193 Commits
Author SHA1 Message Date
Sleeper85 06d2b0fda0 YamBMS 1.5.6 changelog update 2025-06-19 21:49:16 +02:00
Sleeper85 74e36b5a4f YamBMS 1.5.6 - RP20450 RPi Pico Shunts Modbus Server 2025-06-19 08:42:12 +02:00
Sleeper85 fa0f1960cc Merge pull request #51 from GHswitt/PR_RP2040_Shunts
Support for RP2040
2025-06-19 02:46:00 +02:00
Sebastian e6e31c165c Add RP2040 example as Modbus server node for five Victron shunts 2025-06-18 23:20:09 +02:00
Sebastian b7c3eddee4 Add RP2040 support 2025-06-18 23:19:57 +02:00
Sleeper85 92ce28c041 New shunt_base_minimal.yaml for SmartShunt UART minimal version 2025-06-18 08:57:48 +02:00
Sleeper85 9d9769a205 YamBMS 1.5.6 - BASEN RS485 2025-06-17 20:52:24 +02:00
Sleeper85 60c875df23 BMS BASEN RS485 1.1.2 2025-06-17 20:50:28 +02:00
Sleeper85 a10e0085d8 Delete YamBMS_LP_BASEN-RS485.yaml 2025-06-17 20:49:49 +02:00
Sleeper85 d487b756bf Merge pull request #56 from GHswitt/PR_BasengreenBMS
Add support for Basengreen BMS
2025-06-17 20:22:09 +02:00
Sleeper85 9b4596bc43 BMS SEPLOS V1 V2 - Remove bms_combine.yaml 2025-06-17 01:20:49 +02:00
Sleeper85 7a447450cc Improved YamBMS template sensors ( device_class / state_class ) 2025-06-17 00:56:01 +02:00
Sleeper85 0ecc1df3e0 BMS JBD - Fixed issue #65 and added YAML examples 2025-06-16 19:54:50 +02:00
Sleeper85 e9fee50967 BMS EPLOS V1 V2 - splitting the combine YAML to sensors and adding an example YAML 2025-06-16 19:50:10 +02:00
Sleeper85 39543e8b9f Restore shunt_sensors_Junctek_KHF_UART.yaml 1.1.4 2025-06-15 13:10:33 +02:00
Sebastian 88c64f6ba4 Add example for Basengreen BMS 2025-06-15 12:55:19 +02:00
Sebastian 27649631fb Add support for Basengreen BMS
This add support for Basengreen BMS connected via RS485.
See https://github.com/GHswitt/esphome-basen
2025-06-15 12:55:16 +02:00
Sleeper85 e5fc628957 Fixing unit_of_measurement and state_class (bms_base.yaml) 2025-06-15 11:20:24 +02:00
Sleeper85 e6896837de Update README.md 2025-06-14 10:27:16 +02:00
Sleeper85 a353a63ade Update LilyGo T-Connect Pro 2025-06-14 10:18:26 +02:00
Sleeper85 9c5a87fbe7 YamBMS 1.5.6 - Adding LilyGo T-Connect Pro 2025-06-14 10:17:52 +02:00
Sleeper85 9ccbeb6b94 Merge pull request #44 from GHswitt/T-Connect-Pro
Add support for LilyGo T-Connect Pro
2025-06-14 09:51:37 +02:00
Sebastian 1d3a195d9a Add support for LilyGo T-Connect Pro
Add board configuration for https://lilygo.cc/products/t-connect-pro
See also: https://github.com/Xinyuan-LilyGO/T-Connect-Pro/tree/main

Display is disabled by default as updating it is slow and increases
the loop time to >100ms.
2025-06-13 22:00:31 +02:00
Sleeper85 d9cddd2461 Dashboard 1.5.6 - Fixed SoH 2025-06-13 10:12:49 +02:00
Sleeper85 3f50bc224b YamBMS 1.5.6 changelog
n
2025-06-12 23:29:09 +02:00
Sleeper85 777aa40339 Dashboards 1.5.6 2025-06-12 23:11:58 +02:00
Sleeper85 37e65b3036 Merge branch 'main' of https://github.com/Sleeper85/esphome-yambms 2025-06-12 21:51:19 +02:00
Sleeper85 660ff99b5c YamBMS 1.5.6 2025-06-12 21:51:06 +02:00
Sleeper85 214568c6ff Board 1.5.6 2025-06-12 20:51:18 +02:00
Sleeper85 665c25619c Fake charging cycles not internal 2025-06-12 20:49:38 +02:00
Sleeper85 7547ddb780 Max cycles offset to 3000 2025-06-12 20:48:06 +02:00
Sleeper85 6c4e710f45 Base 1.5.6 2025-06-12 20:46:27 +02:00
Sleeper85 a14452eb8e Create MCU_ESP32-S3_YBoard.png 2025-06-12 20:45:01 +02:00
Sleeper85 60291dee68 Merge pull request #61 from GHswitt/PR_Modbus0
Set Modbus BMS values to 0 when BMS goes offline
2025-06-12 20:41:48 +02:00
Sebastian 4a2f6aace1 Set Modbus BMS values to 0 when BMS goes offline 2025-06-12 20:23:10 +02:00
Sleeper85 dec2f7e4f8 Merge pull request #62 from GHswitt/PR_Modbus_Charging_Cycles
Modbus client: Make charging cycles available again
2025-06-12 07:51:06 +02:00
Sebastian 4a8f60817d Modbus client: Make charging cycles available again 2025-06-11 23:22:52 +02:00
Sleeper85 d727463717 Updating Charging Cycles Offset function 2025-06-11 16:58:48 +02:00
Sleeper85 d7ed15c557 Requirements ESPHome 2025.5.0 2025-06-10 21:59:39 +02:00
Sleeper85 1bc7bdfd67 Merge pull request #60 from k2dp2k/main - YamBMS 1.5.6
* Compatibility with `esphome 2025.5.0`
  * Fixed [issue #55](https://github.com/Sleeper85/esphome-yambms/issues/55)
  * Added [feature #32](https://github.com/Sleeper85/esphome-yambms/issues/35) 
  * Added [feature #32](https://github.com/Sleeper85/esphome-yambms/issues/35)
  * New `board_ESP32-S3_YBoard_DJK.yaml` board
2025-06-10 21:57:31 +02:00
Sleeper85 5159e75d62 Update YamBMS 1.5.6 changelog 2025-06-10 21:54:26 +02:00
Sleeper85 8afc7d1eb4 YamBMS 1.5.6 changelog 2025-06-10 21:50:55 +02:00
Sleeper85 ee919ad1f0 Update yambms_canbus.yaml version 2025-06-10 21:45:21 +02:00
Sleeper85 95e0b240ca Update bms_sensors_DEYE_CAN_module_full.yaml version 2025-06-10 21:42:05 +02:00
Sleeper85 a4ccbde14a Update bms_charging_cycles_base.yaml version 2025-06-10 21:40:05 +02:00
Sleeper85 297eb96363 Update bms_battery_soh.yaml version 2025-06-10 21:38:36 +02:00
Sleeper85 82fbdd29f2 Update and rename YamBMS_RP_YBoard_JK-PB_RS485_Modbus_BLE_Shunt.yaml to YamBMS_LP_YBoard_JK-PB_RS485_Modbus.yaml 2025-06-10 21:36:08 +02:00
Sleeper85 0b9eb99e33 Delete .github/workflows/yamllint.yml 2025-06-10 21:31:13 +02:00
Sleeper85 b312d3eb3e Update yambms_config.yaml version 2025-06-10 21:30:03 +02:00
Sleeper85 3209ec910b Update device_base.yaml version 2025-06-10 21:28:58 +02:00
Sleeper85 9da27a5a8b Update yambms_auto_dcl.yaml version 2025-06-10 21:27:54 +02:00
Sleeper85 31260f3ace Update yambms_auto_cvl.yaml version 2025-06-10 21:27:21 +02:00
Sleeper85 0c731d52fc Update yambms_auto_cvl.yaml version 2025-06-10 21:26:21 +02:00
Sleeper85 afec9413dd Update yambms_auto_ccl.yaml version 2025-06-10 21:25:40 +02:00
Sleeper85 a2da3ac19c Update shunt_sensors_Junctek_KHF_UART.yaml version 2025-06-10 21:24:38 +02:00
Sleeper85 afc259c62c Update board_options_rgb_led_status.yaml version 2025-06-10 21:23:39 +02:00
Sleeper85 c2943bac36 Update board_options_cpu_freq_240_esp32.yaml version 2025-06-10 21:22:55 +02:00
Sleeper85 76ed9e0d48 Update board_options_cpu_freq_240_esp32-s3.yaml version 2025-06-10 21:22:28 +02:00
Sleeper85 f3e35028b8 Update board_ESP32_DevKitC_espBerry_2-CH-CAN.yaml version 2025-06-10 21:20:51 +02:00
Sleeper85 e1dd4202ae Update board_ESP32-S3_YBoard_DJK.yaml version 2025-06-10 21:20:20 +02:00
Sleeper85 1ea2e7d66f Update board_ESP32-S3_Touch-LCD-7.yaml version 2025-06-10 21:19:29 +02:00
Sleeper85 15179db113 Update board_ESP32-S3_Touch-LCD-4.3.yaml version 2025-06-10 21:19:01 +02:00
Sleeper85 83e74563b6 Update board_ESP32-S3_AtomS3_ili9xxx.yaml version 2025-06-10 21:18:26 +02:00
Sleeper85 f858597a2b Update board_ESP32-S3_AtomS3_WOD.yaml version 2025-06-10 21:17:57 +02:00
Sleeper85 5c20e87f50 Update board_ESP32-S3_AtomS3R.yaml version 2025-06-10 21:17:23 +02:00
Sleeper85 a67202a70f Update board_ESP32-S3_AtomS3.yaml version 2025-06-10 21:16:43 +02:00
Sleeper85 bdd8e234d9 Update bms_temperature_sensor_6.yaml version 2025-06-10 21:15:58 +02:00
Sleeper85 6d56f796a1 Update bms_temperature_sensor_5.yaml version 2025-06-10 21:15:28 +02:00
Sleeper85 76f6046961 Update bms_temperature_sensor_4.yaml version 2025-06-10 21:14:17 +02:00
Sleeper85 7c7097fa0b Update bms_temperature_sensor_2.yaml version 2025-06-10 21:13:32 +02:00
Sleeper85 86f39195e8 Update bms_sensors_JK_UART_4G-GPS_full.yaml version 2025-06-10 21:12:47 +02:00
Sleeper85 42973d9c9d Update bms_sensors_JK_RS485_Modbus_bms_standard.yaml version 2025-06-10 21:12:16 +02:00
Sleeper85 592274bc59 Update bms_sensors_JK_RS485_Modbus_bms_full.yaml version 2025-06-10 21:11:41 +02:00
Sleeper85 ab04cc92db Update bms_sensors_JK_RS485_Modbus_JK-B_standard.yaml version 2025-06-10 21:11:05 +02:00
Sleeper85 33056b2437 Update bms_sensors_JK_BLE_standard.yaml version 2025-06-10 21:10:09 +02:00
Sleeper85 c1597bd502 Update bms_sensors_JBD_UART_full.yaml version 2025-06-10 21:09:23 +02:00
Sleeper85 d65226a1f9 Update bms_sensors_JBD_BLE_full.yaml version 2025-06-10 21:08:28 +02:00
Sleeper85 558f1bfa47 Update bms_sensors_FAKE.yaml version 2025-06-10 21:07:39 +02:00
Sleeper85 1d71cf895e Update bms_sensors_DEYE_CAN_top_minimal.yaml version 2025-06-10 21:06:05 +02:00
Sleeper85 506e019d6f Update bms_sensors_DEYE_CAN_top_full.yaml 2025-06-10 21:05:22 +02:00
Sleeper85 2284b7db51 Update bms_sensors_DEYE_CAN_module_minimal.yaml version 2025-06-10 21:04:31 +02:00
Sleeper85 cf874f0a0f Update bms_errors_bitmask_JK_UART_4G-GPS.yaml version 2025-06-10 21:03:36 +02:00
Sleeper85 e76a7b4695 Update bms_errors_bitmask_JK_RS485_Modbus.yaml version 2025-06-10 21:02:33 +02:00
Sleeper85 844a74887e Update bms_errors_bitmask_JK_BLE.yaml version 2025-06-10 21:02:04 +02:00
Sleeper85 623c66839a Update bms_errors_bitmask_JBD.yaml version 2025-06-10 21:01:14 +02:00
Sleeper85 726fafd79f Update bms_errors_bitmask_DEYE_CAN.yaml version 2025-06-10 21:00:39 +02:00
Sleeper85 e60f802a68 Update bms_combine_modbus_client.yaml version 2025-06-10 21:00:17 +02:00
Sleeper85 60ed5c132c Update bms_combine_SEPLOS_V1_V2_RS485_bms_full.yaml version 2025-06-10 20:59:43 +02:00
Sleeper85 cd9bd987df Update bms_combine_JK_UART_4G-GPS_minimal.yaml version 2025-06-10 20:59:07 +02:00
Sleeper85 f7a39d6b55 Update bms_combine_JK_RS485_Modbus_sniffer_talk_pin.yaml version 2025-06-10 20:57:22 +02:00
Sleeper85 cea0d98e62 Update bms_combine_JK_RS485_Modbus_sniffer.yaml version 2025-06-10 20:56:41 +02:00
Sleeper85 ada25f475b Update bms_combine_JK_RS485_Modbus_bms_minimal.yaml version 2025-06-10 20:55:49 +02:00
Sleeper85 d0f252265e Update bms_combine_JK_RS485_DISPLAY_full.yaml version 2025-06-10 20:55:15 +02:00
Sleeper85 308ec5f032 Update bms_combine_JK_BLE_V14_full.yaml version 2025-06-10 20:54:14 +02:00
Sleeper85 e9d1239c01 Update bms_combine_DEYE_CAN_module_minimal.yaml version 2025-06-10 20:52:57 +02:00
Sleeper85 58c6429d9c Update bms_combine_DEYE_CAN_module_full.yaml version 2025-06-10 20:51:45 +02:00
Sleeper85 9c747934a4 Update bms_combine_JK_BLE_full.yaml version 2025-06-10 20:50:58 +02:00
Sleeper85 58c50ffe8b Update bms_combine_JK_BLE_minimal.yaml version 2025-06-10 20:48:55 +02:00
k2dp2k 43d70f647f Update YamBMS_RP_YBoard_JK-PB_RS485_Modbus_BLE_Shunt.yaml 2025-06-10 20:30:53 +02:00
k2dp2k 30d428c4fc Rename yam-board.yaml to YamBMS_RP_YBoard_JK-PB_RS485_Modbus_BLE_Shunt.yaml 2025-06-10 20:29:49 +02:00
k2dp2k b4887912af Merge pull request #11 from k2dp2k/codex/zustandsklasse-für-yambms-wiederherstellen
Fix state_class for BMS charging cycle sensor
2025-06-10 20:26:16 +02:00
k2dp2k c9b12fbe87 Set charging cycle sensor state_class to total 2025-06-10 20:25:31 +02:00
k2dp2k 060e44c07d Update device_base.yaml 2025-06-10 20:24:57 +02:00
k2dp2k c3b5f5f88a Update board_options_cpu_freq_240_esp32.yaml 2025-06-10 20:24:05 +02:00
k2dp2k 0272cea3ca Update board_options_cpu_freq_240_esp32-s3.yaml 2025-06-10 20:23:43 +02:00
k2dp2k 64e4c7f0e0 Update device_base.yaml 2025-06-10 20:22:34 +02:00
k2dp2k 7a1d68a3f3 Update device_base.yaml 2025-06-10 20:21:34 +02:00
k2dp2k 1939298992 Merge pull request #10 from k2dp2k/codex/header-in-geänderte-dateien-aktualisieren
Update headers after recent changes
2025-06-10 20:17:26 +02:00
k2dp2k 71a7643ca2 chore: update headers for recent changes 2025-06-10 20:16:56 +02:00
k2dp2k 2a26d7822d Update YamBMS_HA_Dashboard_JK_RS485_3xBMS.yaml 2025-06-08 23:41:10 +02:00
k2dp2k 492c81b9a3 Update YamBMS_HA_Dashboard_JK_RS485_3xBMS.yaml 2025-06-08 23:27:22 +02:00
k2dp2k 45c9cd2efc Merge pull request #9 from k2dp2k/codex/begrenze-charging-cycles-auf-200-und-update-cycle-capacity
Fix cycle capacity calculation
2025-06-08 23:09:20 +02:00
k2dp2k 124688e83f Limit cycle base and improve cycle capacity 2025-06-08 23:09:04 +02:00
k2dp2k 309b43b565 Merge pull request #8 from k2dp2k/codex/füge-manuelle-anpassung-des-cyclecounts-hinzu
Add manual cycle count adjustment
2025-06-08 22:45:56 +02:00
k2dp2k 7a78cf5672 Add adjustable cycle capacity 2025-06-08 22:45:08 +02:00
k2dp2k a11f2b75c8 Add adjustable charging cycles 2025-06-08 22:36:01 +02:00
k2dp2k c83d93874b Merge pull request #7 from k2dp2k/codex/restlaufzeit-zähler-hinzufügen
Add remaining time sensor
2025-06-08 22:30:22 +02:00
k2dp2k c426efa321 Add template sensor for remaining time 2025-06-08 22:30:10 +02:00
k2dp2k 0cabeeced8 Add remaining time sensor for Junctek shunt 2025-06-08 22:22:23 +02:00
k2dp2k 75e2ac8155 Merge pull request #6 from k2dp2k/codex/code-optimieren-im-verzeichnis-packages
Optimize display update timing
2025-06-08 22:11:23 +02:00
k2dp2k 7ca041c8c6 Improve display refresh rate 2025-06-08 22:10:58 +02:00
k2dp2k 0834b934d7 Merge pull request #5 from k2dp2k/codex/probleme-mit-yamllint-beheben
Fix yamllint issues
2025-06-08 22:05:07 +02:00
k2dp2k 679baa2068 chore: remove trailing whitespace for yamllint 2025-06-08 22:04:16 +02:00
k2dp2k 197ecd0957 Update yam-board.yaml 2025-06-08 22:01:06 +02:00
k2dp2k 37d2b3b320 Merge pull request #4 from k2dp2k/codex/datei-umbenennen-in-board_esp32-s3_yboard_djk.yaml
Rename board file
2025-06-08 21:58:36 +02:00
k2dp2k ce351bf7e8 Rename board_YamBoard_Deye_JK.yaml to board_ESP32-S3_YBoard_DJK.yaml 2025-06-08 21:58:10 +02:00
k2dp2k 2f53ed1eb2 meine configfile 2025-06-08 21:57:40 +02:00
k2dp2k 9e9024225d Merge pull request #3 from k2dp2k/codex/finde-probleme-und-mache-vorschläge
Fix docs typo and update DEYE CAN sensors
2025-06-08 21:52:45 +02:00
k2dp2k a74a69a740 Fix typo and DEYE CAN module calculation 2025-06-08 21:52:02 +02:00
k2dp2k 358a87ca2f Merge pull request #2 from k2dp2k/codex/fix-deprecation-warnings-in-esphome-configuration
Update to new ESPHome schema
2025-06-08 21:33:01 +02:00
k2dp2k 2139aee6d8 Update for ESPHome 2025.5 2025-06-08 21:32:49 +02:00
k2dp2k f0b79ad78c Merge pull request #1 from k2dp2k/codex/fehler-in-codebasis-suchen-und-beheben
Fix typo in modbus baud rate comments
2025-06-08 21:27:56 +02:00
k2dp2k a5ae54f8ad Fix Modbus baud rate comments and nominal voltage variable 2025-06-08 21:27:20 +02:00
k2dp2k 933003c4a9 Add files via upload 2025-06-08 21:19:12 +02:00
Sleeper85 c51e694197 Update board_ESP32-S3_Touch-LCD-4.3.yaml 2025-05-30 14:49:36 +02:00
Sleeper85 802511f4d6 Adds Waveshare LCD Touch boards 2025-05-30 14:22:49 +02:00
Sleeper85 c83eddecd0 Merge branch 'main' of https://github.com/Sleeper85/esphome-yambms 2025-05-30 09:15:53 +02:00
Sleeper85 cf95333a36 Update README.md 2025-05-30 09:15:40 +02:00
Sleeper85 5bb5eb99ad Merge pull request #50 from GHswitt/PR/Deye_Throttle
DEYE: Add throttle to some values
2025-05-21 00:32:26 +02:00
Sebastian f5592a005e Deye: Throttle operating mode 2025-05-20 22:59:57 +02:00
Sebastian b1e6af7a57 Deye: Throttle charge/discharge current as it fluctuates 2025-05-20 22:59:13 +02:00
Sleeper85 5e8ac7f3b1 Fixed Shunt SoC sensor name 2025-05-19 15:15:08 +02:00
Sleeper85 34722c13ce Merge branch 'main' of https://github.com/Sleeper85/esphome-yambms 2025-05-16 10:17:51 +02:00
Sleeper85 b3445c5e3c Important notes regarding BMS configuration. 2025-05-16 10:16:46 +02:00
Sleeper85 9859d4b0be Merge pull request #45 from GHswitt/PR_Modbus
Add Modbus server files for JK BMS (RS485) and DEYE (CAN)
2025-05-15 12:02:01 +02:00
Sebastian 6926f9ef9b Add Modbus server file for DEYE connected via CAN 2025-05-15 11:57:34 +02:00
Sebastian fca0b6848d Add Modbus server file for JK BMS connected via RS485 2025-05-15 11:57:30 +02:00
Sleeper85 9b22639405 Update README.md 2025-05-15 09:16:34 +02:00
Sleeper85 692eb525ca Merge pull request #49 from GHswitt/SmartShunt_Minimal
Add minimal versions for Victron SmartShunt via Modbus
2025-05-14 17:34:33 +02:00
Sleeper85 d56c2f1457 Merge pull request #48 from GHswitt/PR_README_Data_Collection
Inform in README.md about statistics collection
2025-05-14 17:20:54 +02:00
Sleeper85 884d4219a6 Create board_ESP32-S3_AtomS3_WOD.yaml 2025-05-14 09:25:43 +02:00
Sleeper85 9c4897d87e YamBMS 1.5.5 - Fix double name issue after HA PR #143049
https://github.com/home-assistant/core/pull/143049
2025-05-13 12:11:36 +02:00
Sleeper85 6b7c178093 Fix double name issue after HA PR #143049
https://github.com/home-assistant/core/pull/143049
2025-05-11 16:07:40 +02:00
Sebastian 557721f7f7 Add minimal versions for Victron SmartShunt via Modbus 2025-04-30 22:33:00 +02:00
Sebastian be71ac9340 Inform in README.md about statistics collection 2025-04-27 23:31:02 +02:00
Sleeper85 74587aa5f7 Update BMS_JK-B.md 2025-04-25 13:33:57 +02:00
Sleeper85 ec10e09c18 Update JK-B readme 2025-04-23 17:20:50 +02:00
Sleeper85 0b5773c9c9 JK RS485 Modbus JK-B standard version 2025-04-21 14:35:12 +02:00
Sleeper85 82493b0a6a Update README 2025-04-20 22:37:27 +02:00
Sleeper85 e0ccd7d07d Merge pull request #37 from GHswitt/Deye_CAN_PCS
Add support for Deye CAN PCS batteries
2025-04-16 15:20:55 +02:00
Sebastian 525436db44 Add support for Deye CAN PCS batteries
This adds support for Deye batteries using the CAN PCS port of
the battery.
Via the PCS port the battery sends out the overall status and status
frames for each installed module. This commit was tested with
a battery with two Deye AI-W5.1 modules.

bms_combine_DEYE_CAN_module_full.yaml:
  Combination of the BMS parts. For each module.
bms_combine_DEYE_CAN_module_minimal.yaml:
  Minimum number of sensors.
bms_sensors_DEYE_CAN_top_full.yaml:
  Deye top unit data, required.
bms_sensors_DEYE_CAN_top_minimal.yaml:
  Deye top unit data with reduced number of sensors.
bms_can_DEYE_module_full.yaml:
  Deye battery module data.
bms_can_DEYE_module_minimal.yaml:
  Deye battery module data with reduced number of sensors.
bms_errors_bitmask_DEYE_CAN.yaml:
  Error mapping Deye -> yambms.
YamBMS_LP_DEYE-PCS_CAN.yaml:
  Example using LilyGo T-CAN485
  with MCP2515 as secondary CAN bus.

Signed-off-by: Sebastian Witt <seb.witt@googlemail.com>
2025-04-16 15:09:01 +02:00
Sebastian 5aed8e6267 Allow substitions for can_id and bit_rate for MCP2515
Signed-off-by: Sebastian Witt <seb.witt@googlemail.com>
2025-04-14 20:54:27 +02:00
Sleeper85 5fe8583799 Rounding the SoC 2025-04-14 20:01:50 +02:00
Sleeper85 01462622d5 Don't limit the flash size to 2MB for ETH01-EVO 2025-04-13 14:27:33 +02:00
Sleeper85 d0601905e6 Update README 2025-04-07 20:29:00 +02:00
Sleeper85 3775c108ee YamBMS Remote Packages 1.5.5 2025-04-07 19:25:49 +02:00
Sleeper85 b3bcfdef7e YamBMS Local Packages 1.5.5 2025-04-07 19:25:29 +02:00
Sleeper85 3c716fd085 ESP32-S3 DevKitC-1 with RGB LED on GPIOs 38 and 48 2025-04-07 19:23:12 +02:00
Sleeper85 7815119183 YamBMS 1.5.5 (fix Force Float charge status) 2025-04-07 16:40:24 +02:00
Sleeper85 3b490821fe Turn on BMS charge switch if EOC or Float 2025-04-07 16:37:50 +02:00
Sleeper85 1b6c28e954 YamBMS 1.5.5 (bms charging logic fix) 2025-04-07 10:22:34 +02:00
Sleeper85 2046f44507 Update README.md 2025-04-07 08:35:07 +02:00
Sleeper85 098546b65d Local Packages examples 1.5.5 (AtomS3 display_rotation) 2025-04-07 08:24:59 +02:00
Sleeper85 eeee80faa7 Remote Packages examples 1.5.5 (AtomS3 display_rotation) 2025-04-07 08:24:45 +02:00
Sleeper85 c0240d44ed AtomS3 display_rotation option 2025-04-07 08:23:25 +02:00
Sleeper85 822b3394f6 Update bms_base.yaml 2025-04-04 23:22:25 +02:00
Sleeper85 a538ba3e6e Remote Packages examples 1.5.5 2025-04-04 23:16:19 +02:00
Sleeper85 95b69225ea Local Packages examples 1.5.5 2025-04-04 23:15:38 +02:00
Sleeper85 eb9663b840 Remove LP RP examples 2025-04-04 23:14:36 +02:00
Sleeper85 d5df679b9a YamBMS Remote Packages 1.5.5 2025-04-04 23:07:14 +02:00
Sleeper85 669dee91d4 YamBMS Local Packages 1.5.5 2025-04-04 23:06:55 +02:00
Sleeper85 0424392349 Create yambms_custom.yaml 2025-04-04 22:58:52 +02:00
Sleeper85 c78bb0c465 Create yambms_config.yaml 2025-04-04 22:58:49 +02:00
Sleeper85 1f3231df5f Delete config folder 2025-04-04 22:57:27 +02:00
Sleeper85 264b83ea8b YamBMS Remote Packages 1.5.5 2025-04-04 01:46:05 +02:00
Sleeper85 529334683b Update README.md 2025-04-04 01:41:48 +02:00
Sleeper85 1c4634c820 YamBMS Remote Packages 1.5.5 2025-04-04 01:36:07 +02:00
Sleeper85 06ed27e8f0 YamBMS Local Packages 1.5.5 2025-04-04 01:15:18 +02:00
Sleeper85 de8927ce36 YamBMS 1.5.5 2025-04-04 01:13:49 +02:00
Sleeper85 3c846ea24a Board 1.5.5 2025-04-04 01:12:38 +02:00
Sleeper85 a5e6423d03 BMS 1.5.5 2025-04-04 01:08:10 +02:00
Sleeper85 44cb8504d3 Delete old YAML 2025-04-04 00:51:33 +02:00
Sleeper85 63bce3f027 Update README 2025-04-04 00:48:56 +02:00
185 changed files with 11812 additions and 4467 deletions

No files matched your search

@@ -1,5 +1,5 @@
# Updated : 2025.01.24
# Version : 1.5.4
# Updated : 2025.06.12
# Version : 1.5.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -26,7 +26,7 @@ views:
cards:
- graph: line
type: sensor
entity: sensor.yambms_demo_yambms_1_total_voltage_o
entity: sensor.yambms_demo_yambms_1_total_voltage
detail: 2
layout_options:
grid_columns: 2
@@ -40,7 +40,7 @@ views:
name: SoC
hours_to_show: 8
- type: gauge
entity: sensor.yambms_demo_yambms_1_current_s
entity: sensor.yambms_demo_yambms_1_current
needle: true
severity:
green: 0
@@ -53,7 +53,7 @@ views:
grid_columns: 2
grid_rows: 3
- type: gauge
entity: sensor.yambms_demo_yambms_1_power_s
entity: sensor.yambms_demo_yambms_1_power
needle: true
severity:
green: 0
@@ -66,16 +66,16 @@ views:
grid_columns: 2
grid_rows: 3
- type: tile
entity: sensor.yambms_demo_yambms_1_installed_battery_capacity_s
entity: sensor.yambms_demo_yambms_1_installed_battery_capacity
name: Installed Battery Capacity
- type: tile
entity: sensor.yambms_demo_yambms_1_battery_soh
name: Battery SoH
- type: tile
entity: sensor.yambms_demo_yambms_1_battery_capacity_s
entity: sensor.yambms_demo_yambms_1_battery_capacity
name: Battery Capacity
- type: tile
entity: sensor.yambms_demo_yambms_1_capacity_remaining_s
entity: sensor.yambms_demo_yambms_1_capacity_remaining
name: Capacity Remaining
- type: tile
entity: sensor.yambms_demo_yambms_1_delta_cell_voltage
@@ -398,16 +398,14 @@ views:
cards:
- type: markdown
content: >-
<center><b><font size=4>BMS SoC :&nbsp;&nbsp;<font
color=#41CD52 size=4>{{
states('sensor.yambms_demo_bms_1_battery_soc') }}
%</font></font>
<center><b><font size=4>SoC :&nbsp;&nbsp;<font color=#41CD52
size=4>{{ states('sensor.yambms_demo_bms_1_battery_soc')
}} %</font></font>
- type: markdown
content: >-
<center><b><font size=4>Corrected SoC :&nbsp;&nbsp;<font
color=#41CD52 size=4>{{
states('sensor.yambms_demo_bms_1_battery_soc') }}
%</font></font>
<center><b><font size=4>SoH :&nbsp;&nbsp;<font color=#41CD52
size=4>{{ states('sensor.yambms_demo_bms_1_battery_soh')
}} %</font></font>
- type: markdown
content: >-
<center> Battery Capacity :&nbsp;&nbsp;<font color=#41CD52>{{
@@ -415,7 +413,7 @@ views:
Cycle Capacity :&nbsp;&nbsp;<font color=#41CD52>12532 Ah</font><br>
Ave. Cell Vol. :&nbsp;&nbsp;<font color=#41CD52>3.329 V</font><br>
Balance Cur. :&nbsp;&nbsp;<font color=#41CD52>0.00 A</font><br>
Max temp. :&nbsp;&nbsp;<font color=#41CD52>{{
Max temp. :&nbsp;&nbsp;<font color=#41CD52>{{
states('sensor.yambms_demo_bms_1_max_temperature') }} °C</font>
- type: markdown
content: >-
@@ -425,7 +423,7 @@ views:
{{ states('sensor.yambms_demo_bms_1_charging_cycles') }}</font><br>
Delta Cell Vol. :&nbsp;&nbsp;<font color=#41CD52>0.007 V</font><br>
MOS temp. :&nbsp;&nbsp;<font color=#41CD52>25.6 °C</font><br>
Min temp. :&nbsp;&nbsp;<font color=#41CD52>{{
Min temp. :&nbsp;&nbsp;<font color=#41CD52>{{
states('sensor.yambms_demo_bms_1_min_temperature') }} °C</font>
- type: grid
square: false
@@ -557,16 +555,14 @@ views:
cards:
- type: markdown
content: >-
<center><b><font size=4>BMS SoC :&nbsp;&nbsp;<font
color=#41CD52 size=4>{{
states('sensor.yambms_demo_bms_2_battery_soc') }}
%</font></font>
<center><b><font size=4>SoC :&nbsp;&nbsp;<font color=#41CD52
size=4>{{ states('sensor.yambms_demo_bms_2_battery_soc')
}} %</font></font>
- type: markdown
content: >-
<center><b><font size=4>Corrected SoC :&nbsp;&nbsp;<font
color=#41CD52 size=4>{{
states('sensor.yambms_demo_bms_2_battery_soc') }}
%</font></font>
<center><b><font size=4>SoH :&nbsp;&nbsp;<font color=#41CD52
size=4>{{ states('sensor.yambms_demo_bms_2_battery_soh')
}} %</font></font>
- type: markdown
content: >-
<center> Battery Capacity :&nbsp;&nbsp;<font color=#41CD52>{{
@@ -574,7 +570,7 @@ views:
Cycle Capacity :&nbsp;&nbsp;<font color=#41CD52>12532 Ah</font><br>
Ave. Cell Vol. :&nbsp;&nbsp;<font color=#41CD52>3.329 V</font><br>
Balance Cur. :&nbsp;&nbsp;<font color=#41CD52>0.00 A</font><br>
Max temp. :&nbsp;&nbsp;<font color=#41CD52>{{
Max temp. :&nbsp;&nbsp;<font color=#41CD52>{{
states('sensor.yambms_demo_bms_2_max_temperature') }} °C</font>
- type: markdown
content: >-
@@ -584,7 +580,7 @@ views:
{{ states('sensor.yambms_demo_bms_2_charging_cycles') }}</font><br>
Delta Cell Vol. :&nbsp;&nbsp;<font color=#41CD52>0.007 V</font><br>
MOS temp. :&nbsp;&nbsp;<font color=#41CD52>25.6 °C</font><br>
Min temp. :&nbsp;&nbsp;<font color=#41CD52>{{
Min temp. :&nbsp;&nbsp;<font color=#41CD52>{{
states('sensor.yambms_demo_bms_2_min_temperature') }} °C</font>
- type: grid
square: false
@@ -716,16 +712,14 @@ views:
cards:
- type: markdown
content: >-
<center><b><font size=4>BMS SoC :&nbsp;&nbsp;<font
color=#41CD52 size=4>{{
states('sensor.yambms_demo_bms_3_battery_soc') }}
%</font></font>
<center><b><font size=4>SoC :&nbsp;&nbsp;<font color=#41CD52
size=4>{{ states('sensor.yambms_demo_bms_3_battery_soc')
}} %</font></font>
- type: markdown
content: >-
<center><b><font size=4>Corrected SoC :&nbsp;&nbsp;<font
color=#41CD52 size=4>{{
states('sensor.yambms_demo_bms_3_battery_soc') }}
%</font></font>
<center><b><font size=4>SoH :&nbsp;&nbsp;<font color=#41CD52
size=4>{{ states('sensor.yambms_demo_bms_3_battery_soh')
}} %</font></font>
- type: markdown
content: >-
<center> Battery Capacity :&nbsp;&nbsp;<font color=#41CD52>{{
@@ -733,7 +727,7 @@ views:
Cycle Capacity :&nbsp;&nbsp;<font color=#41CD52>12532 Ah</font><br>
Ave. Cell Vol. :&nbsp;&nbsp;<font color=#41CD52>3.329 V</font><br>
Balance Cur. :&nbsp;&nbsp;<font color=#41CD52>0.00 A</font><br>
Max temp. :&nbsp;&nbsp;<font color=#41CD52>{{
Max temp. :&nbsp;&nbsp;<font color=#41CD52>{{
states('sensor.yambms_demo_bms_3_max_temperature') }} °C</font>
- type: markdown
content: >-
@@ -743,7 +737,7 @@ views:
{{ states('sensor.yambms_demo_bms_3_charging_cycles') }}</font><br>
Delta Cell Vol. :&nbsp;&nbsp;<font color=#41CD52>0.007 V</font><br>
MOS temp. :&nbsp;&nbsp;<font color=#41CD52>25.6 °C</font><br>
Min temp. :&nbsp;&nbsp;<font color=#41CD52>{{
Min temp. :&nbsp;&nbsp;<font color=#41CD52>{{
states('sensor.yambms_demo_bms_3_min_temperature') }} °C</font>
- type: grid
square: false
@@ -1,5 +1,5 @@
# Updated : 2025.02.06
# Version : 1.5.4
# Updated : 2025.06.13
# Version : 1.5.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -26,7 +26,7 @@ views:
cards:
- graph: line
type: sensor
entity: sensor.yambms_yambms_1_total_voltage_o
entity: sensor.yambms_yambms_1_total_voltage
detail: 2
layout_options:
grid_columns: 2
@@ -40,7 +40,7 @@ views:
name: SoC
hours_to_show: 8
- type: gauge
entity: sensor.yambms_yambms_1_current_s
entity: sensor.yambms_yambms_1_current
needle: true
severity:
green: 0
@@ -53,7 +53,7 @@ views:
grid_columns: 2
grid_rows: 3
- type: gauge
entity: sensor.yambms_yambms_1_power_s
entity: sensor.yambms_yambms_1_power
needle: true
severity:
green: 0
@@ -66,16 +66,16 @@ views:
grid_columns: 2
grid_rows: 3
- type: tile
entity: sensor.yambms_yambms_1_installed_battery_capacity_s
entity: sensor.yambms_yambms_1_installed_battery_capacity
name: Installed Battery Capacity
- type: tile
entity: sensor.yambms_yambms_1_battery_soh
name: Battery SoH
- type: tile
entity: sensor.yambms_yambms_1_battery_capacity_s
entity: sensor.yambms_yambms_1_battery_capacity
name: Battery Capacity
- type: tile
entity: sensor.yambms_yambms_1_capacity_remaining_s
entity: sensor.yambms_yambms_1_capacity_remaining
name: Capacity Remaining
- type: tile
entity: sensor.yambms_yambms_1_delta_cell_voltage
@@ -401,23 +401,23 @@ views:
cards:
- type: markdown
content: >-
<center><b><font size=4>BMS SoC :&nbsp;&nbsp;<font
<center><b><font size=4>SoC :&nbsp;&nbsp;<font
color=#41CD52 size=4>{{
states('sensor.yambms_jk_bms_1_battery_capacity_state_of_charge') }}
states('sensor.yambms_jk_bms_1_battery_soc') }}
%</font></font>
- type: markdown
content: >-
<center><b><font size=4>Corrected SoC :&nbsp;&nbsp;<font
<center><b><font size=4>SoH :&nbsp;&nbsp;<font
color=#41CD52 size=4>{{
states('sensor.yambms_jk_bms_1_battery_soc') }}
%</font></font>
states('sensor.yambms_jk_bms_1_battery_soh_valuation') }}
%</font></font>
- type: markdown
content: >-
<center> Battery Capacity :&nbsp;&nbsp;<font color=#41CD52>{{
states('number.yambms_jk_bms_1_battery_capacity_total_setting')
}} Ah</font><br> Cycle Capacity :&nbsp;&nbsp;<font
color=#41CD52>{{
states('sensor.yambms_jk_bms_1_battery_capacity_total_charging_cycle')
states('sensor.yambms_jk_bms_1_total_charging_cycle_capacity')
}} Ah</font><br> Ave. Cell Vol. :&nbsp;&nbsp;<font
color=#41CD52>{{
states('sensor.yambms_jk_bms_1_cell_average_voltage') }}
@@ -670,6 +670,13 @@ views:
layout_options:
grid_columns: 2
grid_rows: 3
- type: entity-filter
entities:
- entity: number.yambms_jk_bms_1_charging_cycles_offset
name: Charging Cycles Offset
conditions:
- condition: state
state_not: unavailable
- type: grid
title: BMS 2
column_span: 1
@@ -747,23 +754,23 @@ views:
cards:
- type: markdown
content: >-
<center><b><font size=4>BMS SoC :&nbsp;&nbsp;<font
<center><b><font size=4>SoC :&nbsp;&nbsp;<font
color=#41CD52 size=4>{{
states('sensor.yambms_jk_bms_2_battery_capacity_state_of_charge') }}
states('sensor.yambms_jk_bms_2_battery_soc') }}
%</font></font>
- type: markdown
content: >-
<center><b><font size=4>Corrected SoC :&nbsp;&nbsp;<font
<center><b><font size=4>SoH :&nbsp;&nbsp;<font
color=#41CD52 size=4>{{
states('sensor.yambms_jk_bms_2_battery_soc') }}
%</font></font>
states('sensor.yambms_jk_bms_2_battery_soh_valuation') }}
%</font></font>
- type: markdown
content: >-
<center> Battery Capacity :&nbsp;&nbsp;<font color=#41CD52>{{
states('number.yambms_jk_bms_2_battery_capacity_total_setting')
}} Ah</font><br> Cycle Capacity :&nbsp;&nbsp;<font
color=#41CD52>{{
states('sensor.yambms_jk_bms_2_battery_capacity_total_charging_cycle')
states('sensor.yambms_jk_bms_2_total_charging_cycle_capacity')
}} Ah</font><br> Ave. Cell Vol. :&nbsp;&nbsp;<font
color=#41CD52>{{
states('sensor.yambms_jk_bms_2_cell_average_voltage') }}
@@ -1016,6 +1023,13 @@ views:
layout_options:
grid_columns: 2
grid_rows: 3
- type: entity-filter
entities:
- entity: number.yambms_jk_bms_2_charging_cycles_offset
name: Charging Cycles Offset
conditions:
- condition: state
state_not: unavailable
- type: grid
title: BMS 3
column_span: 1
@@ -1093,23 +1107,23 @@ views:
cards:
- type: markdown
content: >-
<center><b><font size=4>BMS SoC :&nbsp;&nbsp;<font
<center><b><font size=4>SoC :&nbsp;&nbsp;<font
color=#41CD52 size=4>{{
states('sensor.yambms_jk_bms_3_battery_capacity_state_of_charge') }}
states('sensor.yambms_jk_bms_3_battery_soc') }}
%</font></font>
- type: markdown
content: >-
<center><b><font size=4>Corrected SoC :&nbsp;&nbsp;<font
<center><b><font size=4>SoH :&nbsp;&nbsp;<font
color=#41CD52 size=4>{{
states('sensor.yambms_jk_bms_3_battery_soc') }}
%</font></font>
states('sensor.yambms_jk_bms_3_battery_soh_valuation') }}
%</font></font>
- type: markdown
content: >-
<center> Battery Capacity :&nbsp;&nbsp;<font color=#41CD52>{{
states('number.yambms_jk_bms_3_battery_capacity_total_setting')
}} Ah</font><br> Cycle Capacity :&nbsp;&nbsp;<font
color=#41CD52>{{
states('sensor.yambms_jk_bms_3_battery_capacity_total_charging_cycle')
states('sensor.yambms_jk_bms_3_total_charging_cycle_capacity')
}} Ah</font><br> Ave. Cell Vol. :&nbsp;&nbsp;<font
color=#41CD52>{{
states('sensor.yambms_jk_bms_3_cell_average_voltage') }}
@@ -1362,6 +1376,13 @@ views:
layout_options:
grid_columns: 2
grid_rows: 3
- type: entity-filter
entities:
- entity: number.yambms_jk_bms_3_charging_cycles_offset
name: Charging Cycles Offset
conditions:
- condition: state
