Sebastian
f924af33f4
Update temperature sensor filters to reduce noise ( #155 )
...
* Update BMS min/max temperature filters to filter out noise
* Add filters for Basen temperature sensors
- Basen temperature sensors only have full integer resolution. Add additional filters to reduce noise.
* Update filter for min/max temperature
- Change filters for min/max temperature to reduce noise introduced by changes in the lowest bit (0.1°C). Otherwise this noise will be forwarded by auto temp based current to the requrested charge/discharge current and therefore to the inverter.
2026-01-14 09:20:48 +01:00
Sleeper85
78e8b21977
Dual counter for entering and exiting the Cut-Off phase
2026-01-13 18:57:42 +01:00
Sleeper85
daf2e4fec3
Delete LP_BMS_example_SEPLOS_V3_RS485_sniffer.yaml
2026-01-13 17:57:25 +01:00
Sleeper85
b730958aa9
Fixed temp-based discharging_rate_table
2026-01-07 13:02:14 +01:00
Sleeper85
463798084c
Fixed temp-based charging_rate_table
2026-01-06 21:44:51 +01:00
MrPabloUK
8490f9c4ad
CCL, DCL and Auto Temp Current Control ( #147 )
...
* CCL, DCL and Auto Temp Current Control
* Added following:
- Update temperature based current derating, now uses calibrate_linear
- Revised CCL and DCL to correctly apply derating when multiple functions are enabled
- Added diagnostic sensor showing derating reason
* Changed referenced sensor for Auto DCP temperature derating
* Updated Auto Temp logic
* Add documentation, rename package
2026-01-06 18:01:45 +01:00
MrPabloUK
c810ae8f10
Updated AutoCCL & AutoDCL explanation, real time control of AutoCVL ( #144 )
2025-12-30 22:12:18 +01:00
Sleeper85
bcde473157
Update MCU_default_GPIOs.png
2025-12-29 22:39:25 +01:00
Sleeper85
e57196ee5d
Improved Interfaces Support Capacity section
2025-12-29 22:06:43 +01:00
Sleeper85
c5086d52ea
Removing unnecessary links
2025-12-29 16:29:15 +01:00
Sleeper85
92c177be3b
Horizontal alignment of images
2025-12-29 16:14:55 +01:00
Sleeper85
32b6e5e8c1
Update Charging_logic.md
2025-12-29 15:50:43 +01:00
Sleeper85
dc7470a008
Update Charging_logic.md
2025-12-29 15:46:46 +01:00
Sleeper85
0caee3801c
Improved Cut-Off charging logic equation and documentation (PR #143 )
2025-12-29 15:36:57 +01:00
Sleeper85
f3e77c327f
Improved Board documentation
2025-12-29 13:49:30 +01:00
Sleeper85
1888ca31dc
Added LilyGo and Waveshare readme
2025-12-28 23:53:41 +01:00
Sleeper85
1a7f83f9ec
Documentation of the new calculation of the maximum current
2025-12-28 20:03:29 +01:00
Sleeper85
1da3bf9e59
Changed uart_esp_3 GPIOs
2025-12-25 19:24:00 +01:00
Sleeper85
6722216f86
Adjust bms_name to something unique #122
2025-12-23 21:15:21 +01:00
Sleeper85
f081a348e4
Updated Power gauge (-10kW to 10kW)
2025-12-23 20:13:25 +01:00
Sleeper85
a3bd991e2f
Added bms_prefix for SEPLOS V3 for better sub_device support
2025-12-23 14:47:52 +01:00
Sleeper85
e70960cf88
Balancer sub_device YAMLs
2025-12-23 13:06:40 +01:00
Sleeper85
0a6e42e1de
Changed sub_device version
2025-12-23 12:58:24 +01:00
Sleeper85
29d4078d1e
JK RS485 sniffer_id is no longer required
2025-12-23 12:25:13 +01:00
Sleeper85
ab5feb1718
Fixed dashboards following sub_device PR #134
2025-12-23 12:25:13 +01:00
Sleeper85
a343ee32ab
Fixed entity names following sub_device PR #134
2025-12-23 12:25:13 +01:00
Sleeper85
c0b4fee44f
Removed non-functional BMS_example_SEPLOS_V3_RS485.yaml
2025-12-23 12:25:13 +01:00
Sleeper85
47027b0437
File name without PCS
2025-12-23 12:18:10 +01:00
MrPabloUK
1804d41f48
Fix JK powertube temp device id ( #139 )
2025-12-18 22:26:02 +01:00
Andrew Rankin
59cb64181e
Correct min/max cells ( #140 )
2025-12-18 19:06:40 +00:00
Sleeper85
84eb560c66
Fixed bms and shunt modbus client sub_device_id
2025-12-18 00:21:32 +01:00
Sleeper85
6bc6b5b54e
Added talk_pin substitution
2025-12-17 22:57:13 +01:00
Sleeper85
2745bf9168
YAML BMS examples renamed
2025-12-17 22:13:24 +01:00
Sleeper85
da8e3f0200
Fixed sub_device
2025-12-17 22:04:05 +01:00
Sleeper85
e8cdadce56
JK RS485 cell balancing trigger voltage name
2025-12-17 19:36:30 +01:00
Sleeper85
eaf65ded61
Increase LFP cv_min to 3.375
2025-12-17 19:22:19 +01:00
MrPabloUK
547b824b5e
Sub device support ( #134 )
2025-12-17 00:42:53 +01:00
Sleeper85
a3fe73c3a2
Added the last PR #12421
2025-12-16 09:46:43 +01:00
Sleeper85
610309debf
Fixed battery_capacity_remaining DEMO dashboard
2025-12-15 10:50:41 +01:00
Sleeper85
c55ba4785c
Alignment of the DEMO dashboard with version 1.2.0 of BMS fake sensors
2025-12-15 10:39:01 +01:00
Andrew Rankin
a9394095d2
[EG4] Swap away from esphome modbus component ( #130 )
...
* Rebase was a mess, so re-adding based on the dev branch.
* updates for the 1.6.0 release / dev branch to compile.
* Update external component source version
* Updated the external component source version from main to v1.0.0.
* Update external component source version to v1.0.0
* Add an example for EG4.
2025-12-15 10:06:21 +01:00
Sleeper85
a6536155c4
Merge branch 'dev' of https://github.com/Sleeper85/esphome-yambms into dev
2025-12-15 09:44:50 +01:00
Sleeper85
ea30ea145c
BMS fake sensors 1.2.0
2025-12-15 09:39:27 +01:00
kolins-cz
7c5523eaf4
Add Studer XTM-4000 to supported inverters ( #133 )
2025-12-10 12:50:07 +00:00
Sleeper85
b2c5f65478
Reorganization of variables
2025-12-09 02:45:05 +01:00
Sleeper85
de6d37e308
YamBMS modbus dev YAMLs
2025-12-05 22:05:41 +01:00
Sleeper85
7e8b88f841
Fixed JK RS485 switch names (issue #123 )
2025-12-04 21:33:49 +01:00
Sleeper85
93730d856d
YamBMS 1.6.0 - Updated README
2025-12-01 23:12:10 +01:00
Sleeper85
942b7c6fbb
Added JK RS485 talk_pin examples
2025-12-01 18:34:44 +01:00
Sleeper85
d1e976123b
YamBMS 1.6.0 - dev branch example
2025-11-26 08:57:29 +01:00