.yaml and yambms_rs485_pylon.yaml keeps only the uart
baud_rate extend, so PVbrain2 — whose board already declares the UART — can
include the core directly.

PCB LED 1 / PCB LED 2 / ESP32 LED are no longer prefixed by ${name}, and the
`name` substitution is added to the PVbrain2 root YAMLs.
2026-11-08 23:08:33 +01:00
Sleeper85 bd01a127ab YamBMS 1.8.0 examples 2026-11-08 23:08:32 +01:00
Sleeper85 9ddd618da7 Added loop_task_stack_size option + documentation #306 2026-11-08 23:08:32 +01:00
Sleeper85 978c634eb9 Improved YamBMS 1.7.1 Cut-Off charging logic 2026-11-08 23:08:32 +01:00
Sleeper85 50c6e3b246 YamBMS 1.7.0 examples 2026-06-29 01:54:55 +02:00
Sleeper85 a19890bc0d Added the canbus_link_timer_enabled option #268 2026-06-28 14:59:44 +02:00
Sleeper85 9bcb4d7177 New yambms_id format 2026-06-28 00:09:39 +02:00
Sleeper85 ad0480c5bb YamBMS 1.7.0 - Added sub-devices comments 2026-03-24 20:06:54 +01:00
Sleeper85 d178ffa5c8 YamBMS 1.7.0 examples (2026.02.16) 2026-02-16 15:15:21 +01:00
Sleeper85 c988dfd91d YamBMS 1.7.0 PVbrain2 examples 2026-02-05 17:51:01 +01:00
Sleeper85 3412d1d332 YamBMS 1.7.0 examples 2026-02-05 11:45:11 +01:00
MrPabloUK 447a18b832 Component Fault Registry & Advanced LED Control (#194) 2026-02-05 09:26:49 +01:00
MrPabloUK d44f3921dd Added a new board_options_led_control.yaml file to manage LED behavior based on status sensors (#179)
- Adjusted light control logic to handle RGB settings and state changes more effectively.
- Introduced a new substitution `board_has_rgb` to indicate RGB functionality availability.
- Removed the deprecated `board_options_rgb_led_status.yaml` file.
- Enhanced CAN bus and RS485 configurations to include LED control based on device status.
- Updated T-Connect and YamBMS behaviour documentation
2026-01-30 19:31:36 +01:00
Sleeper85 0266f518ee YamBMS 1.6.0 2026-01-14 21:55:03 +01:00
Sleeper85 b730958aa9 Fixed temp-based discharging_rate_table 2026-01-07 13:02:14 +01:00
Sleeper85 463798084c Fixed temp-based charging_rate_table 2026-01-06 21:44:51 +01:00
MrPabloUK 8490f9c4ad CCL, DCL and Auto Temp Current Control (#147)
* CCL, DCL and Auto Temp Current Control

* Added following:
- Update temperature based current derating, now uses calibrate_linear
- Revised CCL and DCL to correctly apply derating when multiple functions are enabled
- Added diagnostic sensor showing derating reason
* Changed referenced sensor for Auto DCP temperature derating
* Updated Auto Temp logic
* Add documentation, rename package
2026-01-06 18:01:45 +01:00
Sleeper85 b2c5f65478 Reorganization of variables 2025-12-09 02:45:05 +01:00
Sebastian b2f4fb5b87 Add explanation for Temperature-based current limitation calculation (#118) 2025-11-26 00:13:22 +01:00
Sleeper85 dcbf3e6b8a YamBMS 1.6.0 - 2025.11.23 2025-11-24 14:34:30 +01:00
Sleeper85 bcc36b78fd YamBMS 1.5.9 main YAML 2025-08-14 20:05:19 +02:00
Sleeper85 7290a24946 YamBMS 1.5.8 - Added WiFi AP 2025-08-12 23:01:05 +02:00
Sleeper85 b4e6262793 YamBMS 1.5.8 - Web Server v3 2025-08-11 16:18:29 +02:00
Sleeper85 f4e9811805 YamBMS 1.5.8 - New YamBMS LP and RP documentation 2025-07-29 17:02:29 +02:00
Sleeper85 e45184cc27 YamBMS 1.5.8 - reorganized YAML 2025-07-28 17:44:18 +02:00
Sleeper85 c25d3eed21 YamBMS 1.5.8 2025-07-13 23:59:41 +02:00
Sebastian 77f657415a Add options to restrict max. charge and discharge current
This adds 'yambms_max_inverter_charge_current' and 'yambms_max_inverter_discharge_current' substitutions. They are used to restrict the range of the charge/discharge current for easier control when the battery currents are much higher than the inverter currents.
2025-07-12 21:00:14 +02:00
Sleeper85 348f7f2e0c YamBMS 1.5.7 - Improved comments regarding entity id and display name 2025-06-26 14:28:03 +02:00
Sleeper85 a0cfea8b5d YamBMS 1.5.7 2025-06-19 22:12:34 +02:00
Sleeper85 660ff99b5c YamBMS 1.5.6 2025-06-12 21:51:06 +02:00
k2dp2k 71a7643ca2 chore: update headers for recent changes 2025-06-10 20:16:56 +02:00
k2dp2k 679baa2068 chore: remove trailing whitespace for yamllint 2025-06-08 22:04:16 +02:00
Sleeper85 9c4897d87e YamBMS 1.5.5 - Fix double name issue after HA PR #143049
https://github.com/home-assistant/core/pull/143049
2025-05-13 12:11:36 +02:00
Sleeper85 669dee91d4 YamBMS Local Packages 1.5.5 2025-04-04 23:06:55 +02:00
Sleeper85 06ed27e8f0 YamBMS Local Packages 1.5.5 2025-04-04 01:15:18 +02:00