state_not: unavailable
- title: Shunt
type: sections
max_columns: 3
@@ -1379,7 +1400,7 @@ views:
hours_to_show: 8
- graph: line
type: sensor
entity: sensor.yambms_shunt_1_soc
entity: sensor.yambms_shunt_1_state_of_charge
detail: 2
name: SoC
hours_to_show: 8
@@ -1417,7 +1438,7 @@ views:
name: Shunt 1 Current
- entity: sensor.yambms_shunt_1_power
name: Shunt 1 Power
- entity: sensor.yambms_shunt_1_soc
- entity: sensor.yambms_shunt_1_state_of_charge
name: Shunt 1 SoC
- entity: sensor.yambms_shunt_1_temperature
name: Shunt 1 Temperature
@@ -1,5 +1,5 @@
# Updated : 2025.02.06
# Version : 1.5.4
# Updated : 2025.06.13
# Version : 1.5.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -26,7 +26,7 @@ views:
cards:
- graph: line
type: sensor
entity: sensor.yambms_yambms_1_total_voltage_o
entity: sensor.yambms_yambms_1_total_voltage
detail: 2
layout_options:
grid_columns: 2
@@ -40,7 +40,7 @@ views:
name: SoC
hours_to_show: 8
- type: gauge
entity: sensor.yambms_yambms_1_current_s
entity: sensor.yambms_yambms_1_current
needle: true
severity:
green: 0
@@ -53,7 +53,7 @@ views:
grid_columns: 2
grid_rows: 3
- type: gauge
entity: sensor.yambms_yambms_1_power_s
entity: sensor.yambms_yambms_1_power
needle: true
severity:
green: 0
@@ -66,16 +66,16 @@ views:
grid_columns: 2
grid_rows: 3
- type: tile
entity: sensor.yambms_yambms_1_installed_battery_capacity_s
entity: sensor.yambms_yambms_1_installed_battery_capacity
name: Installed Battery Capacity
- type: tile
entity: sensor.yambms_yambms_1_battery_soh
name: Battery SoH
- type: tile
entity: sensor.yambms_yambms_1_battery_capacity_s
entity: sensor.yambms_yambms_1_battery_capacity
name: Battery Capacity
- type: tile
entity: sensor.yambms_yambms_1_capacity_remaining_s
entity: sensor.yambms_yambms_1_capacity_remaining
name: Capacity Remaining
- type: tile
entity: sensor.yambms_yambms_1_delta_cell_voltage
@@ -401,23 +401,23 @@ views:
cards:
- type: markdown
content: >-
<center><b><font size=4>BMS SoC :&nbsp;&nbsp;<font
<center><b><font size=4>SoC :&nbsp;&nbsp;<font
color=#41CD52 size=4>{{
states('sensor.yambms_jk_bms_1_battery_capacity_state_of_charge') }}
states('sensor.yambms_jk_bms_1_battery_soc') }}
%</font></font>
- type: markdown
content: >-
<center><b><font size=4>Corrected SoC :&nbsp;&nbsp;<font
<center><b><font size=4>SoH :&nbsp;&nbsp;<font
color=#41CD52 size=4>{{
states('sensor.yambms_jk_bms_1_battery_soc') }}
%</font></font>
states('sensor.yambms_jk_bms_1_battery_soh_valuation') }}
%</font></font>
- type: markdown
content: >-
<center> Battery Capacity :&nbsp;&nbsp;<font color=#41CD52>{{
states('number.yambms_jk_bms_1_battery_capacity_total_setting')
}} Ah</font><br> Cycle Capacity :&nbsp;&nbsp;<font
color=#41CD52>{{
states('sensor.yambms_jk_bms_1_battery_capacity_total_charging_cycle')
states('sensor.yambms_jk_bms_1_total_charging_cycle_capacity')
}} Ah</font><br> Ave. Cell Vol. :&nbsp;&nbsp;<font
color=#41CD52>{{
states('sensor.yambms_jk_bms_1_cell_average_voltage') }}
@@ -670,6 +670,13 @@ views:
layout_options:
grid_columns: 2
grid_rows: 3
- type: entity-filter
entities:
- entity: number.yambms_jk_bms_1_charging_cycles_offset
name: Charging Cycles Offset
conditions:
- condition: state
state_not: unavailable
- type: grid
title: BMS 2
column_span: 1
@@ -747,23 +754,23 @@ views:
cards:
- type: markdown
content: >-
<center><b><font size=4>BMS SoC :&nbsp;&nbsp;<font
<center><b><font size=4>SoC :&nbsp;&nbsp;<font
color=#41CD52 size=4>{{
states('sensor.yambms_jk_bms_2_battery_capacity_state_of_charge') }}
states('sensor.yambms_jk_bms_2_battery_soc') }}
%</font></font>
- type: markdown
content: >-
<center><b><font size=4>Corrected SoC :&nbsp;&nbsp;<font
<center><b><font size=4>SoH :&nbsp;&nbsp;<font
color=#41CD52 size=4>{{
states('sensor.yambms_jk_bms_2_battery_soc') }}
%</font></font>
states('sensor.yambms_jk_bms_2_battery_soh_valuation') }}
%</font></font>
- type: markdown
content: >-
<center> Battery Capacity :&nbsp;&nbsp;<font color=#41CD52>{{
states('number.yambms_jk_bms_2_battery_capacity_total_setting')
}} Ah</font><br> Cycle Capacity :&nbsp;&nbsp;<font
color=#41CD52>{{
states('sensor.yambms_jk_bms_2_battery_capacity_total_charging_cycle')
states('sensor.yambms_jk_bms_2_total_charging_cycle_capacity')
}} Ah</font><br> Ave. Cell Vol. :&nbsp;&nbsp;<font
color=#41CD52>{{
states('sensor.yambms_jk_bms_2_cell_average_voltage') }}
@@ -1016,6 +1023,13 @@ views:
layout_options:
grid_columns: 2
grid_rows: 3
- type: entity-filter
entities:
- entity: number.yambms_jk_bms_2_charging_cycles_offset
name: Charging Cycles Offset
conditions:
- condition: state
state_not: unavailable
- type: grid
title: BMS 3
column_span: 1
@@ -1093,23 +1107,23 @@ views:
cards:
- type: markdown
content: >-
<center><b><font size=4>BMS SoC :&nbsp;&nbsp;<font
<center><b><font size=4>SoC :&nbsp;&nbsp;<font
color=#41CD52 size=4>{{
states('sensor.yambms_jk_bms_3_battery_capacity_state_of_charge') }}
states('sensor.yambms_jk_bms_3_battery_soc') }}
%</font></font>
- type: markdown
content: >-
<center><b><font size=4>Corrected SoC :&nbsp;&nbsp;<font
<center><b><font size=4>SoH :&nbsp;&nbsp;<font
color=#41CD52 size=4>{{
states('sensor.yambms_jk_bms_3_battery_soc') }}
%</font></font>
states('sensor.yambms_jk_bms_3_battery_soh_valuation') }}
%</font></font>
- type: markdown
content: >-
<center> Battery Capacity :&nbsp;&nbsp;<font color=#41CD52>{{
states('number.yambms_jk_bms_3_battery_capacity_total_setting')
}} Ah</font><br> Cycle Capacity :&nbsp;&nbsp;<font
color=#41CD52>{{
states('sensor.yambms_jk_bms_3_battery_capacity_total_charging_cycle')
states('sensor.yambms_jk_bms_3_total_charging_cycle_capacity')
}} Ah</font><br> Ave. Cell Vol. :&nbsp;&nbsp;<font
color=#41CD52>{{
states('sensor.yambms_jk_bms_3_cell_average_voltage') }}
@@ -1362,6 +1376,13 @@ views:
layout_options:
grid_columns: 2
grid_rows: 3
- type: entity-filter
entities:
- entity: number.yambms_jk_bms_3_charging_cycles_offset
name: Charging Cycles Offset
conditions:
- condition: state
state_not: unavailable
- type: grid
title: BMS 4
column_span: 1
@@ -1439,23 +1460,23 @@ views:
cards:
- type: markdown
content: >-
<center><b><font size=4>BMS SoC :&nbsp;&nbsp;<font
<center><b><font size=4>SoC :&nbsp;&nbsp;<font
color=#41CD52 size=4>{{
states('sensor.yambms_jk_bms_4_battery_capacity_state_of_charge') }}
states('sensor.yambms_jk_bms_4_battery_soc') }}
%</font></font>
- type: markdown
content: >-
<center><b><font size=4>Corrected SoC :&nbsp;&nbsp;<font
<center><b><font size=4>SoH :&nbsp;&nbsp;<font
color=#41CD52 size=4>{{
states('sensor.yambms_jk_bms_4_battery_soc') }}
%</font></font>
states('sensor.yambms_jk_bms_4_battery_soh_valuation') }}
%</font></font>
- type: markdown
content: >-
<center> Battery Capacity :&nbsp;&nbsp;<font color=#41CD52>{{
states('number.yambms_jk_bms_4_battery_capacity_total_setting')
}} Ah</font><br> Cycle Capacity :&nbsp;&nbsp;<font
color=#41CD52>{{
states('sensor.yambms_jk_bms_4_battery_capacity_total_charging_cycle')
states('sensor.yambms_jk_bms_4_total_charging_cycle_capacity')
}} Ah</font><br> Ave. Cell Vol. :&nbsp;&nbsp;<font
color=#41CD52>{{
states('sensor.yambms_jk_bms_4_cell_average_voltage') }}
@@ -1708,6 +1729,13 @@ views:
layout_options:
grid_columns: 2
grid_rows: 3
- type: entity-filter
entities:
- entity: number.yambms_jk_bms_4_charging_cycles_offset
name: Charging Cycles Offset
conditions:
- condition: state
state_not: unavailable
- type: grid
title: BMS 5
column_span: 1
@@ -1785,23 +1813,23 @@ views:
cards:
- type: markdown
content: >-
<center><b><font size=4>BMS SoC :&nbsp;&nbsp;<font
<center><b><font size=4>SoC :&nbsp;&nbsp;<font
color=#41CD52 size=4>{{
states('sensor.yambms_jk_bms_5_battery_capacity_state_of_charge') }}
states('sensor.yambms_jk_bms_5_battery_soc') }}
%</font></font>
- type: markdown
content: >-
<center><b><font size=4>Corrected SoC :&nbsp;&nbsp;<font
<center><b><font size=4>SoH :&nbsp;&nbsp;<font
color=#41CD52 size=4>{{
states('sensor.yambms_jk_bms_5_battery_soc') }}
%</font></font>
states('sensor.yambms_jk_bms_5_battery_soh_valuation') }}
%</font></font>
- type: markdown
content: >-
<center> Battery Capacity :&nbsp;&nbsp;<font color=#41CD52>{{
states('number.yambms_jk_bms_5_battery_capacity_total_setting')
}} Ah</font><br> Cycle Capacity :&nbsp;&nbsp;<font
color=#41CD52>{{
states('sensor.yambms_jk_bms_5_battery_capacity_total_charging_cycle')
states('sensor.yambms_jk_bms_5_total_charging_cycle_capacity')
}} Ah</font><br> Ave. Cell Vol. :&nbsp;&nbsp;<font
color=#41CD52>{{
states('sensor.yambms_jk_bms_5_cell_average_voltage') }}
@@ -2054,6 +2082,13 @@ views:
layout_options:
grid_columns: 2
grid_rows: 3
- type: entity-filter
entities:
- entity: number.yambms_jk_bms_5_charging_cycles_offset
name: Charging Cycles Offset
conditions:
- condition: state
state_not: unavailable
- type: grid
title: BMS 6
column_span: 1
@@ -2131,23 +2166,23 @@ views:
cards:
- type: markdown
content: >-
<center><b><font size=4>BMS SoC :&nbsp;&nbsp;<font
<center><b><font size=4>SoC :&nbsp;&nbsp;<font
color=#41CD52 size=4>{{
states('sensor.yambms_jk_bms_6_battery_capacity_state_of_charge') }}
states('sensor.yambms_jk_bms_6_battery_soc') }}
%</font></font>
- type: markdown
content: >-
<center><b><font size=4>Corrected SoC :&nbsp;&nbsp;<font
<center><b><font size=4>SoH :&nbsp;&nbsp;<font
color=#41CD52 size=4>{{
states('sensor.yambms_jk_bms_6_battery_soc') }}
%</font></font>
states('sensor.yambms_jk_bms_6_battery_soh_valuation') }}
%</font></font>
- type: markdown
content: >-
<center> Battery Capacity :&nbsp;&nbsp;<font color=#41CD52>{{
states('number.yambms_jk_bms_6_battery_capacity_total_setting')
}} Ah</font><br> Cycle Capacity :&nbsp;&nbsp;<font
color=#41CD52>{{
states('sensor.yambms_jk_bms_6_battery_capacity_total_charging_cycle')
states('sensor.yambms_jk_bms_6_total_charging_cycle_capacity')
}} Ah</font><br> Ave. Cell Vol. :&nbsp;&nbsp;<font
color=#41CD52>{{
states('sensor.yambms_jk_bms_6_cell_average_voltage') }}
@@ -2400,6 +2435,13 @@ views:
layout_options:
grid_columns: 2
grid_rows: 3
- type: entity-filter
entities:
- entity: number.yambms_jk_bms_6_charging_cycles_offset
name: Charging Cycles Offset
conditions:
- condition: state
state_not: unavailable
- type: grid
title: BMS 7
column_span: 1
@@ -2477,23 +2519,23 @@ views:
cards:
- type: markdown
content: >-
<center><b><font size=4>BMS SoC :&nbsp;&nbsp;<font
<center><b><font size=4>SoC :&nbsp;&nbsp;<font
color=#41CD52 size=4>{{
states('sensor.yambms_jk_bms_7_battery_capacity_state_of_charge') }}
states('sensor.yambms_jk_bms_7_battery_soc') }}
%</font></font>
- type: markdown
content: >-
<center><b><font size=4>Corrected SoC :&nbsp;&nbsp;<font
<center><b><font size=4>SoH :&nbsp;&nbsp;<font
color=#41CD52 size=4>{{
states('sensor.yambms_jk_bms_7_battery_soc') }}
%</font></font>
states('sensor.yambms_jk_bms_7_battery_soh_valuation') }}
%</font></font>
- type: markdown
content: >-
<center> Battery Capacity :&nbsp;&nbsp;<font color=#41CD52>{{
states('number.yambms_jk_bms_7_battery_capacity_total_setting')
}} Ah</font><br> Cycle Capacity :&nbsp;&nbsp;<font
color=#41CD52>{{
states('sensor.yambms_jk_bms_7_battery_capacity_total_charging_cycle')
states('sensor.yambms_jk_bms_7_total_charging_cycle_capacity')
}} Ah</font><br> Ave. Cell Vol. :&nbsp;&nbsp;<font
color=#41CD52>{{
states('sensor.yambms_jk_bms_7_cell_average_voltage') }}
@@ -2746,6 +2788,13 @@ views:
layout_options:
grid_columns: 2
grid_rows: 3
- type: entity-filter
entities:
- entity: number.yambms_jk_bms_7_charging_cycles_offset
name: Charging Cycles Offset
conditions:
- condition: state
state_not: unavailable
- title: Shunt
type: sections
max_columns: 3
@@ -2763,7 +2812,7 @@ views:
hours_to_show: 8
- graph: line
type: sensor
entity: sensor.yambms_shunt_1_soc
entity: sensor.yambms_shunt_1_state_of_charge
detail: 2
name: SoC
hours_to_show: 8
@@ -2801,7 +2850,7 @@ views:
name: Shunt 1 Current
- entity: sensor.yambms_shunt_1_power
name: Shunt 1 Power
- entity: sensor.yambms_shunt_1_soc
- entity: sensor.yambms_shunt_1_state_of_charge
name: Shunt 1 SoC
- entity: sensor.yambms_shunt_1_temperature
name: Shunt 1 Temperature
@@ -1,5 +1,5 @@
# Updated : 2025.01.24
# Version : 1.5.4
# Updated : 2025.06.12
# Version : 1.5.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -26,7 +26,7 @@ views:
cards:
- graph: line
type: sensor
entity: sensor.yambms_yambms_1_total_voltage_o
entity: sensor.yambms_yambms_1_total_voltage
detail: 2
layout_options:
grid_columns: 2
@@ -40,7 +40,7 @@ views:
name: SoC
hours_to_show: 8
- type: gauge
entity: sensor.yambms_yambms_1_current_s
entity: sensor.yambms_yambms_1_current
needle: true
severity:
green: 0
@@ -53,7 +53,7 @@ views:
grid_columns: 2
grid_rows: 3
- type: gauge
entity: sensor.yambms_yambms_1_power_s
entity: sensor.yambms_yambms_1_power
needle: true
severity:
green: 0
@@ -66,16 +66,16 @@ views:
grid_columns: 2
grid_rows: 3
- type: tile
entity: sensor.yambms_yambms_1_installed_battery_capacity_s
entity: sensor.yambms_yambms_1_installed_battery_capacity
name: Installed Battery Capacity
- type: tile
entity: sensor.yambms_yambms_1_battery_soh
name: Battery SoH
- type: tile
entity: sensor.yambms_yambms_1_battery_capacity_s
entity: sensor.yambms_yambms_1_battery_capacity
name: Battery Capacity
- type: tile
entity: sensor.yambms_yambms_1_capacity_remaining_s
entity: sensor.yambms_yambms_1_capacity_remaining
name: Capacity Remaining
- type: tile
entity: sensor.yambms_yambms_1_delta_cell_voltage
@@ -401,16 +401,16 @@ views:
cards:
- type: markdown
content: >-
<center><b><font size=4>BMS SoC :&nbsp;&nbsp;<font
<center><b><font size=4>SoC :&nbsp;&nbsp;<font
color=#41CD52 size=4>{{
states('sensor.yambms_jk_bms_1_state_of_charge') }}
states('sensor.yambms_jk_bms_1_battery_soc') }}
%</font></font>
- type: markdown
content: >-
<center><b><font size=4>Corrected SoC :&nbsp;&nbsp;<font
<center><b><font size=4>SoH :&nbsp;&nbsp;<font
color=#41CD52 size=4>{{
states('sensor.yambms_jk_bms_1_battery_soc') }}
%</font></font>
states('sensor.yambms_jk_bms_1_battery_soh') }}
%</font></font>
- type: markdown
content: >-
<center> Battery Capacity :&nbsp;&nbsp;<font color=#41CD52>{{
@@ -670,6 +670,13 @@ views:
layout_options:
grid_columns: 2
grid_rows: 3
- type: entity-filter
entities:
- entity: number.yambms_jk_bms_1_charging_cycles_offset
name: Charging Cycles Offset
conditions:
- condition: state
state_not: unavailable
- type: grid
title: BMS 2
column_span: 1
@@ -747,16 +754,16 @@ views:
cards:
- type: markdown
content: >-
<center><b><font size=4>BMS SoC :&nbsp;&nbsp;<font
<center><b><font size=4>SoC :&nbsp;&nbsp;<font
color=#41CD52 size=4>{{
states('sensor.yambms_jk_bms_2_state_of_charge') }}
states('sensor.yambms_jk_bms_2_battery_soc') }}
%</font></font>
- type: markdown
content: >-
<center><b><font size=4>Corrected SoC :&nbsp;&nbsp;<font
<center><b><font size=4>SoH :&nbsp;&nbsp;<font
color=#41CD52 size=4>{{
states('sensor.yambms_jk_bms_2_battery_soc') }}
%</font></font>
states('sensor.yambms_jk_bms_2_battery_soh') }}
%</font></font>
- type: markdown
content: >-
<center> Battery Capacity :&nbsp;&nbsp;<font color=#41CD52>{{
@@ -1016,6 +1023,13 @@ views:
layout_options:
grid_columns: 2
grid_rows: 3
- type: entity-filter
entities:
- entity: number.yambms_jk_bms_2_charging_cycles_offset
name: Charging Cycles Offset
conditions:
- condition: state
state_not: unavailable
- type: grid
title: BMS 3
column_span: 1
@@ -1093,16 +1107,16 @@ views:
cards:
- type: markdown
content: >-
<center><b><font size=4>BMS SoC :&nbsp;&nbsp;<font
<center><b><font size=4>SoC :&nbsp;&nbsp;<font
color=#41CD52 size=4>{{
states('sensor.yambms_jk_bms_3_state_of_charge') }}
states('sensor.yambms_jk_bms_3_battery_soc') }}
%</font></font>
- type: markdown
content: >-
<center><b><font size=4>Corrected SoC :&nbsp;&nbsp;<font
<center><b><font size=4>SoH :&nbsp;&nbsp;<font
color=#41CD52 size=4>{{
states('sensor.yambms_jk_bms_3_battery_soc') }}
%</font></font>
states('sensor.yambms_jk_bms_3_battery_soh') }}
%</font></font>
- type: markdown
content: >-
<center> Battery Capacity :&nbsp;&nbsp;<font color=#41CD52>{{
@@ -1362,6 +1376,13 @@ views:
layout_options:
grid_columns: 2
grid_rows: 3
- type: entity-filter
entities:
- entity: number.yambms_jk_bms_3_charging_cycles_offset
name: Charging Cycles Offset
conditions:
- condition: state
state_not: unavailable
- title: Shunt
type: sections
max_columns: 3
@@ -1379,7 +1400,7 @@ views:
hours_to_show: 8
- graph: line
type: sensor
entity: sensor.yambms_shunt_1_soc
entity: sensor.yambms_shunt_1_state_of_charge
detail: 2
name: SoC
hours_to_show: 8
@@ -1417,7 +1438,7 @@ views:
name: Shunt 1 Current
- entity: sensor.yambms_shunt_1_power
name: Shunt 1 Power
- entity: sensor.yambms_shunt_1_soc
- entity: sensor.yambms_shunt_1_state_of_charge
name: Shunt 1 SoC
- entity: sensor.yambms_shunt_1_temperature
name: Shunt 1 Temperature
@@ -1,5 +1,5 @@
# Updated : 2024.11.11
# Version : 1.5.1
# Updated : 2025.06.12
# Version : 1.5.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -26,7 +26,7 @@ views:
cards:
- graph: line
type: sensor
entity: sensor.yambms_yambms_1_total_voltage_o
entity: sensor.yambms_yambms_1_total_voltage
detail: 2
layout_options:
grid_columns: 2
@@ -40,7 +40,7 @@ views:
name: SoC
hours_to_show: 8
- type: gauge
entity: sensor.yambms_yambms_1_current_s
entity: sensor.yambms_yambms_1_current
needle: true
severity:
green: 0
@@ -53,7 +53,7 @@ views:
grid_columns: 2
grid_rows: 3
- type: gauge
entity: sensor.yambms_yambms_1_power_s
entity: sensor.yambms_yambms_1_power
needle: true
severity:
green: 0
@@ -66,16 +66,16 @@ views:
grid_columns: 2
grid_rows: 3
- type: tile
entity: sensor.yambms_yambms_1_installed_battery_capacity_s
entity: sensor.yambms_yambms_1_installed_battery_capacity
name: Installed Battery Capacity
- type: tile
entity: sensor.yambms_yambms_1_battery_soh
name: Battery SoH
- type: tile
entity: sensor.yambms_yambms_1_battery_capacity_s
entity: sensor.yambms_yambms_1_battery_capacity
name: Battery Capacity
- type: tile
entity: sensor.yambms_yambms_1_capacity_remaining_s
entity: sensor.yambms_yambms_1_capacity_remaining
name: Capacity Remaining
- type: tile
entity: sensor.yambms_yambms_1_delta_cell_voltage
+62 -15
View File
@@ -8,7 +8,15 @@
[!["Buy Me A Coffee"](https://img.shields.io/badge/buy%20me%20a%20coffee-donate-yellow.svg)](https://www.buymeacoffee.com/sleeper85)
> [!TIP]
> If compiling the source code is too difficult for you, I can provide you a `custom firmware` that is easy to install from a web page. You can [contact me privately](https://diysolarforum.com/direct-messages/add?to=Sleeper85) on the DIY solar forum.
> Not sure which YAML to choose ? ... `YamBMS_Remote_Packages_example.yaml` is a good basis for creating your custom YAML.
> Examples of BMS and Shunt imports can be found in the [configuration_examples](configuration_examples/) folder.
> You can mix different BMS models, the only condition is that they are numbered in order starting from `1`.
> [!IMPORTANT]
> The most important thing for proper functioning of YamBMS is that **the voltage of your BMS is well calibrated**.
> YamBMS logic is based on the `min_cell_voltage` and `max_cell_voltage` voltages of your BMS.
> If you use YamBMS, the internal charging logic of the `JK-PB BMS` will not be used.
> Please read the [documentation](README.md#contents) and the [setup instructions](documents/README/Schematic_and_setup_instructions.md).
| ESPHome application to monitor BMS and communicate with inverters<br>supporting CAN bus protocol compatible with Pylontech, GoodWe, SMA,<br>Victron or Luxpower (EG4). | <a href="https://www.buymeacoffee.com/Sleeper85" target="_blank"><img src="https://cdn.buymeacoffee.com/buttons/v2/default-yellow.png" alt="Buy Me A Coffee" style="height: 60px !important;width: 217px !important;" ></a> |
| :--- | --- |
@@ -35,6 +43,18 @@
[Dedicated topic on DIY Solar Forum](https://diysolarforum.com/threads/yambms-jk-bms-can-with-new-cut-off-charging-logic-open-source.79325/)
## Contents
1) [Supported devices](documents/README/Supported_devices.md)
2) [YamBMS behavior](documents/README/YamBMS_behavior.md)
3) [YamBMS functions](documents/README/YamBMS_functions.md)
4) [Charging logic](documents/README/Charging_logic.md)
5) [CAN bus protocol](documents/README/CANBUS_protocol.md)
6) [Schematic and setup instructions](documents/README/Schematic_and_setup_instructions.md)
7) [How to create your YamBMS YAML](documents/README/YamBMS_main_YAML_HowTo.md)
8) [Installation procedure](documents/README/Installation_procedure.md)
9) [Troubleshooting](documents/README/Troubleshooting.md)
## YamBMS
![Image](images/YamBMS_packaged_version.png "YamBMS packaged version")
@@ -73,18 +93,6 @@ The theoretical limit is `256` modbus server (BMS/Shunt) per `RS485 bus` but in
![Image](images/YamBMS_HA_Dashboard.png "YamBMS HA Dashboard")
## Contents
1) [Supported devices](documents/README/Supported_devices.md)
2) [YamBMS behavior](documents/README/YamBMS_behavior.md)
3) [YamBMS functions](documents/README/YamBMS_functions.md)
4) [Charging logic](documents/README/Charging_logic.md)
5) [CAN bus protocol](documents/README/CANBUS_protocol.md)
6) [Schematic and setup instructions](documents/README/Schematic_and_setup_instructions.md)
7) [How to create your YamBMS YAML](documents/README/YamBMS_main_YAML_HowTo.md)
8) [Installation procedure](documents/README/Installation_procedure.md)
9) [Troubleshooting](documents/README/Troubleshooting.md)
## Try YamBMS with the DEMO firmware
You can simply test the application with a `generic ESP32` without compiling and connecting anything on your ESP32.
@@ -92,7 +100,7 @@ The DEMO firmware is composed of `3x BMS` and `1x Shunt` (fake) for a `48V LFP`
> [!IMPORTANT]
> `YamBMS_DEMO_ESP32.factory.bin` is intended for a generic ESP32, does not work with ESP32-S3.
> If you want to test `YamBMS DEMO` with another board you need to compile the firmware with the `multi-bms_DEMO.yaml`.
> If you want to test `YamBMS DEMO` with another board you need to compile the firmware with the `YamBMS_RP_DEMO.yaml`.
1) Download [YamBMS_DEMO_ESP32.factory.bin](firmware/YamBMS_DEMO_ESP32.factory.bin)
2) Follow the [procedure explained in this document](https://docs.google.com/document/d/12pOpaG4Iyw3DjC_kB1q0jjBeSKJHK2FvXI1swebL2RI/edit?usp=sharing).
@@ -105,7 +113,7 @@ rx_pin: 22 # to CAN board CRX (with 4.7K resistor except for SN65HVD230)
## Requirements
* [ESPHome 2024.6.0 or higher](https://github.com/esphome/esphome/releases)
* [ESPHome 2025.5.0 or higher](https://github.com/esphome/esphome/releases)
* ESP32 MCU (buying a board with ≥8MB flash is advised if you intend to monitor multiple BMS)
* CAN transceiver (only with TJA1050/TJA1051 => 4.7K resistor for 5V to 3V3 level shifing)
* BMS JK, JBD, Seplos (other BMS brands already integrated with ESPhome can be added easily)
@@ -113,8 +121,47 @@ rx_pin: 22 # to CAN board CRX (with 4.7K resistor except for SN65HVD230)
* Optional: 48V to 5V DC-DC converter to power the ESP32 from the JK-BMS VBAT pin (URB4805YMD-10WR3 or VRB4805S-6WR3)
* Optional: JK RS485 adaptor and RS485 to TTL 3V3 adaptor (see schematic section)
## Data collection
> [!NOTE]
> For your information, in June 2025 there were `100` YamBMS users.
If the ESP32 has an internet connection, the following data is sent to [this script](http://script.opentel.be/yambms.post.php)
for statistics collection. Only [@Sleeper85](https://github.com/Sleeper85) have access to this information for the production of statistics, the support and the update service.
- ESP32 MAC address
- YamBMS version
- Board chip
- Board name
- BMS model
- BMS count
- CAN bus name
- CAN bus protocol
- Uptime
- Current date and time
## Changelog
* YamBMS 1.5.6 :
* Fixed [issue 58](https://github.com/Sleeper85/esphome-yambms/issues/58) Compilation problem with `esphome 2025.5.0`
* Fixed [issue 55](https://github.com/Sleeper85/esphome-yambms/issues/55) New CPU frequency option
* Fixed [issue 65](https://github.com/Sleeper85/esphome-yambms/issues/65) JBD Circular dependency error
* Fixed [issue 35](https://github.com/Sleeper85/esphome-yambms/issues/35) BMS Charging Cycles Offset
* Merged [PR 51](https://github.com/Sleeper85/esphome-yambms/pull/51) Support for RP2040 RPi Pico
* Merged [PR 56](https://github.com/Sleeper85/esphome-yambms/pull/56) Add support for Basengreen BMS
* Merged [PR 60](https://github.com/Sleeper85/esphome-yambms/pull/60) Fixes for new ESPHome and add of BMS Cycle Count offset
* Merged [PR 61](https://github.com/Sleeper85/esphome-yambms/pull/61) Set Modbus BMS values to 0 when BMS goes offline
* New `board_ESP32-S3_Touch-LCD-4.3.yaml` board
* New `board_ESP32-S3_Touch-LCD-7.yaml` board
* New `board_ESP32-S3_YBoard_DJK.yaml` board
* New `board_RP2040_RPi_Pico.yaml` board
* YamBMS 1.5.5 :
* New `main.yaml` with LP (local packages) and RP (remote packages) versions
* New `board.yaml` with modular UART/CAN interfaces
* The name of the JK `bms.yaml` is no longer linked to a specific model
* SoC calculation is now based on remaining capacity for more accuracy (BMS only) [issues #39](https://github.com/Sleeper85/esphome-yambms/issues/39)
* SoH calculation is moved to BMS level (for those who do not provide this information)
* Improvement of the Victron SmartShunt doc [issues #38](https://github.com/Sleeper85/esphome-yambms/issues/38)
* YamBMS 1.5.4 :
* New low SoC corrected at each BMS level (the corrected SoC is the one transmitted to YamBMS)
* New BMS dashboard
+221
View File
@@ -0,0 +1,221 @@
# Updated : 2025.06.17
# Version : 1.5.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
######################## YamBMS Local Packages Version #########################
# You need to copy the `packages` folder into the same folder as this YAML in order to compile it.
# Don't forget to configure your WiFi credentials in the secrets.yaml
################################################################################
# Don't forget to configure your WiFi credentials in the secrets.yaml
#
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: INFO # VERBOSE / DEBUG / INFO / WARN
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
# web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | Global Settings |
# +--------------------------------------+
substitutions:
# Name
name: '' # Name that can be added as a second prefix after the friendly name, you can leave it blank.
hostname: 'yambms' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS' # Prefix added in front of all entity names and also to classify them.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_id: 'yambms1'
yambms_name: 'YamBMS 1'
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# +--------------------------------------+
# | Shunt Settings |
# +--------------------------------------+
shunt_update_interval: '3s' # frequency at which Shunt data is refreshed
shunt_combine_interval: '1s' # frequency at which Shunt data is combined in YamBMS
# +--------------------------------------+
# | BMS Settings |
# +--------------------------------------+
bms_update_interval: '3s' # frequency at which BMS data is refreshed, going below '3s' can cause problems
bms_combine_interval: '1s' # frequency at which BMS data is combined in YamBMS
bms_cutoff_timer: '50s' # time during which the end of charge conditions must be respected (cut-off + cells not equalizing)
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
packages:
############### >>> UNCOMMENT YOUR BOARD <<< ###############
############### >>> ONLY ONE BOARD ! <<< ###############
# This list is incomplete, other board.yaml are available in the board folder
# device_board: !include 'packages/board/board_ESP32_Generic.yaml'
# device_board: !include 'packages/board/board_ESP32_DevKit-V1.yaml'
# device_board: !include 'packages/board/board_ESP32_Atom-Lite.yaml'
# device_board: !include 'packages/board/board_ESP32_EVB.yaml'
device_board: !include 'packages/board/board_ESP32_LilyGo-T-CAN485.yaml'
# device_board: !include 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
# device_board: !include 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_DevKitC-1_LED-38.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_DevKitC-1_LED-48.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_Touch-LCD-4.3.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_Touch-LCD-7.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_XIAO.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_YBoard.yaml'
# device_board: !include
# file: 'packages/board/board_ESP32-S3_AtomS3.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
# device_board: !include
# file: 'packages/board/board_ESP32-S3_AtomS3R.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
########### >>> UNCOMMENT YOUR BOARD OPTIONS <<< ###########
uart_esp_1: !include packages/board/board_options_itf_uart_esp_1.yaml
# uart_esp_2: !include packages/board/board_options_itf_uart_esp_2.yaml
# uart_esp_3: !include packages/board/board_options_itf_uart_esp_3.yaml
# ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit)
canbus_node_1: !include
file: packages/board/board_options_itf_canbus_esp32_can.yaml
vars:
canbus_node_id: 'canbus_inverter_1'
# MCP2515
# canbus_node_2: !include
# file: packages/board/board_options_itf_canbus_mcp2515.yaml
# vars:
# canbus_node_id: 'canbus_inverter_1'
# captive_portal: !include packages/board/board_options_captive_portal.yaml
############################################################
# Basen controller
controller: !include
file: packages/bms/bms_combine_BASEN_RS485_controller.yaml
vars:
basen_uart_id: 'uart_esp_1'
basen_uart_baud_rate: '9600'
basen_controller_id: "basen_controller_1"
# Basen module 1
bms1: !include
file: packages/bms/bms_combine_BASEN_RS485_full.yaml
vars:
bms_id: '1' # must be a number
bms_name: 'BASEN-BMS 1'
bms_address: '0x01'
# Basen module 2
bms2: !include
file: packages/bms/bms_combine_BASEN_RS485_full.yaml
vars:
bms_id: '2' # must be a number
bms_name: 'BASEN-BMS 2'
bms_address: '0x02'
yambms: !include packages/yambms/yambms.yaml
canbus1: !include
file: packages/yambms/yambms_canbus.yaml
vars:
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_inverter_1'
canbus_light_id: 'esp_light'
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
canbus_link_timer: '5s'
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |
# +--------------------------------------+
device_debug: !include
file: packages/base/device_debug_ESP32.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'
+126 -57
View File
@@ -1,5 +1,5 @@
# Updated : 2025.01.16
# Version : 1.5.3
# Updated : 2025.06.12
# Version : 1.5.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -17,10 +17,14 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
substitutions:
name: yambms-demo
######################## YamBMS Local Packages Version #########################
# Don't forget to configure your WiFi credentials in the secrets.yaml file
# You need to copy the `packages` folder into the same folder as this YAML in order to compile it.
# Don't forget to configure your WiFi credentials in the secrets.yaml
################################################################################
# Don't forget to configure your WiFi credentials in the secrets.yaml
#
# If needed, configure a static IP here
# wifi:
@@ -32,11 +36,11 @@ substitutions:
# dns2: 8.8.4.4
logger:
level: DEBUG # DEBUG / INFO / WARN
level: INFO # VERBOSE / DEBUG / INFO / WARN
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
@@ -47,17 +51,64 @@ api:
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
#web_server:
# port: 80
# log: false
# ota: false
# web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | Global Settings |
# +--------------------------------------+
substitutions:
# Name
name: '' # Name that can be added as a second prefix after the friendly name, you can leave it blank.
hostname: 'yambms' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS Demo' # Prefix added in front of all entity names and also to classify them.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_id: 'yambms1'
yambms_name: 'YamBMS 1'
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# +--------------------------------------+
# | Shunt Settings |
# +--------------------------------------+
shunt_update_interval: '3s' # frequency at which Shunt data is refreshed
shunt_combine_interval: '1s' # frequency at which Shunt data is combined in YamBMS
# +--------------------------------------+
# | BMS Settings |
# +--------------------------------------+
bms_update_interval: '3s' # frequency at which BMS data is refreshed, going below '3s' can cause problems
bms_combine_interval: '1s' # frequency at which BMS data is combined in YamBMS
bms_cutoff_timer: '50s' # time during which the end of charge conditions must be respected (cut-off + cells not equalizing)
# +--------------------------------------+
# | Packages |
@@ -66,29 +117,70 @@ api:
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
packages:
################ >>> CONFIG & CUSTOM LP <<< ################
# Local Packages intended for creating custom codes
# or sharing settings between several main.yaml
# yambms_config: !include yambms_config.yaml
# yambms_custom: !include yambms_custom.yaml
############### >>> UNCOMMENT YOUR BOARD <<< ###############
############### >>> ONLY ONE BOARD ! <<< ###############
# This list is incomplete, other board.yaml are available in the board folder
device_board: !include packages/board/board_ESP32_Generic.yaml
# device_board: !include packages/board/board_ESP32_DevKit-V1.yaml
# device_board: !include packages/board/board_ESP32_LilyGo-T-CAN485.yaml
# device_board: !include packages/board/board_ESP32-C3_ETH01-EVO.yaml
# device_board: !include packages/board/board_ESP32-S3_DevKitC-1.yaml
# device_board: !include packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml
# device_board: !include packages/board/board_ESP32-S3_AtomS3-Lite.yaml
device_board: !include 'packages/board/board_ESP32_Generic.yaml'
# device_board: !include 'packages/board/board_ESP32_DevKit-V1.yaml'
# device_board: !include 'packages/board/board_ESP32_Atom-Lite.yaml'
# device_board: !include 'packages/board/board_ESP32_EVB.yaml'
# device_board: !include 'packages/board/board_ESP32_LilyGo-T-CAN485.yaml'
# device_board: !include 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
# device_board: !include 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_DevKitC-1_LED-38.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_DevKitC-1_LED-48.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_Touch-LCD-4.3.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_Touch-LCD-7.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_XIAO.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_YBoard.yaml'
# device_board: !include
# file: packages/board/board_ESP32-S3_AtomS3.yaml # board_ESP32-S3_AtomS3R.yaml
# file: 'packages/board/board_ESP32-S3_AtomS3.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
# device_board: !include
# file: 'packages/board/board_ESP32-S3_AtomS3R.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
########### >>> UNCOMMENT YOUR BOARD OPTIONS <<< ###########
captive_portal: !include packages/board/board_options_captive_portal.yaml
# uart_esp_1: !include packages/board/board_options_itf_uart_esp_1.yaml
# uart_esp_2: !include packages/board/board_options_itf_uart_esp_2.yaml
# uart_esp_3: !include packages/board/board_options_itf_uart_esp_3.yaml
# ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit)
canbus_node_1: !include
file: packages/board/board_options_itf_canbus_esp32_can.yaml
vars:
canbus_node_id: 'canbus_inverter_1'
# MCP2515
# canbus_node_2: !include
# file: packages/board/board_options_itf_canbus_mcp2515.yaml
# vars:
# canbus_node_id: 'canbus_inverter_1'
############################################################
# Config : this YAML contains the settings shared between all ESP32s
config_yambms: !include packages/config/config_yambms.yaml
config_captive_portal: !include packages/config/config_captive_portal.yaml
shunt1: !include
file: packages/shunt/shunt_combine_FAKE.yaml
vars:
@@ -112,6 +204,7 @@ packages:
bms_current: '9.2' # A
bms_power: '492' # W
bms_soc: '87' # %
bms_soh: '99' # %
bms_min_cell_voltage: '3.339' # V
bms_min_voltage_cell: '2' # cell number 1~16
bms_max_cell_voltage: '3.341' # V
@@ -126,7 +219,7 @@ packages:
bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions
bms_charging_cycles: '178' # charging cycles number Used to calculate the SoH
bms2: !include
file: packages/bms/bms_combine_FAKE.yaml
vars:
@@ -139,6 +232,7 @@ packages:
bms_current: '11.3' # A
bms_power: '604' # W
bms_soc: '85' # %
bms_soh: '89' # %
bms_min_cell_voltage: '3.337' # V
bms_min_voltage_cell: '14' # cell number 1~16
bms_max_cell_voltage: '3.339' # V
@@ -166,6 +260,7 @@ packages:
bms_current: '15.7' # A
bms_power: '838' # W
bms_soc: '83' # %
bms_soh: '79' # %
bms_min_cell_voltage: '3.334' # V
bms_min_voltage_cell: '7' # cell number 1~16
bms_max_cell_voltage: '3.336' # V
@@ -181,40 +276,14 @@ packages:
bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions
bms_charging_cycles: '194' # charging cycles number Used to calculate the SoH
yambms1: !include
file: packages/yambms/yambms.yaml
vars:
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# Maximum charging cycles is used to calculate the battey SOH, LF280K v3 =8000.0, LF280K v2 =6000.0, LF280=3000.0 (decimal is required)
yambms_max_cycles: '6000.0'
yambms: !include packages/yambms/yambms.yaml
canbus1: !include
file: packages/yambms/yambms_canbus.yaml
vars:
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_node1'
canbus_node_id: 'canbus_inverter_1'
canbus_light_id: 'esp_light'
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
+236
View File
@@ -0,0 +1,236 @@
# Updated : 2025.06.12
# Version : 1.5.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
######################## YamBMS Local Packages Version #########################
# You need to copy the `packages` folder into the same folder as this YAML in order to compile it.
# Don't forget to configure your WiFi credentials in the secrets.yaml
################################################################################
# Don't forget to configure your WiFi credentials in the secrets.yaml
#
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: INFO # VERBOSE / DEBUG / INFO / WARN
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
# web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | Global Settings |
# +--------------------------------------+
substitutions:
# Name
name: '' # Name that can be added as a second prefix after the friendly name, you can leave it blank.
hostname: 'yambms' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS' # Prefix added in front of all entity names and also to classify them.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_id: 'yambms1'
yambms_name: 'YamBMS 1'
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# +--------------------------------------+
# | Shunt Settings |
# +--------------------------------------+
shunt_update_interval: '3s' # frequency at which Shunt data is refreshed
shunt_combine_interval: '1s' # frequency at which Shunt data is combined in YamBMS
# +--------------------------------------+
# | BMS Settings |
# +--------------------------------------+
bms_update_interval: '3s' # frequency at which BMS data is refreshed, going below '3s' can cause problems
bms_combine_interval: '1s' # frequency at which BMS data is combined in YamBMS
bms_cutoff_timer: '50s' # time during which the end of charge conditions must be respected (cut-off + cells not equalizing)
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
packages:
############### >>> UNCOMMENT YOUR BOARD <<< ###############
############### >>> ONLY ONE BOARD ! <<< ###############
# This list is incomplete, other board.yaml are available in the board folder
# device_board: !include 'packages/board/board_ESP32_Generic.yaml'
# device_board: !include 'packages/board/board_ESP32_DevKit-V1.yaml'
# device_board: !include 'packages/board/board_ESP32_Atom-Lite.yaml'
# device_board: !include 'packages/board/board_ESP32_EVB.yaml'
device_board: !include 'packages/board/board_ESP32_LilyGo-T-CAN485.yaml'
# device_board: !include 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
# device_board: !include 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_DevKitC-1_LED-38.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_DevKitC-1_LED-48.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_Touch-LCD-4.3.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_Touch-LCD-7.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_XIAO.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_YBoard.yaml'
# device_board: !include
# file: 'packages/board/board_ESP32-S3_AtomS3.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
# device_board: !include
# file: 'packages/board/board_ESP32-S3_AtomS3R.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
########### >>> UNCOMMENT YOUR BOARD OPTIONS <<< ###########
# RS485
uart_esp_1: !include packages/board/board_options_itf_uart_esp_1.yaml
# ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit)
canbus_node_1: !include
file: packages/board/board_options_itf_canbus_esp32_can.yaml
vars:
canbus_node_id: 'canbus_inverter_1'
# MCP2515
canbus_node_2: !include
file: packages/board/board_options_itf_canbus_mcp2515.yaml
vars:
canbus_node_id: 'canbus_bms_1'
# If you do not want to use the default settings, uncomment the options below :
# canbus_can_id: '4'
# canbus_bitrate: '500kbps'
# spi_mosi_pin: '12'
# spi_miso_pin: '5'
# spi_clk_pin: '18'
# mcp2515_cs_pin: '32'
############################################################
# Deye BMS top unit (required)
bms_top: !include
file: packages/bms/bms_sensors_DEYE_CAN_top_full.yaml
vars:
# CAN BUS ID
canbus_id: 'canbus_bms_1'
deye_name: 'DEYE-Top 1'
deye_id: '1'
# Deye module 1
bms1: !include
file: packages/bms/bms_combine_DEYE_CAN_module_full.yaml
vars:
# CAN BUS ID
canbus_id: 'canbus_bms_1'
# BMS vars
bms_id: '1' # must be a number
bms_name: 'DEYE-BMS 1'
deye_id: '1'
deye_module_id: '0' # Modules are numbered with 0-9
# Deye module 2
bms2: !include
file: packages/bms/bms_combine_DEYE_CAN_module_full.yaml
vars:
# CAN BUS ID
canbus_id: 'canbus_bms_1'
# BMS vars
deye_id: '1'
bms_id: '2' # must be a number
bms_name: 'DEYE-BMS 2'
deye_module_id: '1' # Second module
yambms: !include packages/yambms/yambms.yaml
# yambms_custom: !include yambms_custom.yaml
canbus1: !include
file: packages/yambms/yambms_canbus.yaml
vars:
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_inverter_1'
canbus_light_id: 'esp_light'
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
canbus_link_timer: '5s'
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |
# +--------------------------------------+
device_debug: !include
file: packages/base/device_debug_ESP32.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'
+257
View File
@@ -0,0 +1,257 @@
# Updated : 2025.06.16
# Version : 1.5.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
######################## YamBMS Local Packages Version #########################
# You need to copy the `packages` folder into the same folder as this YAML in order to compile it.
# Don't forget to configure your WiFi credentials in the secrets.yaml
################################################################################
# Don't forget to configure your WiFi credentials in the secrets.yaml
#
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: INFO # VERBOSE / DEBUG / INFO / WARN
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
# web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | Global Settings |
# +--------------------------------------+
substitutions:
# Name
name: '' # Name that can be added as a second prefix after the friendly name, you can leave it blank.
hostname: 'yambms' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS' # Prefix added in front of all entity names and also to classify them.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_id: 'yambms1'
yambms_name: 'YamBMS 1'
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# +--------------------------------------+
# | Shunt Settings |
# +--------------------------------------+
shunt_update_interval: '3s' # frequency at which Shunt data is refreshed
shunt_combine_interval: '1s' # frequency at which Shunt data is combined in YamBMS
# +--------------------------------------+
# | BMS Settings |
# +--------------------------------------+
bms_update_interval: '3s' # frequency at which BMS data is refreshed, going below '3s' can cause problems
bms_combine_interval: '1s' # frequency at which BMS data is combined in YamBMS
bms_cutoff_timer: '50s' # time during which the end of charge conditions must be respected (cut-off + cells not equalizing)
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
packages:
################ >>> CONFIG & CUSTOM LP <<< ################
# Local Packages intended for creating custom codes
# or sharing settings between several main.yaml
# yambms_config: !include yambms_config.yaml
# yambms_custom: !include yambms_custom.yaml
############### >>> UNCOMMENT YOUR BOARD <<< ###############
############### >>> ONLY ONE BOARD ! <<< ###############
# This list is incomplete, other board.yaml are available in the board folder
device_board: !include 'packages/board/board_ESP32_Generic.yaml'
# device_board: !include 'packages/board/board_ESP32_DevKit-V1.yaml'
# device_board: !include 'packages/board/board_ESP32_Atom-Lite.yaml'
# device_board: !include 'packages/board/board_ESP32_EVB.yaml'
# device_board: !include 'packages/board/board_ESP32_LilyGo-T-CAN485.yaml'
# device_board: !include 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
# device_board: !include 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_DevKitC-1_LED-38.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_DevKitC-1_LED-48.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_Touch-LCD-4.3.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_Touch-LCD-7.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_XIAO.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_YBoard.yaml'
# device_board: !include
# file: 'packages/board/board_ESP32-S3_AtomS3.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
# device_board: !include
# file: 'packages/board/board_ESP32-S3_AtomS3R.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
########### >>> UNCOMMENT YOUR BOARD OPTIONS <<< ###########
uart_esp_1: !include packages/board/board_options_itf_uart_esp_1.yaml
# uart_esp_2: !include packages/board/board_options_itf_uart_esp_2.yaml
# uart_esp_3: !include packages/board/board_options_itf_uart_esp_3.yaml
# ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit)
canbus_node_1: !include
file: packages/board/board_options_itf_canbus_esp32_can.yaml
vars:
canbus_node_id: 'canbus_inverter_1'
# MCP2515
# canbus_node_2: !include
# file: packages/board/board_options_itf_canbus_mcp2515.yaml
# vars:
# canbus_node_id: 'canbus_inverter_1'
############################################################
# You don't have to import a shunt but you must import at least one BMS.
# shunt1: !include
# file: packages/shunt/shunt_combine_Victron_SmartShunt_UART.yaml # shunt_combine_Junctek_KHF_UART.yaml
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_uart_id: 'uart_esp_3'
# shunt1: !include
# file: packages/shunt/shunt_combine_Victron_SmartShunt_BLE.yaml
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_mac_address: '60:A4:23:91:8F:55' # Your MAC address
# shunt_encryption_key: '0df4d0395b7d1a876c0c33ecb9e70dcd' # Your encryption key
bms1: !include
file: packages/bms/bms_combine_JBD_UART_full.yaml
vars:
bms_id: '1' # must be a number
bms_name: 'BMS 1'
bms_uart_id: 'uart_esp_1'
bms_rx_timeout: '150ms'
# Required settings cannot be retrieved from BMS
# These values ​​must match your BMS settings
# LFP values example
bms_max_charge_current: '100' # A. Used to calculate maximum charge current
bms_max_discharge_current: '100' # A. Used to calculate maximum discharge current
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
bms2: !include
file: packages/bms/bms_combine_JBD_BLE_full.yaml
vars:
bms_id: '2' # must be a number
bms_name: 'BMS 2'
bms_ble_mac_address: 'C8:47:8C:10:7E:AA' # Your MAC address
# Required settings cannot be retrieved from BMS
# These values ​​must match your BMS settings
# LFP values example
bms_max_charge_current: '100' # A. Used to calculate maximum charge current
bms_max_discharge_current: '100' # A. Used to calculate maximum discharge current
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
yambms: !include packages/yambms/yambms.yaml
canbus1: !include
file: packages/yambms/yambms_canbus.yaml
vars:
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_inverter_1'
canbus_light_id: 'esp_light'
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
canbus_link_timer: '5s'
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |
# +--------------------------------------+
device_debug: !include
file: packages/base/device_debug_ESP32.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'
+319
View File
@@ -0,0 +1,319 @@
# Updated : 2025.06.12
# Version : 1.5.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
######################## YamBMS Local Packages Version #########################
# You need to copy the `packages` folder into the same folder as this YAML in order to compile it.
# Don't forget to configure your WiFi credentials in the secrets.yaml
################################################################################
# Don't forget to configure your WiFi credentials in the secrets.yaml
#
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: INFO # VERBOSE / DEBUG / INFO / WARN
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
# web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | Global Settings |
# +--------------------------------------+
substitutions:
# Name
name: '' # Name that can be added as a second prefix after the friendly name, you can leave it blank.
hostname: 'yambms' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS' # Prefix added in front of all entity names and also to classify them.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_id: 'yambms1'
yambms_name: 'YamBMS 1'
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# +--------------------------------------+
# | Shunt Settings |
# +--------------------------------------+
shunt_update_interval: '3s' # frequency at which Shunt data is refreshed
shunt_combine_interval: '1s' # frequency at which Shunt data is combined in YamBMS
# +--------------------------------------+
# | BMS Settings |
# +--------------------------------------+
bms_update_interval: '3s' # frequency at which BMS data is refreshed, going below '3s' can cause problems
bms_combine_interval: '1s' # frequency at which BMS data is combined in YamBMS
bms_cutoff_timer: '50s' # time during which the end of charge conditions must be respected (cut-off + cells not equalizing)
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
packages:
################ >>> CONFIG & CUSTOM LP <<< ################
# Local Packages intended for creating custom codes
# or sharing settings between several main.yaml
# yambms_config: !include yambms_config.yaml
# yambms_custom: !include yambms_custom.yaml
############### >>> UNCOMMENT YOUR BOARD <<< ###############
############### >>> ONLY ONE BOARD ! <<< ###############
# This list is incomplete, other board.yaml are available in the board folder
# device_board: !include 'packages/board/board_ESP32_Generic.yaml'
# device_board: !include 'packages/board/board_ESP32_DevKit-V1.yaml'
# device_board: !include 'packages/board/board_ESP32_Atom-Lite.yaml'
# device_board: !include 'packages/board/board_ESP32_EVB.yaml'
# device_board: !include 'packages/board/board_ESP32_LilyGo-T-CAN485.yaml'
# device_board: !include 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
# device_board: !include 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_DevKitC-1_LED-38.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_DevKitC-1_LED-48.yaml'
device_board: !include 'packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_Touch-LCD-4.3.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_Touch-LCD-7.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_XIAO.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_YBoard.yaml'
# device_board: !include
# file: 'packages/board/board_ESP32-S3_AtomS3.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
# device_board: !include
# file: 'packages/board/board_ESP32-S3_AtomS3R.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
########### >>> UNCOMMENT YOUR BOARD OPTIONS <<< ###########
uart_esp_1: !include packages/board/board_options_itf_uart_esp_1.yaml
# uart_esp_2: !include packages/board/board_options_itf_uart_esp_2.yaml
# uart_esp_3: !include packages/board/board_options_itf_uart_esp_3.yaml
# ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit)
canbus_node_1: !include
file: packages/board/board_options_itf_canbus_esp32_can.yaml
vars:
canbus_node_id: 'canbus_inverter_1'
# MCP2515
# canbus_node_2: !include
# file: packages/board/board_options_itf_canbus_mcp2515.yaml
# vars:
# canbus_node_id: 'canbus_inverter_1'
############################################################
# You don't have to import a shunt but you must import at least one BMS.
# shunt1: !include
# file: packages/shunt/shunt_combine_Victron_SmartShunt_UART.yaml # shunt_combine_Junctek_KHF_UART.yaml
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_uart_id: 'uart_esp_3'
# shunt1: !include
# file: packages/shunt/shunt_combine_Victron_SmartShunt_BLE.yaml
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_mac_address: '60:A4:23:91:8F:55' # Your MAC address
# shunt_encryption_key: '0df4d0395b7d1a876c0c33ecb9e70dcd' # Your encryption key
# The sniffer represents the ESP node connected to the JK-BMS PB RS485 bus
# If address 0x00 is not detected on the RS485 bus, the sniffer will act directly as a master BMS (mode 2, max 15 BMS)
# sniffer1: !include
# file: packages/bms/bms_combine_JK_RS485_Modbus_sniffer_talk_pin.yaml
# vars:
# sniffer_id: 'sniffer1'
# sniffer_protocol: 'JK02_32S'
# sniffer_uart_id: 'uart_esp_1'
# sniffer_talk_pin: 8 # ESP32: 4, ESP32-S3: 8, ESP32-C3: 10
sniffer1: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_sniffer.yaml
vars:
sniffer_id: 'sniffer1'
sniffer_protocol: 'JK02_32S'
sniffer_uart_id: 'uart_esp_1'
# Mode2 : configure the DIP switches of your BMS from 0x01 to 0x0F (don't use the 0x00 address, maximum 15 BMS)
bms1: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '1' # must be a number
bms_name: 'JK-BMS 1'
bms_address: '0x01' # BMS 1 DIP switch
bms2: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '2' # must be a number
bms_name: 'JK-BMS 2'
bms_address: '0x02' # BMS 2 DIP switch
bms3: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '3' # must be a number
bms_name: 'JK-BMS 3'
bms_address: '0x03' # BMS 3 DIP switch
bms4: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '4' # must be a number
bms_name: 'JK-BMS 4'
bms_address: '0x04' # BMS 4 DIP switch
bms5: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '5' # must be a number
bms_name: 'JK-BMS 5'
bms_address: '0x05' # BMS 5 DIP switch
bms6: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '6' # must be a number
bms_name: 'JK-BMS 6'
bms_address: '0x06' # BMS 6 DIP switch
bms7: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '7' # must be a number
bms_name: 'JK-BMS 7'
bms_address: '0x07' # BMS 7 DIP switch
bms8: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '8' # must be a number
bms_name: 'JK-BMS 8'
bms_address: '0x08' # BMS 8 DIP switch
yambms: !include packages/yambms/yambms.yaml
canbus1: !include
file: packages/yambms/yambms_canbus.yaml
vars:
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_inverter_1'
canbus_light_id: 'esp_light'
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
canbus_link_timer: '5s'
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |
# +--------------------------------------+
device_debug: !include
file: packages/base/device_debug_ESP32.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'
+208
View File
@@ -0,0 +1,208 @@
# Updated : 2025.06.12
# Version : 1.5.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
######################## YamBMS Local Packages Version #########################
# You need to copy the `packages` folder into the same folder as this YAML in order to compile it.
# Don't forget to configure your WiFi credentials in the secrets.yaml
################################################################################
# Don't forget to configure your WiFi credentials in the secrets.yaml
#
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: INFO # VERBOSE / DEBUG / INFO / WARN
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
# web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | Global Settings |
# +--------------------------------------+
substitutions:
# Name
name: '' # Name that can be added as a second prefix after the friendly name, you can leave it blank.
hostname: 'pvbrain2' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS' # Prefix added in front of all entity names and also to classify them.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_id: 'yambms1'
yambms_name: 'YamBMS 1'
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# +--------------------------------------+
# | Shunt Settings |
# +--------------------------------------+
shunt_update_interval: '3s' # frequency at which Shunt data is refreshed
shunt_combine_interval: '1s' # frequency at which Shunt data is combined in YamBMS
# +--------------------------------------+
# | BMS Settings |
# +--------------------------------------+
bms_update_interval: '3s' # frequency at which BMS data is refreshed, going below '3s' can cause problems
bms_combine_interval: '1s' # frequency at which BMS data is combined in YamBMS
bms_cutoff_timer: '50s' # time during which the end of charge conditions must be respected (cut-off + cells not equalizing)
# +--------------------------------------+
# | WK2168 UART expander |
# +--------------------------------------+
uart0_baudrate: '2400' #WKS {RJ45-UART0}
uart1_baudrate: '38400' #JSY193
uart2_baudrate: '19200' #SmartShunt
uart3_baudrate: '9600' #SRNE {RJ45-UART3}
uart4_baudrate: '115200' #JK-BMS 1
uart5_baudrate: '115200' #JK-BMS 2
uart6_baudrate: '115200' #Pylontech
uart7_baudrate: '9600' #EPEVER {RJ45-UART7}
# +--------------------------------------+
# | PVbrain2 packages |
# +--------------------------------------+
packages:
device_board: !include packages/board/board_ESP32-S3_DevKitC-1_PVbrain2.yaml
# BUS
# bus_i2c0: !include pvbrain2/base/device_bus_i2c0.yaml # SX1509 and BME280/BMP280
bus_spi1: !include pvbrain2/base/device_bus_spi1.yaml # MCP2515
# bus_one_wire: !include pvbrain2/base/device_bus_one_wire.yaml # Dallas
# Devices
# device_uart_esp: !include pvbrain2/base/device_uart_esp.yaml
device_wk2168_spi: !include pvbrain2/base/device_wk2168_spi.yaml
# device_wk2168_i2c: !include pvbrain2/base/device_wk2168_i2c.yaml
# device_sx1509: !include pvbrain2/base/device_sx1509.yaml
device_canbus_node1: !include pvbrain2/base/device_canbus_esp32can.yaml # canbus_node1
device_canbus_node2: !include pvbrain2/base/device_canbus_mcp2515.yaml # canbus_node2
# +--------------------------------------+
# | YamBMS packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
################ >>> CONFIG & CUSTOM LP <<< ################
# Local Packages intended for creating custom codes
# or sharing settings between several main.yaml
# yambms_config: !include yambms_config.yaml
# yambms_custom: !include yambms_custom.yaml
# You don't have to import a shunt but you must import at least one BMS.
# shunt1: !include
# file: packages/shunt/shunt_combine_Victron_SmartShunt_UART_expander.yaml # shunt_combine_Junctek_KHF_UART.yaml
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_uart_id: 'uart_${uart_hub_bus}_2'
bms1: !include
file: packages/bms/bms_combine_JK_UART_4G-GPS_full.yaml
vars:
bms_id: '1' # must be a number
bms_name: 'JK-BMS 1'
bms_uart_id: 'uart_${uart_hub_bus}_4'
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
bms2: !include
file: packages/bms/bms_combine_JK_UART_4G-GPS_full.yaml
vars:
bms_id: '2' # must be a number
bms_name: 'JK-BMS 2'
bms_uart_id: 'uart_${uart_hub_bus}_5'
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
yambms: !include packages/yambms/yambms.yaml
canbus1: !include
file: packages/yambms/yambms_canbus.yaml
vars:
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_node1'
canbus_light_id: 'esp_light'
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
canbus_link_timer: '5s'
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |
# +--------------------------------------+
device_debug: !include
file: packages/base/device_debug_ESP32.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'
+116
View File
@@ -0,0 +1,116 @@
# Updated : 2025.06.19
# Version : 1.5.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
######################## YamBMS Local Packages Version #########################
# You need to copy the `packages` folder into the same folder as this YAML in order to compile it.
# Don't forget to configure your WiFi credentials in the secrets.yaml
################################################################################
logger:
level: INFO # VERBOSE / DEBUG / INFO / WARN
# +--------------------------------------+
# | Global Settings |
# +--------------------------------------+
substitutions:
# Name
name: '' # Name that can be added as a second prefix after the friendly name, you can leave it blank.
hostname: 'yambms' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS' # Prefix added in front of all entity names and also to classify them.
# +--------------------------------------+
# | Shunt Settings |
# +--------------------------------------+
shunt_update_interval: '5s' # frequency at which Shunt data is refreshed
shunt_combine_interval: '1s' # frequency at which Shunt data is combined in YamBMS
# +--------------------------------------+
# | Modbus Settings |
# +--------------------------------------+
modbus_update_interval: '5s' # frequency with which BMS/Shunt modbus servers are queried
modbus_baud_rate: '19200' # 9600 / 19200 / 11520
modbus_command_throttle: '0ms' # minimum time in between 2 requests to the device
modbus_send_wait_time: '250ms' # time in milliseconds before the next ModBUS command is sent if an answer from a previous command is pending
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
packages:
################ >>> CONFIG & CUSTOM LP <<< ################
# Local Packages intended for creating custom codes
# or sharing settings between several main.yaml
# yambms_config: !include yambms_config.yaml
# yambms_custom: !include yambms_custom.yaml
############################################################
device_board: !include packages/board/board_RP2040_RPi_Pico.yaml
uart_1: !include packages/board/board_options_itf_uart_1.yaml
uart_2: !include packages/board/board_options_itf_uart_2.yaml
uart_3: !include packages/board/board_options_itf_uart_3.yaml
uart_4: !include packages/board/board_options_itf_uart_4.yaml
uart_5: !include packages/board/board_options_itf_uart_5.yaml
uart_6: !include packages/board/board_options_itf_uart_6.yaml
modbus: !include
file: packages/base/device_modbus.yaml
vars:
modbus_role: 'server' # client / server
modbus_uart_id: 'uart_1' # RS485 board
shunt1: !include
file: packages/shunt/shunt_modbus_Victron_SmartShunt_UART_minimal.yaml
vars:
shunt_id: '1'
shunt_name: 'Shunt 1'
shunt_uart_id: 'uart_2'
shunt2: !include
file: packages/shunt/shunt_modbus_Victron_SmartShunt_UART_minimal.yaml
vars:
shunt_id: '2'
shunt_name: 'Shunt 2'
shunt_uart_id: 'uart_3'
shunt3: !include
file: packages/shunt/shunt_modbus_Victron_SmartShunt_UART_minimal.yaml
vars:
shunt_id: '3'
shunt_name: 'Shunt 3'
shunt_uart_id: 'uart_4'
shunt4: !include
file: packages/shunt/shunt_modbus_Victron_SmartShunt_UART_minimal.yaml
vars:
shunt_id: '4'
shunt_name: 'Shunt 4'
shunt_uart_id: 'uart_5'
shunt5: !include
file: packages/shunt/shunt_modbus_Victron_SmartShunt_UART_minimal.yaml
vars:
shunt_id: '5'
shunt_name: 'Shunt 5'
shunt_uart_id: 'uart_6'
+205
View File
@@ -0,0 +1,205 @@
# Updated : 2025.06.12
# Version : 1.5.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
######################## YamBMS Local Packages Version #########################
# You need to copy the `packages` folder into the same folder as this YAML in order to compile it.
# Don't forget to configure your WiFi credentials in the secrets.yaml
################################################################################
# Don't forget to configure your WiFi credentials in the secrets.yaml
#
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: INFO # VERBOSE / DEBUG / INFO / WARN
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
#web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | Global Settings |
# +--------------------------------------+
substitutions:
# ESP32 name / hostname
name: ''
hostname: 'yambms' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS'
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_id: 'yambms1'
yambms_name: 'YamBMS 1'
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '60'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '300'
# +--------------------------------------+
# | Shunt Settings |
# +--------------------------------------+
shunt_update_interval: '3s' # frequency at which Shunt data is refreshed
shunt_combine_interval: '1s' # frequency at which Shunt data is combined in YamBMS
# +--------------------------------------+
# | BMS Settings |
# +--------------------------------------+
bms_update_interval: '3s' # frequency at which BMS data is refreshed, going below '3s' can cause problems
bms_combine_interval: '1s' # frequency at which BMS data is combined in YamBMS
bms_cutoff_timer: '50s' # time during which the end of charge conditions must be respected (cut-off + cells not equalizing)
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
packages:
################ >>> CONFIG & CUSTOM LP <<< ################
# Local Packages intended for creating custom codes
# or sharing settings between several main.yaml
# yambms_config: !include yambms_config.yaml
# yambms_custom: !include yambms_custom.yaml
############### >>> UNCOMMENT YOUR BOARD <<< ###############
############### >>> ONLY ONE BOARD ! <<< ###############
device_board: !include packages/board/board_ESP32-S3_YBoard.yaml
########### >>> UNCOMMENT YOUR BOARD OPTIONS <<< ###########
uart_esp_1: !include packages/board/board_options_itf_uart_esp_1.yaml
# ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit)
canbus_node_1: !include
file: packages/board/board_options_itf_canbus_esp32_can.yaml
vars:
canbus_node_id: 'canbus_inverter_1'
############################################################
# You don't have to import a shunt but you must import at least one BMS.
shunt1: !include
file: packages/shunt/shunt_combine_Victron_SmartShunt_BLE.yaml
vars:
shunt_id: '1' # must be a number
shunt_name: 'Shunt'
shunt_mac_address: 'c0960b5d8cba'
shunt_encryption_key: '1e196f635d4e5b0777afa79b47904937'
sniffer1: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_sniffer.yaml
vars:
sniffer_id: 'sniffer1'
sniffer_protocol: 'JK02_32S'
sniffer_uart_id: 'uart_esp_1'
# Mode2 : configure the DIP switches of your BMS from 0x01 to 0x0F (don't use the 0x00 address, maximum 15 BMS)
bms1: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '1' # must be a number
bms_name: 'JK-BMS 1'
bms_address: '0x01' # BMS 1 DIP switch
bms2: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '2' # must be a number
bms_name: 'JK-BMS 2'
bms_address: '0x02' # BMS 2 DIP switch
yambms: !include packages/yambms/yambms.yaml
canbus1: !include
file: packages/yambms/yambms_canbus.yaml
vars:
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_inverter_1'
canbus_light_id: 'esp_light'
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
canbus_link_timer: '5s'
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |
# +--------------------------------------+
device_debug: !include
file: packages/base/device_debug_ESP32.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'
+240
View File
@@ -0,0 +1,240 @@
# Updated : 2025.06.12
# Version : 1.5.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
######################## YamBMS Local Packages Version #########################
# You need to copy the `packages` folder into the same folder as this YAML in order to compile it.
# Don't forget to configure your WiFi credentials in the secrets.yaml
################################################################################
# Don't forget to configure your WiFi credentials in the secrets.yaml
#
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: INFO # VERBOSE / DEBUG / INFO / WARN
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
# web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | Global Settings |
# +--------------------------------------+
substitutions:
# Name
name: '' # Name that can be added as a second prefix after the friendly name, you can leave it blank.
hostname: 'yambms' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS' # Prefix added in front of all entity names and also to classify them.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_id: 'yambms1'
yambms_name: 'YamBMS 1'
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# +--------------------------------------+
# | Shunt Settings |
# +--------------------------------------+
shunt_update_interval: '3s' # frequency at which Shunt data is refreshed
shunt_combine_interval: '1s' # frequency at which Shunt data is combined in YamBMS
# +--------------------------------------+
# | BMS Settings |
# +--------------------------------------+
bms_update_interval: '3s' # frequency at which BMS data is refreshed, going below '3s' can cause problems
bms_combine_interval: '1s' # frequency at which BMS data is combined in YamBMS
bms_cutoff_timer: '50s' # time during which the end of charge conditions must be respected (cut-off + cells not equalizing)
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
packages:
################ >>> CONFIG & CUSTOM LP <<< ################
# Local Packages intended for creating custom codes
# or sharing settings between several main.yaml
# yambms_config: !include yambms_config.yaml
# yambms_custom: !include yambms_custom.yaml
############### >>> UNCOMMENT YOUR BOARD <<< ###############
############### >>> ONLY ONE BOARD ! <<< ###############
# This list is incomplete, other board.yaml are available in the board folder
device_board: !include 'packages/board/board_ESP32_Generic.yaml'
# device_board: !include 'packages/board/board_ESP32_DevKit-V1.yaml'
# device_board: !include 'packages/board/board_ESP32_Atom-Lite.yaml'
# device_board: !include 'packages/board/board_ESP32_EVB.yaml'
# device_board: !include 'packages/board/board_ESP32_LilyGo-T-CAN485.yaml'
# device_board: !include 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
# device_board: !include 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_DevKitC-1_LED-38.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_DevKitC-1_LED-48.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_Touch-LCD-4.3.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_Touch-LCD-7.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_XIAO.yaml'
# device_board: !include 'packages/board/board_ESP32-S3_YBoard.yaml'
# device_board: !include
# file: 'packages/board/board_ESP32-S3_AtomS3.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
# device_board: !include
# file: 'packages/board/board_ESP32-S3_AtomS3R.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
########### >>> UNCOMMENT YOUR BOARD OPTIONS <<< ###########
uart_esp_1: !include packages/board/board_options_itf_uart_esp_1.yaml
uart_esp_2: !include packages/board/board_options_itf_uart_esp_2.yaml
uart_esp_3: !include packages/board/board_options_itf_uart_esp_3.yaml
# ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit)
canbus_node_1: !include
file: packages/board/board_options_itf_canbus_esp32_can.yaml
vars:
canbus_node_id: 'canbus_inverter_1'
# MCP2515
# canbus_node_2: !include
# file: packages/board/board_options_itf_canbus_mcp2515.yaml
# vars:
# canbus_node_id: 'canbus_inverter_1'
############################################################
# You don't have to import a shunt but you must import at least one BMS.
# shunt1: !include
# file: packages/shunt/shunt_combine_Victron_SmartShunt_UART.yaml # shunt_combine_Junctek_KHF_UART.yaml
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_uart_id: 'uart_esp_3'
# shunt1: !include
# file: packages/shunt/shunt_combine_Victron_SmartShunt_BLE.yaml
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_mac_address: '60:A4:23:91:8F:55' # Your MAC address
# shunt_encryption_key: '0df4d0395b7d1a876c0c33ecb9e70dcd' # Your encryption key
bms1: !include
file: packages/bms/bms_combine_JK_UART_4G-GPS_full.yaml
vars:
bms_id: '1' # must be a number
bms_name: 'JK-BMS 1'
bms_uart_id: 'uart_esp_1'
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
bms2: !include
file: packages/bms/bms_combine_JK_UART_4G-GPS_full.yaml
vars:
bms_id: '2' # must be a number
bms_name: 'JK-BMS 2'
bms_uart_id: 'uart_esp_2'
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
yambms: !include packages/yambms/yambms.yaml
canbus1: !include
file: packages/yambms/yambms_canbus.yaml
vars:
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_inverter_1'
canbus_light_id: 'esp_light'
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
canbus_link_timer: '5s'
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |
# +--------------------------------------+
device_debug: !include
file: packages/base/device_debug_ESP32.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'
+286
View File
@@ -0,0 +1,286 @@
# Updated : 2025.06.17
# Version : 1.5.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
######################## YamBMS Remote Packages Version ########################
# You can compile this YAML directly without the `packages` folder.
# The packages will be automatically downloaded from GitHub.
# Don't forget to configure your WiFi credentials in the secrets.yaml
################################################################################
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: INFO # VERBOSE / DEBUG / INFO / WARN
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
# web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | Global Settings |
# +--------------------------------------+
substitutions:
# Name
name: '' # Name that can be added as a second prefix after the friendly name, you can leave it blank.
hostname: 'yambms' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS' # Prefix added in front of all entity names and also to classify them.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_id: 'yambms1'
yambms_name: 'YamBMS 1'
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# +--------------------------------------+
# | Shunt Settings |
# +--------------------------------------+
shunt_update_interval: '3s' # frequency at which Shunt data is refreshed
shunt_combine_interval: '1s' # frequency at which Shunt data is combined in YamBMS
# +--------------------------------------+
# | BMS Settings |
# +--------------------------------------+
bms_update_interval: '3s' # frequency at which BMS data is refreshed, going below '3s' can cause problems
bms_combine_interval: '1s' # frequency at which BMS data is combined in YamBMS
bms_cutoff_timer: '50s' # time during which the end of charge conditions must be respected (cut-off + cells not equalizing)
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
packages:
################ >>> CONFIG & CUSTOM LP <<< ################
# Local Packages intended for creating custom codes
# or sharing settings between several main.yaml
# yambms_config: !include yambms_config.yaml
# yambms_custom: !include yambms_custom.yaml
############### >>> UNCOMMENT YOUR BOARD <<< ###############
############### >>> ONLY ONE BOARD ! <<< ###############
board:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
# - path: 'packages/board/board_ESP32_Generic.yaml'
# - path: 'packages/board/board_ESP32_DevKit-V1.yaml'
# - path: 'packages/board/board_ESP32_Atom-Lite.yaml'
# - path: 'packages/board/board_ESP32_EVB.yaml'
- path: 'packages/board/board_ESP32_LilyGo-T-CAN485.yaml'
# - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
# - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
# - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
# - path: 'packages/board/board_ESP32-S3_DevKitC-1_LED-38.yaml'
# - path: 'packages/board/board_ESP32-S3_DevKitC-1_LED-48.yaml'
# - path: 'packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml'
# - path: 'packages/board/board_ESP32-S3_Touch-LCD-4.3.yaml'
# - path: 'packages/board/board_ESP32-S3_Touch-LCD-7.yaml'
# - path: 'packages/board/board_ESP32-S3_XIAO.yaml'
# - path: 'packages/board/board_ESP32-S3_YBoard.yaml'
# - path: 'packages/board/board_ESP32-S3_AtomS3.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
# - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
# LilyGo T-Connect Pro
# Importing the display also activates PSRAM.
# Also note that the display update takes about 120 ms, as indicated in the logs:
# "Component display took a long time for an operation (124 ms)."
# Board
# - path: 'packages/board/board_ESP32-S3_LilyGo-T-Connect-Pro.yaml'
# Display
# - path: 'packages/board/board_options_display_480x222.yaml'
# vars:
# display_auto_next_page_interval: '5s'
########### >>> UNCOMMENT YOUR BOARD OPTIONS <<< ###########
board_options:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
# UART 1
- path: 'packages/board/board_options_itf_uart_esp_1.yaml'
# UART 2
# - path: 'packages/board/board_options_itf_uart_esp_2.yaml'
# UART 3
# - path: 'packages/board/board_options_itf_uart_esp_3.yaml'
# ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit)
- path: 'packages/board/board_options_itf_canbus_esp32_can.yaml'
vars:
canbus_node_id: 'canbus_inverter_1'
# MCP2515
# - path: 'packages/board/board_options_itf_canbus_mcp2515.yaml'
# vars:
# canbus_node_id: 'canbus_inverter_1'
############################################################
# You don't have to import a shunt but you must import at least one BMS.
# UART Shunt
# shunt:
# url: https://github.com/Sleeper85/esphome-yambms
# ref: main
# refresh: 0s
# files:
# # Shunt 1
# - path: 'packages/shunt/shunt_combine_Victron_SmartShunt_UART.yaml' # shunt_combine_Junctek_KHF_UART.yaml
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_uart_id: 'uart_esp_3'
# BLE Shunt
# shunt:
# url: https://github.com/Sleeper85/esphome-yambms
# ref: main
# refresh: 0s
# files:
# # Shunt 1
# - path: 'packages/shunt/shunt_combine_Victron_SmartShunt_BLE.yaml'
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_mac_address: '60:A4:23:91:8F:55' # Your MAC address
# shunt_encryption_key: '0df4d0395b7d1a876c0c33ecb9e70dcd' # Your encryption key
bms:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
# Basen controller
- path: packages/bms/bms_combine_BASEN_RS485_controller.yaml
vars:
basen_uart_id: 'uart_esp_1'
basen_uart_baud_rate: '9600'
basen_controller_id: "basen_controller_1"
# Basen module 1
- path: packages/bms/bms_combine_BASEN_RS485_full.yaml
vars:
bms_id: '1' # must be a number
bms_name: 'BASEN-BMS 1'
bms_address: '0x01'
# Basen module 2
- path: packages/bms/bms_combine_BASEN_RS485_full.yaml
vars:
bms_id: '2' # must be a number
bms_name: 'BASEN-BMS 2'
bms_address: '0x02'
yambms:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: 'packages/yambms/yambms.yaml'
canbus:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: 'packages/yambms/yambms_canbus.yaml'
vars:
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_inverter_1'
canbus_light_id: 'esp_light'
# The CANBUS link will be considered down if no response from the inverter (0x305 frame) for 5s
# The Deye inverter sends the ACK 0x305 only when it receives the 0x356 frame.
canbus_link_timer: '5s'
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |
# +--------------------------------------+
debug:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: packages/base/device_debug_ESP32.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'
+338
View File
@@ -0,0 +1,338 @@
# Updated : 2025.06.14
# Version : 1.5.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
######################## YamBMS Remote Packages Version ########################
# You can compile this YAML directly without the `packages` folder.
# The packages will be automatically downloaded from GitHub.
# Don't forget to configure your WiFi credentials in the secrets.yaml
################################################################################
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: INFO # VERBOSE / DEBUG / INFO / WARN
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
# web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | Global Settings |
# +--------------------------------------+
substitutions:
# Name
name: '' # Name that can be added as a second prefix after the friendly name, you can leave it blank.
hostname: 'yambms' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS Demo' # Prefix added in front of all entity names and also to classify them.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_id: 'yambms1'
yambms_name: 'YamBMS 1'
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# +--------------------------------------+
# | Shunt Settings |
# +--------------------------------------+
shunt_update_interval: '3s' # frequency at which Shunt data is refreshed
shunt_combine_interval: '1s' # frequency at which Shunt data is combined in YamBMS
# +--------------------------------------+
# | BMS Settings |
# +--------------------------------------+
bms_update_interval: '3s' # frequency at which BMS data is refreshed, going below '3s' can cause problems
bms_combine_interval: '1s' # frequency at which BMS data is combined in YamBMS
bms_cutoff_timer: '50s' # time during which the end of charge conditions must be respected (cut-off + cells not equalizing)
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
packages:
################ >>> CONFIG & CUSTOM LP <<< ################
# Local Packages intended for creating custom codes
# or sharing settings between several main.yaml
# yambms_config: !include yambms_config.yaml
# yambms_custom: !include yambms_custom.yaml
############### >>> UNCOMMENT YOUR BOARD <<< ###############
############### >>> ONLY ONE BOARD ! <<< ###############
board:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: 'packages/board/board_ESP32_Generic.yaml'
# - path: 'packages/board/board_ESP32_DevKit-V1.yaml'
# - path: 'packages/board/board_ESP32_Atom-Lite.yaml'
# - path: 'packages/board/board_ESP32_EVB.yaml'
# - path: 'packages/board/board_ESP32_LilyGo-T-CAN485.yaml'
# - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
# - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
# - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
# - path: 'packages/board/board_ESP32-S3_DevKitC-1_LED-38.yaml'
# - path: 'packages/board/board_ESP32-S3_DevKitC-1_LED-48.yaml'
# - path: 'packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml'
# - path: 'packages/board/board_ESP32-S3_Touch-LCD-4.3.yaml'
# - path: 'packages/board/board_ESP32-S3_Touch-LCD-7.yaml'
# - path: 'packages/board/board_ESP32-S3_XIAO.yaml'
# - path: 'packages/board/board_ESP32-S3_YBoard.yaml'
# - path: 'packages/board/board_ESP32-S3_AtomS3.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
# - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
# LilyGo T-Connect Pro
# Importing the display also activates PSRAM.
# Also note that the display update takes about 120 ms, as indicated in the logs:
# "Component display took a long time for an operation (124 ms)."
# Board
# - path: 'packages/board/board_ESP32-S3_LilyGo-T-Connect-Pro.yaml'
# Display
# - path: 'packages/board/board_options_display_480x222.yaml'
# vars:
# display_auto_next_page_interval: '5s'
########### >>> UNCOMMENT YOUR BOARD OPTIONS <<< ###########
board_options:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
# Captive Portal
- path: 'packages/board/board_options_captive_portal.yaml'
# UART 1
# - path: 'packages/board/board_options_itf_uart_esp_1.yaml'
# UART 2
# - path: 'packages/board/board_options_itf_uart_esp_2.yaml'
# UART 3
# - path: 'packages/board/board_options_itf_uart_esp_3.yaml'
# ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit)
- path: 'packages/board/board_options_itf_canbus_esp32_can.yaml'
vars:
canbus_node_id: 'canbus_inverter_1'
# MCP2515
# - path: 'packages/board/board_options_itf_canbus_mcp2515.yaml'
# vars:
# canbus_node_id: 'canbus_inverter_1'
############################################################
shunt:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
# Shunt 1
- path: 'packages/shunt/shunt_combine_FAKE.yaml'
vars:
shunt_id: '1' # must be a number
shunt_name: 'Shunt 1'
# Shunt sensors values
shunt_voltage: '53.41' # V
shunt_current: '37.5' # A
shunt_power: '2003' # W
shunt_soc: '86' # %
bms:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
# BMS 1
- path: 'packages/bms/bms_combine_FAKE.yaml'
vars:
bms_id: '1' # must be a number
bms_name: 'BMS 1'
# BMS sensors values
bms_battery_capacity: '280' # Ah
bms_battery_capacity_remaining: '243' # Ah
bms_voltage: '53.45' # V
bms_current: '9.2' # A
bms_power: '492' # W
bms_soc: '87' # %
bms_soh: '98' # %
bms_min_cell_voltage: '3.339' # V
bms_min_voltage_cell: '2' # cell number 1~16
bms_max_cell_voltage: '3.341' # V
bms_max_voltage_cell: '11' # cell number 1~16
bms_temperature_sensor_1: '21.1' # °C
bms_temperature_sensor_2: '21.3' # °C
bms_temperature_sensor_3: '21.5' # °C
bms_temperature_sensor_4: '21.7' # °C
bms_max_charge_current: '100' # A
bms_max_discharge_current: '100' # A
bms_cell_ovp: '3.650' # V Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions
bms_charging_cycles: '178' # charging cycles number Used to calculate the SoH
# BMS 2
- path: 'packages/bms/bms_combine_FAKE.yaml'
vars:
bms_id: '2' # must be a number
bms_name: 'BMS 2'
# BMS sensors values
bms_battery_capacity: '280' # Ah
bms_battery_capacity_remaining: '238' # Ah
bms_voltage: '53.41' # V
bms_current: '11.3' # A
bms_power: '604' # W
bms_soc: '85' # %
bms_soh: '89' # %
bms_min_cell_voltage: '3.337' # V
bms_min_voltage_cell: '14' # cell number 1~16
bms_max_cell_voltage: '3.339' # V
bms_max_voltage_cell: '3' # cell number 1~16
bms_temperature_sensor_1: '21.8' # °C
bms_temperature_sensor_2: '21.6' # °C
bms_temperature_sensor_3: '21.4' # °C
bms_temperature_sensor_4: '21.2' # °C
bms_max_charge_current: '100' # A
bms_max_discharge_current: '100' # A
bms_cell_ovp: '3.650' # V Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions
bms_charging_cycles: '226' # charging cycles number Used to calculate the SoH
# BMS 3
- path: 'packages/bms/bms_combine_FAKE.yaml'
vars:
bms_id: '3' # must be a number
bms_name: 'BMS 3'
# BMS sensors values
bms_battery_capacity: '280' # Ah
bms_battery_capacity_remaining: '232' # Ah
bms_voltage: '53.37' # V
bms_current: '15.7' # A
bms_power: '838' # W
bms_soc: '83' # %
bms_soh: '79' # %
bms_min_cell_voltage: '3.334' # V
bms_min_voltage_cell: '7' # cell number 1~16
bms_max_cell_voltage: '3.336' # V
bms_max_voltage_cell: '9' # cell number 1~16
bms_temperature_sensor_1: '21.9' # °C
bms_temperature_sensor_2: '22.0' # °C
bms_temperature_sensor_3: '22.1' # °C
bms_temperature_sensor_4: '22.2' # °C
bms_max_charge_current: '100' # A
bms_max_discharge_current: '100' # A
bms_cell_ovp: '3.650' # V Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions
bms_charging_cycles: '194' # charging cycles number Used to calculate the SoH
yambms:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: 'packages/yambms/yambms.yaml'
canbus:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: 'packages/yambms/yambms_canbus.yaml'
vars:
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_inverter_1'
canbus_light_id: 'esp_light'
# The CANBUS link will be considered down if no response from the inverter (0x305 frame) for 5s
# The Deye inverter sends the ACK 0x305 only when it receives the 0x356 frame.
canbus_link_timer: '5s'
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |
# +--------------------------------------+
debug:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: packages/base/device_debug_ESP32.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'
+303
View File
@@ -0,0 +1,303 @@
# Updated : 2025.06.16
# Version : 1.5.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
######################## YamBMS Remote Packages Version ########################
# You can compile this YAML directly without the `packages` folder.
# The packages will be automatically downloaded from GitHub.
# Don't forget to configure your WiFi credentials in the secrets.yaml
################################################################################
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: INFO # VERBOSE / DEBUG / INFO / WARN
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
# web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | Global Settings |
# +--------------------------------------+
substitutions:
# Name
name: '' # Name that can be added as a second prefix after the friendly name, you can leave it blank.
hostname: 'yambms' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS' # Prefix added in front of all entity names and also to classify them.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_id: 'yambms1'
yambms_name: 'YamBMS 1'
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# +--------------------------------------+
# | Shunt Settings |
# +--------------------------------------+
shunt_update_interval: '3s' # frequency at which Shunt data is refreshed
shunt_combine_interval: '1s' # frequency at which Shunt data is combined in YamBMS
# +--------------------------------------+
# | BMS Settings |
# +--------------------------------------+
bms_update_interval: '3s' # frequency at which BMS data is refreshed, going below '3s' can cause problems
bms_combine_interval: '1s' # frequency at which BMS data is combined in YamBMS
bms_cutoff_timer: '50s' # time during which the end of charge conditions must be respected (cut-off + cells not equalizing)
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
packages:
################ >>> CONFIG & CUSTOM LP <<< ################
# Local Packages intended for creating custom codes
# or sharing settings between several main.yaml
# yambms_config: !include yambms_config.yaml
# yambms_custom: !include yambms_custom.yaml
############### >>> UNCOMMENT YOUR BOARD <<< ###############
############### >>> ONLY ONE BOARD ! <<< ###############
board:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: 'packages/board/board_ESP32_Generic.yaml'
# - path: 'packages/board/board_ESP32_DevKit-V1.yaml'
# - path: 'packages/board/board_ESP32_Atom-Lite.yaml'
# - path: 'packages/board/board_ESP32_EVB.yaml'
# - path: 'packages/board/board_ESP32_LilyGo-T-CAN485.yaml'
# - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
# - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
# - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
# - path: 'packages/board/board_ESP32-S3_DevKitC-1_LED-38.yaml'
# - path: 'packages/board/board_ESP32-S3_DevKitC-1_LED-48.yaml'
# - path: 'packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml'
# - path: 'packages/board/board_ESP32-S3_Touch-LCD-4.3.yaml'
# - path: 'packages/board/board_ESP32-S3_Touch-LCD-7.yaml'
# - path: 'packages/board/board_ESP32-S3_XIAO.yaml'
# - path: 'packages/board/board_ESP32-S3_YBoard.yaml'
# - path: 'packages/board/board_ESP32-S3_AtomS3.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
# - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
# LilyGo T-Connect Pro
# Importing the display also activates PSRAM.
# Also note that the display update takes about 120 ms, as indicated in the logs:
# "Component display took a long time for an operation (124 ms)."
# Board
# - path: 'packages/board/board_ESP32-S3_LilyGo-T-Connect-Pro.yaml'
# Display
# - path: 'packages/board/board_options_display_480x222.yaml'
# vars:
# display_auto_next_page_interval: '5s'
########### >>> UNCOMMENT YOUR BOARD OPTIONS <<< ###########
board_options:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
# UART 1
- path: 'packages/board/board_options_itf_uart_esp_1.yaml'
# UART 2
# - path: 'packages/board/board_options_itf_uart_esp_2.yaml'
# UART 3
# - path: 'packages/board/board_options_itf_uart_esp_3.yaml'
# ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit)
- path: 'packages/board/board_options_itf_canbus_esp32_can.yaml'
vars:
canbus_node_id: 'canbus_inverter_1'
# MCP2515
# - path: 'packages/board/board_options_itf_canbus_mcp2515.yaml'
# vars:
# canbus_node_id: 'canbus_inverter_1'
############################################################
# You don't have to import a shunt but you must import at least one BMS.
# UART Shunt
# shunt:
# url: https://github.com/Sleeper85/esphome-yambms
# ref: main
# refresh: 0s
# files:
# # Shunt 1
# - path: 'packages/shunt/shunt_combine_Victron_SmartShunt_UART.yaml' # shunt_combine_Junctek_KHF_UART.yaml
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_uart_id: 'uart_esp_3'
# BLE Shunt
# shunt:
# url: https://github.com/Sleeper85/esphome-yambms
# ref: main
# refresh: 0s
# files:
# # Shunt 1
# - path: 'packages/shunt/shunt_combine_Victron_SmartShunt_BLE.yaml'
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_mac_address: '60:A4:23:91:8F:55' # Your MAC address
# shunt_encryption_key: '0df4d0395b7d1a876c0c33ecb9e70dcd' # Your encryption key
bms:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
# BMS 1
- path: 'packages/bms/bms_combine_JBD_UART_full.yaml'
vars:
bms_id: '1' # must be a number
bms_name: 'BMS 1'
bms_uart_id: 'uart_esp_1'
bms_rx_timeout: '150ms'
# Required settings cannot be retrieved from BMS
# These values ​​must match your BMS settings
# LFP values example
bms_max_charge_current: '100' # A. Used to calculate maximum charge current
bms_max_discharge_current: '100' # A. Used to calculate maximum discharge current
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
# BMS 2
- path: 'packages/bms/bms_combine_JBD_BLE_full.yaml'
vars:
bms_id: '2' # must be a number
bms_name: 'BMS 2'
bms_ble_mac_address: 'C8:47:8C:10:7E:AA' # Your MAC address
# Required settings cannot be retrieved from BMS
# These values ​​must match your BMS settings
# LFP values example
bms_max_charge_current: '100' # A. Used to calculate maximum charge current
bms_max_discharge_current: '100' # A. Used to calculate maximum discharge current
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
yambms:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: 'packages/yambms/yambms.yaml'
canbus:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: 'packages/yambms/yambms_canbus.yaml'
vars:
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_inverter_1'
canbus_light_id: 'esp_light'
# The CANBUS link will be considered down if no response from the inverter (0x305 frame) for 5s
# The Deye inverter sends the ACK 0x305 only when it receives the 0x356 frame.
canbus_link_timer: '5s'
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |
# +--------------------------------------+
debug:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: packages/base/device_debug_ESP32.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'
+346
View File
@@ -0,0 +1,346 @@
# Updated : 2025.06.14
# Version : 1.5.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
######################## YamBMS Remote Packages Version ########################
# You can compile this YAML directly without the `packages` folder.
# The packages will be automatically downloaded from GitHub.
# Don't forget to configure your WiFi credentials in the secrets.yaml
################################################################################
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: INFO # VERBOSE / DEBUG / INFO / WARN
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
# web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | Global Settings |
# +--------------------------------------+
substitutions:
# Name
name: '' # Name that can be added as a second prefix after the friendly name, you can leave it blank.
hostname: 'yambms' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS' # Prefix added in front of all entity names and also to classify them.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_id: 'yambms1'
yambms_name: 'YamBMS 1'
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# +--------------------------------------+
# | Shunt Settings |
# +--------------------------------------+
shunt_update_interval: '3s' # frequency at which Shunt data is refreshed
shunt_combine_interval: '1s' # frequency at which Shunt data is combined in YamBMS
# +--------------------------------------+
# | BMS Settings |
# +--------------------------------------+
bms_update_interval: '3s' # frequency at which BMS data is refreshed, going below '3s' can cause problems
bms_combine_interval: '1s' # frequency at which BMS data is combined in YamBMS
bms_cutoff_timer: '50s' # time during which the end of charge conditions must be respected (cut-off + cells not equalizing)
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
packages:
################ >>> CONFIG & CUSTOM LP <<< ################
# Local Packages intended for creating custom codes
# or sharing settings between several main.yaml
# yambms_config: !include yambms_config.yaml
# yambms_custom: !include yambms_custom.yaml
############### >>> UNCOMMENT YOUR BOARD <<< ###############
############### >>> ONLY ONE BOARD ! <<< ###############
board:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
# - path: 'packages/board/board_ESP32_Generic.yaml'
# - path: 'packages/board/board_ESP32_DevKit-V1.yaml'
# - path: 'packages/board/board_ESP32_Atom-Lite.yaml'
# - path: 'packages/board/board_ESP32_EVB.yaml'
# - path: 'packages/board/board_ESP32_LilyGo-T-CAN485.yaml'
# - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
# - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
# - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
# - path: 'packages/board/board_ESP32-S3_DevKitC-1_LED-38.yaml'
# - path: 'packages/board/board_ESP32-S3_DevKitC-1_LED-48.yaml'
- path: 'packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml'
# - path: 'packages/board/board_ESP32-S3_Touch-LCD-4.3.yaml'
# - path: 'packages/board/board_ESP32-S3_Touch-LCD-7.yaml'
# - path: 'packages/board/board_ESP32-S3_XIAO.yaml'
# - path: 'packages/board/board_ESP32-S3_YBoard.yaml'
# - path: 'packages/board/board_ESP32-S3_AtomS3.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
# - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
# LilyGo T-Connect Pro
# Importing the display also activates PSRAM.
# Also note that the display update takes about 120 ms, as indicated in the logs:
# "Component display took a long time for an operation (124 ms)."
# Board
# - path: 'packages/board/board_ESP32-S3_LilyGo-T-Connect-Pro.yaml'
# Display
# - path: 'packages/board/board_options_display_480x222.yaml'
# vars:
# display_auto_next_page_interval: '5s'
########### >>> UNCOMMENT YOUR BOARD OPTIONS <<< ###########
board_options:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
# UART 1
- path: 'packages/board/board_options_itf_uart_esp_1.yaml'
# UART 2
# - path: 'packages/board/board_options_itf_uart_esp_2.yaml'
# UART 3
# - path: 'packages/board/board_options_itf_uart_esp_3.yaml'
# ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit)
- path: 'packages/board/board_options_itf_canbus_esp32_can.yaml'
vars:
canbus_node_id: 'canbus_inverter_1'
# MCP2515
# - path: 'packages/board/board_options_itf_canbus_mcp2515.yaml'
# vars:
# canbus_node_id: 'canbus_inverter_1'
############################################################
# You don't have to import a shunt but you must import at least one BMS.
# UART Shunt
# shunt:
# url: https://github.com/Sleeper85/esphome-yambms
# ref: main
# refresh: 0s
# files:
# # Shunt 1
# - path: 'packages/shunt/shunt_combine_Victron_SmartShunt_UART.yaml' # shunt_combine_Junctek_KHF_UART.yaml
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_uart_id: 'uart_esp_3'
# BLE Shunt
# shunt:
# url: https://github.com/Sleeper85/esphome-yambms
# ref: main
# refresh: 0s
# files:
# # Shunt 1
# - path: 'packages/shunt/shunt_combine_Victron_SmartShunt_BLE.yaml'
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_mac_address: '60:A4:23:91:8F:55' # Your MAC address
# shunt_encryption_key: '0df4d0395b7d1a876c0c33ecb9e70dcd' # Your encryption key
bms:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
# RS485 Sniffer
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_sniffer.yaml'
vars:
sniffer_id: 'sniffer1'
sniffer_protocol: 'JK02_32S'
sniffer_uart_id: 'uart_esp_1'
# BMS 1
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml'
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '1' # must be a number
bms_name: 'JK-BMS 1'
bms_address: '0x01' # BMS 1 ( JK app `Device Addr.` setting )
# BMS 2
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml'
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '2' # must be a number
bms_name: 'JK-BMS 2'
bms_address: '0x02' # BMS 2 ( JK app `Device Addr.` setting )
# BMS 3
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml'
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '3' # must be a number
bms_name: 'JK-BMS 3'
bms_address: '0x03' # BMS 3 ( JK app `Device Addr.` setting )
# BMS 4
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml'
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '4' # must be a number
bms_name: 'JK-BMS 4'
bms_address: '0x04' # BMS 4 ( JK app `Device Addr.` setting )
# BMS 5
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml'
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '5' # must be a number
bms_name: 'JK-BMS 5'
bms_address: '0x05' # BMS 5 ( JK app `Device Addr.` setting )
# BMS 6
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml'
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '6' # must be a number
bms_name: 'JK-BMS 6'
bms_address: '0x06' # BMS 6 ( JK app `Device Addr.` setting )
# BMS 7
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml'
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '7' # must be a number
bms_name: 'JK-BMS 7'
bms_address: '0x07' # BMS 7 ( JK app `Device Addr.` setting )
# BMS 8
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml'
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '8' # must be a number
bms_name: 'JK-BMS 8'
bms_address: '0x08' # BMS 8 ( JK app `Device Addr.` setting )
yambms:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: 'packages/yambms/yambms.yaml'
canbus:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: 'packages/yambms/yambms_canbus.yaml'
vars:
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_inverter_1'
canbus_light_id: 'esp_light'
# The CANBUS link will be considered down if no response from the inverter (0x305 frame) for 5s
# The Deye inverter sends the ACK 0x305 only when it receives the 0x356 frame.
canbus_link_timer: '5s'
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |
# +--------------------------------------+
debug:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: packages/base/device_debug_ESP32.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'
@@ -1,5 +1,5 @@
# Updated : 2025.04.01
# Version : 1.5.4
# Updated : 2025.06.14
# Version : 1.5.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -17,17 +17,14 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
logger:
level: INFO # VERBOSE / DEBUG / INFO / WARN
######################## YamBMS Remote Packages Version ########################
ota:
platform: esphome
# You can compile this YAML directly without the `packages` folder.
# The packages will be automatically downloaded from GitHub.
# Don't forget to configure your WiFi credentials in the secrets.yaml
api:
reboot_timeout: 0s
################################################################################
# Don't forget to configure your WiFi credentials in the secrets.yaml file
#
# If needed, configure a static IP here
# wifi:
# manual_ip:
@@ -37,11 +34,42 @@ api:
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: INFO # VERBOSE / DEBUG / INFO / WARN
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
# web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | Global Settings |
# +--------------------------------------+
substitutions:
name: yambms # ESP32 name / hostname
# Name
name: '' # Name that can be added as a second prefix after the friendly name, you can leave it blank.
hostname: 'yambms' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS' # Prefix added in front of all entity names and also to classify them.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
@@ -69,8 +97,6 @@ substitutions:
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# Maximum charging cycles is used to calculate the battey SOH, LF280K v3 =8000.0, LF280K v2 =6000.0, LF280=3000.0 (decimal is required)
yambms_max_cycles: '6000.0'
# +--------------------------------------+
# | Shunt Settings |
# +--------------------------------------+
@@ -86,8 +112,19 @@ substitutions:
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
packages:
################ >>> CONFIG & CUSTOM LP <<< ################
# Local Packages intended for creating custom codes
# or sharing settings between several main.yaml
# yambms_config: !include yambms_config.yaml
# yambms_custom: !include yambms_custom.yaml
############### >>> UNCOMMENT YOUR BOARD <<< ###############
############### >>> ONLY ONE BOARD ! <<< ###############
@@ -96,20 +133,97 @@ packages:
ref: main
refresh: 0s
files:
# - path: 'packages/board/board_ESP32_Generic.yaml'
# - path: 'packages/board/board_ESP32_DevKit-V1.yaml'
# - path: 'packages/board/board_ESP32_Atom-Lite.yaml'
# - path: 'packages/board/board_ESP32_EVB.yaml'
# - path: 'packages/board/board_ESP32_LilyGo-T-CAN485.yaml'
# - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
# - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
# - path: 'packages/board/board_ESP32-S3_DevKitC-1.yaml'
# - path: 'packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml'
# - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
- path: 'packages/board/board_ESP32-S3_AtomS3.yaml'
vars:
display_auto_next_page_interval: '5s'
# - path: 'packages/board/board_ESP32-S3_DevKitC-1_LED-38.yaml'
# - path: 'packages/board/board_ESP32-S3_DevKitC-1_LED-48.yaml'
- path: 'packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml'
# - path: 'packages/board/board_ESP32-S3_Touch-LCD-4.3.yaml'
# - path: 'packages/board/board_ESP32-S3_Touch-LCD-7.yaml'
# - path: 'packages/board/board_ESP32-S3_XIAO.yaml'
# - path: 'packages/board/board_ESP32-S3_YBoard.yaml'
# - path: 'packages/board/board_ESP32-S3_AtomS3.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
# - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
############################################################
# LilyGo T-Connect Pro
# Importing the display also activates PSRAM.
# Also note that the display update takes about 120 ms, as indicated in the logs:
# "Component display took a long time for an operation (124 ms)."
# Board
# - path: 'packages/board/board_ESP32-S3_LilyGo-T-Connect-Pro.yaml'
# Display
# - path: 'packages/board/board_options_display_480x222.yaml'
# vars:
# display_auto_next_page_interval: '5s'
########### >>> UNCOMMENT YOUR BOARD OPTIONS <<< ###########
board_options:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
# UART 1
- path: 'packages/board/board_options_itf_uart_esp_1.yaml'
# UART 2
# - path: 'packages/board/board_options_itf_uart_esp_2.yaml'
# UART 3
# - path: 'packages/board/board_options_itf_uart_esp_3.yaml'
# ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit)
- path: 'packages/board/board_options_itf_canbus_esp32_can.yaml'
vars:
canbus_node_id: 'canbus_inverter_1'
# MCP2515
# - path: 'packages/board/board_options_itf_canbus_mcp2515.yaml'
# vars:
# canbus_node_id: 'canbus_inverter_1'
############################################################
# You don't have to import a shunt but you must import at least one BMS.
# UART Shunt
# shunt:
# url: https://github.com/Sleeper85/esphome-yambms
# ref: main
# refresh: 0s
# files:
# # Shunt 1
# - path: 'packages/shunt/shunt_combine_Victron_SmartShunt_UART.yaml' # shunt_combine_Junctek_KHF_UART.yaml
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_uart_id: 'uart_esp_3'
# BLE Shunt
# shunt:
# url: https://github.com/Sleeper85/esphome-yambms
# ref: main
# refresh: 0s
# files:
# # Shunt 1
# - path: 'packages/shunt/shunt_combine_Victron_SmartShunt_BLE.yaml'
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_mac_address: '60:A4:23:91:8F:55' # Your MAC address
# shunt_encryption_key: '0df4d0395b7d1a876c0c33ecb9e70dcd' # Your encryption key
bms:
url: https://github.com/Sleeper85/esphome-yambms
@@ -117,13 +231,13 @@ packages:
refresh: 0s
files:
# RS485 Sniffer
- path: 'packages/bms/bms_combine_JK-PB_RS485_sniffer.yaml'
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_sniffer.yaml'
vars:
sniffer_id: 'sniffer1'
sniffer_protocol: 'JK02_32S'
sniffer_uart_id: 'uart_esp_1'
# BMS 1
- path: 'packages/bms/bms_combine_JK-PB_RS485_bms_standard.yaml'
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml'
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
@@ -132,7 +246,7 @@ packages:
bms_name: 'JK-BMS 1'
bms_address: '0x01' # BMS 1 DIP switch
# BMS 2
- path: 'packages/bms/bms_combine_JK-PB_RS485_bms_standard.yaml'
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml'
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
@@ -141,7 +255,7 @@ packages:
bms_name: 'JK-BMS 2'
bms_address: '0x02' # BMS 2 DIP switch
# BMS 3
- path: 'packages/bms/bms_combine_JK-PB_RS485_bms_standard.yaml'
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml'
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
@@ -150,7 +264,7 @@ packages:
bms_name: 'JK-BMS 3'
bms_address: '0x03' # BMS 3 DIP switch
# BMS 4
- path: 'packages/bms/bms_combine_JK-PB_RS485_bms_standard.yaml'
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml'
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
@@ -159,7 +273,7 @@ packages:
bms_name: 'JK-BMS 4'
bms_address: '0x04' # BMS 4 DIP switch
# BMS 5
- path: 'packages/bms/bms_combine_JK-PB_RS485_bms_standard.yaml'
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml'
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
@@ -168,7 +282,7 @@ packages:
bms_name: 'JK-BMS 5'
bms_address: '0x05' # BMS 5 DIP switch
# BMS 6
- path: 'packages/bms/bms_combine_JK-PB_RS485_bms_standard.yaml'
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml'
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
@@ -177,7 +291,7 @@ packages:
bms_name: 'JK-BMS 6'
bms_address: '0x06' # BMS 6 DIP switch
# BMS 7
- path: 'packages/bms/bms_combine_JK-PB_RS485_bms_standard.yaml'
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml'
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
@@ -185,6 +299,15 @@ packages:
bms_id: '7' # must be a number
bms_name: 'JK-BMS 7'
bms_address: '0x07' # BMS 7 DIP switch
# BMS 8
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml'
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '8' # must be a number
bms_name: 'JK-BMS 8'
bms_address: '0x08' # BMS 8 DIP switch
yambms:
url: https://github.com/Sleeper85/esphome-yambms
@@ -192,12 +315,8 @@ packages:
refresh: 0s
files:
- path: 'packages/yambms/yambms.yaml'
# - path: 'packages/yambms/yambms_custom.yaml'
# Custom Local YAML
# yambms_custom: !include yambms_custom.yaml
canbus1:
canbus:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
@@ -206,10 +325,10 @@ packages:
vars:
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_node1'
canbus_node_id: 'canbus_inverter_1'
canbus_light_id: 'esp_light'
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
# The CANBUS link will be considered down if no response from the inverter (0x305 frame) for 5s
# The Deye inverter sends the ACK 0x305 only when it receives the 0x356 frame.
canbus_link_timer: '5s'
# +--------------------------------------+
+302
View File
@@ -0,0 +1,302 @@
# Updated : 2025.06.14
# Version : 1.5.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
######################## YamBMS Remote Packages Version ########################
# You can compile this YAML directly without the `packages` folder.
# The packages will be automatically downloaded from GitHub.
# Don't forget to configure your WiFi credentials in the secrets.yaml
################################################################################
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: INFO # VERBOSE / DEBUG / INFO / WARN
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
# web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | Global Settings |
# +--------------------------------------+
substitutions:
# Name
name: '' # Name that can be added as a second prefix after the friendly name, you can leave it blank.
hostname: 'yambms' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS' # Prefix added in front of all entity names and also to classify them.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_id: 'yambms1'
yambms_name: 'YamBMS 1'
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# +--------------------------------------+
# | Shunt Settings |
# +--------------------------------------+
shunt_update_interval: '3s' # frequency at which Shunt data is refreshed
shunt_combine_interval: '1s' # frequency at which Shunt data is combined in YamBMS
# +--------------------------------------+
# | BMS Settings |
# +--------------------------------------+
bms_update_interval: '3s' # frequency at which BMS data is refreshed, going below '3s' can cause problems
bms_combine_interval: '1s' # frequency at which BMS data is combined in YamBMS
bms_cutoff_timer: '50s' # time during which the end of charge conditions must be respected (cut-off + cells not equalizing)
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
packages:
################ >>> CONFIG & CUSTOM LP <<< ################
# Local Packages intended for creating custom codes
# or sharing settings between several main.yaml
# yambms_config: !include yambms_config.yaml
# yambms_custom: !include yambms_custom.yaml
############### >>> UNCOMMENT YOUR BOARD <<< ###############
############### >>> ONLY ONE BOARD ! <<< ###############
board:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: 'packages/board/board_ESP32_Generic.yaml'
# - path: 'packages/board/board_ESP32_DevKit-V1.yaml'
# - path: 'packages/board/board_ESP32_Atom-Lite.yaml'
# - path: 'packages/board/board_ESP32_EVB.yaml'
# - path: 'packages/board/board_ESP32_LilyGo-T-CAN485.yaml'
# - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
# - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
# - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
# - path: 'packages/board/board_ESP32-S3_DevKitC-1_LED-38.yaml'
# - path: 'packages/board/board_ESP32-S3_DevKitC-1_LED-48.yaml'
# - path: 'packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml'
# - path: 'packages/board/board_ESP32-S3_Touch-LCD-4.3.yaml'
# - path: 'packages/board/board_ESP32-S3_Touch-LCD-7.yaml'
# - path: 'packages/board/board_ESP32-S3_XIAO.yaml'
# - path: 'packages/board/board_ESP32-S3_YBoard.yaml'
# - path: 'packages/board/board_ESP32-S3_AtomS3.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
# - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
# LilyGo T-Connect Pro
# Importing the display also activates PSRAM.
# Also note that the display update takes about 120 ms, as indicated in the logs:
# "Component display took a long time for an operation (124 ms)."
# Board
# - path: 'packages/board/board_ESP32-S3_LilyGo-T-Connect-Pro.yaml'
# Display
# - path: 'packages/board/board_options_display_480x222.yaml'
# vars:
# display_auto_next_page_interval: '5s'
########### >>> UNCOMMENT YOUR BOARD OPTIONS <<< ###########
board_options:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
# UART 1
# - path: 'packages/board/board_options_itf_uart_esp_1.yaml'
# UART 2
# - path: 'packages/board/board_options_itf_uart_esp_2.yaml'
# UART 3
# - path: 'packages/board/board_options_itf_uart_esp_3.yaml'
# ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit)
- path: 'packages/board/board_options_itf_canbus_esp32_can.yaml'
vars:
canbus_node_id: 'canbus_inverter_1'
# MCP2515
# - path: 'packages/board/board_options_itf_canbus_mcp2515.yaml'
# vars:
# canbus_node_id: 'canbus_inverter_1'
############################################################
# You don't have to import a shunt but you must import at least one BMS.
# UART Shunt
# shunt:
# url: https://github.com/Sleeper85/esphome-yambms
# ref: main
# refresh: 0s
# files:
# # Shunt 1
# - path: 'packages/shunt/shunt_combine_Victron_SmartShunt_UART.yaml' # shunt_combine_Junctek_KHF_UART.yaml
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_uart_id: 'uart_esp_1'
# BLE Shunt
# shunt:
# url: https://github.com/Sleeper85/esphome-yambms
# ref: main
# refresh: 0s
# files:
# # Shunt 1
# - path: 'packages/shunt/shunt_combine_Victron_SmartShunt_BLE.yaml'
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_mac_address: '60:A4:23:91:8F:55' # Your MAC address
# shunt_encryption_key: '0df4d0395b7d1a876c0c33ecb9e70dcd' # Your encryption key
bms:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
# BMS 1
- path: 'packages/bms/bms_combine_JK_BLE_standard.yaml'
vars:
bms_id: '1' # must be a number
bms_name: 'JK-BMS 1'
bms_ble_protocol_version: 'JK02_32S' # JK02_24S < hardware version 11.0 >= JK02_32S
bms_ble_mac_address: 'C8:47:8C:10:7E:AA'
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
# BMS 2
- path: 'packages/bms/bms_combine_JK_BLE_standard.yaml'
vars:
bms_id: '2' # must be a number
bms_name: 'JK-BMS 2'
bms_ble_protocol_version: 'JK02_32S' # JK02_24S < hardware version 11.0 >= JK02_32S
bms_ble_mac_address: 'C8:47:8C:EE:16:EA'
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
# bms_options:
# url: https://github.com/Sleeper85/esphome-yambms
# ref: main
# refresh: 0s
# files:
# # BMS 1
# - path: 'packages/bms/bms_options_charging_logic.yaml'
# vars:
# bms_id: '1' # must be a number
# # BMS 2
# - path: 'packages/bms/bms_options_charging_logic.yaml'
# vars:
# bms_id: '2' # must be a number
yambms:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: 'packages/yambms/yambms.yaml'
canbus:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: 'packages/yambms/yambms_canbus.yaml'
vars:
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_inverter_1'
canbus_light_id: 'esp_light'
# The CANBUS link will be considered down if no response from the inverter (0x305 frame) for 5s
# The Deye inverter sends the ACK 0x305 only when it receives the 0x356 frame.
canbus_link_timer: '5s'
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |
# +--------------------------------------+
debug:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: packages/base/device_debug_ESP32.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'
@@ -1,5 +1,5 @@
# Updated : 2025.04.01
# Version : 1.5.4
# Updated : 2025.06.12
# Version : 1.5.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -17,23 +17,14 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
# esp32:
# framework:
# type: esp-idf
# version: 4.4.8
# platform_version: 5.4.0
######################## YamBMS Remote Packages Version ########################
logger:
level: INFO # VERBOSE / DEBUG / INFO / WARN
# You can compile this YAML directly without the `packages` folder.
# The packages will be automatically downloaded from GitHub.
# Don't forget to configure your WiFi credentials in the secrets.yaml
ota:
platform: esphome
################################################################################
api:
reboot_timeout: 0s
# Don't forget to configure your WiFi credentials in the secrets.yaml file
#
# If needed, configure a static IP here
# wifi:
# manual_ip:
@@ -43,11 +34,42 @@ api:
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: INFO # VERBOSE / DEBUG / INFO / WARN
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
# web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | Global Settings |
# +--------------------------------------+
substitutions:
name: yambms # ESP32 name / hostname
# Name
name: '' # Name that can be added as a second prefix after the friendly name, you can leave it blank.
hostname: 'pvbrain2' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS' # Prefix added in front of all entity names and also to classify them.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
@@ -75,8 +97,6 @@ substitutions:
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# Maximum charging cycles is used to calculate the battey SOH, LF280K v3 =8000.0, LF280K v2 =6000.0, LF280=3000.0 (decimal is required)
yambms_max_cycles: '6000.0'
# +--------------------------------------+
# | Shunt Settings |
# +--------------------------------------+
@@ -88,50 +108,94 @@ substitutions:
bms_update_interval: '3s' # frequency at which BMS data is refreshed, going below '3s' can cause problems
bms_combine_interval: '1s' # frequency at which BMS data is combined in YamBMS
bms_cutoff_timer: '50s' # time during which the end of charge conditions must be respected (cut-off + cells not equalizing)
# +--------------------------------------+
# | WK2168 UART expander |
# +--------------------------------------+
uart0_baudrate: '2400' #WKS {RJ45-UART0}
uart1_baudrate: '38400' #JSY193
uart2_baudrate: '19200' #SmartShunt
uart3_baudrate: '9600' #SRNE {RJ45-UART3}
uart4_baudrate: '115200' #JK-BMS 1
uart5_baudrate: '115200' #JK-BMS 2
uart6_baudrate: '115200' #Pylontech
uart7_baudrate: '9600' #EPEVER {RJ45-UART7}
# +--------------------------------------+
# | Packages |
# | PVbrain2 packages |
# +--------------------------------------+
packages:
############### >>> UNCOMMENT YOUR BOARD <<< ###############
############### >>> ONLY ONE BOARD ! <<< ###############
board:
pvbrain2:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: 'packages/board/board_ESP32_DevKit-V1.yaml'
# - path: 'packages/board/board_ESP32_LilyGo-T-CAN485.yaml'
# - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
# - path: 'packages/board/board_ESP32-S3_DevKitC-1.yaml'
# - path: 'packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml'
# - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
# - path: 'packages/board/board_ESP32-S3_AtomS3.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml'
# vars:
# display_auto_next_page_interval: '5s'
- path: 'packages/board/board_ESP32-S3_DevKitC-1_PVbrain2.yaml'
# BUS
# - path: 'pvbrain2/base/device_bus_i2c0.yaml' # SX1509 and BME280/BMP280
- path: 'pvbrain2/base/device_bus_spi1.yaml' # MCP2515
- path: 'pvbrain2/base/device_bus_one_wire.yaml' # Dallas
# Devices
# - path: 'pvbrain2/base/device_uart_esp.yaml'
- path: 'pvbrain2/base/device_wk2168_spi.yaml'
# - path: 'pvbrain2/base/device_wk2168_i2c.yaml'
# - path: 'pvbrain2/base/device_sx1509.yaml'
- path: 'pvbrain2/base/device_canbus_esp32can.yaml' # canbus_node1
- path: 'pvbrain2/base/device_canbus_mcp2515.yaml' # canbus_node2
############################################################
# +--------------------------------------+
# | YamBMS packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
################ >>> CONFIG & CUSTOM LP <<< ################
# Local Packages intended for creating custom codes
# or sharing settings between several main.yaml
# yambms_config: !include yambms_config.yaml
# yambms_custom: !include yambms_custom.yaml
############################################################
# You don't have to import a shunt but you must import at least one BMS.
# shunt:
# url: https://github.com/Sleeper85/esphome-yambms
# ref: main
# refresh: 0s
# files:
# # Shunt 1
# - path: 'packages/shunt/shunt_combine_Victron_SmartShunt_UART_expander.yaml' # shunt_combine_Junctek_KHF_UART.yaml
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_uart_id: 'uart_${uart_hub_bus}_2'
bms:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: 'packages/bms/bms_combine_JK-B_UART_full.yaml'
# BMS 1
- path: 'packages/bms/bms_combine_JK_UART_4G-GPS_full.yaml'
vars:
bms_id: '1' # must be a number
bms_name: 'JK-BMS 1'
bms_uart_id: 'uart_esp_1'
- path: 'packages/bms/bms_combine_JK-B_UART_full.yaml'
bms_uart_id: 'uart_${uart_hub_bus}_4'
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
# BMS 2
- path: 'packages/bms/bms_combine_JK_UART_4G-GPS_full.yaml'
vars:
bms_id: '2' # must be a number
bms_name: 'JK-BMS 2'
bms_uart_id: 'uart_esp_2'
bms_uart_id: 'uart_${uart_hub_bus}_5'
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
yambms:
url: https://github.com/Sleeper85/esphome-yambms
@@ -139,12 +203,8 @@ packages:
refresh: 0s
files:
- path: 'packages/yambms/yambms.yaml'
# - path: 'packages/yambms/yambms_custom.yaml'
# Custom Local YAML
# yambms_custom: !include yambms_custom.yaml
canbus1:
canbus:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
+312
View File
@@ -0,0 +1,312 @@
# Updated : 2025.06.16
# Version : 1.5.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
######################## YamBMS Remote Packages Version ########################
# You can compile this YAML directly without the `packages` folder.
# The packages will be automatically downloaded from GitHub.
# Don't forget to configure your WiFi credentials in the secrets.yaml
################################################################################
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: INFO # VERBOSE / DEBUG / INFO / WARN
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
# web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | Global Settings |
# +--------------------------------------+
substitutions:
# Name
name: '' # Name that can be added as a second prefix after the friendly name, you can leave it blank.
hostname: 'yambms' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS' # Prefix added in front of all entity names and also to classify them.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_id: 'yambms1'
yambms_name: 'YamBMS 1'
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# +--------------------------------------+
# | Shunt Settings |
# +--------------------------------------+
shunt_update_interval: '3s' # frequency at which Shunt data is refreshed
shunt_combine_interval: '1s' # frequency at which Shunt data is combined in YamBMS
# +--------------------------------------+
# | BMS Settings |
# +--------------------------------------+
bms_update_interval: '3s' # frequency at which BMS data is refreshed, going below '3s' can cause problems
bms_combine_interval: '1s' # frequency at which BMS data is combined in YamBMS
bms_cutoff_timer: '50s' # time during which the end of charge conditions must be respected (cut-off + cells not equalizing)
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
packages:
################ >>> CONFIG & CUSTOM LP <<< ################
# Local Packages intended for creating custom codes
# or sharing settings between several main.yaml
# yambms_config: !include yambms_config.yaml
# yambms_custom: !include yambms_custom.yaml
############### >>> UNCOMMENT YOUR BOARD <<< ###############
############### >>> ONLY ONE BOARD ! <<< ###############
board:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: 'packages/board/board_ESP32_Generic.yaml'
# - path: 'packages/board/board_ESP32_DevKit-V1.yaml'
# - path: 'packages/board/board_ESP32_Atom-Lite.yaml'
# - path: 'packages/board/board_ESP32_EVB.yaml'
# - path: 'packages/board/board_ESP32_LilyGo-T-CAN485.yaml'
# - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
# - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
# - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
# - path: 'packages/board/board_ESP32-S3_DevKitC-1_LED-38.yaml'
# - path: 'packages/board/board_ESP32-S3_DevKitC-1_LED-48.yaml'
# - path: 'packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml'
# - path: 'packages/board/board_ESP32-S3_Touch-LCD-4.3.yaml'
# - path: 'packages/board/board_ESP32-S3_Touch-LCD-7.yaml'
# - path: 'packages/board/board_ESP32-S3_XIAO.yaml'
# - path: 'packages/board/board_ESP32-S3_YBoard.yaml'
# - path: 'packages/board/board_ESP32-S3_AtomS3.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
# - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
# LilyGo T-Connect Pro
# Importing the display also activates PSRAM.
# Also note that the display update takes about 120 ms, as indicated in the logs:
# "Component display took a long time for an operation (124 ms)."
# Board
# - path: 'packages/board/board_ESP32-S3_LilyGo-T-Connect-Pro.yaml'
# Display
# - path: 'packages/board/board_options_display_480x222.yaml'
# vars:
# display_auto_next_page_interval: '5s'
########### >>> UNCOMMENT YOUR BOARD OPTIONS <<< ###########
board_options:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
# UART 1
- path: 'packages/board/board_options_itf_uart_esp_1.yaml'
# UART 2
# - path: 'packages/board/board_options_itf_uart_esp_2.yaml'
# UART 3
# - path: 'packages/board/board_options_itf_uart_esp_3.yaml'
# ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit)
- path: 'packages/board/board_options_itf_canbus_esp32_can.yaml'
vars:
canbus_node_id: 'canbus_inverter_1'
# MCP2515
# - path: 'packages/board/board_options_itf_canbus_mcp2515.yaml'
# vars:
# canbus_node_id: 'canbus_inverter_1'
############################################################
# You don't have to import a shunt but you must import at least one BMS.
# UART Shunt
# shunt:
# url: https://github.com/Sleeper85/esphome-yambms
# ref: main
# refresh: 0s
# files:
# # Shunt 1
# - path: 'packages/shunt/shunt_combine_Victron_SmartShunt_UART.yaml' # shunt_combine_Junctek_KHF_UART.yaml
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_uart_id: 'uart_esp_3'
# BLE Shunt
# shunt:
# url: https://github.com/Sleeper85/esphome-yambms
# ref: main
# refresh: 0s
# files:
# # Shunt 1
# - path: 'packages/shunt/shunt_combine_Victron_SmartShunt_BLE.yaml'
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_mac_address: '60:A4:23:91:8F:55' # Your MAC address
# shunt_encryption_key: '0df4d0395b7d1a876c0c33ecb9e70dcd' # Your encryption key
bms:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
# Seplos Modbus 1
- path: 'packages/bms/bms_combine_SEPLOS_V1_V2_RS485_modbus.yaml'
vars:
seplos_modbus_id: 'seplos_modbus1'
seplos_modbus_uart_id: 'uart_esp_1'
seplos_modbus_baud_rate: '9600' # 9600 / 19200 ; please set the baudrate of your Seplos BMS model here
seplos_modbus_rx_timeout: '150ms'
# BMS 1
- path: 'packages/bms/bms_combine_SEPLOS_V1_V2_RS485_bms_full.yaml'
vars:
# Seplos modbus ID
seplos_modbus_id: 'seplos_modbus1'
# BMS vars
bms_id: '1' # must be a number
bms_name: 'BMS 1'
bms_address: '0x01' # BMS 1 DIP switch
bms_protocol_version: '0x20' # Known protocol versions: 0x20 (Seplos), 0x26 (Boqiang)
# Required settings cannot be retrieved from BMS
# These values ​​must match your BMS settings
# LFP values example
bms_max_charge_current: '100' # A. Used to calculate maximum charge current
bms_max_discharge_current: '100' # A. Used to calculate maximum discharge current
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
# BMS 2
- path: 'packages/bms/bms_combine_SEPLOS_V1_V2_RS485_bms_full.yaml'
vars:
# Seplos modbus ID
seplos_modbus_id: 'seplos_modbus1'
# BMS vars
bms_id: '2' # must be a number
bms_name: 'BMS 2'
bms_address: '0x02' # BMS 2 DIP switch
bms_protocol_version: '0x20' # Known protocol versions: 0x20 (Seplos), 0x26 (Boqiang)
bms_uart_id: uart_esp_2
# Required settings cannot be retrieved from BMS
# These values ​​must match your BMS settings
# LFP values example
bms_max_charge_current: '100' # A. Used to calculate maximum charge current
bms_max_discharge_current: '100' # A. Used to calculate maximum discharge current
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
yambms:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: 'packages/yambms/yambms.yaml'
canbus:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: 'packages/yambms/yambms_canbus.yaml'
vars:
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_inverter_1'
canbus_light_id: 'esp_light'
# The CANBUS link will be considered down if no response from the inverter (0x305 frame) for 5s
# The Deye inverter sends the ACK 0x305 only when it receives the 0x356 frame.
canbus_link_timer: '5s'
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |
# +--------------------------------------+
debug:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: packages/base/device_debug_ESP32.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'
+300
View File
@@ -0,0 +1,300 @@
# Updated : 2025.06.14
# Version : 1.5.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
######################## YamBMS Remote Packages Version ########################
# You can compile this YAML directly without the `packages` folder.
# The packages will be automatically downloaded from GitHub.
# Don't forget to configure your WiFi credentials in the secrets.yaml
################################################################################
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: INFO # VERBOSE / DEBUG / INFO / WARN
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
# web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | Global Settings |
# +--------------------------------------+
substitutions:
# Name
name: '' # Name that can be added as a second prefix after the friendly name, you can leave it blank.
hostname: 'yambms' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS' # Prefix added in front of all entity names and also to classify them.
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_id: 'yambms1'
yambms_name: 'YamBMS 1'
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# +--------------------------------------+
# | Shunt Settings |
# +--------------------------------------+
shunt_update_interval: '3s' # frequency at which Shunt data is refreshed
shunt_combine_interval: '1s' # frequency at which Shunt data is combined in YamBMS
# +--------------------------------------+
# | BMS Settings |
# +--------------------------------------+
bms_update_interval: '3s' # frequency at which BMS data is refreshed, going below '3s' can cause problems
bms_combine_interval: '1s' # frequency at which BMS data is combined in YamBMS
bms_cutoff_timer: '50s' # time during which the end of charge conditions must be respected (cut-off + cells not equalizing)
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
packages:
################ >>> CONFIG & CUSTOM LP <<< ################
# Local Packages intended for creating custom codes
# or sharing settings between several main.yaml
# yambms_config: !include yambms_config.yaml
# yambms_custom: !include yambms_custom.yaml
############### >>> UNCOMMENT YOUR BOARD <<< ###############
############### >>> ONLY ONE BOARD ! <<< ###############
board:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: 'packages/board/board_ESP32_Generic.yaml'
# - path: 'packages/board/board_ESP32_DevKit-V1.yaml'
# - path: 'packages/board/board_ESP32_Atom-Lite.yaml'
# - path: 'packages/board/board_ESP32_EVB.yaml'
# - path: 'packages/board/board_ESP32_LilyGo-T-CAN485.yaml'
# - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
# - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
# - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
# - path: 'packages/board/board_ESP32-S3_DevKitC-1_LED-38.yaml'
# - path: 'packages/board/board_ESP32-S3_DevKitC-1_LED-48.yaml'
# - path: 'packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml'
# - path: 'packages/board/board_ESP32-S3_Touch-LCD-4.3.yaml'
# - path: 'packages/board/board_ESP32-S3_Touch-LCD-7.yaml'
# - path: 'packages/board/board_ESP32-S3_XIAO.yaml'
# - path: 'packages/board/board_ESP32-S3_YBoard.yaml'
# - path: 'packages/board/board_ESP32-S3_AtomS3.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
# - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml'
# vars:
# display_auto_next_page_interval: '5s'
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
# LilyGo T-Connect Pro
# Importing the display also activates PSRAM.
# Also note that the display update takes about 120 ms, as indicated in the logs:
# "Component display took a long time for an operation (124 ms)."
# Board
# - path: 'packages/board/board_ESP32-S3_LilyGo-T-Connect-Pro.yaml'
# Display
# - path: 'packages/board/board_options_display_480x222.yaml'
# vars:
# display_auto_next_page_interval: '5s'
########### >>> UNCOMMENT YOUR BOARD OPTIONS <<< ###########
board_options:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
# UART 1
- path: 'packages/board/board_options_itf_uart_esp_1.yaml'
# UART 2
- path: 'packages/board/board_options_itf_uart_esp_2.yaml'
# UART 3
- path: 'packages/board/board_options_itf_uart_esp_3.yaml'
# ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit)
- path: 'packages/board/board_options_itf_canbus_esp32_can.yaml'
vars:
canbus_node_id: 'canbus_inverter_1'
# MCP2515
# - path: 'packages/board/board_options_itf_canbus_mcp2515.yaml'
# vars:
# canbus_node_id: 'canbus_inverter_1'
############################################################
# You don't have to import a shunt but you must import at least one BMS.
# UART Shunt
# shunt:
# url: https://github.com/Sleeper85/esphome-yambms
# ref: main
# refresh: 0s
# files:
# # Shunt 1
# - path: 'packages/shunt/shunt_combine_Victron_SmartShunt_UART.yaml' # shunt_combine_Junctek_KHF_UART.yaml
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_uart_id: 'uart_esp_3'
# BLE Shunt
# shunt:
# url: https://github.com/Sleeper85/esphome-yambms
# ref: main
# refresh: 0s
# files:
# # Shunt 1
# - path: 'packages/shunt/shunt_combine_Victron_SmartShunt_BLE.yaml'
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_mac_address: '60:A4:23:91:8F:55' # Your MAC address
# shunt_encryption_key: '0df4d0395b7d1a876c0c33ecb9e70dcd' # Your encryption key
bms:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
# BMS 1
- path: 'packages/bms/bms_combine_JK_UART_4G-GPS_full.yaml'
vars:
bms_id: '1' # must be a number
bms_name: 'JK-BMS 1'
bms_uart_id: 'uart_esp_1'
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
# BMS 2
- path: 'packages/bms/bms_combine_JK_UART_4G-GPS_full.yaml'
vars:
bms_id: '2' # must be a number
bms_name: 'JK-BMS 2'
bms_uart_id: 'uart_esp_2'
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
# bms_options:
# url: https://github.com/Sleeper85/esphome-yambms
# ref: main
# refresh: 0s
# files:
# # BMS 1
# - path: 'packages/bms/bms_options_charging_logic.yaml'
# vars:
# bms_id: '1' # must be a number
# # BMS 2
# - path: 'packages/bms/bms_options_charging_logic.yaml'
# vars:
# bms_id: '2' # must be a number
yambms:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: 'packages/yambms/yambms.yaml'
canbus:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: 'packages/yambms/yambms_canbus.yaml'
vars:
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_inverter_1'
canbus_light_id: 'esp_light'
# The CANBUS link will be considered down if no response from the inverter (0x305 frame) for 5s
# The Deye inverter sends the ACK 0x305 only when it receives the 0x356 frame.
canbus_link_timer: '5s'
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |
# +--------------------------------------+
debug:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
- path: packages/base/device_debug_ESP32.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'
@@ -0,0 +1,63 @@
# Updated : 2025.04.01
# Version : 1.5.5
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
############################ Local Packages Example ############################
# This is not a working YAML but just code ready to copy into your main YAML.
################################################################################
packages:
bms1: !include
file: packages/bms/bms_combine_JBD_UART_full.yaml
vars:
bms_id: '1' # must be a number
bms_name: 'BMS 1'
bms_uart_id: 'uart_esp_1'
bms_rx_timeout: '150ms'
# Required settings cannot be retrieved from BMS
# These values ​​must match your BMS settings
# LFP values example
bms_max_charge_current: '100' # A. Used to calculate maximum charge current
bms_max_discharge_current: '100' # A. Used to calculate maximum discharge current
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
bms2: !include
file: packages/bms/bms_combine_JBD_BLE_full.yaml
vars:
bms_id: '2' # must be a number
bms_name: 'BMS 2'
bms_ble_mac_address: 'C8:47:8C:10:7E:AA' # Your MAC address
# Required settings cannot be retrieved from BMS
# These values ​​must match your BMS settings
# LFP values example
bms_max_charge_current: '100' # A. Used to calculate maximum charge current
bms_max_discharge_current: '100' # A. Used to calculate maximum discharge current
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
@@ -0,0 +1,48 @@
# Updated : 2025.04.01
# Version : 1.5.5
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
############################ Local Packages Example ############################
# This is not a working YAML but just code ready to copy into your main YAML.
################################################################################
packages:
bms1: !include
file: packages/bms/bms_combine_JK_BLE_standard.yaml
vars:
bms_id: '1' # must be a number
bms_name: 'JK-BMS 1'
bms_ble_protocol_version: 'JK02_32S' # JK02_24S < hardware version 11.0 >= JK02_32S
bms_ble_mac_address: 'C8:47:8C:10:7E:AA'
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
bms2: !include
file: packages/bms/bms_combine_JK_BLE_standard.yaml
vars:
bms_id: '2' # must be a number
bms_name: 'JK-BMS 2'
bms_ble_protocol_version: 'JK02_32S' # JK02_24S < hardware version 11.0 >= JK02_32S
bms_ble_mac_address: 'C8:47:8C:EE:16:EA'
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
@@ -0,0 +1,125 @@
# Updated : 2025.06.10
# Version : 1.5.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
############################ Local Packages Example ############################
# This is not a working YAML but just code ready to copy into your main YAML.
################################################################################
packages:
# The sniffer represents the ESP node connected to the JK-BMS PB RS485 bus
# If address 0x00 is not detected on the RS485 bus, the sniffer will act directly as a master BMS (mode 2, max 15 BMS)
# sniffer1: !include
# file: packages/bms/bms_combine_JK_RS485_Modbus_sniffer_talk_pin.yaml
# vars:
# sniffer_id: 'sniffer1'
# sniffer_protocol: 'JK02_32S'
# sniffer_uart_id: 'uart_esp_1'
# sniffer_talk_pin: 8 # ESP32: 4, ESP32-S3: 8, ESP32-C3: 10
sniffer1: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_sniffer.yaml
vars:
sniffer_id: 'sniffer1'
sniffer_protocol: 'JK02_32S'
sniffer_uart_id: 'uart_esp_1'
# Mode2 : configure the DIP switches of your BMS from 0x01 to 0x0F (don't use the 0x00 address, maximum 15 BMS)
bms1: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '1' # must be a number
bms_name: 'JK-BMS 1'
bms_address: '0x01' # BMS 1 DIP switch
bms2: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '2' # must be a number
bms_name: 'JK-BMS 2'
bms_address: '0x02' # BMS 2 DIP switch
bms3: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '3' # must be a number
bms_name: 'JK-BMS 3'
bms_address: '0x03' # BMS 3 DIP switch
bms4: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '4' # must be a number
bms_name: 'JK-BMS 4'
bms_address: '0x04' # BMS 4 DIP switch
bms5: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '5' # must be a number
bms_name: 'JK-BMS 5'
bms_address: '0x05' # BMS 5 DIP switch
bms6: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '6' # must be a number
bms_name: 'JK-BMS 6'
bms_address: '0x06' # BMS 6 DIP switch
bms7: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '7' # must be a number
bms_name: 'JK-BMS 7'
bms_address: '0x07' # BMS 7 DIP switch
bms8: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '8' # must be a number
bms_name: 'JK-BMS 8'
bms_address: '0x08' # BMS 8 DIP switch
@@ -0,0 +1,46 @@
# Updated : 2025.04.01
# Version : 1.5.5
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
############################ Local Packages Example ############################
# This is not a working YAML but just code ready to copy into your main YAML.
################################################################################
packages:
bms1: !include
file: packages/bms/bms_combine_JK_UART_4G-GPS_full.yaml
vars:
bms_id: '1' # must be a number
bms_name: 'JK-BMS 1'
bms_uart_id: 'uart_esp_1'
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
bms2: !include
file: packages/bms/bms_combine_JK_UART_4G-GPS_full.yaml
vars:
bms_id: '2' # must be a number
bms_name: 'JK-BMS 2'
bms_uart_id: 'uart_esp_2'
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
@@ -0,0 +1,73 @@
# Updated : 2025.06.10
# Version : 1.5.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
############################ Local Packages Example ############################
# This is not a working YAML but just code ready to copy into your main YAML.
################################################################################
packages:
seplos_modbus1: !include
file: packages/bms/bms_combine_SEPLOS_V1_V2_RS485_modbus.yaml
vars:
seplos_modbus_id: 'seplos_modbus1'
seplos_modbus_uart_id: 'uart_esp_1'
seplos_modbus_baud_rate: '9600' # 9600 / 19200 ; please set the baudrate of your Seplos BMS model here
seplos_modbus_rx_timeout: '150ms'
bms1: !include
file: packages/bms/bms_combine_SEPLOS_V1_V2_RS485_bms_full.yaml
vars:
# Seplos modbus ID
seplos_modbus_id: 'seplos_modbus1'
# BMS vars
bms_id: '1' # must be a number
bms_name: 'BMS 1'
bms_address: '0x01' # BMS 1 DIP switch
bms_protocol_version: '0x20' # Known protocol versions: 0x20 (Seplos), 0x26 (Boqiang)
# Required settings cannot be retrieved from BMS
# These values ​​must match your BMS settings
# LFP values example
bms_max_charge_current: '100' # A. Used to calculate maximum charge current
bms_max_discharge_current: '100' # A. Used to calculate maximum discharge current
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
bms2: !include
file: packages/bms/bms_combine_SEPLOS_V1_V2_RS485_bms_full.yaml
vars:
# Seplos modbus ID
seplos_modbus_id: 'seplos_modbus1'
# BMS vars
bms_id: '2' # must be a number
bms_name: 'BMS 2'
bms_address: '0x02' # BMS 2 DIP switch
bms_protocol_version: '0x20' # Known protocol versions: 0x20 (Seplos), 0x26 (Boqiang)
bms_uart_id: uart_esp_2
# Required settings cannot be retrieved from BMS
# These values ​​must match your BMS settings
# LFP values example
bms_max_charge_current: '100' # A. Used to calculate maximum charge current
bms_max_discharge_current: '100' # A. Used to calculate maximum discharge current
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
@@ -0,0 +1,104 @@
# Updated : 2025.06.10
# Version : 1.5.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
############################ Local Packages Example ############################
# This is not a working YAML but just code ready to copy into your main YAML.
################################################################################
substitutions:
modbus_update_interval: '5s' # frequency with which BMS/Shunt modbus servers are queried
modbus_baud_rate: '19200' # 9600 / 19200 / 115200
modbus_command_throttle: '0ms' # minimum time in between 2 requests to the device
modbus_send_wait_time: '250ms' # time in milliseconds before the next ModBUS command is sent if an answer from a previous command is pending
packages:
modbus: !include
file: packages/base/device_modbus.yaml
vars:
modbus_role: 'client' # client / server
modbus_uart_id: 'uart_esp_1' # RS485 board
shunt1: !include
file: packages/shunt/shunt_combine_modbus_client.yaml
vars:
shunt_id: '1' # must be a number
shunt_name: 'Shunt 1'
bms1: !include
file: packages/bms/bms_combine_modbus_client.yaml
vars:
bms_id: '1' # must be a number
bms_name: 'BMS 1'
bms2: !include
file: packages/bms/bms_combine_modbus_client.yaml
vars:
bms_id: '2' # must be a number
bms_name: 'BMS 2'
bms3: !include
file: packages/bms/bms_combine_modbus_client.yaml
vars:
bms_id: '3' # must be a number
bms_name: 'BMS 3'
# bms4: !include
# file: packages/bms/bms_combine_modbus_client.yaml
# vars:
# bms_id: '4' # must be a number
# bms_name: 'BMS 4'
# bms5: !include
# file: packages/bms/bms_combine_modbus_client.yaml
# vars:
# bms_id: '5' # must be a number
# bms_name: 'BMS 5'
# bms6: !include
# file: packages/bms/bms_combine_modbus_client.yaml
# vars:
# bms_id: '6' # must be a number
# bms_name: 'BMS 6'
# bms7: !include
# file: packages/bms/bms_combine_modbus_client.yaml
# vars:
# bms_id: '7' # must be a number
# bms_name: 'BMS 7'
# bms8: !include
# file: packages/bms/bms_combine_modbus_client.yaml
# vars:
# bms_id: '8' # must be a number
# bms_name: 'BMS 8'
# bms9: !include
# file: packages/bms/bms_combine_modbus_client.yaml
# vars:
# bms_id: '9' # must be a number
# bms_name: 'BMS 9'
# bms10: !include
# file: packages/bms/bms_combine_modbus_client.yaml
# vars:
# bms_id: '10' # must be a number
# bms_name: 'BMS 10'
@@ -0,0 +1,55 @@
# Updated : 2025.06.10
# Version : 1.5.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
############################ Local Packages Example ############################
# This is not a working YAML but just code ready to copy into your main YAML.
################################################################################
substitutions:
modbus_update_interval: '5s' # frequency with which BMS/Shunt modbus servers are queried
modbus_baud_rate: '19200' # 9600 / 19200 / 115200
modbus_command_throttle: '0ms' # minimum time in between 2 requests to the device
modbus_send_wait_time: '250ms' # time in milliseconds before the next ModBUS command is sent if an answer from a previous command is pending
packages:
modbus: !include
file: packages/base/device_modbus.yaml
vars:
modbus_role: 'server' # client / server
modbus_uart_id: 'uart_esp_1' # RS485 board
shunt1: !include
file: packages/shunt/shunt_modbus_Victron_SmartShunt_UART.yaml
vars:
shunt_id: '1' # must be a number
shunt_name: 'Shunt 1'
shunt_uart_id: 'uart_esp_2'
bms1: !include
file: packages/bms/bms_modbus_JK_UART_4G-GPS_full.yaml
vars:
bms_id: '1' # must be a number
bms_name: 'JK-BMS 1'
bms_uart_id: 'uart_esp_3'
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
@@ -0,0 +1,60 @@
# Updated : 2025.06.10
# Version : 1.5.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
############################ Local Packages Example ############################
# This is not a working YAML but just code ready to copy into your main YAML.
################################################################################
substitutions:
modbus_update_interval: '5s' # frequency with which BMS/Shunt modbus servers are queried
modbus_baud_rate: '19200' # 9600 / 19200 / 115200
modbus_command_throttle: '0ms' # minimum time in between 2 requests to the device
modbus_send_wait_time: '250ms' # time in milliseconds before the next ModBUS command is sent if an answer from a previous command is pending
packages:
modbus: !include
file: packages/base/device_modbus.yaml
vars:
modbus_role: 'server' # client / server
modbus_uart_id: 'uart_esp_1' # RS485 board
bms2: !include
file: packages/bms/bms_modbus_JK_BLE_standard.yaml
vars:
bms_id: '2' # must be a number, also represents the modbus server number !
bms_name: 'JK-BMS 2'
bms_ble_protocol_version: JK02_32S # JK02_24S < hardware version 11.0 >= JK02_32S
bms_ble_mac_address: C8:47:8C:10:7E:AA
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
bms3: !include
file: packages/bms/bms_modbus_JK_BLE_standard.yaml
vars:
bms_id: '3' # must be a number, also represents the modbus server number !
bms_name: 'JK-BMS 3'
bms_ble_protocol_version: JK02_32S # JK02_24S < hardware version 11.0 >= JK02_32S
bms_ble_mac_address: C8:47:8C:EE:16:EA
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
@@ -0,0 +1,67 @@
# Updated : 2025.04.01
# Version : 1.5.5
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
############################ Remote Packages Example ###########################
# This is not a working YAML but just code ready to copy into your main YAML.
################################################################################
packages:
bms:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
# BMS 1
- path: 'packages/bms/bms_combine_JBD_UART_full.yaml'
vars:
bms_id: '1' # must be a number
bms_name: 'BMS 1'
bms_uart_id: 'uart_esp_1'
bms_rx_timeout: '150ms'
# Required settings cannot be retrieved from BMS
# These values ​​must match your BMS settings
# LFP values example
bms_max_charge_current: '100' # A. Used to calculate maximum charge current
bms_max_discharge_current: '100' # A. Used to calculate maximum discharge current
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
# BMS 2
- path: 'packages/bms/bms_combine_JBD_BLE_full.yaml'
vars:
bms_id: '2' # must be a number
bms_name: 'BMS 2'
bms_ble_mac_address: 'C8:47:8C:10:7E:AA' # Your MAC address
# Required settings cannot be retrieved from BMS
# These values ​​must match your BMS settings
# LFP values example
bms_max_charge_current: '100' # A. Used to calculate maximum charge current
bms_max_discharge_current: '100' # A. Used to calculate maximum discharge current
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
@@ -0,0 +1,52 @@
# Updated : 2025.04.01
# Version : 1.5.5
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
############################ Remote Packages Example ###########################
# This is not a working YAML but just code ready to copy into your main YAML.
################################################################################
packages:
bms:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
# BMS 1
- path: 'packages/bms/bms_combine_JK_BLE_standard.yaml'
vars:
bms_id: '1' # must be a number
bms_name: 'JK-BMS 1'
bms_ble_protocol_version: 'JK02_32S' # JK02_24S < hardware version 11.0 >= JK02_32S
bms_ble_mac_address: 'C8:47:8C:10:7E:AA'
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
# BMS 2
- path: 'packages/bms/bms_combine_JK_BLE_standard.yaml'
vars:
bms_id: '2' # must be a number
bms_name: 'JK-BMS 2'
bms_ble_protocol_version: 'JK02_32S' # JK02_24S < hardware version 11.0 >= JK02_32S
bms_ble_mac_address: 'C8:47:8C:EE:16:EA'
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
@@ -0,0 +1,113 @@
# Updated : 2025.04.01
# Version : 1.5.5
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
############################ Remote Packages Example ###########################
# This is not a working YAML but just code ready to copy into your main YAML.
################################################################################
packages:
# The sniffer represents the ESP node connected to the JK-BMS PB RS485 bus
# If address 0x00 is not detected on the RS485 bus, the sniffer will act directly as a master BMS (mode 2, max 15 BMS)
bms:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
# RS485 Sniffer
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_sniffer.yaml'
vars:
sniffer_id: 'sniffer1'
sniffer_protocol: 'JK02_32S'
sniffer_uart_id: 'uart_esp_1'
# BMS 1
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml'
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '1' # must be a number
bms_name: 'JK-BMS 1'
bms_address: '0x01' # BMS 1 DIP switch
# BMS 2
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml'
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '2' # must be a number
bms_name: 'JK-BMS 2'
bms_address: '0x02' # BMS 2 DIP switch
# BMS 3
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml'
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '3' # must be a number
bms_name: 'JK-BMS 3'
bms_address: '0x03' # BMS 3 DIP switch
# BMS 4
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml'
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '4' # must be a number
bms_name: 'JK-BMS 4'
bms_address: '0x04' # BMS 4 DIP switch
# BMS 5
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml'
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '5' # must be a number
bms_name: 'JK-BMS 5'
bms_address: '0x05' # BMS 5 DIP switch
# BMS 6
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml'
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '6' # must be a number
bms_name: 'JK-BMS 6'
bms_address: '0x06' # BMS 6 DIP switch
# BMS 7
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml'
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '7' # must be a number
bms_name: 'JK-BMS 7'
bms_address: '0x07' # BMS 7 DIP switch
# BMS 8
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml'
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '8' # must be a number
bms_name: 'JK-BMS 8'
bms_address: '0x08' # BMS 8 DIP switch
@@ -0,0 +1,50 @@
# Updated : 2025.04.01
# Version : 1.5.5
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
############################ Remote Packages Example ###########################
# This is not a working YAML but just code ready to copy into your main YAML.
################################################################################
packages:
bms:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
# BMS 1
- path: 'packages/bms/bms_combine_JK_UART_4G-GPS_full.yaml'
vars:
bms_id: '1' # must be a number
bms_name: 'JK-BMS 1'
bms_uart_id: 'uart_esp_1'
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
# BMS 2
- path: 'packages/bms/bms_combine_JK_UART_4G-GPS_full.yaml'
vars:
bms_id: '2' # must be a number
bms_name: 'JK-BMS 2'
bms_uart_id: 'uart_esp_2'
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
@@ -0,0 +1,76 @@
# Updated : 2025.04.01
# Version : 1.5.5
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
############################ Remote Packages Example ###########################
# This is not a working YAML but just code ready to copy into your main YAML.
################################################################################
packages:
bms:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
# Seplos Modbus 1
- path: 'packages/bms/bms_combine_SEPLOS_V1_V2_RS485_modbus.yaml'
vars:
seplos_modbus_id: 'seplos_modbus1'
seplos_modbus_uart_id: 'uart_esp_1'
seplos_modbus_baud_rate: '9600' # 9600 / 19200 ; please set the baudrate of your Seplos BMS model here
seplos_modbus_rx_timeout: '150ms'
# BMS 1
- path: 'packages/bms/bms_combine_SEPLOS_V1_V2_RS485_bms_full.yaml'
vars:
# Seplos modbus ID
seplos_modbus_id: 'seplos_modbus1'
# BMS vars
bms_id: '1' # must be a number
bms_name: 'BMS 1'
bms_address: '0x01' # BMS 1 DIP switch
bms_protocol_version: '0x20' # Known protocol versions: 0x20 (Seplos), 0x26 (Boqiang)
# Required settings cannot be retrieved from BMS
# These values ​​must match your BMS settings
# LFP values example
bms_max_charge_current: '100' # A. Used to calculate maximum charge current
bms_max_discharge_current: '100' # A. Used to calculate maximum discharge current
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
# BMS 2
- path: 'packages/bms/bms_combine_SEPLOS_V1_V2_RS485_bms_full.yaml'
vars:
# Seplos modbus ID
seplos_modbus_id: 'seplos_modbus1'
# BMS vars
bms_id: '2' # must be a number
bms_name: 'BMS 2'
bms_address: '0x02' # BMS 2 DIP switch
bms_protocol_version: '0x20' # Known protocol versions: 0x20 (Seplos), 0x26 (Boqiang)
bms_uart_id: uart_esp_2
# Required settings cannot be retrieved from BMS
# These values ​​must match your BMS settings
# LFP values example
bms_max_charge_current: '100' # A. Used to calculate maximum charge current
bms_max_discharge_current: '100' # A. Used to calculate maximum discharge current
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
@@ -0,0 +1,98 @@
# Updated : 2025.06.10
# Version : 1.5.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
############################ Remote Packages Example ###########################
# This is not a working YAML but just code ready to copy into your main YAML.
################################################################################
substitutions:
modbus_update_interval: '5s' # frequency with which BMS/Shunt modbus servers are queried
modbus_baud_rate: '19200' # 9600 / 19200 / 115200
modbus_command_throttle: '0ms' # minimum time in between 2 requests to the device
modbus_send_wait_time: '250ms' # time in milliseconds before the next ModBUS command is sent if an answer from a previous command is pending
packages:
yambms_modbus_client:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
# Modbus client
- path: 'packages/base/device_modbus.yaml'
vars:
modbus_role: 'client' # client / server
modbus_uart_id: 'uart_esp_1' # RS485 board
# Shunt 1
- path: 'packages/shunt/shunt_combine_modbus_client.yaml'
vars:
shunt_id: '1' # must be a number
shunt_name: 'Shunt 1'
# BMS 1
- path: 'packages/bms/bms_combine_modbus_client.yaml'
vars:
bms_id: '1' # must be a number
bms_name: 'BMS 1'
# BMS 2
- path: 'packages/bms/bms_combine_modbus_client.yaml'
vars:
bms_id: '2' # must be a number
bms_name: 'BMS 2'
# BMS 3
- path: 'packages/bms/bms_combine_modbus_client.yaml'
vars:
bms_id: '3' # must be a number
bms_name: 'BMS 3'
# # BMS 4
# - path: 'packages/bms/bms_combine_modbus_client.yaml'
# vars:
# bms_id: '4' # must be a number
# bms_name: 'BMS 4'
# # BMS 5
# - path: 'packages/bms/bms_combine_modbus_client.yaml'
# vars:
# bms_id: '5' # must be a number
# bms_name: 'BMS 5'
# # BMS 6
# - path: 'packages/bms/bms_combine_modbus_client.yaml'
# vars:
# bms_id: '6' # must be a number
# bms_name: 'BMS 6'
# # BMS 7
# - path: 'packages/bms/bms_combine_modbus_client.yaml'
# vars:
# bms_id: '7' # must be a number
# bms_name: 'BMS 7'
# # BMS 8
# - path: 'packages/bms/bms_combine_modbus_client.yaml'
# vars:
# bms_id: '8' # must be a number
# bms_name: 'BMS 8'
# # BMS 9
# - path: 'packages/bms/bms_combine_modbus_client.yaml'
# vars:
# bms_id: '9' # must be a number
# bms_name: 'BMS 9'
# # BMS 10
# - path: 'packages/bms/bms_combine_modbus_client.yaml'
# vars:
# bms_id: '10' # must be a number
# bms_name: 'BMS 10'
@@ -0,0 +1,58 @@
# Updated : 2025.06.10
# Version : 1.5.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
############################ Remote Packages Example ###########################
# This is not a working YAML but just code ready to copy into your main YAML.
################################################################################
substitutions:
modbus_update_interval: '5s' # frequency with which BMS/Shunt modbus servers are queried
modbus_baud_rate: '19200' # 9600 / 19200 / 115200
modbus_command_throttle: '0ms' # minimum time in between 2 requests to the device
modbus_send_wait_time: '250ms' # time in milliseconds before the next ModBUS command is sent if an answer from a previous command is pending
packages:
yambms_modbus_server:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
# Modbus server
- path: 'packages/base/device_modbus.yaml'
vars:
modbus_role: 'server' # client / server
modbus_uart_id: 'uart_esp_1' # RS485 board
# Shunt 1
- path: 'packages/shunt/shunt_modbus_Victron_SmartShunt_UART.yaml'
vars:
shunt_id: '1' # must be a number
shunt_name: 'Shunt 1'
shunt_uart_id: 'uart_esp_2'
# BMS 1
- path: 'packages/bms/bms_modbus_JK_UART_4G-GPS_full.yaml'
vars:
bms_id: '1' # must be a number
bms_name: 'JK-BMS 1'
bms_uart_id: 'uart_esp_3'
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
@@ -0,0 +1,63 @@
# Updated : 2025.06.10
# Version : 1.5.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
############################ Remote Packages Example ###########################
# This is not a working YAML but just code ready to copy into your main YAML.
################################################################################
substitutions:
modbus_update_interval: '5s' # frequency with which BMS/Shunt modbus servers are queried
modbus_baud_rate: '19200' # 9600 / 19200 / 115200
modbus_command_throttle: '0ms' # minimum time in between 2 requests to the device
modbus_send_wait_time: '250ms' # time in milliseconds before the next ModBUS command is sent if an answer from a previous command is pending
packages:
yambms_modbus_server:
url: https://github.com/Sleeper85/esphome-yambms
ref: main
refresh: 0s
files:
# Modbus server
- path: 'packages/base/device_modbus.yaml'
vars:
modbus_role: 'server' # client / server
modbus_uart_id: 'uart_esp_1' # RS485 board
# BMS 2
- path: 'packages/bms/bms_modbus_JK_BLE_standard.yaml'
vars:
bms_id: '2' # must be a number, also represents the modbus server number !
bms_name: 'JK-BMS 2'
bms_ble_protocol_version: JK02_32S # JK02_24S < hardware version 11.0 >= JK02_32S
bms_ble_mac_address: C8:47:8C:10:7E:AA
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
# BMS 3
- path: 'packages/bms/bms_modbus_JK_BLE_standard.yaml'
vars:
bms_id: '3' # must be a number, also represents the modbus server number !
bms_name: 'JK-BMS 3'
bms_ble_protocol_version: JK02_32S # JK02_24S < hardware version 11.0 >= JK02_32S
bms_ble_mac_address: C8:47:8C:EE:16:EA
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
@@ -1,4 +1,4 @@
# YamBMS - JK-B BMS UART Solution
# YamBMS - JK-B BMS
[![Badge License: GPLv3](https://img.shields.io/badge/License-GPLv3-brightgreen.svg)](https://www.gnu.org/licenses/gpl-3.0)
[![Badge Version](https://img.shields.io/github/v/release/Sleeper85/esphome-yambms?include_prereleases&color=yellow&logo=DocuSign&logoColor=white)](https://github.com/Sleeper85/esphome-yambms/releases/latest)
@@ -6,9 +6,46 @@
![GitHub forks](https://img.shields.io/github/forks/Sleeper85/esphome-yambms)
![GitHub watchers](https://img.shields.io/github/watchers/Sleeper85/esphome-yambms)
## External component
> [!IMPORTANT]
> The most important thing for proper functioning of YamBMS is that **the voltage of your BMS is well calibrated**.
> YamBMS logic is based on the `min_cell_voltage` and `max_cell_voltage` voltages of your BMS.
[esphome-jk-bms](https://github.com/syssi/esphome-jk-bms) by [@syssi](https://github.com/syssi)
## JK-B BMS overview
### UART1 (GPS) port
The `GPS` port sometimes called `RS485` is not an `RS485` port but `3V3 UART-TTL` port.
```
# UART-TTL GPS port on JK-BMS (4 pin, JST 1.25mm pitch)
┌─── ─────── ────┐
│ │
│ O O O O │
│GND RX TX VBAT│
└────────────────┘
│ │ │ └ VBAT is full battery voltage eg. 56V (possible to use it via an isolated DC-DC converter)
│ │ └──── TX to TTL-isolator AI (input)
│ └──────── RX to TTL-isolator AO (output)
└──────────── GND to TTL-isolator GND
```
The `UART1` (labeled as `GPS`) socket of the BMS can be attached to any UART pins of the ESP32.<br>
A hardware UART should be preferred because of the high baudrate (115200 baud).<br>
The connector is called 4 pin JST with 1.25mm pitch.
![Image](../../images/JK-BMS_24S_GPS_port.png "JK-B BMS GPS port")
## JK-B BMS protocol
Historically it was not possible to change the protocol of the `UART1 (GPS)` port and the protocol used was `4G-GPS Remote module Common protocol V4.2` with the component [esphome-jk-bms](https://github.com/syssi/esphome-jk-bms) of [@syssi](https://github.com/syssi).
If you cannot change the protocol of the `UART1 (GPS)` port you can only monitor one BMS per UART port of the ESP32, so a maximum of `3x BMS` without adding a UART expander.
If you have a recent BMS, it is now possible to change the protocol of the `UART1 (GPS)` port and with the `JK BMS RS485 Modbus V1.0` protocol you can assign an address (via JK app) to your BMS and monitor several of them from a single `UART-RS485` connection in the same way as the [JK-PB](BMS_JK-PB.md). To use this protocol and monitor all your BMS on a single `RS485 bus` you will need to add the `UART to RS485 adapter` sold by JK or another RS485 board of your choice.
<img src="../../images/BMS_JK_RS485_Modbus_protocol.png" width="600">
![Image](../../images/BMS_JK_RS485_adapter.png "JK RS485 adapter")
## Schematic and setup instructions
@@ -32,8 +69,8 @@ You need to import this YAML into the main YAML.
```
UART-TTL RS232-TTL CAN BUS
┌──────────┐ ┌──────────┐ ┌────────────┐ ┌──────────┐
│ │<TX------RX>│2 5│<TX-------TX>| | | |
│ JK-BMS │<RX------TX>│1 6│<RX-------RX>| CA-IS3050G |<---CAN H --->| Inverter |
│ │<TX------RX>│1 5│<TX-------TX>| | | |
│ JK-BMS │<RX------TX>│2 6│<RX-------RX>| CA-IS3050G |<---CAN H --->| Inverter |
│ │<----GND--->│ ESP32 │ | CAN |<---CAN L --->| |
│ │ 5V---->│5V 3V3| | | | |
└──────────┘ └──────────┘ └────────────┘ └──────────┘
@@ -51,8 +88,8 @@ You need to import this YAML into the main YAML.
```
UART-TTL RS232-TTL CAN BUS
┌──────────┐ ┌──────────┐ ┌────────────┐ ┌──────────┐
│ │<TX------RX>│26 22│<TX-------TX>| | | |
│ JK-BMS │<RX------TX>│32 19│<RX-------RX>| CA-IS3050G |<---CAN H --->| Inverter |
│ │<TX------RX>│32 22│<TX-------TX>| | | |
│ JK-BMS │<RX------TX>│26 19│<RX-------RX>| CA-IS3050G |<---CAN H --->| Inverter |
│ │<----GND--->│ ESP32 │ | CAN |<---CAN L --->| |
│ │ 5V---->│5V 3V3| | | | |
└──────────┘ └──────────┘ └────────────┘ └──────────┘
@@ -105,25 +142,3 @@ You need to import this YAML into the main YAML.
```
### JK-B BMS UART-TTL GPS port
The `GPS` port sometimes called `RS485` is not an `RS485` port but `3V3 UART-TTL`.
```
# UART-TTL GPS port on JK-BMS (4 pin, JST 1.25mm pitch)
┌─── ─────── ────┐
│ │
│ O O O O │
│GND RX TX VBAT│
└────────────────┘
│ │ │ └ VBAT is full battery volatge eg 51.2V (possible to use it via an isolated DC-DC converter)
│ │ └──── TX to TTL-isolator AI (input)
│ └──────── RX to TTL-isolator AO (output)
└──────────── GND to TTL-isolator GND
```
The UART-TTL (labeled as `GPS`) socket of the BMS can be attached to any UART pins of the ESP.<br>
A hardware UART should be preferred because of the high baudrate (115200 baud).<br>
The connector is called 4 pin JST with 1.25mm pitch.
![Image](../../images/JK-BMS_24S_GPS_port.png "JK-B BMS GPS port")
@@ -1,4 +1,4 @@
# YamBMS - JK-PB BMS RS485 Solution
# YamBMS - JK-PB Inverter BMS
[![Badge License: GPLv3](https://img.shields.io/badge/License-GPLv3-brightgreen.svg)](https://www.gnu.org/licenses/gpl-3.0)
[![Badge Version](https://img.shields.io/github/v/release/Sleeper85/esphome-yambms?include_prereleases&color=yellow&logo=DocuSign&logoColor=white)](https://github.com/Sleeper85/esphome-yambms/releases/latest)
@@ -6,11 +6,81 @@
![GitHub forks](https://img.shields.io/github/forks/Sleeper85/esphome-yambms)
![GitHub watchers](https://img.shields.io/github/watchers/Sleeper85/esphome-yambms)
## External component
> [!IMPORTANT]
> The most important thing for proper functioning of YamBMS is that **the voltage of your BMS is well calibrated**.
> YamBMS logic is based on the `min_cell_voltage` and `max_cell_voltage` voltages of your BMS.
> If you use YamBMS, the internal charging logic of the `JK-PB BMS` will not be used.
[JK_RS485](https://github.com/txubelaxu/esphome-jk-bms/blob/main/components/jk_rs485_bms/README.md) by [@txubelaxu](https://github.com/txubelaxu)
## JK-PB BMS overview
## Hardware
|![Image](../../images/BMS_JK-PB_Inverter_BMS.png)|
|-|
|![Image](../../images/BMS_JK-PB_communication_connectors.jpg)|
|![Image](../../images/BMS_JK-PB_communication_board.png)|
## JK-PB BMS protocol
The datas from this BMS can be retrieved from the `RS485-2 (UART2)` network using the component [JK_RS485](https://github.com/txubelaxu/esphome-jk-bms/blob/main/components/jk_rs485_bms/README.md) of [@txubelaxu](https://github.com/txubelaxu).
The BMS DIP switches must be set from `1` to `15` (server mode) and connected to each other using the `RS485-2` network available on the **two ports at the right ends**. `YamBMS` also connects to one of these two ports.
### **UART2 configuration**
> [!NOTE]
> The protocol of the `UART2` port is not selectable from the JK application.
> It is automatically set based on the address (DIP switch) of the BMS.
In the last software version only two protocols are available on the **RS485-2 (UART2)** ports:
- **001** - JK BMS RS485 Modbus V1.0 **(DIP switch 1 to 15)**
- **015** - UART Protocol 015 **(DIP switch 0)**
### **UART1 configuration**
The following protocols are supported on the **RS485-1 (UART1)** port:
(*italic options ane not settable*)
- **000** - 4G-GPS Remote module Common protocol V4.2
- **001** - **JK BMS RS485 Modbus V1.0**
- **002** - NIU U SERIES
- **003** - China tower shared battery cabinet V1.1
- **004** - PACE_RS485_Modbus_V1.3
- **005** - PYLON_low_voltage_Protocol_RS485_V3.5
- **006** - Growatt_BMS_RS485_Protocol_1xSxxP_ESS_Rev2.01
- **007** - Voltronic_Inverter_and_BMS_485_communication_protocol_20200...
- **008** - China tower shared battery cabinet V2.0
- **009** - WOW_RS485_Modbus_V1.3
- **010** - JK BMS LCD Protocol V2.0
- **011** - *UART1 User customization*
- **012** - *UART2 User customization*
- **013** - (9600)JK BMS RS485 Modbus V1.0
- **014** - (9600)PYLON_low_voltage_Protocol_RS485_V3.5
- **015** - *UART Protocol 015*
### **CAN port configuration**
The following CAN protocols are supported on the CAN port:
(*italic options ane not settable*)
- **000** - JK BMS CAN Protocol (250K) V2.0
- **001** - Deye Low-voltage hybrid inverter CAN communication protocol V1.0
- **002** - PYLON-Low-voltage-V1.2
- **003** - Growatt BMS CAN-Bus-protocol-low-voltage_Rev_05
- **004** - Victron_CANbus_BMS_protocol_20170717
- **005** - MEGAREVO_Hybird_BMSCAN_Protocol_V1.0
- **006** - JK BMS CAN Protocol (500K) V2.0
- **007** - INVT BMS CAN Bus protocol V1.02
- **008** - GoodWe LV BMS Protocol (EX/EM/S-BP/BP)
- **009** - FSS-ConnectingBat-Tl-en-10 | Version 1.0
- **010** - MUST PV1800F-CAN communication Protocol1.04.04
- **011** - LuxpowerTek Battery CAN protocol V01
- **012** - *CAN BUS User customization*
- **013** - *CAN BUS Protocol 013*
- **014** - *CAN BUS Protocol 014*
## YamBMS hardware
> [!TIP]
> This solution only requires an ESP32 with a CAN transceiver and a RS485 transceiver.
@@ -1,4 +1,4 @@
# YamBMS - JK-B BMS RS485 DISPLAY Solution
# YamBMS - JK RS485 DISPLAY
[![Badge License: GPLv3](https://img.shields.io/badge/License-GPLv3-brightgreen.svg)](https://www.gnu.org/licenses/gpl-3.0)
[![Badge Version](https://img.shields.io/github/v/release/Sleeper85/esphome-yambms?include_prereleases&color=yellow&logo=DocuSign&logoColor=white)](https://github.com/Sleeper85/esphome-yambms/releases/latest)
@@ -6,6 +6,10 @@
![GitHub forks](https://img.shields.io/github/forks/Sleeper85/esphome-yambms)
![GitHub watchers](https://img.shields.io/github/watchers/Sleeper85/esphome-yambms)
> [!IMPORTANT]
> The most important thing for proper functioning of YamBMS is that **the voltage of your BMS is well calibrated**.
> YamBMS logic is based on the `min_cell_voltage` and `max_cell_voltage` voltages of your BMS.
## External component
[esphome-jk-bms](https://github.com/syssi/esphome-jk-bms) by [@syssi](https://github.com/syssi)
+18 -30
View File
@@ -10,7 +10,7 @@
### 1. Install ESPHome on your computer
Before you can flash your ESP32 you need to install the [ESPHome 2024.6.0 or higher](https://github.com/esphome/esphome/releases) command line application.<br>
Before you can flash your ESP32 you need to install the [ESPHome 2025.3.0 or higher](https://github.com/esphome/esphome/releases) command line application.<br>
[Follow these instructions for installation on Windows, Mac or Linux.](https://esphome.io/guides/installing_esphome)
> [!TIP]
@@ -24,6 +24,9 @@ pip3 install esphome
### 2. Download all YAML files to your computer
> [!TIP]
> This step is not necessary if you are compiling the `Remote Packages` version of the YAML.
You can do this from the command line or in your preferred method.
You need to gather the following three points in the same folder. If you are compiling from your HA server use the `Samba Share` add-on so that you can copy the `packages` folder to the `esphome` folder on the HA server.
@@ -48,23 +51,17 @@ domain : .local
### 4. Install the YamBMS application into your ESP32
Choose the main YAML that best suits your needs like for example `multi-bms_JK-ALL_BLE.yaml`.<br>
Validate the configuration, create a binary, upload it, and start logs.<br>
**The only YAML that needs to be checked and configured is the main one like for example `multi-bms_JK-ALL_BLE.yaml` but you can modify other YAMLs if you want.<br>
The goal is that the main YAML which contains all your specific parameters can be preserved and reused each time the other YAMLs classified in the `packaged` folder are updated.**
Create a copy of `YamBMS_Remote_Packages_example.yaml` and modify it to match your configuration.
Examples of BMS imports can be found in the [configuration_examples](configuration_examples/) folder.
You can mix different BMS models, the only condition is that they are numbered in order starting from `1`.
```bash
# To install the multi-bms JK-ALL Bluetooth version
esphome run multi-bms_JK-ALL_BLE.yaml
# To install the multi-bms JK-B UART version
esphome run multi-bms_JK-B_UART.yaml
# To install the multi-bms JK-PB RS485 version
esphome run multi-bms_JK-PB_RS485_mode2.yaml
# install your YamBMS.yaml
# validate the configuration, create a binary, upload it, and start logs.
esphome run YamBMS.yaml
# upgrade via OTA by specifying the IP address of the ESP32
esphome run multi-bms_JK-ALL_BLE.yaml --device 192.168.x.x
esphome run YamBMS.yaml --device 192.168.x.x
```
### 5. Optional but recommended, add the ESP32 in your Home Assistant server
@@ -75,35 +72,26 @@ In Home Assistant under **" Settings > Devices and services > Add Intergration "
```bash
# clean files before compiling again
esphome clean multi-bms_JK-ALL_BLE.yaml
esphome clean YamBMS.yaml
# test the config
esphome config multi-bms_JK-ALL_BLE.yaml
esphome config YamBMS.yaml
# install the config in ESP32
esphome run multi-bms_JK-ALL_BLE.yaml
esphome run YamBMS.yaml
# compile the firmware.bin
esphome compile multi-bms_JK-ALL_BLE.yaml
esphome compile YamBMS.yaml
# check the logs (the --device option is not required)
esphome logs multi-bms_JK-ALL_BLE.yaml --device 192.168.x.x
esphome logs YamBMS.yaml --device 192.168.x.x
```
## Debugging
If this component doesn't work out of the box for your device please update your configuration to enable the debug output of the UART component and increase the log level to the see outgoing and incoming serial traffic:
If this component doesn't work out of the box for your device please update your configuration to increase the log level to `DEBUG`.
```
```YAML
logger:
level: DEBUG
uart:
id: uart_0
baud_rate: 115200
rx_buffer_size: 384
tx_pin: ${tx_pin}
rx_pin: ${rx_pin}
debug:
direction: BOTH
```
@@ -9,7 +9,7 @@
## Contents
1) [Galvanic isolation](Galvanic_isolation.md)
2) [JK-B BMS UART (GPS port) solution](BMS_JK-B_UART_solution.md)
3) [JK-B BMS RS485 (Display port) solution](BMS_JK-B_RS485_DISPLAY_solution.md)
4) [JK-PB BMS RS485 solution](BMS_JK-PB_RS485_solution.md)
5) [Victron SmartShunt How To](Shunt_Victron_SmartShunt_HowTo.md)
2) [JK-B BMS](BMS_JK-B.md)
3) [JK-PB BMS](BMS_JK-PB.md)
4) [JK RS485 DISPLAY](BMS_JK_RS485_DISPLAY.md)
5) [Victron SmartShunt](Shunt_Victron_SmartShunt.md)
@@ -1,4 +1,4 @@
# Victron SmartShunt How To
# Victron SmartShunt
[![Badge License: GPLv3](https://img.shields.io/badge/License-GPLv3-brightgreen.svg)](https://www.gnu.org/licenses/gpl-3.0)
[![Badge Version](https://img.shields.io/github/v/release/Sleeper85/esphome-yambms?include_prereleases&color=yellow&logo=DocuSign&logoColor=white)](https://github.com/Sleeper85/esphome-yambms/releases/latest)
@@ -44,6 +44,9 @@ To connect to your Victron device with BLE component you must have two informati
Use [VictronConnect App v5.93](https://www.victronenergy.com/live/victronconnect:beta) (or later) released on 2023-08-25.
Connect to the SmartShunt via Bluetooth under the `Local` tab.
![VictronConnect App Local page](../../images/Victron_SmartShunt_App_00_Local.jpg)
![VictronConnect App Settings page](../../images/Victron_SmartShunt_App_01_Settings.png)
![VictronConnect App Product info page](../../images/Victron_SmartShunt_App_02_ProductInfo.png)
![VictronConnect App Instant readout encryption data](../../images/Victron_SmartShunt_App_03_EncryptionData.png)
+1 -1
View File
@@ -41,7 +41,7 @@ Combine condition :
1) BMS `Online Status` is `ON / Connected` (to detect a loss of connection with the BMS e.g. cable, BMS OFF or dead)
2) The BMS `Battery Capacity` is `> 0` (to ensure that the data received is correct)
If one of these three conditions is not met, the BMS is automatically uncombined.
If one of these two conditions is not met, the BMS is automatically uncombined.
> [!IMPORTANT]
> In RS485 modbus `multi-node`, if a server does not respond (cable or hardware failure) the `Online Status` of the BMS will be set to `OFF` and it will be uncombined.
+41 -35
View File
@@ -1,4 +1,4 @@
# YamBMS - How to create your YamBMS YAML
# YamBMS - How to create your YamBMS YAML (Local Packages examples)
[![Badge License: GPLv3](https://img.shields.io/badge/License-GPLv3-brightgreen.svg)](https://www.gnu.org/licenses/gpl-3.0)
[![Badge Version](https://img.shields.io/github/v/release/Sleeper85/esphome-yambms?include_prereleases&color=yellow&logo=DocuSign&logoColor=white)](https://github.com/Sleeper85/esphome-yambms/releases/latest)
@@ -6,6 +6,11 @@
![GitHub forks](https://img.shields.io/github/forks/Sleeper85/esphome-yambms)
![GitHub watchers](https://img.shields.io/github/watchers/Sleeper85/esphome-yambms)
> [!TIP]
> Not sure which YAML to choose ? ... `YamBMS_Remote_Packages_example.yaml` is a good basis for creating your custom YAML.
> Examples of BMS imports can be found in the [configuration_examples](configuration_examples/) folder.
> You can mix different BMS models, the only condition is that they are numbered in order starting from `1`.
> [!IMPORTANT]
> BMS monitoring with `Bluetooth` as well as the `Web server` are RAM-intensive components.
> Please note that enabling these components will take up a lot of memory and may decrease the stability of your ESP32.
@@ -154,9 +159,6 @@ This board has an `Ethernet` port and can be powered from `POE` (optional).
## YamBMS single-node example
```YAML
# Config : this YAML contains the settings shared between all ESP32s
config_yambms: !include packages/config/config_yambms.yaml
shunt1: !include
file: packages/shunt/shunt_combine_Victron_SmartShunt_UART.yaml
vars:
@@ -166,7 +168,7 @@ This board has an `Ethernet` port and can be powered from `POE` (optional).
# ...
bms1: !include
file: packages/bms/bms_combine_JK-B_UART_full.yaml
file: packages/bms/bms_combine_JK_UART_4G-GPS_full.yaml
vars:
bms_id: '1' # must be a number
bms_name: 'BMS 1'
@@ -190,10 +192,6 @@ This board has an `Ethernet` port and can be powered from `POE` (optional).
### YamBMS modbus client `node1`
```YAML
# Config : this YAMLs contains the settings shared between all ESP32s
config_yambms: !include packages/config/config_yambms.yaml
config_multinode_modbus: !include packages/config/config_multi-node_modbus.yaml
modbus: !include
file: packages/base/device_modbus.yaml
vars:
@@ -228,10 +226,6 @@ This board has an `Ethernet` port and can be powered from `POE` (optional).
### ESP32 modbus server `node2`
```YAML
# Config : this YAMLs contains the settings shared between all ESP32s
config_yambms: !include packages/config/config_yambms.yaml
config_multinode_modbus: !include packages/config/config_multi-node_modbus.yaml
modbus: !include
file: packages/base/device_modbus.yaml
vars:
@@ -247,7 +241,7 @@ This board has an `Ethernet` port and can be powered from `POE` (optional).
# ...
bms1: !include
file: packages/bms/bms_modbus_JK-B_UART_full.yaml
file: packages/bms/bms_modbus_JK_UART_4G-GPS_full.yaml
vars:
bms_id: '1' # must be a number, also represents the modbus server number !
bms_name: 'BMS 1'
@@ -258,10 +252,6 @@ This board has an `Ethernet` port and can be powered from `POE` (optional).
### ESP32 modbus server `node3`
```YAML
# Config : this YAMLs contains the settings shared between all ESP32s
config_yambms: !include packages/config/config_yambms.yaml
config_multinode_modbus: !include packages/config/config_multi-node_modbus.yaml
modbus: !include
file: packages/base/device_modbus.yaml
vars:
@@ -269,7 +259,7 @@ This board has an `Ethernet` port and can be powered from `POE` (optional).
modbus_uart_id: 'uart_esp_1' # RS485 board
bms2: !include
file: packages/bms/bms_modbus_JK-ALL_BLE_standard.yaml
file: packages/bms/bms_modbus_JK_BLE_standard.yaml
vars:
bms_id: '2' # must be a number, also represents the modbus server number !
bms_name: 'BMS 2'
@@ -277,7 +267,7 @@ This board has an `Ethernet` port and can be powered from `POE` (optional).
# ...
bms3: !include
file: packages/bms/bms_modbus_JK-ALL_BLE_standard.yaml
file: packages/bms/bms_modbus_JK_BLE_standard.yaml
vars:
bms_id: '3' # must be a number, also represents the modbus server number !
bms_name: 'BMS 3'
@@ -299,7 +289,7 @@ There are other `bms.yaml` not mentioned here, see in the [bms](../../packages/b
The `full` / `standard` versions contain all available sensors while the `minimal` version contains the basic sensors without the voltages of each cell and other superfluous sensors.
### [JK-ALL (BLE)](https://github.com/syssi/esphome-jk-bms)
### [JK-BMS (BLE)](https://github.com/syssi/esphome-jk-bms)
> [!IMPORTANT]
> The BLE software stack on the ESP32 consumes a significant amount of RAM on the device.
@@ -308,28 +298,34 @@ The `full` / `standard` versions contain all available sensors while the `minima
```YAML
bms1: !include
file: packages/bms/bms_combine_JK-ALL_BLE_standard.yaml # bms_modbus_JK-ALL_BLE_standard.yaml
file: packages/bms/bms_combine_JK_BLE_standard.yaml # bms_modbus_JK_BLE_standard.yaml
vars:
bms_id: '1' # must be a number
bms_name: 'BMS 1'
bms_ble_protocol_version: 'JK02_32S' # JK02_24S < hardware version 11.0 >= JK02_32S
bms_ble_mac_address: 'C8:47:8C:10:7E:AA' # Your MAC address
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
```
### [JK-B (UART)](https://github.com/syssi/esphome-jk-bms)
### [JK-BMS (UART 4G-GPS)](https://github.com/syssi/esphome-jk-bms)
[How to make the UART connection with the ESP32.](BMS_JK-B_UART_solution.md)
```YAML
bms1: !include
file: packages/bms/bms_combine_JK-B_UART_full.yaml # bms_modbus_JK-B_UART_full.yaml
file: packages/bms/bms_combine_JK_UART_4G-GPS_full.yaml # bms_modbus_JK_UART_4G-GPS_full.yaml
vars:
bms_id: '1' # must be a number
bms_name: 'BMS 1'
bms_uart_id: 'uart_esp_1'
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
```
### [JK-B (RS485 DISPLAY)](https://github.com/syssi/esphome-jk-bms)
### [JK-BMS (RS485 DISPLAY)](https://github.com/syssi/esphome-jk-bms)
> [!CAUTION]
> The `jk_bms_display` component does not provide all the information needed for an optimal operation of `YamBMS`.
@@ -340,7 +336,7 @@ The `full` / `standard` versions contain all available sensors while the `minima
```YAML
bms1: !include
file: packages/bms/bms_combine_JK-B_RS485_DISPLAY_full.yaml
file: packages/bms/bms_combine_JK_RS485_DISPLAY_full.yaml
vars:
bms_id: '1' # must be a number
bms_name: 'BMS 1'
@@ -353,15 +349,21 @@ The `full` / `standard` versions contain all available sensors while the `minima
bms_max_discharge_current: '100' # A. Used to calculate maximum discharge current
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
```
### [JK-PB (RS485)](https://github.com/txubelaxu/esphome-jk-bms/)
### [JK-BMS (RS485 Modbus)](https://github.com/txubelaxu/esphome-jk-bms/)
> [!TIP]
> Compatible with JK-PB, JK-B HW. >= 11A
A single `RS485 bus` allows you to monitor up to `16` BMS.
[How to make the RS485 connection with the ESP32.](BMS_JK-PB_RS485_solution.md)
#### JK-PB sniffer
#### JK sniffer
> [!IMPORTANT]
> You need to import only one `sniffer` package of your choice.
@@ -374,7 +376,7 @@ Sniffer without `talk_pin` :
```YAML
sniffer1: !include
file: packages/bms/bms_combine_JK-PB_RS485_sniffer.yaml
file: packages/bms/bms_combine_JK_RS485_Modbus_sniffer.yaml
vars:
sniffer_id: 'sniffer1'
sniffer_protocol: 'JK02_32S'
@@ -385,7 +387,7 @@ If your `RS485` board requires a `talk_pin` you must specify which `GPIO` will b
```YAML
sniffer1: !include
file: packages/bms/bms_combine_JK-PB_RS485_sniffer_talk_pin.yaml
file: packages/bms/bms_combine_JK_RS485_Modbus_sniffer_talk_pin.yaml
vars:
sniffer_id: 'sniffer1'
sniffer_protocol: 'JK02_32S'
@@ -393,12 +395,12 @@ If your `RS485` board requires a `talk_pin` you must specify which `GPIO` will b
sniffer_talk_pin: 8 # ESP32: 4, ESP32-S3: 8, ESP32-C3: 10
```
#### JK-PB BMS
#### JK-BMS (JK-PB, JK-B HW. >= 11A)
```YAML
# Mode2 : configure the DIP switches of your BMS from 0x01 to 0x0F (don't use the 0x00 address, maximum 15 BMS)
bms1: !include
file: packages/bms/bms_combine_JK-PB_RS485_bms_full.yaml
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_full.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
@@ -426,6 +428,9 @@ If your `RS485` board requires a `talk_pin` you must specify which `GPIO` will b
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
```
### [JBD (BLE)](https://github.com/syssi/esphome-jbd-bms)
@@ -445,6 +450,9 @@ If your `RS485` board requires a `talk_pin` you must specify which `GPIO` will b
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
```
### [Seplos V1/V2 (RS485)](https://github.com/syssi/esphome-seplos-bms)
@@ -585,8 +593,6 @@ Take the time to configure `YamBMS` correctly according to your battery chemistr
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# Maximum charging cycles is used to calculate the battey SOH, LF280K v3 =8000.0, LF280K v2 =6000.0, LF280=3000.0 (decimal is required)
yambms_max_cycles: '6000.0'
```
## CAN bus
@@ -606,7 +612,7 @@ You can keep the default configuration.
# CANBUS vars
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_node1'
canbus_node_id: 'canbus_inverter_1'
canbus_light_id: 'esp_light'
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
Binary file not shown.

After

Width:  |  Height:  |  Size: 587 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 106 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 38 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 176 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 527 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 3.9 MiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 38 KiB

-176
View File
@@ -1,176 +0,0 @@
# Updated : 2025.01.28
# Version : 1.5.4
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
substitutions:
name: yambms
# Don't forget to configure your WiFi credentials in the secrets.yaml file
#
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: INFO # DEBUG / INFO / WARN
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
#web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
packages:
############### >>> UNCOMMENT YOUR BOARD <<< ###############
# This list is incomplete, other board.yaml are available in the board folder
device_board: !include packages/board/board_ESP32_Generic.yaml
# device_board: !include packages/board/board_ESP32_DevKit-V1.yaml
# device_board: !include packages/board/board_ESP32_LilyGo-T-CAN485.yaml
# device_board: !include packages/board/board_ESP32-C3_ETH01-EVO.yaml
# device_board: !include packages/board/board_ESP32-S3_DevKitC-1.yaml
# device_board: !include packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml
# device_board: !include packages/board/board_ESP32-S3_AtomS3-Lite.yaml
# device_board: !include
# file: packages/board/board_ESP32-S3_AtomS3.yaml # board_ESP32-S3_AtomS3R.yaml
# vars:
# display_auto_next_page_interval: '5s'
############################################################
# Config : this YAML contains the settings shared between all ESP32s
config_yambms: !include packages/config/config_yambms.yaml
# shunt1: !include
# file: packages/shunt/shunt_combine_Victron_SmartShunt_UART.yaml # shunt_combine_Junctek_KHF_UART.yaml
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_uart_id: uart_esp_0
bms1: !include
file: packages/bms/bms_combine_JBD_UART_full.yaml
vars:
bms_id: '1' # must be a number
bms_name: 'BMS 1'
bms_uart_id: 'uart_esp_1'
bms_rx_timeout: '150ms'
# Required settings cannot be retrieved from BMS
# These values ​​must match your BMS settings
# LFP values example
bms_max_charge_current: '100' # A. Used to calculate maximum charge current
bms_max_discharge_current: '100' # A. Used to calculate maximum discharge current
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
bms2: !include
file: packages/bms/bms_combine_JBD_BLE_full.yaml
vars:
bms_id: '2' # must be a number
bms_name: 'BMS 2'
bms_ble_mac_address: 'C8:47:8C:10:7E:AA' # Your MAC address
# Required settings cannot be retrieved from BMS
# These values ​​must match your BMS settings
# LFP values example
bms_max_charge_current: '100' # A. Used to calculate maximum charge current
bms_max_discharge_current: '100' # A. Used to calculate maximum discharge current
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
yambms1: !include
file: packages/yambms/yambms.yaml
vars:
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# Maximum charging cycles is used to calculate the battey SOH, LF280K v3 =8000.0, LF280K v2 =6000.0, LF280=3000.0 (decimal is required)
yambms_max_cycles: '6000.0'
canbus1: !include
file: packages/yambms/yambms_canbus.yaml
vars:
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_node1'
canbus_light_id: 'esp_light'
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
canbus_link_timer: '5s'
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |
# +--------------------------------------+
device_debug: !include
file: packages/base/device_debug_ESP32.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'
-169
View File
@@ -1,169 +0,0 @@
# Updated : 2025.01.16
# Version : 1.5.3
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
substitutions:
name: yambms
# Don't forget to configure your WiFi credentials in the secrets.yaml file
#
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: DEBUG # DEBUG / INFO / WARN
logs:
esp32_ble_tracker: INFO
esp32_ble_client: INFO
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
#web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
# Max 3 BLE connections.
# The BLE software stack (Bluedroid) on the ESP32 consumes a significant amount of RAM on the device.
# Crashes are likely to occur if you include too many additional components in your device’s configuration.
# https://esphome.io/components/ble_client.html
packages:
############### >>> UNCOMMENT YOUR BOARD <<< ###############
# This list is incomplete, other board.yaml are available in the board folder
device_board: !include packages/board/board_ESP32_Generic.yaml
# device_board: !include packages/board/board_ESP32_DevKit-V1.yaml
# device_board: !include packages/board/board_ESP32_LilyGo-T-CAN485.yaml
# device_board: !include packages/board/board_ESP32-C3_ETH01-EVO.yaml
# device_board: !include packages/board/board_ESP32-S3_DevKitC-1.yaml
# device_board: !include packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml
# device_board: !include packages/board/board_ESP32-S3_AtomS3-Lite.yaml
# device_board: !include
# file: packages/board/board_ESP32-S3_AtomS3.yaml # board_ESP32-S3_AtomS3R.yaml
# vars:
# display_auto_next_page_interval: '5s'
############################################################
# Config : this YAML contains the settings shared between all ESP32s
config_yambms: !include packages/config/config_yambms.yaml
# shunt1: !include
# file: packages/shunt/shunt_combine_Victron_SmartShunt_UART.yaml # shunt_combine_Junctek_KHF_UART.yaml
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_uart_id: uart_esp_0
bms1: !include
file: packages/bms/bms_combine_JK-ALL_BLE_standard.yaml
vars:
bms_id: '1' # must be a number
bms_name: 'JK-BMS 1'
bms_ble_protocol_version: 'JK02_32S' # JK02_24S < hardware version 11.0 >= JK02_32S
bms_ble_mac_address: 'C8:47:8C:10:7E:AA'
bms2: !include
file: packages/bms/bms_combine_JK-ALL_BLE_standard.yaml
vars:
bms_id: '2' # must be a number
bms_name: 'JK-BMS 2'
bms_ble_protocol_version: 'JK02_32S' # JK02_24S < hardware version 11.0 >= JK02_32S
bms_ble_mac_address: 'C8:47:8C:EE:16:EA'
yambms1: !include
file: packages/yambms/yambms.yaml
vars:
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# Maximum charging cycles is used to calculate the battey SOH, LF280K v3 =8000.0, LF280K v2 =6000.0, LF280=3000.0 (decimal is required)
yambms_max_cycles: '6000.0'
canbus1: !include
file: packages/yambms/yambms_canbus.yaml
vars:
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_node1'
canbus_light_id: 'esp_light'
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
canbus_link_timer: '5s'
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |
# +--------------------------------------+
device_debug: !include
file: packages/base/device_debug_ESP32.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'
-159
View File
@@ -1,159 +0,0 @@
# Updated : 2025.01.16
# Version : 1.5.3
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
substitutions:
name: yambms
# Don't forget to configure your WiFi credentials in the secrets.yaml file
#
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: INFO # DEBUG / INFO / WARN
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
#web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
packages:
############### >>> UNCOMMENT YOUR BOARD <<< ###############
# This list is incomplete, other board.yaml are available in the board folder
device_board: !include packages/board/board_ESP32_Generic.yaml
# device_board: !include packages/board/board_ESP32_DevKit-V1.yaml
# device_board: !include packages/board/board_ESP32_LilyGo-T-CAN485.yaml
# device_board: !include packages/board/board_ESP32-C3_ETH01-EVO.yaml
# device_board: !include packages/board/board_ESP32-S3_DevKitC-1.yaml
# device_board: !include packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml
# device_board: !include packages/board/board_ESP32-S3_AtomS3-Lite.yaml
# device_board: !include
# file: packages/board/board_ESP32-S3_AtomS3.yaml # board_ESP32-S3_AtomS3R.yaml
# vars:
# display_auto_next_page_interval: '5s'
############################################################
# Config : this YAML contains the settings shared between all ESP32s
config_yambms: !include packages/config/config_yambms.yaml
# shunt1: !include
# file: packages/shunt/shunt_combine_Victron_SmartShunt_UART.yaml # shunt_combine_Junctek_KHF_UART.yaml
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_uart_id: uart_esp_0
bms1: !include
file: packages/bms/bms_combine_JK-B_UART_full.yaml
vars:
bms_id: '1' # must be a number
bms_name: 'JK-BMS 1'
bms_uart_id: 'uart_esp_1'
bms2: !include
file: packages/bms/bms_combine_JK-B_UART_full.yaml
vars:
bms_id: '2' # must be a number
bms_name: 'JK-BMS 2'
bms_uart_id: 'uart_esp_2'
yambms1: !include
file: packages/yambms/yambms.yaml
vars:
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# Maximum charging cycles is used to calculate the battey SOH, LF280K v3 =8000.0, LF280K v2 =6000.0, LF280=3000.0 (decimal is required)
yambms_max_cycles: '6000.0'
canbus1: !include
file: packages/yambms/yambms_canbus.yaml
vars:
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_node1'
canbus_light_id: 'esp_light'
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
canbus_link_timer: '5s'
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |
# +--------------------------------------+
device_debug: !include
file: packages/base/device_debug_ESP32.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'
-177
View File
@@ -1,177 +0,0 @@
# Updated : 2025.01.16
# Version : 1.5.3
# GitHub : https://github.com/SeByDocKy/pvbrain2
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
substitutions:
name: 'pvbrain2'
###### For extended UART ports with the 2 WK2168 ######
uart0_baudrate: '2400' #WKS {RJ45-UART0}
uart1_baudrate: '38400' #JSY193
uart2_baudrate: '19200' #SmartShunt
uart3_baudrate: '9600' #SRNE {RJ45-UART3}
uart4_baudrate: '115200' #JK-BMS 1
uart5_baudrate: '115200' #JK-BMS 2
uart6_baudrate: '115200' #Pylontech
uart7_baudrate: '9600' #EPEVER {RJ45-UART7}
#######################################################
# Don't forget to configure your WiFi credentials in the secrets.yaml file
#
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: INFO # DEBUG / INFO / WARN
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
#web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | PVbrain2 packages |
# +--------------------------------------+
packages:
device_board: !include packages/board/board_ESP32-S3_DevKitC-1_PVbrain2.yaml
# Config : this YAML contains the settings shared between all ESP32s
config_yambms: !include packages/config/config_yambms.yaml
# BUS
# bus_i2c0: !include pvbrain2/base/device_bus_i2c0.yaml # SX1509 and BME280/BMP280
bus_spi1: !include pvbrain2/base/device_bus_spi1.yaml # MCP2515
# bus_one_wire: !include pvbrain2/base/device_bus_one_wire.yaml # Dallas
# Devices
device_uart_esp: !include pvbrain2/base/device_uart_esp.yaml
device_wk2168_spi: !include pvbrain2/base/device_wk2168_spi.yaml
# device_wk2168_i2c: !include pvbrain2/base/device_wk2168_i2c.yaml
# device_sx1509: !include pvbrain2/base/device_sx1509.yaml
device_canbus_node1: !include pvbrain2/base/device_canbus_esp32can.yaml
device_canbus_node2: !include pvbrain2/base/device_canbus_mcp2515.yaml
# +--------------------------------------+
# | YamBMS packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
# You don't have to import a shunt but you must import at least one BMS.
shunt1: !include
file: packages/shunt/shunt_combine_Victron_SmartShunt_UART_expander.yaml # shunt_combine_Junctek_KHF_UART.yaml
vars:
shunt_id: '1' # must be a number
shunt_name: 'Shunt 1'
shunt_uart_id: 'uart_${uart_hub_bus}_2'
bms1: !include
file: packages/bms/bms_combine_JK-B_UART_full.yaml
vars:
bms_id: '1' # must be a number
bms_name: 'JK-BMS 1'
bms_uart_id: 'uart_${uart_hub_bus}_4'
bms2: !include
file: packages/bms/bms_combine_JK-B_UART_full.yaml
vars:
bms_id: '2' # must be a number
bms_name: 'JK-BMS 2'
bms_uart_id: 'uart_${uart_hub_bus}_5'
yambms1: !include
file: packages/yambms/yambms.yaml
vars:
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# Maximum charging cycles is used to calculate the battey SOH, LF280K v3 =8000.0, LF280K v2 =6000.0, LF280=3000.0 (decimal is required)
yambms_max_cycles: '6000.0'
canbus1: !include
file: packages/yambms/yambms_canbus.yaml
vars:
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_node1'
canbus_light_id: 'led_light_1' # on_board_light_io48
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
canbus_link_timer: '5s'
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |
# +--------------------------------------+
device_debug: !include
file: packages/base/device_debug_ESP32.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'
# Size of your PSRAM in bits
# 8Mb='8388608' | 6Mb='6291456' | 4Mb='4194304' | 2Mb='2097152' | NoPSRAM='0'
debug_psram_size: '8388608'
-234
View File
@@ -1,234 +0,0 @@
# Updated : 2025.01.16
# Version : 1.5.3
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
substitutions:
name: yambms
# Don't forget to configure your WiFi credentials in the secrets.yaml file
#
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: INFO # DEBUG / INFO / WARN
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
#web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
packages:
############### >>> UNCOMMENT YOUR BOARD <<< ###############
# This list is incomplete, other board.yaml are available in the board folder
# device_board: !include packages/board/board_ESP32_Generic.yaml
# device_board: !include packages/board/board_ESP32_DevKit-V1.yaml
# device_board: !include packages/board/board_ESP32_LilyGo-T-CAN485.yaml
# device_board: !include packages/board/board_ESP32-C3_ETH01-EVO.yaml
# device_board: !include packages/board/board_ESP32-S3_DevKitC-1.yaml
# device_board: !include packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml
device_board: !include packages/board/board_ESP32-S3_AtomS3-Lite.yaml
# device_board: !include
# file: packages/board/board_ESP32-S3_AtomS3.yaml # board_ESP32-S3_AtomS3R.yaml
# vars:
# display_auto_next_page_interval: '5s'
############################################################
# Config : this YAML contains the settings shared between all ESP32s
config_yambms: !include packages/config/config_yambms.yaml
# shunt1: !include
# file: packages/shunt/shunt_combine_Victron_SmartShunt_UART.yaml # shunt_combine_Junctek_KHF_UART.yaml
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_uart_id: uart_esp_0
# The sniffer represents the ESP node connected to the JK-BMS PB RS485 bus
# If address 0x00 is not detected on the RS485 bus, the sniffer will act directly as a master BMS (mode 2, max 15 BMS)
# sniffer1: !include
# file: packages/bms/bms_combine_JK-PB_RS485_sniffer_talk_pin.yaml
# vars:
# sniffer_id: 'sniffer1'
# sniffer_protocol: 'JK02_32S'
# sniffer_uart_id: 'uart_esp_1'
# sniffer_talk_pin: 8 # ESP32: 4, ESP32-S3: 8, ESP32-C3: 10
sniffer1: !include
file: packages/bms/bms_combine_JK-PB_RS485_sniffer.yaml
vars:
sniffer_id: 'sniffer1'
sniffer_protocol: 'JK02_32S'
sniffer_uart_id: 'uart_esp_1'
# Mode2 : configure the DIP switches of your BMS from 0x01 to 0x0F (don't use the 0x00 address, maximum 15 BMS)
bms1: !include
file: packages/bms/bms_combine_JK-PB_RS485_bms_full.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '1' # must be a number
bms_name: 'JK-BMS 1'
bms_address: '0x01' # BMS 1 DIP switch
bms2: !include
file: packages/bms/bms_combine_JK-PB_RS485_bms_full.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '2' # must be a number
bms_name: 'JK-BMS 2'
bms_address: '0x02' # BMS 2 DIP switch
bms3: !include
file: packages/bms/bms_combine_JK-PB_RS485_bms_full.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '3' # must be a number
bms_name: 'JK-BMS 3'
bms_address: '0x03' # BMS 3 DIP switch
bms4: !include
file: packages/bms/bms_combine_JK-PB_RS485_bms_full.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '4' # must be a number
bms_name: 'JK-BMS 4'
bms_address: '0x04' # BMS 4 DIP switch
bms5: !include
file: packages/bms/bms_combine_JK-PB_RS485_bms_full.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '5' # must be a number
bms_name: 'JK-BMS 5'
bms_address: '0x05' # BMS 5 DIP switch
bms6: !include
file: packages/bms/bms_combine_JK-PB_RS485_bms_full.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '6' # must be a number
bms_name: 'JK-BMS 6'
bms_address: '0x06' # BMS 6 DIP switch
bms7: !include
file: packages/bms/bms_combine_JK-PB_RS485_bms_full.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '7' # must be a number
bms_name: 'JK-BMS 7'
bms_address: '0x07' # BMS 7 DIP switch
yambms1: !include
file: packages/yambms/yambms.yaml
vars:
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# Maximum charging cycles is used to calculate the battey SOH, LF280K v3 =8000.0, LF280K v2 =6000.0, LF280=3000.0 (decimal is required)
yambms_max_cycles: '6000.0'
canbus1: !include
file: packages/yambms/yambms_canbus.yaml
vars:
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_node1'
canbus_light_id: 'esp_light'
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
canbus_link_timer: '5s'
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |
# +--------------------------------------+
device_debug: !include
file: packages/base/device_debug_ESP32.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'
-224
View File
@@ -1,224 +0,0 @@
# Updated : 2025.01.16
# Version : 1.5.3
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
substitutions:
name: yambms
# Don't forget to configure your WiFi credentials in the secrets.yaml file
#
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: INFO # DEBUG / INFO / WARN
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
#web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
packages:
############### >>> UNCOMMENT YOUR BOARD <<< ###############
device_board: !include
file: packages/board/board_ESP32-S3_AtomS3.yaml # board_ESP32-S3_AtomS3R.yaml
vars:
display_auto_next_page_interval: '5s'
############################################################
# Config : this YAML contains the settings shared between all ESP32s
config_yambms: !include packages/config/config_yambms.yaml
# shunt1: !include
# file: packages/shunt/shunt_combine_Victron_SmartShunt_UART.yaml # shunt_combine_Junctek_KHF_UART.yaml
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_uart_id: uart_esp_0
# The sniffer represents the ESP node connected to the JK-BMS PB RS485 bus
# If address 0x00 is not detected on the RS485 bus, the sniffer will act directly as a master BMS (mode 2, max 15 BMS)
# sniffer1: !include
# file: packages/bms/bms_combine_JK-PB_RS485_sniffer_talk_pin.yaml
# vars:
# sniffer_id: 'sniffer1'
# sniffer_protocol: 'JK02_32S'
# sniffer_uart_id: 'uart_esp_1'
# sniffer_talk_pin: 8 # ESP32: 4, ESP32-S3: 8, ESP32-C3: 10
sniffer1: !include
file: packages/bms/bms_combine_JK-PB_RS485_sniffer.yaml
vars:
sniffer_id: 'sniffer1'
sniffer_protocol: 'JK02_32S'
sniffer_uart_id: 'uart_esp_1'
# Mode2 : configure the DIP switches of your BMS from 0x01 to 0x0F (don't use the 0x00 address, maximum 15 BMS)
bms1: !include
file: packages/bms/bms_combine_JK-PB_RS485_bms_full.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '1' # must be a number
bms_name: 'JK-BMS 1'
bms_address: '0x01' # BMS 1 DIP switch
bms2: !include
file: packages/bms/bms_combine_JK-PB_RS485_bms_full.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '2' # must be a number
bms_name: 'JK-BMS 2'
bms_address: '0x02' # BMS 2 DIP switch
# bms3: !include
# file: packages/bms/bms_combine_JK-PB_RS485_bms_full.yaml
# vars:
# # Sniffer ID
# sniffer_id: 'sniffer1'
# # BMS vars
# bms_id: '3' # must be a number
# bms_name: 'JK-BMS 3'
# bms_address: '0x03' # BMS 3 DIP switch
# bms4: !include
# file: packages/bms/bms_combine_JK-PB_RS485_bms_full.yaml
# vars:
# # Sniffer ID
# sniffer_id: 'sniffer1'
# # BMS vars
# bms_id: '4' # must be a number
# bms_name: 'JK-BMS 4'
# bms_address: '0x04' # BMS 4 DIP switch
# bms5: !include
# file: packages/bms/bms_combine_JK-PB_RS485_bms_full.yaml
# vars:
# # Sniffer ID
# sniffer_id: 'sniffer1'
# # BMS vars
# bms_id: '5' # must be a number
# bms_name: 'JK-BMS 5'
# bms_address: '0x05' # BMS 5 DIP switch
# bms6: !include
# file: packages/bms/bms_combine_JK-PB_RS485_bms_full.yaml
# vars:
# # Sniffer ID
# sniffer_id: 'sniffer1'
# # BMS vars
# bms_id: '6' # must be a number
# bms_name: 'JK-BMS 6'
# bms_address: '0x06' # BMS 6 DIP switch
# bms7: !include
# file: packages/bms/bms_combine_JK-PB_RS485_bms_full.yaml
# vars:
# # Sniffer ID
# sniffer_id: 'sniffer1'
# # BMS vars
# bms_id: '7' # must be a number
# bms_name: 'JK-BMS 7'
# bms_address: '0x07' # BMS 7 DIP switch
yambms1: !include
file: packages/yambms/yambms.yaml
vars:
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# Maximum charging cycles is used to calculate the battey SOH, LF280K v3 =8000.0, LF280K v2 =6000.0, LF280=3000.0 (decimal is required)
yambms_max_cycles: '6000.0'
canbus1: !include
file: packages/yambms/yambms_canbus.yaml
vars:
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_node1'
canbus_light_id: 'esp_light'
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
canbus_link_timer: '5s'
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |
# +--------------------------------------+
device_debug: !include
file: packages/base/device_debug_ESP32.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'
@@ -1,211 +0,0 @@
# Updated : 2025.01.16
# Version : 1.5.3
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
substitutions:
name: yambms
# Don't forget to configure your WiFi credentials in the secrets.yaml file
#
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: DEBUG # DEBUG / INFO / WARN
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
#web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
packages:
############### >>> UNCOMMENT YOUR BOARD <<< ###############
device_board: !include packages/board/board_ESP32_LilyGo-T-CAN485.yaml
############################################################
# Config : this YAML contains the settings shared between all ESP32s
config_yambms: !include packages/config/config_yambms.yaml
# shunt1: !include
# file: packages/shunt/shunt_combine_Victron_SmartShunt_UART.yaml # shunt_combine_Junctek_KHF_UART.yaml
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_uart_id: uart_esp_0
# The sniffer represents the ESP node connected to the JK-BMS PB RS485 bus
# If address 0x00 is not detected on the RS485 bus, the sniffer will act directly as a master BMS (mode 2, max 15 BMS)
# sniffer1: !include
# file: packages/bms/bms_combine_JK-PB_RS485_sniffer_talk_pin.yaml
# vars:
# sniffer_id: 'sniffer1'
# sniffer_protocol: 'JK02_32S'
# sniffer_uart_id: 'uart_esp_1'
# sniffer_talk_pin: 17
sniffer1: !include
file: packages/bms/bms_combine_JK-PB_RS485_sniffer.yaml
vars:
sniffer_id: 'sniffer1'
sniffer_protocol: 'JK02_32S'
sniffer_uart_id: 'uart_esp_1'
# Mode2 : configure the DIP switches of your BMS from 0x01 to 0x0F (don't use the 0x00 address, maximum 15 BMS)
bms1: !include
file: packages/bms/bms_combine_JK-PB_RS485_bms_minimal.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '1' # must be a number
bms_name: 'JK-BMS 1'
bms_address: '0x01' # BMS 1 DIP switch
bms2: !include
file: packages/bms/bms_combine_JK-PB_RS485_bms_minimal.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '2' # must be a number
bms_name: 'JK-BMS 2'
bms_address: '0x02' # BMS 2 DIP switch
bms3: !include
file: packages/bms/bms_combine_JK-PB_RS485_bms_minimal.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '3' # must be a number
bms_name: 'JK-BMS 3'
bms_address: '0x03' # BMS 3 DIP switch
bms4: !include
file: packages/bms/bms_combine_JK-PB_RS485_bms_minimal.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '4' # must be a number
bms_name: 'JK-BMS 4'
bms_address: '0x04' # BMS 4 DIP switch
bms5: !include
file: packages/bms/bms_combine_JK-PB_RS485_bms_minimal.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '5' # must be a number
bms_name: 'JK-BMS 5'
bms_address: '0x05' # BMS 5 DIP switch
bms6: !include
file: packages/bms/bms_combine_JK-PB_RS485_bms_minimal.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '6' # must be a number
bms_name: 'JK-BMS 6'
bms_address: '0x06' # BMS 6 DIP switch
yambms1: !include
file: packages/yambms/yambms.yaml
vars:
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# Maximum charging cycles is used to calculate the battey SOH, LF280K v3 =8000.0, LF280K v2 =6000.0, LF280=3000.0 (decimal is required)
yambms_max_cycles: '6000.0'
canbus1: !include
file: packages/yambms/yambms_canbus.yaml
vars:
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_node1'
canbus_light_id: 'esp_light'
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
canbus_link_timer: '5s'
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |
# +--------------------------------------+
device_debug: !include
file: packages/base/device_debug_ESP32.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'
-244
View File
@@ -1,244 +0,0 @@
# Updated : 2025.01.16
# Version : 1.5.3
# GitHub : https://github.com/SeByDocKy/pvbrain2
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
substitutions:
name: 'pvbrain2'
###### For extended UART ports with the 2 WK2168 ######
uart0_baudrate: '2400' #WKS {RJ45-UART0}
uart1_baudrate: '38400' #JSY193
uart2_baudrate: '19200' #smartshunt
uart3_baudrate: '9600' #SRNE {RJ45-UART3}
uart4_baudrate: '115200' #JK-BMS 1
uart5_baudrate: '115200' #JK-BMS 2
uart6_baudrate: '115200' #Pylontech
uart7_baudrate: '9600' #EPEVER {RJ45-UART7}
#######################################################
# Don't forget to configure your WiFi credentials in the secrets.yaml file
#
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: INFO # DEBUG / INFO / WARN
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
#web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | PVbrain2 packages |
# +--------------------------------------+
packages:
device_board: !include packages/board/board_ESP32-S3_DevKitC-1_PVbrain2.yaml
# Config : this YAML contains the settings shared between all ESP32s
config_yambms: !include packages/config/config_yambms.yaml
# BUS
# bus_i2c0: !include pvbrain2/base/device_bus_i2c0.yaml # SX1509 and BME280/BMP280
bus_spi1: !include pvbrain2/base/device_bus_spi1.yaml # MCP2515
# bus_one_wire: !include pvbrain2/base/device_bus_one_wire.yaml # Dallas
# Devices
device_uart_esp: !include pvbrain2/base/device_uart_esp.yaml
device_wk2168_spi: !include pvbrain2/base/device_wk2168_spi.yaml
# device_wk2168_i2c: !include pvbrain2/base/device_wk2168_i2c.yaml
# device_sx1509: !include pvbrain2/base/device_sx1509.yaml
device_canbus_node1: !include pvbrain2/base/device_canbus_esp32can.yaml
device_canbus_node2: !include pvbrain2/base/device_canbus_mcp2515.yaml
# +--------------------------------------+
# | YamBMS packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
# You don't have to import a shunt but you must import at least one BMS.
shunt1: !include
file: packages/shunt/shunt_combine_Victron_SmartShunt_UART_expander.yaml # shunt_combine_Junctek_KHF_UART.yaml
vars:
shunt_id: '1' # must be a number
shunt_name: 'Shunt 1'
shunt_uart_id: uart_${uart_hub_bus}_2
# The sniffer represents the ESP node connected to the JK-BMS PB RS485 bus
# If address 0x00 is not detected on the RS485 bus, the sniffer will act directly as a master BMS (mode 2, max 15 BMS)
sniffer1: !include
file: packages/bms/bms_combine_JK-PB_RS485_sniffer.yaml
vars:
sniffer_id: 'sniffer1'
sniffer_protocol: 'JK02_32S'
sniffer_uart_id: uart_${uart_hub_bus}_4
# Mode2 : configure the DIP switches of your BMS from 0x01 to 0x0F (don't use the 0x00 address, maximum 15 BMS)
bms1: !include
file: packages/bms/bms_combine_JK-PB_RS485_bms_full.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '1' # must be a number
bms_name: 'JK-BMS 1'
bms_address: '0x01' # BMS 1 DIP switch
bms2: !include
file: packages/bms/bms_combine_JK-PB_RS485_bms_full.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '2' # must be a number
bms_name: 'JK-BMS 2'
bms_address: '0x02' # BMS 2 DIP switch
# bms3: !include
# file: packages/bms/bms_combine_JK-PB_RS485_bms_full.yaml
# vars:
# # Sniffer ID
# sniffer_id: 'sniffer1'
# # BMS vars
# bms_id: '3' # must be a number
# bms_name: 'JK-BMS 3'
# bms_address: '0x03' # BMS 3 DIP switch
# bms4: !include
# file: packages/bms/bms_combine_JK-PB_RS485_bms_full.yaml
# vars:
# # Sniffer ID
# sniffer_id: 'sniffer1'
# # BMS vars
# bms_id: '4' # must be a number
# bms_name: 'JK-BMS 4'
# bms_address: '0x04' # BMS 4 DIP switch
# bms5: !include
# file: packages/bms/bms_combine_JK-PB_RS485_bms_full.yaml
# vars:
# # Sniffer ID
# sniffer_id: 'sniffer1'
# # BMS vars
# bms_id: '5' # must be a number
# bms_name: 'JK-BMS 5'
# bms_address: '0x05' # BMS 5 DIP switch
# bms6: !include
# file: packages/bms/bms_combine_JK-PB_RS485_bms_full.yaml
# vars:
# # Sniffer ID
# sniffer_id: 'sniffer1'
# # BMS vars
# bms_id: '6' # must be a number
# bms_name: 'JK-BMS 6'
# bms_address: '0x06' # BMS 6 DIP switch
# bms7: !include
# file: packages/bms/bms_combine_JK-PB_RS485_bms_full.yaml
# vars:
# # Sniffer ID
# sniffer_id: 'sniffer1'
# # BMS vars
# bms_id: '7' # must be a number
# bms_name: 'JK-BMS 7'
# bms_address: '0x07' # BMS 7 DIP switch
yambms1: !include
file: packages/yambms/yambms.yaml
vars:
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# Maximum charging cycles is used to calculate the battey SOH, LF280K v3 =8000.0, LF280K v2 =6000.0, LF280=3000.0 (decimal is required)
yambms_max_cycles: '6000.0'
canbus1: !include
file: packages/yambms/yambms_canbus.yaml
vars:
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_node1'
canbus_light_id: 'led_light_1' # on_board_light_io48
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
canbus_link_timer: '5s'
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |
# +--------------------------------------+
device_debug: !include
file: packages/base/device_debug_ESP32.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'
# Size of your PSRAM in bits
# 8Mb='8388608' | 6Mb='6291456' | 4Mb='4194304' | 2Mb='2097152' | NoPSRAM='0'
debug_psram_size: '8388608'
-192
View File
@@ -1,192 +0,0 @@
# Updated : 2025.01.16
# Version : 1.5.3
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
substitutions:
name: yambms
# Don't forget to configure your WiFi credentials in the secrets.yaml file
#
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: INFO # DEBUG / INFO / WARN
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
#web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
packages:
############### >>> UNCOMMENT YOUR BOARD <<< ###############
# This list is incomplete, other board.yaml are available in the board folder
device_board: !include packages/board/board_ESP32_Generic.yaml
# device_board: !include packages/board/board_ESP32_DevKit-V1.yaml
# device_board: !include packages/board/board_ESP32_LilyGo-T-CAN485.yaml
# device_board: !include packages/board/board_ESP32-C3_ETH01-EVO.yaml
# device_board: !include packages/board/board_ESP32-S3_DevKitC-1.yaml
# device_board: !include packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml
# device_board: !include packages/board/board_ESP32-S3_AtomS3-Lite.yaml
# device_board: !include
# file: packages/board/board_ESP32-S3_AtomS3.yaml # board_ESP32-S3_AtomS3R.yaml
# vars:
# display_auto_next_page_interval: '5s'
############################################################
# Config : this YAML contains the settings shared between all ESP32s
config_yambms: !include packages/config/config_yambms.yaml
# shunt1: !include
# file: packages/shunt/shunt_combine_Victron_SmartShunt_UART.yaml # shunt_combine_Junctek_KHF_UART.yaml
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_uart_id: uart_esp_0
seplos_modbus1: !include
file: packages/bms/bms_combine_SEPLOS_V1_V2_RS485_modbus.yaml
vars:
seplos_modbus_id: 'seplos_modbus1'
seplos_modbus_uart_id: 'uart_esp_1'
seplos_modbus_baud_rate: '9600' # 9600 / 19200 ; please set the baudrate of your Seplos BMS model here
seplos_modbus_rx_timeout: '150ms'
bms1: !include
file: packages/bms/bms_combine_SEPLOS_V1_V2_RS485_bms_full.yaml
vars:
# Seplos modbus ID
seplos_modbus_id: 'seplos_modbus1'
# BMS vars
bms_id: '1' # must be a number
bms_name: 'BMS 1'
bms_address: '0x01' # BMS 1 DIP switch
bms_protocol_version: '0x20' # Known protocol versions: 0x20 (Seplos), 0x26 (Boqiang)
# Required settings cannot be retrieved from BMS
# These values ​​must match your BMS settings
# LFP values example
bms_max_charge_current: '100' # A. Used to calculate maximum charge current
bms_max_discharge_current: '100' # A. Used to calculate maximum discharge current
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
bms2: !include
file: packages/bms/bms_combine_SEPLOS_V1_V2_RS485_bms_full.yaml
vars:
# Seplos modbus ID
seplos_modbus_id: 'seplos_modbus1'
# BMS vars
bms_id: '2' # must be a number
bms_name: 'BMS 2'
bms_address: '0x02' # BMS 2 DIP switch
bms_protocol_version: '0x20' # Known protocol versions: 0x20 (Seplos), 0x26 (Boqiang)
bms_uart_id: uart_esp_2
# Required settings cannot be retrieved from BMS
# These values ​​must match your BMS settings
# LFP values example
bms_max_charge_current: '100' # A. Used to calculate maximum charge current
bms_max_discharge_current: '100' # A. Used to calculate maximum discharge current
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
yambms1: !include
file: packages/yambms/yambms.yaml
vars:
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# Maximum charging cycles is used to calculate the battey SOH, LF280K v3 =8000.0, LF280K v2 =6000.0, LF280=3000.0 (decimal is required)
yambms_max_cycles: '6000.0'
canbus1: !include
file: packages/yambms/yambms_canbus.yaml
vars:
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_node1'
canbus_light_id: 'esp_light'
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
canbus_link_timer: '5s'
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |
# +--------------------------------------+
device_debug: !include
file: packages/base/device_debug_ESP32.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'
-211
View File
@@ -1,211 +0,0 @@
# Updated : 2025.01.16
# Version : 1.5.3
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
substitutions:
name: yambms-node1
# Don't forget to configure your WiFi credentials in the secrets.yaml file
#
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: INFO # DEBUG / INFO / WARN
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
#web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
packages:
############### >>> UNCOMMENT YOUR BOARD <<< ###############
# This list is incomplete, other board.yaml are available in the board folder
# device_board: !include packages/board/board_ESP32_Generic.yaml
# device_board: !include packages/board/board_ESP32_DevKit-V1.yaml
# device_board: !include packages/board/board_ESP32_LilyGo-T-CAN485.yaml
# device_board: !include packages/board/board_ESP32-C3_ETH01-EVO.yaml
# device_board: !include packages/board/board_ESP32-S3_DevKitC-1.yaml
# device_board: !include packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml
device_board: !include packages/board/board_ESP32-S3_AtomS3-Lite.yaml
# device_board: !include
# file: packages/board/board_ESP32-S3_AtomS3.yaml # board_ESP32-S3_AtomS3R.yaml
# vars:
# display_auto_next_page_interval: '5s'
############################################################
# Config : this YAMLs contains the settings shared between all ESP32s
config_yambms: !include packages/config/config_yambms.yaml
config_multinode_modbus: !include packages/config/config_multi-node_modbus.yaml
modbus: !include
file: packages/base/device_modbus.yaml
vars:
modbus_role: 'client' # client / server
modbus_uart_id: 'uart_esp_1' # RS485 board
shunt1: !include
file: packages/shunt/shunt_combine_modbus_client.yaml
vars:
shunt_id: '1' # must be a number
shunt_name: 'Shunt 1'
bms1: !include
file: packages/bms/bms_combine_modbus_client.yaml
vars:
bms_id: '1' # must be a number
bms_name: 'BMS 1'
bms2: !include
file: packages/bms/bms_combine_modbus_client.yaml
vars:
bms_id: '2' # must be a number
bms_name: 'BMS 2'
bms3: !include
file: packages/bms/bms_combine_modbus_client.yaml
vars:
bms_id: '3' # must be a number
bms_name: 'BMS 3'
# bms4: !include
# file: packages/bms/bms_combine_modbus_client.yaml
# vars:
# bms_id: '4' # must be a number
# bms_name: 'BMS 4'
# bms5: !include
# file: packages/bms/bms_combine_modbus_client.yaml
# vars:
# bms_id: '5' # must be a number
# bms_name: 'BMS 5'
# bms6: !include
# file: packages/bms/bms_combine_modbus_client.yaml
# vars:
# bms_id: '6' # must be a number
# bms_name: 'BMS 6'
# bms7: !include
# file: packages/bms/bms_combine_modbus_client.yaml
# vars:
# bms_id: '7' # must be a number
# bms_name: 'BMS 7'
# bms8: !include
# file: packages/bms/bms_combine_modbus_client.yaml
# vars:
# bms_id: '8' # must be a number
# bms_name: 'BMS 8'
# bms9: !include
# file: packages/bms/bms_combine_modbus_client.yaml
# vars:
# bms_id: '9' # must be a number
# bms_name: 'BMS 9'
# bms10: !include
# file: packages/bms/bms_combine_modbus_client.yaml
# vars:
# bms_id: '10' # must be a number
# bms_name: 'BMS 10'
yambms1: !include
file: packages/yambms/yambms.yaml
vars:
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# Maximum charging cycles is used to calculate the battey SOH, LF280K v3 =8000.0, LF280K v2 =6000.0, LF280=3000.0 (decimal is required)
yambms_max_cycles: '6000.0'
canbus1: !include
file: packages/yambms/yambms_canbus.yaml
vars:
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_node1'
canbus_light_id: 'esp_light'
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
canbus_link_timer: '5s'
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |
# +--------------------------------------+
device_debug: !include
file: packages/base/device_debug_ESP32.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'
-124
View File
@@ -1,124 +0,0 @@
# Updated : 2025.01.16
# Version : 1.5.3
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
substitutions:
name: yambms-node2
# Don't forget to configure your WiFi credentials in the secrets.yaml file
#
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: INFO # DEBUG / INFO / WARN
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
#web_server:
# port: 80
# log: false
# ota: false
# Remove canbus_node1 (not necessary)
canbus:
- id: !remove canbus_node1
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
packages:
############### >>> UNCOMMENT YOUR BOARD <<< ###############
# This list is incomplete, other board.yaml are available in the board folder
# device_board: !include packages/board/board_ESP32_Generic.yaml
# device_board: !include packages/board/board_ESP32_DevKit-V1.yaml
# device_board: !include packages/board/board_ESP32_LilyGo-T-CAN485.yaml
# device_board: !include packages/board/board_ESP32-C3_ETH01-EVO.yaml
# device_board: !include packages/board/board_ESP32-S3_DevKitC-1.yaml
device_board: !include packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml
# device_board: !include packages/board/board_ESP32-S3_AtomS3-Lite.yaml
# device_board: !include
# file: packages/board/board_ESP32-S3_AtomS3.yaml # board_ESP32-S3_AtomS3R.yaml
# vars:
# display_auto_next_page_interval: '5s'
############################################################
# Config : this YAMLs contains the settings shared between all ESP32s
config_yambms: !include packages/config/config_yambms.yaml
config_multinode_modbus: !include packages/config/config_multi-node_modbus.yaml
modbus: !include
file: packages/base/device_modbus.yaml
vars:
modbus_role: 'server' # client / server
modbus_uart_id: 'uart_esp_1' # RS485 board
shunt1: !include
file: packages/shunt/shunt_modbus_Victron_SmartShunt_UART.yaml
vars:
shunt_id: '1' # must be a number
shunt_name: 'Shunt 1'
shunt_uart_id: 'uart_esp_2'
bms1: !include
file: packages/bms/bms_modbus_JK-B_UART_full.yaml
vars:
bms_id: '1' # must be a number
bms_name: 'JK-BMS 1'
bms_uart_id: 'uart_esp_3'
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |
# +--------------------------------------+
device_debug: !include
file: packages/base/device_debug_ESP32.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'
-127
View File
@@ -1,127 +0,0 @@
# Updated : 2025.01.16
# Version : 1.5.3
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
substitutions:
name: yambms-node2
# Don't forget to configure your WiFi credentials in the secrets.yaml file
#
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: INFO # DEBUG / INFO / WARN
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
#web_server:
# port: 80
# log: false
# ota: false
# Remove canbus_node1 (not necessary)
canbus:
- id: !remove canbus_node1
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
packages:
############### >>> UNCOMMENT YOUR BOARD <<< ###############
# This list is incomplete, other board.yaml are available in the board folder
# device_board: !include packages/board/board_ESP32_Generic.yaml
# device_board: !include packages/board/board_ESP32_DevKit-V1.yaml
# device_board: !include packages/board/board_ESP32_LilyGo-T-CAN485.yaml
# device_board: !include packages/board/board_ESP32-C3_ETH01-EVO.yaml
# device_board: !include packages/board/board_ESP32-S3_DevKitC-1.yaml
# device_board: !include packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml
device_board: !include packages/board/board_ESP32-S3_AtomS3-Lite.yaml
# device_board: !include
# file: packages/board/board_ESP32-S3_AtomS3.yaml # board_ESP32-S3_AtomS3R.yaml
# vars:
# display_auto_next_page_interval: '5s'
############################################################
# Config : this YAMLs contains the settings shared between all ESP32s
config_yambms: !include packages/config/config_yambms.yaml
config_multinode_modbus: !include packages/config/config_multi-node_modbus.yaml
modbus: !include
file: packages/base/device_modbus.yaml
vars:
modbus_role: 'server' # client / server
modbus_uart_id: 'uart_esp_1' # RS485 board
modbus_baud_rate: '19200' # 9600 / 19200 / 115200
bms2: !include
file: packages/bms/bms_modbus_JK-ALL_BLE_standard.yaml
vars:
bms_id: '2' # must be a number, also represents the modbus server number !
bms_name: 'JK-BMS 2'
bms_ble_protocol_version: JK02_32S # JK02_24S < hardware version 11.0 >= JK02_32S
bms_ble_mac_address: C8:47:8C:10:7E:AA
bms3: !include
file: packages/bms/bms_modbus_JK-ALL_BLE_standard.yaml
vars:
bms_id: '3' # must be a number, also represents the modbus server number !
bms_name: 'JK-BMS 3'
bms_ble_protocol_version: JK02_32S # JK02_24S < hardware version 11.0 >= JK02_32S
bms_ble_mac_address: C8:47:8C:EE:16:EA
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |
# +--------------------------------------+
device_debug: !include
file: packages/base/device_debug_ESP32.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'
-161
View File
@@ -1,161 +0,0 @@
# Updated : 2025.01.16
# Version : 1.5.3
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
substitutions:
name: yambms
# Don't forget to configure your WiFi credentials in the secrets.yaml file
#
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: DEBUG # DEBUG / INFO / WARN
logs:
esp32_ble_tracker: INFO
esp32_ble_client: INFO
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
#web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
# Max 3 BLE connections.
# The BLE software stack (Bluedroid) on the ESP32 consumes a significant amount of RAM on the device.
# Crashes are likely to occur if you include too many additional components in your device’s configuration.
# https://esphome.io/components/ble_client.html
packages:
############### >>> UNCOMMENT YOUR BOARD <<< ###############
# This list is incomplete, other board.yaml are available in the board folder
device_board: !include packages/board/board_ESP32_Generic.yaml
# device_board: !include packages/board/board_ESP32_DevKit-V1.yaml
# device_board: !include packages/board/board_ESP32_LilyGo-T-CAN485.yaml
# device_board: !include packages/board/board_ESP32-C3_ETH01-EVO.yaml
# device_board: !include packages/board/board_ESP32-S3_DevKitC-1.yaml
# device_board: !include packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml
# device_board: !include packages/board/board_ESP32-S3_AtomS3-Lite.yaml
# device_board: !include
# file: packages/board/board_ESP32-S3_AtomS3.yaml # board_ESP32-S3_AtomS3R.yaml
# vars:
# display_auto_next_page_interval: '5s'
############################################################
# Config : this YAML contains the settings shared between all ESP32s
config_yambms: !include packages/config/config_yambms.yaml
# shunt1: !include
# file: packages/shunt/shunt_combine_Victron_SmartShunt_UART.yaml # shunt_combine_Junctek_KHF_UART.yaml
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_uart_id: uart_esp_0
bms1: !include
file: packages/bms/bms_combine_JK-ALL_BLE_standard.yaml
vars:
bms_id: '1' # must be a number
bms_name: 'JK-BMS 1'
bms_ble_protocol_version: 'JK02_32S' # JK02_24S < hardware version 11.0 >= JK02_32S
bms_ble_mac_address: 'C8:47:8C:10:7E:AA'
yambms1: !include
file: packages/yambms/yambms.yaml
vars:
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# Maximum charging cycles is used to calculate the battey SOH, LF280K v3 =8000.0, LF280K v2 =6000.0, LF280=3000.0 (decimal is required)
yambms_max_cycles: '6000.0'
canbus1: !include
file: packages/yambms/yambms_canbus.yaml
vars:
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_node1'
canbus_light_id: 'esp_light'
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
canbus_link_timer: '5s'
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |
# +--------------------------------------+
device_debug: !include
file: packages/base/device_debug_ESP32.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'
-152
View File
@@ -1,152 +0,0 @@
# Updated : 2025.01.16
# Version : 1.5.3
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
substitutions:
name: yambms
# Don't forget to configure your WiFi credentials in the secrets.yaml file
#
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: INFO # DEBUG / INFO / WARN
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
#web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
packages:
############### >>> UNCOMMENT YOUR BOARD <<< ###############
# This list is incomplete, other board.yaml are available in the board folder
device_board: !include packages/board/board_ESP32_Generic.yaml
# device_board: !include packages/board/board_ESP32_DevKit-V1.yaml
# device_board: !include packages/board/board_ESP32_LilyGo-T-CAN485.yaml
# device_board: !include packages/board/board_ESP32-C3_ETH01-EVO.yaml
# device_board: !include packages/board/board_ESP32-S3_DevKitC-1.yaml
# device_board: !include packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml
# device_board: !include packages/board/board_ESP32-S3_AtomS3-Lite.yaml
# device_board: !include
# file: packages/board/board_ESP32-S3_AtomS3.yaml # board_ESP32-S3_AtomS3R.yaml
# vars:
# display_auto_next_page_interval: '5s'
############################################################
# Config : this YAML contains the settings shared between all ESP32s
config_yambms: !include packages/config/config_yambms.yaml
# shunt1: !include
# file: packages/shunt/shunt_combine_Victron_SmartShunt_UART.yaml # shunt_combine_Junctek_KHF_UART.yaml
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_uart_id: uart_esp_0
bms1: !include
file: packages/bms/bms_combine_JK-B_UART_full.yaml
vars:
bms_id: '1' # must be a number
bms_name: 'JK-BMS 1'
bms_uart_id: 'uart_esp_1'
yambms1: !include
file: packages/yambms/yambms.yaml
vars:
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# Maximum charging cycles is used to calculate the battey SOH, LF280K v3 =8000.0, LF280K v2 =6000.0, LF280=3000.0 (decimal is required)
yambms_max_cycles: '6000.0'
canbus1: !include
file: packages/yambms/yambms_canbus.yaml
vars:
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_node1'
canbus_light_id: 'esp_light'
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
canbus_link_timer: '5s'
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |
# +--------------------------------------+
device_debug: !include
file: packages/base/device_debug_ESP32.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'
-174
View File
@@ -1,174 +0,0 @@
# Updated : 2025.01.16
# Version : 1.5.3
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
substitutions:
name: yambms
# Don't forget to configure your WiFi credentials in the secrets.yaml file
#
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: INFO # DEBUG / INFO / WARN
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
#web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
packages:
############### >>> UNCOMMENT YOUR BOARD <<< ###############
# This list is incomplete, other board.yaml are available in the board folder
# device_board: !include packages/board/board_ESP32_Generic.yaml
# device_board: !include packages/board/board_ESP32_DevKit-V1.yaml
device_board: !include packages/board/board_ESP32_LilyGo-T-CAN485.yaml
# device_board: !include packages/board/board_ESP32-C3_ETH01-EVO.yaml
# device_board: !include packages/board/board_ESP32-S3_DevKitC-1.yaml
# device_board: !include packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml
# device_board: !include packages/board/board_ESP32-S3_AtomS3-Lite.yaml
# device_board: !include
# file: packages/board/board_ESP32-S3_AtomS3.yaml # board_ESP32-S3_AtomS3R.yaml
# vars:
# display_auto_next_page_interval: '5s'
############################################################
# Config : this YAML contains the settings shared between all ESP32s
config_yambms: !include packages/config/config_yambms.yaml
# shunt1: !include
# file: packages/shunt/shunt_combine_Victron_SmartShunt_UART.yaml # shunt_combine_Junctek_KHF_UART.yaml
# vars:
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_uart_id: uart_esp_0
# The sniffer represents the ESP node connected to the JK-BMS PB RS485 bus
# If address 0x00 is not detected on the RS485 bus, the sniffer will act directly as a master BMS (mode 2, max 15 BMS)
# sniffer1: !include
# file: packages/bms/bms_combine_JK-PB_RS485_sniffer_talk_pin.yaml
# vars:
# sniffer_id: 'sniffer1'
# sniffer_protocol: 'JK02_32S'
# sniffer_uart_id: 'uart_esp_1'
# sniffer_talk_pin: 8 # ESP32: 4, ESP32-S3: 8, ESP32-C3: 10
sniffer1: !include
file: packages/bms/bms_combine_JK-PB_RS485_sniffer.yaml
vars:
sniffer_id: 'sniffer1'
sniffer_protocol: 'JK02_32S'
sniffer_uart_id: 'uart_esp_1'
# Mode2 : configure the DIP switches of your BMS from 0x01 to 0x0F (don't use the 0x00 address, maximum 15 BMS)
bms1: !include
file: packages/bms/bms_combine_JK-PB_RS485_bms_full.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '1' # must be a number
bms_name: 'JK-BMS 1'
bms_address: '0x01' # BMS 1 DIP switch
yambms1: !include
file: packages/yambms/yambms.yaml
vars:
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# Maximum charging cycles is used to calculate the battey SOH, LF280K v3 =8000.0, LF280K v2 =6000.0, LF280=3000.0 (decimal is required)
yambms_max_cycles: '6000.0'
canbus1: !include
file: packages/yambms/yambms_canbus.yaml
vars:
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_node1'
canbus_light_id: 'esp_light'
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
canbus_link_timer: '5s'
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |
# +--------------------------------------+
device_debug: !include
file: packages/base/device_debug_ESP32.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'
+5 -15
View File
@@ -1,5 +1,5 @@
# Updated : 2025.03.21
# Version : 1.5.4
# Updated : 2025.06.12
# Version : 1.5.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -17,18 +17,8 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
substitutions:
yambms_version: "1.5.4"
esphome:
name: ${name}
# friendly_name: ${name}
# comment: 'Solar system braining and more !'
# area: 'Technical local'
project:
name: Sleeper85.YamBMS
version: ${yambms_version}
min_version: 2025.3.0
packages:
device_base_esphome: !include device_base_esphome.yaml
time:
# https://esphome.io/components/time/homeassistant
@@ -43,7 +33,7 @@ button:
entity_category: config
binary_sensor:
# https://esphome.io/components/binary_sensor/status
# https://esphome.io/components/binary_sensor/status
- platform: status
name: ${name} ESP32 Online Status
id: esp32_online_status
+31
View File
@@ -0,0 +1,31 @@
# Updated : 2025.06.12
# Version : 1.5.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
substitutions:
yambms_version: "1.5.6"
esphome:
name: ${hostname}
friendly_name: ${friendly_name}
# comment: 'Solar system braining and more !'
# area: 'Technical local'
project:
name: Sleeper85.YamBMS
version: ${yambms_version}
min_version: 2025.5.0
+3 -3
View File
@@ -1,5 +1,5 @@
# Updated : 2025.01.20
# Version : 1.5.3
# Updated : 2025.06.10
# Version : 1.5.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -18,7 +18,7 @@
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
sensor:
# https://esphome.io/components/sensor/wifi_signal
# https://esphome.io/components/sensor/wifi_signal
- platform: wifi_signal
name: ${name} ESP32 WiFi power
id: esp32_wifi_power
+64 -7
View File
@@ -1,5 +1,5 @@
# Updated : 2025.01.25
# Version : 1.2.2
# Updated : 2025.06.15
# Version : 1.2.4
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -17,8 +17,21 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
# packages:
# bms_charging_logic: !include bms_options_charging_logic.yaml
number:
# +--------------------------------------+
# | Charging Cycles Offset |
# +--------------------------------------+
- platform: template
name: "${name} ${bms_name} Charging Cycles Offset"
id: bms${bms_id}_charging_cycles_offset
step: 1
min_value: 0
max_value: 3000
initial_value: 0
restore_value: true
icon: mdi:counter
optimistic: true
entity_category: config
sensor:
# +--------------------------------------+
@@ -28,8 +41,8 @@ sensor:
name: "${name} ${bms_name} Daily Charging Energy"
power_id: bms${bms_id}_charging_power
unit_of_measurement: 'kWh'
state_class: total_increasing
device_class: energy
state_class: total_increasing
accuracy_decimals: 3
filters:
# Multiplication factor from W to kW is 0.001
@@ -38,19 +51,22 @@ sensor:
name: "${name} ${bms_name} Daily Discharging Energy"
power_id: bms${bms_id}_discharging_power
unit_of_measurement: 'kWh'
state_class: total_increasing
device_class: energy
state_class: total_increasing
accuracy_decimals: 3
filters:
# Multiplication factor from W to kW is 0.001
- multiply: 0.001
# +--------------------------------------+
# | Battery State of Charge (SOC) |
# +--------------------------------------+
- platform: template
name: ${name} ${bms_name} Battery SoC
id: bms${bms_id}_battery_soc
update_interval: ${bms_update_interval}
unit_of_measurement: "%"
device_class: battery
update_interval: ${bms_update_interval}
accuracy_decimals: 0
filters:
- or:
@@ -64,3 +80,44 @@ sensor:
if (min_cell_v <= cell_low_v) return 0; // Real 0% => return 0%
else if (soc < 1) return 2; // False 0% => return 2%
else return soc; // Else => return BMS SoC
# +--------------------------------------+
# | Charging Cycles |
# +--------------------------------------+
- platform: template
name: "${name} ${bms_name} charging cycles"
id: bms${bms_id}_charging_cycles
update_interval: ${bms_update_interval}
state_class: total
icon: mdi:counter
accuracy_decimals: 0
filters:
- or:
- throttle: 10s
- delta: 1
lambda: |-
float cycles_raw = id(bms${bms_id}_charging_cycles_raw).state;
if (isnan(cycles_raw)) cycles_raw = 0;
return cycles_raw + id(bms${bms_id}_charging_cycles_offset).state;
# +--------------------------------------+
# | Charging Cycle Capacity |
# +--------------------------------------+
- platform: template
name: "${name} ${bms_name} total charging cycle capacity"
id: bms${bms_id}_cycle_capacity
update_interval: ${bms_update_interval}
unit_of_measurement: Ah
state_class: total
icon: mdi:car-battery
accuracy_decimals: 0
filters:
- or:
- throttle: 10s
- delta: 1
lambda: |-
float capacity_raw = id(bms${bms_id}_cycle_capacity_raw).state;
if (isnan(capacity_raw)) capacity_raw = 0;
return capacity_raw +
id(bms${bms_id}_charging_cycles_offset).state *
id(bms${bms_id}_battery_capacity).state;
@@ -1,4 +1,4 @@
# Updated : 2025.01.25
# Updated : 2025.06.10
# Version : 1.1.2
# GitHub : https://github.com/Sleeper85/esphome-yambms
@@ -17,15 +17,19 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
substitutions:
# YamBMS settings
yambms_id: 'yambms1'
yambms_name: 'YamBMS 1'
# Shunt settings
shunt_update_interval: '3s' # frequency at which Shunt data is refreshed
shunt_combine_interval: '1s' # frequency at which data is combined in YamBMS
# BMS settings
bms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
bms_update_interval: '3s' # frequency at which BMS data is refreshed, going below '3s' can cause problems
bms_combine_interval: '1s' # frequency at which data is combined in YamBMS
bms_cutoff_timer: '60s'
sensor:
# +--------------------------------------+
# | Battery State of Health (SOH) |
# +--------------------------------------+
- platform: template
name: ${name} ${bms_name} Battery SoH
id: bms${bms_id}_battery_soh
unit_of_measurement: "%"
device_class: battery
update_interval: ${bms_update_interval}
accuracy_decimals: 0
filters:
- or:
- throttle: 10s
- delta: 1
lambda: return round(((id(bms${bms_id}_charging_cycles).state/${bms_cell_max_cycles})-1)*-100);
+13 -10
View File
@@ -1,5 +1,5 @@
# Updated : 2025.01.24
# Version : 1.5.4
# Updated : 2025.06.10
# Version : 1.5.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# This YAML is free software: you can redistribute it and/or
@@ -107,10 +107,10 @@ interval:
// TOTAL total_voltage
id(${yambms_id}_var_bms_total_voltage) += id(bms${bms_id}_total_voltage).state;
// TOTAL current
id(${yambms_id}_var_bms_total_current) += id(bms${bms_id}_current).state;
// TOTAL power
id(${yambms_id}_var_bms_total_power) += id(bms${bms_id}_power).state;
@@ -121,19 +121,22 @@ interval:
id(${yambms_id}_var_total_capacity_remaining_ah) += id(bms${bms_id}_capacity_remaining_ah).state;
// TOTAL SoC
id(${yambms_id}_var_bms_total_soc) += id(bms${bms_id}_battery_soc).state;
// id(${yambms_id}_var_bms_total_soc) += id(bms${bms_id}_battery_soc).state;
// TOTAL SoH
id(${yambms_id}_var_bms_total_soh) += id(bms${bms_id}_battery_soh).state;
// TOTAL charging_cycles
id(${yambms_id}_var_total_charging_cycles) += id(bms${bms_id}_charging_cycles).state;
// TOTAL equalizing_counter
if (id(bms${bms_id}_equalizing).state) id(${yambms_id}_var_equalizing_counter) += 1;
// MIN/MAX values
// MAX balance_trigger_voltage
if (id(bms${bms_id}_balance_trigger_voltage).state > id(${yambms_id}_var_max_balance_trigger_voltage))
id(${yambms_id}_var_max_balance_trigger_voltage) = id(bms${bms_id}_balance_trigger_voltage).state;
// MIN min_cell_voltage
// MIN min_voltage_cell (cell number)
if (id(bms${bms_id}_min_cell_voltage).state < id(${yambms_id}_var_min_cell_voltage))
@@ -149,11 +152,11 @@ interval:
id(${yambms_id}_var_max_cell_voltage) = id(bms${bms_id}_max_cell_voltage).state;
id(${yambms_id}_var_max_voltage_cell) = id(bms${bms_id}_max_voltage_cell).state + (${bms_id} * 100);
}
// MIN cell_ovp
if (id(bms${bms_id}_cell_ovp).state < id(${yambms_id}_var_min_cell_ovp))
id(${yambms_id}_var_min_cell_ovp) = id(bms${bms_id}_cell_ovp).state;
// MAX cell_uvp
if (id(bms${bms_id}_cell_uvp).state > id(${yambms_id}_var_max_cell_uvp))
id(${yambms_id}_var_max_cell_uvp) = id(bms${bms_id}_cell_uvp).state;
@@ -0,0 +1,38 @@
# Updated : 2025.06.17
# Version : 1.1.2
# GitHub : https://github.com/txubelaxu/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
substitutions:
bms_model: "BASEN"
bms_protocol: "RS485"
# +--------------------------------------+
# | Component settings |
# +--------------------------------------+
external_components:
- source: github://GHswitt/esphome-basen@main
refresh: 0s
uart:
- id: !extend ${basen_uart_id}
baud_rate: ${basen_uart_baud_rate}
basen_controller:
- uart_id: ${basen_uart_id}
id: ${basen_controller_id}
@@ -1,4 +1,4 @@
# Updated : 2025.03.30
# Updated : 2025.06.01
# Version : 1.1.1
# GitHub : https://github.com/syssi/esphome-jk-bms
@@ -18,5 +18,5 @@
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
packages:
bms_sensors: !include bms_sensors_JK-PB_RS485_bms_full.yaml
bms_sensors: !include bms_sensors_BASEN_RS485_full.yaml
bms_combine: !include bms_combine.yaml
@@ -0,0 +1,26 @@
# Updated : 2025.06.11
# Version : 1.1.2
# GitHub : https://github.com/GHswitt/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
substitutions:
bms_model: "DEYE"
bms_protocol: "CAN"
packages:
bms_module: !include bms_sensors_DEYE_CAN_module_full.yaml
bms_combine: !include bms_combine.yaml
@@ -0,0 +1,26 @@
# Updated : 2025.06.11
# Version : 1.1.2
# GitHub : https://github.com/GHswitt/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
substitutions:
bms_model: "DEYE"
bms_protocol: "CAN"
packages:
bms_module: !include bms_sensors_DEYE_CAN_module_minimal.yaml
bms_combine: !include bms_combine.yaml
@@ -1,5 +1,5 @@
# Updated : 2025.01.28
# Version : 1.2.6
# Updated : 2025.06.11
# Version : 1.2.8
# GitHub : https://github.com/syssi/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -25,14 +25,15 @@ packages:
bms_base: !include bms_base.yaml
bms_combine: !include bms_combine.yaml
bms_temperature_sensor: !include bms_temperature_sensor_2.yaml
bms_errors_bitmask: !include bms_errors_bitmask_JK-ALL_BLE.yaml
bms_errors_bitmask: !include bms_errors_bitmask_JK_BLE.yaml
bms_battery_soh: !include bms_battery_soh.yaml
ota:
on_begin:
then:
- switch.turn_off: bms${bms_id}_enable_bluetooth_connection
- logger.log: "BLE shutdown for flashing"
# +--------------------------------------+
# | Component settings |
# +--------------------------------------+
@@ -285,9 +286,12 @@ sensor:
id: bms${bms_id}_battery_capacity
name: "${name} ${bms_name} total battery capacity setting"
charging_cycles:
id: bms${bms_id}_charging_cycles
id: bms${bms_id}_charging_cycles_raw
internal: true
name: "${name} ${bms_name} charging cycles"
total_charging_cycle_capacity:
id: bms${bms_id}_cycle_capacity_raw
internal: true
name: "${name} ${bms_name} total charging cycle capacity"
total_runtime:
name: "${name} ${bms_name} total runtime"
@@ -320,7 +324,7 @@ sensor:
name: "${name} ${bms_name} heating current"
# Commits 2024.07.07 : Improve the support of the JK-PBs series (ALL)
balancing:
name: "${name} ${bms_name} balancing"
name: "${name} ${bms_name} balancing"
text_sensor:
- platform: jk_bms_ble
@@ -1,5 +1,5 @@
# Updated : 2025.01.28
# Version : 1.2.6
# Updated : 2025.06.11
# Version : 1.2.8
# GitHub : https://github.com/syssi/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -25,14 +25,15 @@ packages:
bms_base: !include bms_base.yaml
bms_combine: !include bms_combine.yaml
bms_temperature_sensor: !include bms_temperature_sensor_2.yaml
bms_errors_bitmask: !include bms_errors_bitmask_JK-ALL_BLE.yaml
bms_errors_bitmask: !include bms_errors_bitmask_JK_BLE.yaml
bms_battery_soh: !include bms_battery_soh.yaml
ota:
on_begin:
then:
- switch.turn_off: bms${bms_id}_enable_bluetooth_connection
- logger.log: "BLE shutdown for flashing"
# +--------------------------------------+
# | Component settings |
# +--------------------------------------+
@@ -280,9 +281,12 @@ sensor:
id: bms${bms_id}_battery_capacity
name: "${name} ${bms_name} total battery capacity setting"
charging_cycles:
id: bms${bms_id}_charging_cycles
id: bms${bms_id}_charging_cycles_raw
internal: true
name: "${name} ${bms_name} charging cycles"
total_charging_cycle_capacity:
id: bms${bms_id}_cycle_capacity_raw
internal: true
name: "${name} ${bms_name} total charging cycle capacity"
total_runtime:
name: "${name} ${bms_name} total runtime"
@@ -1,5 +1,5 @@
# Updated : 2025.01.28
# Version : 1.2.6
# Updated : 2025.06.11
# Version : 1.2.8
# GitHub : https://github.com/syssi/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -25,14 +25,15 @@ packages:
bms_base: !include bms_base.yaml
bms_combine: !include bms_combine.yaml
bms_temperature_sensor: !include bms_temperature_sensor_2.yaml
bms_errors_bitmask: !include bms_errors_bitmask_JK-ALL_BLE.yaml
bms_errors_bitmask: !include bms_errors_bitmask_JK_BLE.yaml
bms_battery_soh: !include bms_battery_soh.yaml
ota:
on_begin:
then:
- switch.turn_off: bms${bms_id}_enable_bluetooth_connection
- logger.log: "BLE shutdown for flashing"
# +--------------------------------------+
# | Component settings |
# +--------------------------------------+
@@ -160,9 +161,12 @@ sensor:
id: bms${bms_id}_battery_capacity
name: "${name} ${bms_name} total battery capacity setting"
charging_cycles:
id: bms${bms_id}_charging_cycles
id: bms${bms_id}_charging_cycles_raw
internal: true
name: "${name} ${bms_name} charging cycles"
total_charging_cycle_capacity:
id: bms${bms_id}_cycle_capacity_raw
internal: true
name: "${name} ${bms_name} total charging cycle capacity"
balancing_current:
name: "${name} ${bms_name} balancing current"
@@ -1,5 +1,5 @@
# Updated : 2024.12.23
# Version : 1.1.1
# Updated : 2024.04.01
# Version : 1.1.2
# GitHub : https://github.com/syssi/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -22,5 +22,5 @@ substitutions:
bms_protocol: "BLE"
packages:
bms_sensors: !include bms_sensors_JK-ALL_BLE_standard.yaml
bms_sensors: !include bms_sensors_JK_BLE_standard.yaml
bms_combine: !include bms_combine.yaml
@@ -1,5 +1,5 @@
# Updated : 2025.01.16
# Version : 1.1.2
# Updated : 2025.06.11
# Version : 1.1.4
# GitHub : https://github.com/syssi/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -18,13 +18,14 @@
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
substitutions:
bms_model: "JK-B"
bms_model: "JK"
bms_protocol: "DISPLAY"
packages:
bms_base: !include bms_base.yaml
bms_combine: !include bms_combine.yaml
bms_temperature_sensor: !include bms_temperature_sensor_2.yaml
bms_battery_soh: !include bms_battery_soh.yaml
# +--------------------------------------+
# | DISPLAY port schematic |
@@ -326,7 +327,8 @@ sensor:
# FAKE charging_cycles
- platform: template
id: bms${bms_id}_charging_cycles
id: bms${bms_id}_charging_cycles_raw
internal: true
name: "${name} ${bms_name} charging cycles"
update_interval: ${bms_update_interval}
accuracy_decimals: 0
@@ -337,6 +339,23 @@ sensor:
- delta: 1
lambda: return 0;
# FAKE cycle capacity
- platform: template
name: "${name} ${bms_name} charging cycle capacity"
id: "bms${bms_id}_cycle_capacity_raw"
internal: true
update_interval: ${bms_update_interval}
unit_of_measurement: Ah
state_class: 'measurement'
accuracy_decimals: 0
icon: mdi:car-battery
filters:
- or:
- throttle: 600s
- delta: 1
lambda: |-
return id(bms${bms_id}_charging_cycles_raw).state * id(bms${bms_id}_battery_capacity).state;
# FAKE errors_bitmask
# Alarm management is not supported at this time
# Internal : only specifying an id without a name will implicitly set this to true.
@@ -1,4 +1,4 @@
# Updated : 2025.03.30
# Updated : 2025.04.21
# Version : 1.1.1
# GitHub : https://github.com/syssi/esphome-jk-bms
@@ -18,5 +18,5 @@
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
packages:
bms_sensors: !include bms_sensors_JK-PB_RS485_bms_standard.yaml
bms_sensors: !include bms_sensors_JK_RS485_Modbus_JK-B_standard.yaml
bms_combine: !include bms_combine.yaml
@@ -0,0 +1,22 @@
# Updated : 2025.04.01
# Version : 1.1.2
# GitHub : https://github.com/syssi/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
packages:
bms_sensors: !include bms_sensors_JK_RS485_Modbus_bms_full.yaml
bms_combine: !include bms_combine.yaml
@@ -1,5 +1,5 @@
# Updated : 2025.01.25
# Version : 1.2.4
# Updated : 2025.06.11
# Version : 1.2.6
# GitHub : https://github.com/txubelaxu/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -21,7 +21,7 @@ packages:
bms_base: !include bms_base.yaml
bms_combine: !include bms_combine.yaml
bms_temperature_sensor: !include bms_temperature_sensor_5.yaml
bms_errors_bitmask: !include bms_errors_bitmask_JK-PB_RS485.yaml
bms_errors_bitmask: !include bms_errors_bitmask_JK_RS485_Modbus.yaml
# +--------------------------------------+
# | Component settings |
@@ -162,9 +162,12 @@ sensor:
id: bms${bms_id}_capacity_remaining_ah
name: "${name} ${bms_name} battery capacity remaining"
charging_cycles:
id: bms${bms_id}_charging_cycles
id: bms${bms_id}_charging_cycles_raw
internal: true
name: "${name} ${bms_name} charging cycles"
battery_capacity_total_charging_cycle:
id: bms${bms_id}_cycle_capacity_raw
internal: true
name: "${name} ${bms_name} battery capacity total charging cycle"
battery_total_runtime:
name: "${name} ${bms_name} battery total runtime"
@@ -175,15 +178,16 @@ sensor:
name: "${name} ${bms_name} errors bitmask"
cell_count_real:
name: "${name} ${bms_name} cell count real"
battery_total_alarms_count:
battery_total_alarms_count:
name: "${name} ${bms_name} battery total alarms count"
battery_total_alarms_active:
battery_total_alarms_active:
name: "${name} ${bms_name} battery total alarms active"
uart1_protocol_number:
name: "${name} ${bms_name} uart1 protocol number"
uart2_protocol_number:
name: "${name} ${bms_name} uart2 protocol number"
battery_soh_valuation:
battery_soh_valuation:
id: bms${bms_id}_battery_soh
name: "${name} ${bms_name} battery soh valuation"
text_sensor:
@@ -212,7 +216,7 @@ text_sensor:
info_device_serial_number:
name: "${name} ${bms_name} info device serial number"
info_device_setup_passcode:
name: "${name} ${bms_name} info device setup passcode"
name: "${name} ${bms_name} info device setup passcode"
number:
- platform: jk_rs485_bms
@@ -230,7 +234,7 @@ number:
name: "${name} ${bms_name} max charging current"
max_discharging_current:
id: bms${bms_id}_max_discharge_current
name: "${name} ${bms_name} max discharging current"
name: "${name} ${bms_name} max discharging current"
cell_overvoltage_protection:
id: bms${bms_id}_cell_ovp
name: "${name} ${bms_name} cell overvoltage protection"
@@ -255,4 +259,4 @@ number:
id: bms${bms_id}_cell_uvpr
name: "${name} ${bms_name} cell undervoltage protection recovery"
cell_power_off_voltage:
name: "${name} ${bms_name} cell power off voltage"
name: "${name} ${bms_name} cell power off voltage"
@@ -0,0 +1,22 @@
# Updated : 2025.04.01
# Version : 1.1.2
# GitHub : https://github.com/syssi/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
packages:
bms_sensors: !include bms_sensors_JK_RS485_Modbus_bms_standard.yaml
bms_combine: !include bms_combine.yaml
@@ -1,5 +1,5 @@
# Updated : 2025.01.25
# Version : 1.2.7
# Updated : 2025.06.10
# Version : 1.2.9
# GitHub : https://github.com/txubelaxu/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -18,7 +18,7 @@
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
substitutions:
bms_model: "JK-PB"
bms_model: "JK"
bms_protocol: "RS485"
logger:
@@ -54,6 +54,6 @@ switch:
optimistic: true
entity_category: config
turn_on_action:
- lambda: id(${sniffer_id}).set_broadcast_changes_to_all_bms(true);
- lambda: id(${sniffer_id}).set_broadcast_changes_to_all_bms(true);
turn_off_action:
- lambda: id(${sniffer_id}).set_broadcast_changes_to_all_bms(false);
- lambda: id(${sniffer_id}).set_broadcast_changes_to_all_bms(false);
@@ -1,5 +1,5 @@
# Updated : 2025.01.25
# Version : 1.2.7
# Updated : 2025.06.10
# Version : 1.2.9
# GitHub : https://github.com/txubelaxu/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -18,7 +18,7 @@
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
substitutions:
bms_model: "JK-PB"
bms_model: "JK"
bms_protocol: "RS485"
logger:
@@ -42,7 +42,7 @@ jk_rs485_sniffer:
rx_timeout: 500ms
uart_id: ${sniffer_uart_id}
talk_pin: ${sniffer_talk_pin}
# +--------------------------------------+
# | Component entities |
# +--------------------------------------+
@@ -55,6 +55,6 @@ switch:
optimistic: true
entity_category: config
turn_on_action:
- lambda: id(${sniffer_id}).set_broadcast_changes_to_all_bms(true);
- lambda: id(${sniffer_id}).set_broadcast_changes_to_all_bms(true);
turn_off_action:
- lambda: id(${sniffer_id}).set_broadcast_changes_to_all_bms(false);
- lambda: id(${sniffer_id}).set_broadcast_changes_to_all_bms(false);
@@ -1,5 +1,5 @@
# Updated : 2024.12.23
# Version : 1.1.1
# Updated : 2025.04.01
# Version : 1.1.2
# GitHub : https://github.com/syssi/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -18,9 +18,9 @@
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
substitutions:
bms_model: "JK-B"
bms_protocol: "UART"
bms_model: "JK"
bms_protocol: "UART 4G-GPS"
packages:
bms_sensors: !include bms_sensors_JK-B_UART_full.yaml
bms_sensors: !include bms_sensors_JK_UART_4G-GPS_full.yaml
bms_combine: !include bms_combine.yaml
@@ -1,5 +1,5 @@
# Updated : 2025.01.25
# Version : 1.2.6
# Updated : 2025.06.11
# Version : 1.2.9
# GitHub : https://github.com/syssi/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -18,14 +18,15 @@
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
substitutions:
bms_model: "JK-B"
bms_protocol: "UART"
bms_model: "JK"
bms_protocol: "UART 4G-GPS"
packages:
bms_base: !include bms_base.yaml
bms_combine: !include bms_combine.yaml
bms_temperature_sensor: !include bms_temperature_sensor_2.yaml
bms_errors_bitmask: !include bms_errors_bitmask_JK-B_UART.yaml
bms_errors_bitmask: !include bms_errors_bitmask_JK_UART_4G-GPS.yaml
bms_battery_soh: !include bms_battery_soh.yaml
# +--------------------------------------+
# | Component settings |
@@ -135,9 +136,12 @@ sensor:
name: "${name} ${bms_name} temperature sensors"
entity_category: diagnostic
charging_cycles:
id: bms${bms_id}_charging_cycles
id: bms${bms_id}_charging_cycles_raw
internal: true
name: "${name} ${bms_name} charging cycles"
total_charging_cycle_capacity:
id: bms${bms_id}_cycle_capacity_raw
internal: true
name: "${name} ${bms_name} total charging cycle capacity"
battery_strings:
id: bms${bms_id}_cell_count
@@ -1,5 +1,5 @@
# Updated : 2025.01.16
# Version : 1.1.2
# Updated : 2025.06.16
# Version : 1.1.1
# GitHub : https://github.com/syssi/esphome-seplos-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -17,238 +17,6 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
substitutions:
bms_model: "Seplos V1 V2"
bms_protocol: "RS485"
packages:
bms_base: !include bms_base.yaml
bms_sensors: !include bms_sensors_SEPLOS_V1_V2_RS485_bms_full.yaml
bms_combine: !include bms_combine.yaml
bms_temperature_sensor: !include bms_temperature_sensor_4.yaml
# +--------------------------------------+
# | Component settings |
# +--------------------------------------+
external_components:
- source: github://syssi/esphome-seplos-bms@main
refresh: 0s
seplos_bms:
- id: seplos_bms${bms_id}
address: ${bms_address}
protocol_version: ${bms_protocol_version}
seplos_modbus_id: ${seplos_modbus_id}
update_interval: ${bms_update_interval}
# +--------------------------------------+
# | Component entities |
# +--------------------------------------+
sensor:
- platform: seplos_bms
seplos_bms_id: seplos_bms${bms_id}
min_cell_voltage:
id: bms${bms_id}_min_cell_voltage
name: "${name} ${bms_name} min cell voltage"
max_cell_voltage:
id: bms${bms_id}_max_cell_voltage
name: "${name} ${bms_name} max cell voltage"
min_voltage_cell:
id: bms${bms_id}_min_voltage_cell
name: "${name} ${bms_name} min voltage cell"
max_voltage_cell:
id: bms${bms_id}_max_voltage_cell
name: "${name} ${bms_name} max voltage cell"
delta_cell_voltage:
name: "${name} ${bms_name} delta cell voltage"
average_cell_voltage:
id: bms${bms_id}_average_cell_voltage
name: "${name} ${bms_name} average cell voltage"
cell_voltage_1:
name: "${name} ${bms_name} cell voltage 01"
cell_voltage_2:
name: "${name} ${bms_name} cell voltage 02"
cell_voltage_3:
name: "${name} ${bms_name} cell voltage 03"
cell_voltage_4:
name: "${name} ${bms_name} cell voltage 04"
cell_voltage_5:
name: "${name} ${bms_name} cell voltage 05"
cell_voltage_6:
name: "${name} ${bms_name} cell voltage 06"
cell_voltage_7:
name: "${name} ${bms_name} cell voltage 07"
cell_voltage_8:
name: "${name} ${bms_name} cell voltage 08"
cell_voltage_9:
name: "${name} ${bms_name} cell voltage 09"
cell_voltage_10:
name: "${name} ${bms_name} cell voltage 10"
cell_voltage_11:
name: "${name} ${bms_name} cell voltage 11"
cell_voltage_12:
name: "${name} ${bms_name} cell voltage 12"
cell_voltage_13:
name: "${name} ${bms_name} cell voltage 13"
cell_voltage_14:
name: "${name} ${bms_name} cell voltage 14"
cell_voltage_15:
name: "${name} ${bms_name} cell voltage 15"
cell_voltage_16:
name: "${name} ${bms_name} cell voltage 16"
temperature_1:
id: bms${bms_id}_temperature_sensor_1
name: "${name} ${bms_name} temperature 1"
temperature_2:
id: bms${bms_id}_temperature_sensor_2
name: "${name} ${bms_name} temperature 2"
temperature_3:
id: bms${bms_id}_temperature_sensor_3
name: "${name} ${bms_name} temperature 3"
temperature_4:
id: bms${bms_id}_temperature_sensor_4
name: "${name} ${bms_name} temperature 4"
temperature_5:
name: "${name} ${bms_name} environment temperature"
temperature_6:
name: "${name} ${bms_name} mosfet temperature"
total_voltage:
id: bms${bms_id}_total_voltage
name: "${name} ${bms_name} total voltage"
current:
id: bms${bms_id}_current
name: "${name} ${bms_name} current"
power:
id: bms${bms_id}_power
name: "${name} ${bms_name} power"
charging_power:
id: bms${bms_id}_charging_power
name: "${name} ${bms_name} charging power"
discharging_power:
id: bms${bms_id}_discharging_power
name: "${name} ${bms_name} discharging power"
residual_capacity:
id: bms${bms_id}_capacity_remaining_ah
name: "${name} ${bms_name} residual capacity"
battery_capacity:
id: bms${bms_id}_battery_capacity
name: "${name} ${bms_name} battery capacity"
rated_capacity:
name: "${name} ${bms_name} rated capacity"
state_of_charge:
id: bms${bms_id}_state_of_charge
name: "${name} ${bms_name} state of charge"
charging_cycles:
id: bms${bms_id}_charging_cycles
name: "${name} ${bms_name} charging cycles"
state_of_health:
name: "${name} ${bms_name} state of health"
port_voltage:
name: "${name} ${bms_name} port voltage"
# Required sensors cannot be retrieved from BMS
# max_charge_current
- platform: template
id: bms${bms_id}_max_charge_current
name: "${name} ${bms_name} max charge current"
update_interval: ${bms_update_interval}
accuracy_decimals: 0
unit_of_measurement: A
icon: mdi:current-dc
filters:
- or:
- throttle: 10s
- delta: 1
lambda: return ${bms_max_charge_current};
# max_discharge_current
- platform: template
id: bms${bms_id}_max_discharge_current
name: "${name} ${bms_name} max discharge current"
update_interval: ${bms_update_interval}
accuracy_decimals: 0
unit_of_measurement: A
icon: mdi:current-dc
filters:
- or:
- throttle: 10s
- delta: 1
lambda: return ${bms_max_discharge_current};
# cell_ovp
- platform: template
id: bms${bms_id}_cell_ovp
name: "${name} ${bms_name} cell ovp"
update_interval: ${bms_update_interval}
accuracy_decimals: 3
unit_of_measurement: V
device_class: voltage
filters:
- or:
- throttle: 10s
- delta: 0.001
lambda: return ${bms_cell_ovp};
# cell_uvp
- platform: template
id: bms${bms_id}_cell_uvp
name: "${name} ${bms_name} cell uvp"
update_interval: ${bms_update_interval}
accuracy_decimals: 3
unit_of_measurement: V
device_class: voltage
filters:
- or:
- throttle: 10s
- delta: 0.001
lambda: return ${bms_cell_uvp};
# balance_trigger_voltage
- platform: template
id: bms${bms_id}_balance_trigger_voltage
name: "${name} ${bms_name} balance trigger voltage"
update_interval: ${bms_update_interval}
accuracy_decimals: 3
unit_of_measurement: V
device_class: voltage
filters:
- or:
- throttle: 10s
- delta: 0.001
lambda: return ${bms_balance_trigger_voltage};
# FAKE errors_bitmask
# Alarm management is not supported at this time
# Internal : only specifying an id without a name will implicitly set this to true.
- platform: template
id: bms${bms_id}_yambms_errors_bitmask
update_interval: ${bms_update_interval}
accuracy_decimals: 0
icon: mdi:alert-circle-outline
filters:
- or:
- throttle: 10s
- delta: 1
lambda: return 0;
binary_sensor:
# Required sensors cannot be retrieved from BMS
# online_status
- platform: template
id: bms${bms_id}_online_status
name: "${name} ${bms_name} online status"
lambda: |-
if (id(bms${bms_id}_total_voltage).state > 0)
return true;
else
return false;
# equalizing
- platform: template
id: bms${bms_id}_equalizing
name: "${name} ${bms_name} balancing"
lambda: return false;
# bms_switch_charging
- platform: template
id: bms${bms_id}_charging_allowed
name: "${name} ${bms_name} charging"
lambda: return true;
# bms_switch_discharging
- platform: template
id: bms${bms_id}_discharging_allowed
name: "${name} ${bms_name} discharging"
lambda: return true;
+48 -4
View File
@@ -1,5 +1,5 @@
# Updated : 2025.01.25
# Version : 1.1.3
# Updated : 2025.06.12
# Version : 1.1.6
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -43,7 +43,35 @@ modbus_controller:
on_offline:
then:
- logger.log: "BMS ${bms_id} modbus server goes offline !"
- lambda: id(bms${bms_id}_online_status).publish_state(false);
- lambda: |-
id(bms${bms_id}_online_status).publish_state(false);
id(bms${bms_id}_charging_allowed).publish_state(false);
id(bms${bms_id}_discharging_allowed).publish_state(false);
id(bms${bms_id}_equalizing).publish_state(false);
id(bms${bms_id}_total_voltage).publish_state(0);
id(bms${bms_id}_current).publish_state(0);
id(bms${bms_id}_power).publish_state(0);
id(bms${bms_id}_battery_soc).publish_state(0);
id(bms${bms_id}_battery_capacity).publish_state(0);
id(bms${bms_id}_capacity_remaining_ah).publish_state(0);
id(bms${bms_id}_charging_cycles).publish_state(0);
id(bms${bms_id}_max_charge_current).publish_state(0);
id(bms${bms_id}_max_discharge_current).publish_state(0);
id(bms${bms_id}_max_cell_voltage).publish_state(0);
id(bms${bms_id}_max_voltage_cell).publish_state(0);
id(bms${bms_id}_min_cell_voltage).publish_state(0);
id(bms${bms_id}_min_voltage_cell).publish_state(0);
id(bms${bms_id}_min_temperature).publish_state(0);
id(bms${bms_id}_min_temperature_sensor).publish_state(0);
id(bms${bms_id}_max_temperature).publish_state(0);
id(bms${bms_id}_max_temperature_sensor).publish_state(0);
id(bms${bms_id}_cell_ovp).publish_state(0);
id(bms${bms_id}_cell_uvp).publish_state(0);
id(bms${bms_id}_balance_trigger_voltage).publish_state(0);
id(bms${bms_id}_yambms_errors_bitmask).publish_state(0);
id(bms${bms_id}_charging_power).publish_state(0);
id(bms${bms_id}_discharging_power).publish_state(0);
id(bms${bms_id}_battery_soh).publish_state(0);
# +--------------------------------------+
# | Component entities |
@@ -132,7 +160,7 @@ sensor:
- platform: modbus_controller
modbus_controller_id: modbus_controller${bms_id}
id: bms${bms_id}_battery_soc
name: "${name} ${bms_name} SoC"
name: "${name} ${bms_name} Battery SoC"
register_type: read
address: 11
value_type: U_WORD
@@ -442,3 +470,19 @@ sensor:
- or:
- throttle: 10s
- delta: 0.01
# battery_soh
- platform: modbus_controller
modbus_controller_id: modbus_controller${bms_id}
id: bms${bms_id}_battery_soh
name: "${name} ${bms_name} Battery SoH"
register_type: read
address: 33
value_type: U_WORD
accuracy_decimals: 0
unit_of_measurement: '%'
device_class: battery
filters:
- multiply: 1
- or:
- throttle: 10s
- delta: 1
@@ -0,0 +1,56 @@
# Updated : 2025.06.01
# Version : 1.1.1
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
# +--------------------------------------+
# | BASEN Errors Bitmask |
# +--------------------------------------+
# equals
# +--------------------------------------+
# | YamBMS Errors Bitmask (16bit) |
# +--------------------------------------+
# Bit 0 General alarm 0000 0000 0000 0001 0x0001
# Bit 1 Battery high voltage alarm 0000 0000 0000 0010 0x0002
# Bit 2 Battery low voltage alarm 0000 0000 0000 0100 0x0004
# Bit 3 Battery high temperature alarm 0000 0000 0000 1000 0x0008
# Bit 4 Battery low temperature alarm 0000 0000 0001 0000 0x0010
# Bit 5 Battery high temperature charge alarm 0000 0000 0010 0000 0x0020
# Bit 6 Battery low temperature charge alarm 0000 0000 0100 0000 0x0040
# Bit 7 Battery high discharge current alarm 0000 0000 1000 0000 0x0080
# Bit 8 Battery high charge current alarm 0000 0001 0000 0000 0x0100
# Bit 9 Contactor alarm 0000 0010 0000 0000 0x0200
# Bit 10 Short circuit alarm 0000 0100 0000 0000 0x0400
# Bit 11 BMS internal alarm 0000 1000 0000 0000 0x0800
# Bit 12 Cell imbalance alarm 0001 0000 0000 0000 0x1000
# Bit 13 Reserved 0010 0000 0000 0000 0x2000
# Bit 14 Reserved 0100 0000 0000 0000 0x4000
# Bit 15 Reserved 1000 0000 0000 0000 0x8000
sensor:
- platform: template
id: bms${bms_id}_yambms_errors_bitmask
name: "${name} ${bms_name} YamBMS Errors Bitmask"
update_interval: ${bms_update_interval}
accuracy_decimals: 0
icon: mdi:alert-circle-outline
filters:
- or:
- throttle: 10s
- delta: 1
lambda: |-
return id(bms${bms_id}_errors_bitmask).state;
@@ -0,0 +1,159 @@
# Updated : 2025.06.10
# Version : 1.1.2
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
# +--------------------------------------+
# | DEYE CAN PCS Errors Bitmask (64bit) |
# +--------------------------------------+
# Bit 0 Cell overvoltage 0000 0000 0000 0001 0x0001
# Bit 1 Cell undervoltage 0000 0000 0000 0010 0x0002
# Bit 2 Module overvoltage 0000 0000 0000 0100 0x0004
# Bit 3 Module undervoltage 0000 0000 0000 1000 0x0008
# Bit 4 Charge overcurrent 0000 0000 0001 0000 0x0010
# Bit 5 Discharge overcurrent 0000 0000 0010 0000 0x0020
# Bit 6 Cell overtemperature charge 0000 0000 0100 0000 0x0040
# Bit 7 Cell undertemperature charge 0000 0000 1000 0000 0x0080
# Bit 8 Cell overtemperature discharge 0000 0001 0000 0000 0x0100
# Bit 9 Cell undertemperature discharge 0000 0010 0000 0000 0x0200
# Bit 10 Cell voltage overdifference 0000 0100 0000 0000 0x0400
# Bit 11 Cell temperature overdifference 0000 1000 0000 0000 0x0800
# Bit 12 MOSFET overtemperature 0001 0000 0000 0000 0x1000
# Bit 13 Heating film overtemperature 0010 0000 0000 0000 0x2000
# Bit 14 0100 0000 0000 0000 0x4000
# Bit 15 1000 0000 0000 0000 0x8000
# Bit 16 AFE communication fail 0001 0000 0000 0000 0000 0x10000
# Bit 17 Cell voltage sampling fail 0010 0000 0000 0000 0000 0x20000
# Bit 18 Temperature sampling fail 0100 0000 0000 0000 0000 0x40000
# Bit 19 MOSFET short circuit 1000 0000 0000 0000 0000 0x80000
# Bit 20 EEPROM error 0001 0000 0000 0000 0000 0000 0x100000
# Bit 21 Internal communication fail 0010 0000 0000 0000 0000 0000 0x200000
# Bit 22 PCS communication fail 0100 0000 0000 0000 0000 0000 0x400000
# Bit 23 Master address repeat 1000 0000 0000 0000 0000 0000 0x800000
# Bit 24 Cell high voltage 0x1000000
# Bit 25 Cell low voltage 0x2000000
# Bit 26 Module high voltage 0x4000000
# Bit 27 Module low voltage 0x8000000
# Bit 28 Charge high current 0x10000000
# Bit 29 Discharge high current 0x20000000
# Bit 30 Cell high temperature charge 0x40000000
# Bit 31 Cell low temperature charge 0x80000000
# Bit 32 Cell high temperature discharge 0x100000000
# Bit 33 Cell low temperature discharge 0x200000000
# Bit 34 Cell voltage high difference 0x400000000
# Bit 35 Cell temperature high difference 0x800000000
# Bit 36 MOSFET high temperature 0x1000000000
# Bit 37 Heating film high temperature 0x2000000000
# Bit 38 Heat MOS adheasion 0x4000000000
# Bit 49 Heat error 0x8000000000
# +--------------------------------------+
# | YamBMS Errors Bitmask (16bit) |
# +--------------------------------------+
# Bit 0 General alarm 0000 0000 0000 0001 0x0001
# Bit 1 Battery high voltage alarm 0000 0000 0000 0010 0x0002
# Bit 2 Battery low voltage alarm 0000 0000 0000 0100 0x0004
# Bit 3 Battery high temperature alarm 0000 0000 0000 1000 0x0008
# Bit 4 Battery low temperature alarm 0000 0000 0001 0000 0x0010
# Bit 5 Battery high temperature charge alarm 0000 0000 0010 0000 0x0020
# Bit 6 Battery low temperature charge alarm 0000 0000 0100 0000 0x0040
# Bit 7 Battery high discharge current alarm 0000 0000 1000 0000 0x0080
# Bit 8 Battery high charge current alarm 0000 0001 0000 0000 0x0100
# Bit 9 Contactor alarm 0000 0010 0000 0000 0x0200
# Bit 10 Short circuit alarm 0000 0100 0000 0000 0x0400
# Bit 11 BMS internal alarm 0000 1000 0000 0000 0x0800
# Bit 12 Cell imbalance alarm 0001 0000 0000 0000 0x1000
# Bit 13 Reserved 0010 0000 0000 0000 0x2000
# Bit 14 Reserved 0100 0000 0000 0000 0x4000
# Bit 15 Reserved 1000 0000 0000 0000 0x8000
sensor:
- platform: template
id: bms${bms_id}_yambms_errors_bitmask
name: "${name} ${bms_name} YamBMS Errors Bitmask"
update_interval: ${bms_update_interval}
accuracy_decimals: 0
icon: mdi:alert-circle-outline
filters:
- or:
- throttle: 10s
- delta: 1
lambda: |-
uint64_t bms_errors_bitmask = id(deye${deye_id}_bms_errors_bitmask).state;
uint16_t yambms_errors_bitmask = 0;
if (bms_errors_bitmask > 0)
{
// General alarm:
// Unused
// High voltage
if (bms_errors_bitmask & 0x0005) yambms_errors_bitmask |= 0x0002; // Cell or module
// Low voltage
if (bms_errors_bitmask & 0x000A) yambms_errors_bitmask |= 0x0004; // Cell or module
// High temperature:
// - Cell overtemperature discharge
// - MOSFET overtemperature
// - Heating film overtemperature
// - Cell high temperature discharge
// - MOSFET high temperature
// - Heating film high temperature
if (bms_errors_bitmask & 0x3100003100) yambms_errors_bitmask |= 0x0008;
// Low temperature:
// - Cell undertemperature discharge
// - Cell low temperature discharge
if (bms_errors_bitmask & 0x200000200) yambms_errors_bitmask |= 0x0010;
// High temperature charge:
// - Cell overtemperature charge
// - Cell high temperature charge
if (bms_errors_bitmask & 0x40000040) yambms_errors_bitmask |= 0x0020;
// Low temperature charge:
// - Cell undertemperature charge
// - Cell low temperature charge
if (bms_errors_bitmask & 0x80000080) yambms_errors_bitmask |= 0x0040;
// High discharge current:
// - Discharge overcurrent
// - Discharge high current
if (bms_errors_bitmask & 0x20000020) yambms_errors_bitmask |= 0x0080;
// High charge current:
// - Charge overcurrent
// - Charge high current
if (bms_errors_bitmask & 0x10000010) yambms_errors_bitmask |= 0x0100;
// Contactor:
// Unused
// Short circuit alarm:
// - MOSFET short circuit
if (bms_errors_bitmask & 0x80000) yambms_errors_bitmask |= 0x0400;
// BMS internal alarm:
// - AFE communication fail
// - Cell voltage sampling fail
// - Temperature sampling fail
// - EEPROM error
// - Internal communication fail
// - PCS communication fail
if (bms_errors_bitmask & 0x770000) yambms_errors_bitmask |= 0x0800;
// Cell imbalance alarm:
// - Cell overvoltage
// - Cell undervoltage
// - Cell voltage overdifference
// - Cell voltage high difference
// - Cell temperature overdifference
// - Cell temperature high difference
if (bms_errors_bitmask & 0xC00000C03) yambms_errors_bitmask |= 0x1000;
}
return yambms_errors_bitmask;
+4 -4
View File
@@ -1,5 +1,5 @@
# Updated : 2025.01.25
# Version : 1.1.2
# Updated : 2025.06.10
# Version : 1.1.3
# GitHub : https://github.com/syssi/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -21,7 +21,7 @@
# | JBD UART Errors Bitmask (16bit) |
# +--------------------------------------+
# Bit 0 Cell overvoltage 0000 0000 0000 0001 0x0001
# Bit 0 Cell overvoltage 0000 0000 0000 0001 0x0001
# Bit 1 Cell undervoltage 0000 0000 0000 0010 0x0002
# Bit 2 Pack overvoltage 0000 0000 0000 0100 0x0004
# Bit 3 Pack undervoltage 0000 0000 0000 1000 0x0008
@@ -42,7 +42,7 @@
# | YamBMS Errors Bitmask (16bit) |
# +--------------------------------------+
# Bit 0 General alarm 0000 0000 0000 0001 0x0001
# Bit 0 General alarm 0000 0000 0000 0001 0x0001
# Bit 1 Battery high voltage alarm 0000 0000 0000 0010 0x0002
# Bit 2 Battery low voltage alarm 0000 0000 0000 0100 0x0004
# Bit 3 Battery high temperature alarm 0000 0000 0000 1000 0x0008
@@ -1,5 +1,5 @@
# Updated : 2025.01.25
# Version : 1.1.2
# Updated : 2025.06.10
# Version : 1.1.3
# GitHub : https://github.com/syssi/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -18,10 +18,10 @@
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
# +--------------------------------------+
# | JK-ALL BLE Errors Bitmask (16bit) |
# | JK BLE Errors Bitmask (16bit) |
# +--------------------------------------+
# Bit 0 Charge overtemperature 0000 0000 0000 0001 0x0001
# Bit 0 Charge overtemperature 0000 0000 0000 0001 0x0001
# Bit 1 Charge undertemperature 0000 0000 0000 0010 0x0002
# Bit 2 Coprocessor communication error 0000 0000 0000 0100 0x0004
# Bit 3 Cell undervoltage 0000 0000 0000 1000 0x0008
@@ -42,7 +42,7 @@
# | YamBMS Errors Bitmask (16bit) |
# +--------------------------------------+
# Bit 0 General alarm 0000 0000 0000 0001 0x0001
# Bit 0 General alarm 0000 0000 0000 0001 0x0001
# Bit 1 Battery high voltage alarm 0000 0000 0000 0010 0x0002
# Bit 2 Battery low voltage alarm 0000 0000 0000 0100 0x0004
# Bit 3 Battery high temperature alarm 0000 0000 0000 1000 0x0008
@@ -94,4 +94,4 @@ sensor:
if (bms_errors_bitmask & 0x8000) yambms_errors_bitmask |= 0x0400;
}
return yambms_errors_bitmask;
return yambms_errors_bitmask;
@@ -1,5 +1,5 @@
# Updated : 2025.01.25
# Version : 1.1.2
# Updated : 2025.06.10
# Version : 1.1.3
# GitHub : https://github.com/syssi/esphome-jk-bms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -17,11 +17,11 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
# +--------------------------------------+
# | JK-PB RS485 Errors Bitmask (24bit) |
# +--------------------------------------+
# +----------------------------------------+
# | JK RS485 Modbus Errors Bitmask (24bit) |
# +----------------------------------------+
# Bit 0 Wire resistance 0000 0000 0000 0001 0x0001
# Bit 0 Wire resistance 0000 0000 0000 0001 0x0001
# Bit 1 MOS OTP 0000 0000 0000 0010 0x0002
# Bit 2 Cell quantity 0000 0000 0000 0100 0x0004
# Bit 3 Current sensor error 0000 0000 0000 1000 0x0008
@@ -50,7 +50,7 @@
# | YamBMS Errors Bitmask (16bit) |
# +--------------------------------------+
# Bit 0 General alarm 0000 0000 0000 0001 0x0001
# Bit 0 General alarm 0000 0000 0000 0001 0x0001
# Bit 1 Battery high voltage alarm 0000 0000 0000 0010 0x0002
# Bit 2 Battery low voltage alarm 0000 0000 0000 0100 0x0004
# Bit 3 Battery high temperature alarm 0000 0000 0000 1000 0x0008
Loaded 100 of 185 files, more files were not shown because too many files have changed in this diff. Show more